IB Physics notes › Glossary

Glossary

Key terms in plain words, with the lesson that teaches each one.

A

absolute uncertainty
The uncertainty in a quantity given in the quantity's own unit, such as the 0.01 A in (0.34 ± 0.01) A.Taught in 6.3 Uncertainties and errors
absorption spectrum
A continuous spectrum crossed by dark lines, formed when light passes through a cooler gas whose atoms absorb photons of particular wavelengths.Taught in 5.2 Atomic spectra and energy levels
acceleration
The rate of change of a body's velocity, a vector in m s−2\text{m s}^{-2}; it can change the speed, the direction or both, and a negative value does not by itself mean slowing down.Taught in 1.1 Describing motion
acceleration of free fall
The acceleration gg of a body acted on only by its weight; near Earth's surface it is 9.8 m s−29.8\ \text{m s}^{-2} downwards (data booklet), the same for every body.Taught in 1.2 Equations of motion and motion graphs
accuracy
How close a measurement, or the mean of several, is to the true value; systematic errors reduce it.Taught in 6.3 Uncertainties and errors
activity
The number of nuclei in a radioactive sample that decay per unit time, measured in becquerels (1 Bq is one decay per second).Taught in 5.8 Activity and half-life
adiabatic process
A change of state with no thermal energy transferred to or from the gas (Q=0Q = 0), so ΔU=−W\Delta U = -W; for a monatomic ideal gas changing reversibly (not a free expansion), PV53PV^{\frac{5}{3}} stays constant.Taught in 2.11 Gas processes and heat engines
albedo
The fraction of the radiation falling on a surface or planet that is scattered back rather than absorbed: total scattered power divided by total incident power. It has no unit and lies between 0 and 1.Taught in 2.5 Emissivity, albedo and Earth's energy balance
alpha decay
Radioactive decay in which a nucleus emits an alpha particle, so its proton number falls by 2 and its nucleon number by 4.Taught in 5.7 Radioactive decay
alpha particle
A particle of 2 protons and 2 neutrons, the same as a helium-4 nucleus, with charge +2e+2e; strongly ionising and stopped by a sheet of paper.Taught in 5.7 Radioactive decay
alternating emf
An emf that reverses direction regularly; a coil turning steadily in a uniform field gives a sinusoidal one whose peak rises with the rotation frequency and the field strength.Taught in 4.10 Generators and alternating emf
amount of substance
The number of particles in a sample counted in moles, n=NNAn = \frac{N}{N_\text{A}}, where NN is the number of particles and NAN_\text{A} the Avogadro constant.Taught in 2.7 Pressure, amount of substance and the ideal gas model
amplitude
The maximum displacement of an oscillating object or particle from its equilibrium position: half the distance between the two extreme positions. Written x0x_0 for an oscillator and often AA for a wave.Taught in 3.1 Simple harmonic motion
angular acceleration
The rate of change of angular velocity, α=ΔωΔt\alpha = \frac{\Delta\omega}{\Delta t}, measured in rad s⁻²; it is caused by a resultant torque.Taught in 1.13 Rotational motion and moment of inertia
angular displacement
The angle a rotating body turns through, Δθ=θf−θi\Delta\theta = \theta_\text{f} - \theta_\text{i}, measured in radians, with a sign that shows the sense of rotation (for example anticlockwise positive).Taught in 1.13 Rotational motion and moment of inertia
angular frequency
ω=2πf=2πT\omega = 2\pi f = \frac{2\pi}{T}, in rad s⁻¹; for an oscillation it measures how quickly the cycles repeat, not the rate of any real rotation.Taught in 3.1 Simple harmonic motion
angular momentum
The rotational partner of linear momentum: a body's moment of inertia times its angular speed, L=IωL = I\omega, measured in kg m² s⁻¹.Taught in 1.14 Angular momentum and rotational kinetic energy
antineutrino
The antiparticle of the neutrino: uncharged, with a very small mass, and emitted with an electron in beta-minus decay.Taught in 5.7 Radioactive decay
antinode
A point on a standing wave where the amplitude is largest, halfway between two neighbouring nodes.Taught in 3.7 Standing waves
apparent brightness
The power received from a source per unit area at the observer, in W m−2\text{W m}^{-2}; for a source radiating equally in all directions, b=L4πd2b = \frac{L}{4\pi d^{2}}, so it depends on distance as well as luminosity.Taught in 2.4 Thermal radiation and black bodies
area under a graph
The area between a graph line and the horizontal axis, equal to the product of the two axis quantities added up: under a velocity–time graph it is the displacement, and under an acceleration–time graph the change in velocity.Taught in 1.2 Equations of motion and motion graphs
atomic energy level
One of the discrete energies that an electron bound in an atom is allowed to have. The lowest is the ground state; the higher ones are excited states.Taught in 5.2 Atomic spectra and energy levels
atomic transition
A change of an electron from one energy level of an atom to another. Moving down emits one photon whose energy equals the gap; moving up needs exactly that energy, for example from an absorbed photon.Taught in 5.2 Atomic spectra and energy levels
Avogadro constant
The number of particles in one mole of any substance, NA=6.02⋅1023 mol−1N_\text{A} = \pu{6.02e23 mol-1}.Taught in 2.7 Pressure, amount of substance and the ideal gas model

B

background radiation
Radiation that is always present from sources such as radon gas, rocks, cosmic rays and food; subtract it from a measured count rate to find the count rate from a source.Taught in 5.8 Activity and half-life
beta-minus decay
Radioactive decay in which a neutron in the nucleus changes into a proton, emitting an electron and an antineutrino; the proton number rises by 1 and the nucleon number is unchanged.Taught in 5.7 Radioactive decay
beta-plus decay
Radioactive decay in which a proton in the nucleus changes into a neutron, emitting a positron and a neutrino; the proton number falls by 1 and the nucleon number is unchanged.Taught in 5.7 Radioactive decay
binding energy
The minimum energy needed to separate a nucleus completely into its individual nucleons, equal to the energy released when the nucleus forms from them: EB=Δm c2E_\text{B} = \Delta m\, c^{2}, where Δm\Delta m is the mass defect.Taught in 5.6 Binding energy and mass defect
binding energy per nucleon
The binding energy of a nucleus divided by its nucleon number; the higher it is, the more tightly bound the nucleus, with a peak of about 8.8 MeV near iron-56.Taught in 5.6 Binding energy and mass defect
black body
An idealised object that absorbs all the electromagnetic radiation falling on it and, at any given temperature, emits the most radiation that any surface can.Taught in 2.4 Thermal radiation and black bodies
Bohr model
A model of the hydrogen atom in which the electron can only move in circular orbits whose angular momentum is mvr=nh2πmvr = \frac{nh}{2\pi}, which gives discrete energy levels E=−13.6n2 eVE = -\frac{13.6}{n^{2}}\ \text{eV}.Taught in 5.3 Nuclear radius and the Bohr model
Boltzmann constant
The constant kB=1.38×10−23 J K−1k_\text{B} = 1.38 \times 10^{-23}\ \text{J K}^{-1} linking absolute temperature to the average kinetic energy of one particle; it is per particle, unlike the gas constant RR, which is per mole.Taught in 2.1 Particles, density and temperature
buoyancy
The upward force a fluid exerts on a body in it, equal to the weight of fluid displaced, Fb=ρVgF_\text{b} = \rho V g with ρ\rho the density of the fluid.Taught in 1.5 Contact and field forces

C

Carnot cycle
A theoretical reversible cycle of two isothermal and two adiabatic stages, whose efficiency 1−TcTh1 - \frac{T_\text{c}}{T_\text{h}} (temperatures in kelvin) is the maximum for any heat engine between those reservoirs.Taught in 2.11 Gas processes and heat engines
centre of mass
The point at which the whole mass of a body can be taken to act; for a uniform sphere it is the centre.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
chain reaction
A self-sustaining series of fissions in which neutrons released by one fission cause further fissions; its rate is steady when, on average, exactly one neutron per fission causes another fission.Taught in 5.11 Fission and nuclear power
charge carrier
A charged particle that is free to move through a material and so carries a current, such as a free electron in a metal or an ion in a solution.Taught in 2.12 Current, potential difference and emf
coefficient of friction
A number with no unit that links friction to the normal force: static friction is at most μsFN\mu_\text{s}F_\text{N}, and sliding friction equals μdFN\mu_\text{d}F_\text{N}.Taught in 1.5 Contact and field forces
coherence
Two sources are coherent when they have the same frequency and a constant phase difference, which a steady interference pattern needs.Taught in 3.5 Superposition and double-slit interference
Compton scattering
The scattering of an X-ray or gamma-ray photon by a free electron, in which the photon gives some energy and momentum to the electron and so leaves with a longer wavelength; it is evidence that photons carry momentum.Taught in 5.5 Matter waves and Compton scattering
conduction
The transfer of thermal energy through a material by collisions between neighbouring particles (and, in metals, free electrons), from particles with more average kinetic energy to those with less, with no bulk movement of the material.Taught in 2.3 Conduction and convection
conductor
A material with a large number of charge carriers that are free to move through it, such as the free electrons in a metal, so a potential difference produces a significant current.Taught in 2.13 Resistance, resistivity and Ohm's law
conservation of angular momentum
The total angular momentum of a system stays constant unless a resultant external torque acts on it, so if its moment of inertia falls, its angular speed rises.Taught in 1.14 Angular momentum and rotational kinetic energy
conservation of charge
The total electric charge of an isolated system stays constant: charge can move from one body to another but is never created or destroyed.Taught in 4.4 Electric charge and Coulomb's law
conservation of energy
The principle that energy cannot be created or destroyed, only transferred between bodies or transformed between forms, so the total energy of a system that no energy enters or leaves stays constant.Taught in 1.9 Work and energy transfer
conservation of momentum
The rule that the total momentum of a system stays constant when no resultant external force acts on it; it holds in every collision and explosion of an isolated system.Taught in 1.6 Momentum and impulse
constructive interference
Waves arriving in phase add to a larger amplitude; for sources in phase it happens where the path difference is nλn\lambda.Taught in 3.5 Superposition and double-slit interference
control rod
A rod of a neutron-absorbing material, such as boron or cadmium, that is raised or lowered in a reactor core to control the rate of fission.Taught in 5.11 Fission and nuclear power
convection
The transfer of thermal energy by the bulk movement of a liquid or gas: warmer fluid usually expands, becomes less dense and rises, while cooler, denser fluid sinks to replace it.Taught in 2.3 Conduction and convection
correlation
A trend between two variables, positive when one tends to rise as the other rises and negative when it tends to fall; it does not by itself show that one causes the other.Taught in 6.4 Graphs and data analysis
Coulomb's law
The electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of their separation, F=kq1q2r2F = k\frac{q_1 q_2}{r^{2}}, where k=14πε0k = \frac{1}{4\pi\varepsilon_0} in a vacuum; like charges repel and unlike charges attract.Taught in 4.4 Electric charge and Coulomb's law
count rate
The number of counts a detector records per unit time; the part due to a source is less than the source's activity because the detector catches only some of its radiation.Taught in 5.8 Activity and half-life
critical angle
The angle of incidence, in the medium with the larger refractive index, that gives an angle of refraction of 90∘90^{\circ}; sin⁡C=n2n1\sin C = \frac{n_2}{n_1}.Taught in 3.4 Reflection, refraction and Snell's law
critical damping
The amount of damping at which a displaced system returns to equilibrium in the shortest possible time without oscillating.Taught in 3.8 Resonance and damping

D

damping
The loss of energy from an oscillating system through resistive forces such as friction or air resistance, so its amplitude decreases; in a driven system it lowers the resonance peak and shifts it to a slightly lower frequency.Taught in 3.8 Resonance and damping
de Broglie wavelength
The wavelength of a moving particle, λ=hp\lambda = \frac{h}{p}, where hh is the Planck constant and pp is the particle's momentum.Taught in 5.5 Matter waves and Compton scattering
decay constant
The rate of decay per undecayed nucleus of a nuclide, λ=A/N\lambda = A/N, in s−1\text{s}^{-1}; it is close to the probability that a nucleus decays in unit time only when λt\lambda t is small.Taught in 5.10 The radioactive decay law
density
The mass per unit volume of a substance, ρ=mV\rho = \frac{m}{V}, measured in kg m−3\text{kg m}^{-3}.Taught in 2.1 Particles, density and temperature
destructive interference
Waves arriving in antiphase partly or fully cancel; for sources in phase it happens where the path difference is (n+12)λ(n + \frac{1}{2})\lambda.Taught in 3.5 Superposition and double-slit interference
diffraction
The spreading of a wave through a gap or round the edge of an obstacle, most noticeable when the gap or obstacle is about one wavelength across.Taught in 3.4 Reflection, refraction and Snell's law
diffraction grating
A plate with a large number of equally spaced parallel slits, a distance dd apart, giving sharp bright maxima at the angles where nλ=dsin⁡θn\lambda = d\sin\theta.Taught in 3.6 Single-slit diffraction and diffraction gratings
direct proportionality
A relationship y=kxy = kx with kk constant: doubling xx doubles yy, and the graph is a straight line through the origin.Taught in 6.4 Graphs and data analysis
displacement
The change in a body's position, a vector from where it started to where it finished, whatever path it took.Taught in 1.1 Describing motion
distance
The total length of the path a body travels, a scalar that never decreases, however often the body changes direction.Taught in 1.1 Describing motion
distance of closest approach
In a head-on collision with a nucleus treated as fixed, the distance between a charged particle and the centre of the nucleus at the instant the particle stops, when all its initial kinetic energy has become electric potential energy.Taught in 5.3 Nuclear radius and the Bohr model
Doppler effect
The change in the observed frequency of a wave (and, for a moving source or for light, its wavelength) when the source and the observer move towards or away from each other: higher when they approach, lower when they move apart.Taught in 3.9 The Doppler effect
double-slit interference
The evenly spaced bright and dark fringes formed when coherent light passes through two narrow slits, with fringe separation s=λDds = \frac{\lambda D}{d}.Taught in 3.5 Superposition and double-slit interference

E

earthing
Connecting a conductor to the Earth (grounding), so that electrons can flow between the conductor and the Earth; the Earth is so large that its own charge does not change noticeably.Taught in 4.4 Electric charge and Coulomb's law
efficiency
The ratio of the useful energy (or power) output of a device to the total energy (or power) input, η\eta; it has no unit and is always less than 1 for a real machine, because some input energy is dissipated.Taught in 1.11 Power, efficiency and energy density
elastic collision
A collision in which the total kinetic energy of the bodies is the same afterwards as before; momentum is also conserved if no resultant external force acts, and head-on the bodies separate at the same relative speed at which they approached.Taught in 1.7 Collisions and explosions
elastic potential energy
The energy stored in a stretched or compressed body such as a spring; for a spring obeying Hooke's law it is EH=12k(Δx)2E_\text{H} = \tfrac{1}{2}k(\Delta x)^{2}.Taught in 1.10 Mechanical energy
electric charge
A property of matter, positive or negative, that makes particles exert electric forces on each other; it is measured in coulombs (C), and an electron carries −1.60×10−19 C-1.60 \times 10^{-19}\ \text{C}.Taught in 2.12 Current, potential difference and emf
electric current
The rate of flow of charge past a point, I=ΔqΔtI = \frac{\Delta q}{\Delta t}, measured in amperes, where 1 A=1 C s−11\ \text{A} = 1\ \text{C s}^{-1}.Taught in 2.12 Current, potential difference and emf
electric field
A region of space in which an electric charge experiences an electric force.Taught in 4.5 Electric and magnetic field lines
electric field line
A line showing the direction of the force on a positive charge at each point; lines start on positive charges and end on negative charges (or at infinity), never cross, and are closer together where the field is stronger.Taught in 4.5 Electric and magnetic field lines
electric field strength
The electric force per unit charge on a small positive test charge at a point, E=FqE = \frac{F}{q}; a vector, measured in N C−1\text{N C}^{-1} or V m−1\text{V m}^{-1}.Taught in 4.5 Electric and magnetic field lines
electric force
The force between charged bodies, or on a charge in an electric field, whether or not the charge moves; like charges repel and unlike charges attract.Taught in 1.5 Contact and field forces
electric potential
The work needed per coulomb to move a small positive test charge from infinity to a point, zero at infinity; a scalar measured in volts, Ve=kQrV_\text{e} = \frac{kQ}{r} for a point charge.Taught in 4.6 Electric potential and potential energy
electric potential energy
The work done to assemble a system of charges by bringing them from infinite separation; for two point charges Ep=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}, positive for like charges and negative for unlike charges.Taught in 4.6 Electric potential and potential energy
electrical power
The rate at which a component transfers electrical energy to other forms, such as thermal energy in a resistor: P=IV=I2R=V2RP = IV = I^2R = \frac{V^2}{R}, measured in watts.Taught in 2.14 Electrical power and circuits
electromagnetic spectrum
The whole range of electromagnetic waves, from gamma rays (shortest wavelength) through X-rays, ultraviolet, visible, infrared and microwaves to radio waves (longest), all with the same speed in a vacuum.Taught in 3.3 Travelling waves
electromagnetic wave
A transverse wave of oscillating electric and magnetic fields, perpendicular to each other and to the direction of travel, that needs no medium and crosses a vacuum at speed cc.Taught in 3.3 Travelling waves
electronvolt
The energy gained by one electron accelerated through a potential difference of 1 V, equal to 1.60×10−191.60 \times 10^{-19} J.Taught in 6.1 Units, measurement and estimation
electrostatic induction
The separation of charge in a conductor caused by a nearby charged body, without contact: charge opposite to the body's gathers on the near side and like charge on the far side, while the conductor's total charge is unchanged.Taught in 4.4 Electric charge and Coulomb's law
elementary charge
The size of the charge on a proton or an electron, e=1.60×10−19 Ce = 1.60 \times 10^{-19}\ \text{C}: the smallest charge found on any free particle.Taught in 4.4 Electric charge and Coulomb's law
emf
The energy transferred from other forms to electrical energy per unit charge by a source such as a cell, measured in volts; despite its name it is not a force, and for a real cell it equals the pd across the terminals only when no current flows.Taught in 2.12 Current, potential difference and emf
emission spectrum
The range of wavelengths a source emits, often shown as intensity against wavelength; a black body gives a continuous spectrum, while the atoms of a hot, low-density gas give lines at certain wavelengths only.Taught in 2.4 Thermal radiation and black bodies
emissivity
How well a surface radiates compared with a black body: the power it emits from each square metre divided by σT4\sigma T^{4}, the black-body value at the same temperature. It has no unit and lies between 0 and 1.Taught in 2.5 Emissivity, albedo and Earth's energy balance
energy
A scalar property of a body or system that measures its capacity to do work; it can be transferred or change form but never created or destroyed, and its unit is the joule (J).Taught in 1.9 Work and energy transfer
energy density
The energy released per unit volume of a fuel, in J m−3\text{J m}^{-3}; it differs from specific energy, the energy released per unit mass in J kg−1\text{J kg}^{-1}, by a factor of the fuel's density.Taught in 1.11 Power, efficiency and energy density
enhanced greenhouse effect
The extra warming caused by human activities, mainly burning fossil fuels, that raise the concentrations of greenhouse gases in the atmosphere.Taught in 2.6 Greenhouse gases and the greenhouse effect
entropy
A thermodynamic quantity SS, in J K−1\text{J K}^{-1}, that measures the disorder of the particles in a system; it changes by ΔS=ΔQT\Delta S = \frac{\Delta Q}{T} when thermal energy is transferred reversibly at constant temperature, and equals kBln⁡Ωk_\text{B}\ln\Omega for a state with Ω\Omega microstates.Taught in 2.10 Entropy and the second law
equipotential surface
A surface on which every point has the same potential, so no work is done moving a mass (or, in an electric field, a charge) along it; field lines cross it at right angles.Taught in 4.2 Gravitational potential and potential energy
escape speed
The minimum speed an unpowered object needs at a point in a gravitational field to reach infinity, ignoring air resistance: vesc=2GMrv_\text{esc} = \sqrt{\frac{2GM}{r}}. It does not depend on the object's mass.Taught in 4.3 Orbits and escape speed
explosion
An event in which internal forces, using stored energy, push the parts of a system apart: with no resultant external force the total momentum is conserved, and the total kinetic energy increases.Taught in 1.7 Collisions and explosions

F

Faraday's law
The size of an induced emf equals the rate of change of flux linkage, ε=NΔΦΔt\varepsilon = N\frac{\Delta\Phi}{\Delta t}, where NN is the number of turns.Taught in 4.9 Magnetic flux, Faraday's law and Lenz's law
first law of thermodynamics
The law that the thermal energy QQ supplied to a closed system equals the increase in its internal energy ΔU\Delta U plus the work WW done by the system, Q=ΔU+WQ = \Delta U + W, where QQ is positive for energy supplied to the system and WW is positive for work done by it.Taught in 2.9 The first law of thermodynamics
fission
The splitting of a heavy nucleus into two medium-mass nuclei, usually with two or three neutrons; the products are more tightly bound, so energy is released, mostly as kinetic energy of the fragments.Taught in 5.11 Fission and nuclear power
fluid resistance
The force a gas or liquid exerts on a body moving through it, acting opposite to the body's velocity relative to the fluid and increasing with speed; air resistance and drag are examples.Taught in 1.3 Projectile motion
force
A push or pull that one body exerts on another as they interact; a vector, measured in newtons (N), where 1 N=1 kg m s−2\pu{1 N} = \pu{1 kg m s-2}.Taught in 1.4 Newton's laws and free-body diagrams
forced oscillation
An oscillation caused by an external periodic force; once steady, it has the frequency of the driving force, not the natural frequency.Taught in 3.8 Resonance and damping
fractional uncertainty
The absolute uncertainty divided by the measured value, Δxx\frac{\Delta x}{x}; it has no unit and is also called the relative uncertainty.Taught in 6.3 Uncertainties and errors
free-body diagram
A diagram of one body showing every force acting on it, and no force it exerts, as labelled arrows starting on the body.Taught in 1.4 Newton's laws and free-body diagrams
frequency
The number of complete oscillations or cycles per unit time, f=1Tf = \frac{1}{T}, measured in hertz (Hz).Taught in 3.1 Simple harmonic motion
friction
The component of the contact force parallel to a surface, opposing the sliding of the two surfaces or their tendency to slide.Taught in 1.5 Contact and field forces
fundamental frequency
An older name for the frequency of the first harmonic, the lowest-frequency standing wave a string or pipe can hold; IB Physics says first harmonic instead.Taught in 3.7 Standing waves
fusion
A nuclear reaction in which two light nuclei join to form a heavier nucleus, releasing energy because the product is more tightly bound; it needs a very high temperature and density, as in the core of a star.Taught in 5.12 Fusion and the life of stars

G

Galilean relativity
The principle that Newton's laws of motion are the same in every inertial reference frame, with events and velocities converted between frames by x′=x−vtx' = x - vt, t′=tt' = t and u′=u−vu' = u - v.Taught in 1.15 Reference frames and Galilean relativity
gamma decay
The emission of a gamma photon when a nucleus in an excited state drops to a lower energy level; the proton number and nucleon number do not change.Taught in 5.7 Radioactive decay
gas
A phase of matter with no fixed shape or volume, whose particles are far apart and move fast and randomly, with negligible forces between them except during collisions.Taught in 2.1 Particles, density and temperature
Geiger-Marsden-Rutherford experiment
Alpha particles fired at thin gold foil mostly passed straight through, but a very few bounced back, showing that an atom is mostly empty space around a tiny, dense, positive nucleus.Taught in 5.1 The nuclear atom
generator
A device in which a coil rotates in a magnetic field, so the changing flux induces an emf (sinusoidal for steady rotation in a uniform field); it transfers the work done turning the coil into electrical energy.Taught in 4.10 Generators and alternating emf
gradient
The steepness of a graph, the change in the vertical quantity divided by the change in the horizontal quantity; the gradient of a tangent gives the rate of change at one point.Taught in 1.1 Describing motion
gravitational field strength
The gravitational force per unit mass on a small point mass placed at a point, g=Fmg = \frac{F}{m}, in N kg−1\text{N kg}^{-1}; it points towards the mass causing the field.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
gravitational potential
The work done per unit mass in bringing a small mass from infinity to a point; outside a spherical mass MM, Vg=−GMrV_\text{g} = -\frac{GM}{r}. It is zero at infinity and negative everywhere else, measured in J kg−1\text{J kg}^{-1}.Taught in 4.2 Gravitational potential and potential energy
gravitational potential energy
The energy a body has because of its position in a gravitational field; close to Earth's surface its change is ΔEp=mgΔh\Delta E_\text{p} = mg\Delta h, with Δh\Delta h the vertical change in height.Taught in 1.10 Mechanical energy
greenhouse effect
The warming of a planet's surface because greenhouse gases absorb the infrared it emits and re-emit part of it back down; on Earth this natural effect keeps the surface warm enough for liquid water.Taught in 2.6 Greenhouse gases and the greenhouse effect
greenhouse gas
A gas in the atmosphere, such as water vapour, carbon dioxide, methane or nitrous oxide, whose molecules absorb infrared radiation and re-emit it in all directions; each has natural and human sources.Taught in 2.6 Greenhouse gases and the greenhouse effect

H

half-life
The time taken for the number of undecayed nuclei of a nuclide, or its activity, to fall to half; it is the same whatever the starting amount.Taught in 5.8 Activity and half-life
harmonic
One of the standing-wave patterns a string or air column can hold, numbered by nn; the first harmonic has the lowest frequency. With one node end and one antinode end, only odd nn exist.Taught in 3.7 Standing waves
heat engine
A device that takes a gas round a repeating cycle, taking in thermal energy from a hot reservoir, doing useful work and giving out the rest as thermal energy to a cold reservoir.Taught in 2.11 Gas processes and heat engines
heat exchanger
The part of a power plant where the coolant from the reactor core transfers thermal energy to water in a separate circuit, turning it to steam that drives the turbine.Taught in 5.11 Fission and nuclear power
Hertzsprung-Russell diagram
A graph of stars' luminosity, on the vertical axis, against their surface temperature, on the horizontal axis with temperature decreasing to the right; stars group into regions such as the main sequence, giants and white dwarfs.Taught in 5.13 The HR diagram, parallax and stellar radii
Hooke's law
The force a spring exerts is proportional to its extension and opposite to it, FH=−kxF_\text{H} = -kx, as long as the limit of proportionality is not passed.Taught in 1.5 Contact and field forces

I

ideal gas
A model gas of point molecules in random motion that exert no forces on each other except during elastic collisions, so it has no intermolecular potential energy and, for a fixed amount, obeys PVT=constant\frac{PV}{T} = \text{constant} exactly.Taught in 2.7 Pressure, amount of substance and the ideal gas model
ideal gas law
The equation linking the pressure, volume, amount and temperature of an ideal gas: PV=nRTPV = nRT, or PV=NkBTPV = Nk_\text{B}T when counting molecules. The temperature must be in kelvin.Taught in 2.8 The ideal gas equations and the kinetic model
impulse
The average resultant force on a body multiplied by the time it acts, J=FΔtJ = F\Delta t; it equals the body's change in momentum and the area under its force-time graph, measured in N s.Taught in 1.6 Momentum and impulse
induced emf
An emf produced in a conductor when the magnetic flux linked with it changes; Faraday's law gives its size and Lenz's law its direction.Taught in 4.9 Magnetic flux, Faraday's law and Lenz's law
inelastic collision
A collision in which the total kinetic energy decreases, because some is transferred to other forms such as internal energy and sound; momentum is still conserved if no resultant external force acts.Taught in 1.7 Collisions and explosions
inertial reference frame
A reference frame that is not accelerating, so Newton's first law holds in it; any frame moving at constant velocity relative to it is also inertial.Taught in 1.15 Reference frames and Galilean relativity
infrared radiation
Electromagnetic radiation with wavelengths just longer than visible red light, from about 700 nm to about 1 mm; warm objects such as Earth's surface emit mostly infrared.Taught in 2.6 Greenhouse gases and the greenhouse effect
insulator
A material whose electrons are bound to their atoms or molecules, so it has very few mobile charge carriers and the current in it is negligible.Taught in 2.13 Resistance, resistivity and Ohm's law
intensity
The power carried by radiation or a wave per unit area, through a surface at right angles to the direction of travel, in W m−2\text{W m}^{-2}; for a wave it is proportional to the amplitude squared.Taught in 2.4 Thermal radiation and black bodies
internal energy
The total random kinetic energy of the particles of a system plus the total intermolecular potential energy from the forces between them; it is a total, unlike temperature, which measures the average kinetic energy per particle.Taught in 2.2 Internal energy, phase changes and specific heats
internal resistance
The resistance of the materials inside a cell; the current in the cell dissipates energy in it, so the terminal potential difference is V=ε−IrV = \varepsilon - Ir.Taught in 2.14 Electrical power and circuits
inverse proportionality
A relationship y=kxy = \frac{k}{x} with kk constant: doubling xx halves yy, so the product xyxy stays the same.Taught in 6.4 Graphs and data analysis
inverse square law
A rule in which a quantity is proportional to 1d2\frac{1}{d^{2}}, the inverse of the square of the distance from a point source, so doubling the distance divides it by four.Taught in 2.4 Thermal radiation and black bodies
ionisation
The removal of electrons from atoms or molecules to form ions; alpha particles cause the most ionisation per unit length of path and gamma rays the least.Taught in 5.7 Radioactive decay
irreversible process
A process after which the system and its surroundings cannot both be returned to their initial states; every real process is irreversible and increases the total entropy.Taught in 2.10 Entropy and the second law
isobaric process
A change of state of a gas at constant pressure, in which the work done by the gas is W=PΔVW = P\Delta V.Taught in 2.11 Gas processes and heat engines
isolated system
In mechanics, a system on which no resultant external force acts, so its total momentum is constant; in thermal physics, a system that exchanges neither energy nor matter with its surroundings.Taught in 1.6 Momentum and impulse
isothermal process
A change of state of a gas at constant temperature; for an ideal gas the internal energy does not change, so the heat supplied equals the work done by the gas (Q=WQ = W).Taught in 2.11 Gas processes and heat engines
isotope
One of two or more nuclides of the same element: they have the same proton number ZZ but different numbers of neutrons, so different nucleon numbers AA.Taught in 5.6 Binding energy and mass defect
isovolumetric process
A change of state of a gas at constant volume, so the gas does no work and all the heat supplied changes its internal energy (Q=ΔUQ = \Delta U).Taught in 2.11 Gas processes and heat engines

K

kelvin scale
The absolute temperature scale, with zero at absolute zero and steps the same size as degrees Celsius, so TT in K is the Celsius temperature plus 273; use it in every equation that multiplies or divides by temperature.Taught in 2.1 Particles, density and temperature
Kepler's first law
Every planet moves in an elliptical orbit with the Sun at one focus of the ellipse.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
Kepler's second law
The line joining the Sun and a planet sweeps out equal areas in equal times, so the planet moves fastest when it is closest to the Sun.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
Kepler's third law
For bodies orbiting the same central mass, the square of the orbital period is proportional to the cube of the mean orbital radius: T2∝r3T^{2} \propto r^{3}.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
kinetic energy
The energy a body has because it is moving, Ek=12mv2=p22mE_\text{k} = \tfrac{1}{2}mv^{2} = \frac{p^{2}}{2m}; a scalar that is never negative, measured in joules.Taught in 1.10 Mechanical energy

L

length contraction
The shortening of an object's length along its direction of motion for an observer who sees it move, L=L0γL = \frac{L_0}{\gamma}; lengths at right angles to the motion do not change.Taught in 1.17 Time dilation, length contraction and simultaneity
Lenz's law
An induced emf acts in the direction that makes its current oppose the change in flux causing it, a consequence of conservation of energy.Taught in 4.9 Magnetic flux, Faraday's law and Lenz's law
light-dependent resistor
A resistor (LDR) whose resistance decreases as the intensity of the light falling on it increases.Taught in 2.14 Electrical power and circuits
line of best fit
A single straight line or smooth curve drawn through the trend of plotted data, with the points scattered as evenly as possible on both sides.Taught in 6.4 Graphs and data analysis
linear momentum
The product of a body's mass and its velocity, p=mvp = mv: a vector in the direction of the velocity, measured in kg m s⁻¹.Taught in 1.6 Momentum and impulse
linearisation
Choosing what to plot on each axis, from a theoretical equation, so that the predicted relationship gives a straight-line graph of the form y=mx+cy = mx + c.Taught in 6.4 Graphs and data analysis
logarithmic scale
An axis on which equal distances stand for equal factors, usually powers of ten, so values spanning many orders of magnitude fit on one graph.Taught in 6.4 Graphs and data analysis
longitudinal wave
A wave in which the oscillations are parallel to the direction of energy transfer, forming compressions and rarefactions, such as sound.Taught in 3.3 Travelling waves
Lorentz factor
γ=1/1−v2/c2\gamma = 1/\sqrt{1 - v^{2}/c^{2}} for two inertial frames with relative speed vv; it is never less than 1, equals 1 only when v=0v = 0, and grows without limit as vv approaches cc.Taught in 1.16 The postulates of special relativity and Lorentz transformations
Lorentz transformation
The equations x′=γ(x−vt)x' = \gamma(x - vt) and t′=γ(t−vx/c2)t' = \gamma(t - vx/c^{2}) that convert an event's position and time from one inertial frame to another moving at velocity vv relative to it; they reduce to the Galilean equations when vv is much less than cc.Taught in 1.16 The postulates of special relativity and Lorentz transformations
luminosity
The total power radiated by a body, such as a star, measured in watts or as a multiple of the Sun's luminosity.Taught in 2.4 Thermal radiation and black bodies

M

magnetic field
A region in which a magnet, a magnetic material, or a moving charge or current experiences a force.Taught in 4.5 Electric and magnetic field lines
magnetic field line
A line showing the direction of the force on a north pole at each point; outside a magnet the lines run from north to south, and they always form closed loops.Taught in 4.5 Electric and magnetic field lines
magnetic field strength
The force per unit current per unit length on a straight wire at right angles to a magnetic field, B=FILB = \frac{F}{IL}; a vector quantity measured in tesla, where 1 T=1 N A−1 m−11\ \text{T} = 1\ \text{N A}^{-1}\,\text{m}^{-1}.Taught in 4.8 Magnetic forces on charges and currents
magnetic flux
How much magnetic field passes through an area, Φ=BAcos⁡θ\Phi = BA\cos\theta with θ\theta measured between the field and the normal to the area, in webers (1 Wb=1 T m2\pu{1 Wb} = \pu{1 T m2}).Taught in 4.9 Magnetic flux, Faraday's law and Lenz's law
magnetic force
The force a magnetic field exerts on a moving charge or a current-carrying wire, perpendicular to both the velocity (or current) and the field.Taught in 1.5 Contact and field forces
main sequence
The long, stable stage of a star's life in which it fuses hydrogen into helium in its core, with the outward force from radiation and gas pressure balancing the inward gravitational force.Taught in 5.12 Fusion and the life of stars
mass defect
The total mass of the separate protons and neutrons that make up a nucleus minus the mass of the nucleus itself, Δm\Delta m; the nucleus always has the smaller mass.Taught in 5.6 Binding energy and mass defect
mass-energy equivalence
The principle that mass and energy are equivalent, E=mc2E = mc^{2}: when a system's energy changes by ΔE\Delta E, its mass changes by ΔE/c2\Delta E / c^{2}, so a nuclear reaction that releases energy ends with less mass.Taught in 5.6 Binding energy and mass defect
mass-spring system
A mass attached to a light spring that obeys Hooke's law; it oscillates in simple harmonic motion with T=2πm/kT = 2\pi\sqrt{m/k}, whatever the amplitude.Taught in 3.1 Simple harmonic motion
maximum kinetic energy of photoelectrons
The kinetic energy of the fastest electrons emitted in the photoelectric effect, Emax=hf−ΦE_\text{max} = hf - \Phi. It depends on the frequency of the radiation and the metal, not on the intensity.Taught in 5.4 The photoelectric effect
mechanical energy
The sum of a system's kinetic, gravitational potential and elastic potential energy; it stays constant when only weight and spring forces do work, with no friction, air resistance or driving force.Taught in 1.10 Mechanical energy
microstate
One particular arrangement of the particles of a system among all the arrangements that give the same macroscopic state; in an isolated system all microstates are equally likely, and Ω\Omega is the number of them.Taught in 2.10 Entropy and the second law
Millikan's experiment
An experiment in which charged oil drops were held still between horizontal charged plates, so that the electric force balanced their weight; every charge measured was a whole-number multiple of ee, which is evidence that charge is quantised.Taught in 4.4 Electric charge and Coulomb's law
moderator
A material of light nuclei, such as water or graphite, that slows fast fission neutrons through collisions, so they are more likely to be absorbed by uranium-235 and cause fission.Taught in 5.11 Fission and nuclear power
molar gas constant
The constant RR in PV=nRTPV = nRT, the same for every ideal gas: R=8.31 J mol−1 K−1R = \pu{8.31 J mol-1 K-1}. It equals the Avogadro constant multiplied by the Boltzmann constant, R=NAkBR = N_\text{A}k_\text{B}.Taught in 2.8 The ideal gas equations and the kinetic model
mole
The SI unit of amount of substance (mol): one mole of a substance contains NA=6.02×1023N_\text{A} = 6.02 \times 10^{23} particles.Taught in 2.7 Pressure, amount of substance and the ideal gas model
moment of inertia
A body's resistance to a change in its rotation about a given axis, I=∑mr2I = \sum mr^{2} with rr the perpendicular distance of each mass from the axis, so it depends on how the mass is spread about that axis; unit kg m².Taught in 1.13 Rotational motion and moment of inertia
motional emf
The emf ε=BvL\varepsilon = BvL induced between the ends of a straight conductor of length LL moving at speed vv in a uniform magnetic field BB, when the conductor, its velocity and the field are all at right angles to each other.Taught in 4.9 Magnetic flux, Faraday's law and Lenz's law
muon decay experiment
An experiment that counts fast cosmic-ray muons at high altitude and at sea level; far more survive than their mean lifetime at rest allows classically, which is evidence for time dilation and length contraction.Taught in 1.18 Space–time diagrams and muon decay

N

natural frequency
The frequency at which a system oscillates when it is displaced and then left to oscillate freely, with no driving force.Taught in 3.8 Resonance and damping
neutrino
An uncharged particle with a very small mass, emitted with a positron in beta-plus decay; it interacts with matter so rarely that it is very hard to detect.Taught in 5.7 Radioactive decay
neutron-to-proton ratio
The number of neutrons in a nucleus divided by the number of protons, N/ZN/Z; stable nuclides have a ratio of about 1 when light, rising to about 1.5 for the heaviest.Taught in 5.9 Nuclear stability and the neutrino
Newton's first law
A body stays at rest, or keeps moving at constant velocity, unless a resultant force acts on it.Taught in 1.4 Newton's laws and free-body diagrams
Newton's law of gravitation
Two point masses attract each other with a force F=Gm1m2r2F = G\frac{m_1 m_2}{r^{2}} along the line joining them, where rr is the distance between their centres.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
Newton's second law
The resultant force on a body equals its rate of change of momentum; for a body of constant mass this becomes F=maF = ma.Taught in 1.4 Newton's laws and free-body diagrams
Newton's third law
If body A exerts a force on body B, then B exerts a force on A that is equal in size, opposite in direction and of the same type; the two forces act on different bodies.Taught in 1.4 Newton's laws and free-body diagrams
node
A point on a standing wave where the amplitude is always zero, so the medium there never moves.Taught in 3.7 Standing waves
non-ohmic conductor
A component that does not obey Ohm's law, so its I–V graph is not a straight line through the origin, such as a filament lamp or a light-emitting diode.Taught in 2.13 Resistance, resistivity and Ohm's law
non-uniform acceleration
Acceleration that changes with time, shown by a curved velocity–time graph; the equations of motion do not apply while it changes, so use gradients and areas of graphs instead.Taught in 1.2 Equations of motion and motion graphs
normal force
The component of the contact force from a surface that acts perpendicular to the surface, pushing on the body; it equals the weight only in special cases, such as a body at rest on level ground with no other vertical forces.Taught in 1.5 Contact and field forces
nuclear energy level
One of the discrete energies a nucleus can have, a ground state or an excited state; it is why alpha particles and gamma photons from one nuclide have only certain energies.Taught in 5.9 Nuclear stability and the neutrino
nuclear radius
The radius of a nucleus, R=R0A13R = R_0A^{\frac{1}{3}} with R0=1.20×10−15 mR_0 = 1.20 \times 10^{-15}\ \text{m} and AA the nucleon number, so a nucleus's volume is proportional to AA and every nucleus has about the same density.Taught in 5.3 Nuclear radius and the Bohr model
nucleon
A particle found in a nucleus: a proton or a neutron.Taught in 5.1 The nuclear atom
nucleon number
The total number of protons and neutrons in a nucleus, symbol AA, written at the top left of the chemical symbol.Taught in 5.1 The nuclear atom
nucleus
The tiny, dense, positively charged centre of an atom, made of protons and neutrons, which holds almost all of the atom's mass.Taught in 5.1 The nuclear atom

O

Ohm's law
The current in a metal conductor is directly proportional to the potential difference across it, provided its temperature stays constant; it is not the definition of resistance.Taught in 2.13 Resistance, resistivity and Ohm's law
orbital speed
The speed of a body in a circular orbit around a much larger mass, where gravity provides the centripetal force: vorbital=GMrv_\text{orbital} = \sqrt{\frac{GM}{r}}, with rr measured from the centre. Lower orbits are faster.Taught in 4.3 Orbits and escape speed
order of magnitude
The power of ten nearest to a value, used to compare sizes and to quote rough estimates.Taught in 6.1 Units, measurement and estimation

P

P-V diagram
A graph of the pressure of a gas against its volume, on which each point is a state; the area under a line is the work done by the gas, and the area enclosed by a cycle is the net work.Taught in 2.11 Gas processes and heat engines
parsec
The distance at which 1 AU subtends an angle of 1 arc-second, so a star with parallax angle pp in arc-seconds is d=1pd = \frac{1}{p} parsecs away; 1 pc is 3.26 light years.Taught in 5.13 The HR diagram, parallax and stellar radii
path difference
The difference between the distances two waves travel from their sources to the same point.Taught in 3.5 Superposition and double-slit interference
percentage change
The change in a quantity divided by its original value and multiplied by 100%; positive for a rise and negative for a fall.Taught in 6.3 Uncertainties and errors
percentage difference
The difference between two values divided by their mean and multiplied by 100%, used to compare two results when neither is an accepted value.Taught in 6.3 Uncertainties and errors
percentage error
The size of the difference between an experimental value and the accepted value, divided by the size of the accepted value (ignore any minus sign) and multiplied by 100%.Taught in 6.3 Uncertainties and errors
percentage uncertainty
The fractional uncertainty multiplied by 100%, which shows how large the uncertainty is compared with the value.Taught in 6.3 Uncertainties and errors
period
The time taken for one complete cycle of a repeating motion, such as one full revolution of a circle; T=1fT = \frac{1}{f}, measured in seconds.Taught in 1.8 Circular motion
phase angle
The constant ϕ\phi in x=x0sin⁡(ωt+ϕ)x = x_0\sin(\omega t + \phi), in radians, that fixes where an oscillator is in its cycle, and which way it is moving, at t=0t = 0.Taught in 3.2 Phase and the equations of simple harmonic motion
phase change
A change of state, such as melting, freezing, boiling or condensing, that happens at constant temperature for a pure substance; the energy transferred changes the intermolecular potential energy of the particles, not their average random kinetic energy.Taught in 2.2 Internal energy, phase changes and specific heats
phase difference
How far one oscillation is ahead of another, as a fraction of a cycle written as an angle: one cycle is 2π2\pi rad or 360∘360^\circ.Taught in 3.5 Superposition and double-slit interference
photoelectric effect
The emission of electrons from a metal surface when electromagnetic radiation above the metal's threshold frequency falls on it. It is evidence that light behaves as particles (photons).Taught in 5.4 The photoelectric effect
photon
A single packet, or quantum, of electromagnetic radiation. A photon of frequency ff carries energy E=hfE = hf.Taught in 5.2 Atomic spectra and energy levels
Planck constant
The constant hh that links a photon's energy to its frequency in E=hfE = hf; h=6.63⋅10−34 J sh = \pu{6.63e-34 J s}, given in the data booklet.Taught in 5.2 Atomic spectra and energy levels
point mass
A body modelled as all its mass at a single point; a uniform sphere acts as one at its centre for points on or outside its surface, and so does any body far away compared with its size.Taught in 4.1 Gravitation: Kepler's laws and Newton's law
position
Where a body is, given as a distance and a direction from a chosen origin; a vector, measured in metres.Taught in 1.1 Describing motion
postulates of special relativity
The two starting assumptions of special relativity: the laws of physics are the same in every inertial reference frame, and every inertial observer measures the speed of light in a vacuum as cc, whatever the motion of the source.Taught in 1.16 The postulates of special relativity and Lorentz transformations
potential difference
The work done per unit charge on a positive charge as it moves from one point in a circuit to another, following the current, V=WqV = \frac{W}{q}, measured in volts, where 1 V=1 J C−11\ \text{V} = 1\ \text{J C}^{-1}.Taught in 2.12 Current, potential difference and emf
potential gradient
The rate of change of potential with distance, ΔVΔr\frac{\Delta V}{\Delta r}; the gravitational field strength is minus the gravitational potential gradient.Taught in 4.2 Gravitational potential and potential energy
power
The rate at which work is done or energy is transferred, P=ΔWΔtP = \frac{\Delta W}{\Delta t}, which for a force FF moving a body at velocity vv along its line is P=FvP = Fv; its unit is the watt, where 1 W=1 J s−11\ \text{W} = 1\ \text{J s}^{-1}.Taught in 1.11 Power, efficiency and energy density
precision
How close repeated measurements of the same quantity are to each other; random errors reduce it.Taught in 6.3 Uncertainties and errors
pressure
The force acting perpendicular to a surface divided by the area it acts on, P=FAP = \frac{F}{A}, measured in pascals (1 Pa=1 N m−2\pu{1 Pa} = \pu{1 N m-2}).Taught in 2.7 Pressure, amount of substance and the ideal gas model
projectile
A body that moves freely after it has been launched, with no engine or push, so the only forces on it are its weight and any fluid resistance.Taught in 1.3 Projectile motion
propagation of uncertainty
Working out the uncertainty in a calculated result from the uncertainties in the measurements used to calculate it.Taught in 6.3 Uncertainties and errors
proper length
The length of an object measured in the inertial frame in which the object is at rest; it is the longest length any inertial observer measures.Taught in 1.17 Time dilation, length contraction and simultaneity
proper time interval
The time between two events measured in the inertial frame in which both happen at the same place, so one clock times them both; it is the shortest interval any inertial observer measures.Taught in 1.17 Time dilation, length contraction and simultaneity
proton number
The number of protons in a nucleus, symbol ZZ, written at the bottom left of the chemical symbol; it decides which element the atom is.Taught in 5.1 The nuclear atom

Q

quantisation of charge
The fact that the charge on any free particle or body is a whole-number multiple of the elementary charge, q=neq = ne, so charge changes only in steps of ee.Taught in 4.4 Electric charge and Coulomb's law

R

radian
The angle at the centre of a circle when the arc it cuts off equals the radius, so θ=sr\theta = \frac{s}{r} and 2π2\pi rad =360∘= 360^{\circ}.Taught in 6.2 Scalars and vectors
radioactive decay
The random and spontaneous change of an unstable nucleus into a more stable form, with the emission of alpha, beta or gamma radiation; its rate is not affected by temperature, pressure or chemical state.Taught in 5.7 Radioactive decay
radioactive decay law
The rule that the number of undecayed nuclei falls exponentially with time, N=N0e−λtN = N_0\mathrm{e}^{-\lambda t}, so the activity A=λNA = \lambda N falls in the same way.Taught in 5.10 The radioactive decay law
random error
An error that makes repeated readings scatter unpredictably above and below the true value; its effect is reduced by repeating readings and taking the mean.Taught in 6.3 Uncertainties and errors
ray
A line showing the direction a wave travels and transfers energy, always perpendicular to the wavefronts.Taught in 3.4 Reflection, refraction and Snell's law
red giant
A large, luminous star with a cool, red surface that has used up the hydrogen in its core and now fuses hydrogen in a shell around the core, or helium in the core.Taught in 5.12 Fusion and the life of stars
redshift
An increase in the observed wavelength (and decrease in frequency) of light from a source moving away from the observer; for speeds much less than cc, Δλλ≈vc\frac{\Delta\lambda}{\lambda} \approx \frac{v}{c}.Taught in 3.9 The Doppler effect
reference frame
A set of coordinate axes with an origin, together with clocks, that an observer uses to give the position and time of events.Taught in 1.15 Reference frames and Galilean relativity
reflection
The return of a wave into its own medium at a boundary, with the angle of reflection equal to the angle of incidence, both measured from the normal.Taught in 3.4 Reflection, refraction and Snell's law
refraction
The change in direction of a wave crossing into a new medium at an angle to the normal, caused by its change of speed; the frequency stays the same while the wavelength changes.Taught in 3.4 Reflection, refraction and Snell's law
refractive index
The speed of light in a vacuum divided by its speed in a medium, n=cvn = \frac{c}{v}; it has no unit.Taught in 3.4 Reflection, refraction and Snell's law
relativistic velocity addition
The rule u′=(u−v)/(1−uv/c2)u' = (u - v)/(1 - uv/c^{2}) for an object's velocity u′u' in a frame moving at vv, when the object has velocity uu in the original frame; for speeds below cc it never gives a result of cc or more.Taught in 1.16 The postulates of special relativity and Lorentz transformations
resistance
The potential difference across a component divided by the current in it, R=VIR = \frac{V}{I}, measured in ohms (Ω\Omega); it depends on the component's material, shape and temperature.Taught in 2.13 Resistance, resistivity and Ohm's law
resistivity
A property of a material, ρ=RAL\rho = \frac{RA}{L}, measured in Ω m\Omega\ \text{m}, that sets how strongly it resists current whatever the length or thickness of the sample.Taught in 2.13 Resistance, resistivity and Ohm's law
resolving a vector
Replacing a vector by two perpendicular components that add up to it; at angle θ\theta to the xx-direction they are Fcos⁡θF\cos\theta and Fsin⁡θF\sin\theta.Taught in 6.2 Scalars and vectors
resonance
The large amplitude of a forced oscillation when the driving frequency equals, or is very close to, the natural frequency of the system.Taught in 3.8 Resonance and damping
resultant force
The vector sum of all the forces acting on a body: the single force with the same effect as all of them together, also called the net force.Taught in 1.4 Newton's laws and free-body diagrams
right-hand rule
A way to find the direction of the magnetic force: with the right hand flat, fingers along the field and thumb along the velocity of a positive charge or the current, the force comes out of the palm; for a negative charge the force is reversed.Taught in 4.8 Magnetic forces on charges and currents
root mean square speed
The square root of the mean of the squares of the speeds of the molecules in a gas, vrms=v2‾v_\text{rms} = \sqrt{\overline{v^{2}}}. Its square is the v2v^{2} in P=13ρv2P = \frac{1}{3}\rho v^{2}.Taught in 2.8 The ideal gas equations and the kinetic model
rotational equilibrium
The state of a body when the resultant torque on it is zero, so it has no angular acceleration: it stays at rest or keeps rotating at a steady rate.Taught in 1.12 Torque and rotational equilibrium
rotational kinetic energy
The kinetic energy a body has because it is spinning, Ek=12Iω2=L22IE_\text{k} = \frac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}; a rolling body has this as well as its translational kinetic energy.Taught in 1.14 Angular momentum and rotational kinetic energy

S

Sankey diagram
A flow diagram of an energy transfer in which each arrow's width is proportional to the energy or power it carries, with the useful output carrying straight on and wasted energy branching off.Taught in 1.9 Work and energy transfer
scalar
A quantity that has magnitude only, with no direction, such as mass, distance, speed, energy or temperature.Taught in 6.2 Scalars and vectors
scientific notation
A way of writing a number as a×10na \times 10^{n}, where 1≤a<101 \le a < 10 and nn is an integer, as in 3.5×1063.5 \times 10^{6}.Taught in 6.1 Units, measurement and estimation
second law of thermodynamics
The total entropy of an isolated system never decreases; equivalently, thermal energy cannot flow by itself from a colder to a hotter body (Clausius), and no cyclic engine can turn all the thermal energy from one reservoir into work (Kelvin).Taught in 2.10 Entropy and the second law
shielding
Thick layers of steel and concrete around a reactor that absorb the neutrons and gamma radiation escaping from the core.Taught in 5.11 Fission and nuclear power
SI prefix
A word or symbol in front of a unit that multiplies it by a power of ten, such as kilo (k, 10310^{3}) or micro (µ, 10−610^{-6}).Taught in 6.1 Units, measurement and estimation
SI unit
A unit of the International System of Units, built from the seven fundamental units: the kilogram, metre, second, ampere, kelvin, mole and candela.Taught in 6.1 Units, measurement and estimation
significant figures
The digits of a number that carry meaning about its precision, counted from the first non-zero digit.Taught in 6.3 Uncertainties and errors
simple harmonic motion
Oscillation in which the acceleration is proportional to the displacement from a fixed equilibrium position and always directed towards that position, a=−ω2xa = -\omega^{2}x.Taught in 3.1 Simple harmonic motion
simple pendulum
A small, dense bob on a light, inextensible string swinging from a fixed point; for small angles it performs simple harmonic motion with T=2πl/gT = 2\pi\sqrt{l/g}.Taught in 3.1 Simple harmonic motion
simultaneity
Two events happening at the same time in a given frame; events at different places that are simultaneous in one inertial frame need not be simultaneous in another.Taught in 1.17 Time dilation, length contraction and simultaneity
single-slit diffraction
The pattern from monochromatic light through one narrow slit of width bb: a bright central maximum, twice as wide as the much dimmer maxima beside it, with the first minimum at an angle θ=λb\theta = \frac{\lambda}{b} in radians.Taught in 3.6 Single-slit diffraction and diffraction gratings
Snell's law
The rule for refraction at a boundary, n1sin⁡θ1=n2sin⁡θ2n_1 \sin\theta_1 = n_2 \sin\theta_2, with each angle measured between the ray and the normal.Taught in 3.4 Reflection, refraction and Snell's law
solar constant
The intensity of the Sun's radiation at the top of Earth's atmosphere, on a surface at right angles to the rays, at the mean Earth–Sun distance; the data booklet gives S=1.36×103 W m−2S = 1.36 \times 10^{3}\ \text{W m}^{-2}.Taught in 2.5 Emissivity, albedo and Earth's energy balance
space-time diagram
A graph for one inertial reference frame with position xx on the horizontal axis and ctct on the vertical axis, drawn to the same scale, on which every point is an event.Taught in 1.18 Space–time diagrams and muon decay
space-time interval
The quantity Δs\Delta s between two events, given by (Δs)2=(cΔt)2−(Δx)2(\Delta s)^{2} = (c\Delta t)^{2} - (\Delta x)^{2}; it has the same value in every inertial frame, even though Δt\Delta t and Δx\Delta x do not.Taught in 1.16 The postulates of special relativity and Lorentz transformations
specific heat capacity
The energy needed to raise the temperature of 1 kg of a substance by 1 K, in J kg−1 K−1\text{J kg}^{-1}\,\text{K}^{-1}, so that Q=mcΔTQ = mc\Delta T.Taught in 2.2 Internal energy, phase changes and specific heats
specific latent heat
The energy needed to change the phase of 1 kg of a substance at constant temperature, in J kg−1\text{J kg}^{-1}, so that Q=mLQ = mL; fusion (melting) and vaporization (boiling) have different values.Taught in 2.2 Internal energy, phase changes and specific heats
spectral line
One particular wavelength emitted or absorbed by atoms, seen as a bright line in an emission spectrum or a dark line in an absorption spectrum. Each line comes from a transition between two energy levels.Taught in 5.2 Atomic spectra and energy levels
speed
The rate at which a body covers distance, a scalar in m s−1\text{m s}^{-1}; instantaneous speed is the size of the instantaneous velocity.Taught in 1.1 Describing motion
speed of light
The speed of every electromagnetic wave in a vacuum, c=3.00×108 m s−1c = 3.00 \times 10^{8}\ \text{m s}^{-1}; it is the same for all inertial observers.Taught in 3.3 Travelling waves
spring constant
The force per unit extension of a spring, kk, in N m−1\text{N m}^{-1}; a stiffer spring has a larger spring constant.Taught in 1.5 Contact and field forces
standing wave
A wave pattern made when two waves with the same frequency, wavelength, amplitude and speed travel in opposite directions and superpose; the pattern stays in place and transfers no net energy.Taught in 3.7 Standing waves
Stefan-Boltzmann law
The total power radiated by a black body is L=σAT4L = \sigma A T^{4}, so it depends on its surface area and on the fourth power of its absolute temperature; a real surface radiates less.Taught in 2.4 Thermal radiation and black bodies
stellar parallax
The apparent shift of a nearby star against much more distant stars as the Earth orbits the Sun; the parallax angle, half the shift seen six months apart, gives the star's distance.Taught in 5.13 The HR diagram, parallax and stellar radii
strong nuclear force
The attractive force between nucleons that holds a nucleus together; it acts only over distances of about 10−15 m10^{-15}\ \text{m}, where it is stronger than the electric repulsion between protons.Taught in 5.6 Binding energy and mass defect
supergiant
A massive star late in its life, with a luminosity of roughly 10410^{4} to 10610^{6} times the Sun's and a radius up to about a thousand times the Sun's; supergiants lie across the top of the HR diagram.Taught in 5.13 The HR diagram, parallax and stellar radii
superposition
When waves or pulses overlap, the resultant displacement at each point is the sum of the displacements each would cause on its own.Taught in 3.5 Superposition and double-slit interference
systematic error
An error that shifts every reading in the same direction, such as a zero error or an uncalibrated instrument; repeating readings does not reduce it.Taught in 6.3 Uncertainties and errors

T

temperature
A measure of the average random kinetic energy of the particles of a substance; net thermal energy flows from higher to lower temperature.Taught in 2.1 Particles, density and temperature
tension
The pulling force a taut string, rope or cable exerts on a body attached to it, acting along the string away from the body.Taught in 1.5 Contact and field forces
terminal potential difference
The potential difference across a cell's terminals while it delivers a current; it is less than the emf by IrIr, and equals the emf only when no current flows.Taught in 2.14 Electrical power and circuits
terminal speed
The constant speed of a body falling through a fluid once the fluid resistance plus any upthrust balances its weight, so the resultant force and the acceleration are zero (the body is still moving).Taught in 1.3 Projectile motion
test charge
An imagined small positive charge placed at a point to measure the field there, small enough not to disturb the charges that make the field.Taught in 4.5 Electric and magnetic field lines
thermal conductivity
The property kk of a material, in W m−1 K−1\text{W m}^{-1}\,\text{K}^{-1}, that sets how fast it conducts thermal energy for a given area and temperature gradient, as in ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}; metals have high values and insulators low ones.Taught in 2.3 Conduction and convection
thermal energy transfer
Energy transferred from a body at a higher temperature to one at a lower temperature because of their temperature difference, often called heat; it is energy in transit, not something a body stores.Taught in 2.2 Internal energy, phase changes and specific heats
thermal equilibrium
The state of bodies in thermal contact that are at the same temperature, so there is no resultant thermal energy transfer between them.Taught in 2.2 Internal energy, phase changes and specific heats
thermal radiation
Energy transferred as electromagnetic waves, mostly infrared at everyday temperatures, which every object above absolute zero emits; it needs no medium, so it can cross a vacuum.Taught in 2.3 Conduction and convection
thermistor
A resistor whose resistance changes a lot with temperature; in an NTC thermistor the resistance decreases as the temperature increases.Taught in 2.14 Electrical power and circuits
threshold frequency
The minimum frequency of electromagnetic radiation that can release photoelectrons from a given metal, f0=Φhf_0 = \frac{\Phi}{h}. Below it no electrons are emitted, however intense the radiation.Taught in 5.4 The photoelectric effect
time dilation
The lengthening of the time between two events for an observer who sees them happen at different places, Δt=γΔt0\Delta t = \gamma\Delta t_0, so a clock moving relative to you is measured to run slow.Taught in 1.17 Time dilation, length contraction and simultaneity
torque
The turning effect of a force about an axis, τ=Frsin⁡θ\tau = Fr\sin\theta: the force times the perpendicular distance from the axis to its line of action, measured in N m and turning clockwise or anticlockwise.Taught in 1.12 Torque and rotational equilibrium
total internal reflection
Reflection of all of a wave back into its medium, which happens when it heads towards a smaller refractive index at an angle of incidence greater than the critical angle.Taught in 3.4 Reflection, refraction and Snell's law
transverse wave
A wave in which the oscillations are perpendicular to the direction of energy transfer, such as a wave on a rope or any electromagnetic wave.Taught in 3.3 Travelling waves

U

uncertainty
The range above and below a measured value within which the true value is expected to lie, written as value ± uncertainty.Taught in 6.3 Uncertainties and errors
uncertainty bar
A line through a plotted point reaching one absolute uncertainty either side of it, showing the range in which the true value could lie.Taught in 6.4 Graphs and data analysis
uniform acceleration
Acceleration that stays constant in magnitude and direction; the equations of motion apply only when the acceleration is uniform.Taught in 1.2 Equations of motion and motion graphs
uniform electric field
An electric field with the same strength and direction at every point, drawn as parallel, equally spaced lines; between parallel plates its strength is E=VdE = \frac{V}{d}.Taught in 4.5 Electric and magnetic field lines

V

vector
A quantity that has both magnitude and direction, such as displacement, velocity, acceleration or force; it is drawn as an arrow whose length shows its size.Taught in 6.2 Scalars and vectors
vector addition
Combining vectors by drawing them head to tail, so the resultant runs from the tail of the first to the head of the last; to subtract a vector, add its negative.Taught in 6.2 Scalars and vectors
velocity
The rate of change of a body's position, a vector in m s−1\text{m s}^{-1} that gives both how fast it moves and which way.Taught in 1.1 Describing motion
velocity selector
An arrangement of uniform electric and magnetic fields at right angles to each other and to a beam of charged particles. The electric and magnetic forces balance for one speed only, v=EBv = \frac{E}{B}, so only particles at that speed pass straight through, whatever their charge or mass.Taught in 4.7 Charged particles in electric and magnetic fields
viscous drag
The resistive force on a small sphere moving slowly through a fluid, opposite to its velocity, given by Fd=6πηrvF_\text{d} = 6\pi\eta r v.Taught in 1.5 Contact and field forces

W

wave
A disturbance that transfers energy from place to place by oscillations, with no net transfer of matter.Taught in 3.3 Travelling waves
wave-particle duality
The finding that both light and matter show wave behaviour, such as diffraction, in some experiments and particle behaviour, such as the photoelectric effect or Compton scattering, in others.Taught in 5.5 Matter waves and Compton scattering
wavefront
A line or surface joining neighbouring points of a wave that are in phase, such as one crest; neighbouring wavefronts are usually drawn one wavelength apart.Taught in 3.4 Reflection, refraction and Snell's law
wavelength
The distance between two neighbouring points on a wave that are in phase, such as one crest and the next; symbol λ\lambda, unit m.Taught in 3.3 Travelling waves
weight
The gravitational force on a body, Fg=mgF_\text{g} = mg, measured in newtons; unlike mass, it depends on the gravitational field strength where the body is.Taught in 1.5 Contact and field forces
white dwarf
The small, very dense, hot core left when a star of up to about 8 solar masses sheds its outer layers; no fusion happens in it, so it slowly cools.Taught in 5.12 Fusion and the life of stars
Wien's displacement law
The peak wavelength of a black body's spectrum is inversely proportional to its absolute temperature, λmaxT=2.9×10−3 m K\lambda_\text{max} T = 2.9 \times 10^{-3}\ \text{m K}, so hotter bodies peak at shorter wavelengths.Taught in 2.4 Thermal radiation and black bodies
work
The energy transferred by a force when its point of application moves; for a constant force W=Fscos⁡θW = Fs\cos\theta, where θ\theta is the angle between the force and the displacement, so only the component of the force along the displacement does work.Taught in 1.9 Work and energy transfer
work function
The minimum energy needed to remove an electron from the surface of a metal, written Φ\Phi. It equals hf0hf_0, where f0f_0 is the threshold frequency.Taught in 5.4 The photoelectric effect
world line
The line on a space-time diagram traced by all the events in an object's history; at constant velocity it is straight and makes an angle θ\theta with the ctct axis, where tan⁡θ=v/c\tan\theta = v/c.Taught in 1.18 Space–time diagrams and muon decay