5.8 · SLPaper 1Paper 2

Activity and half-life

Builds on 5.7 Radioactive decay21 min read

In a minute

In you can't say when one nucleus will decay, but a large sample behaves predictably. Its (decays per second) halves every , whatever the starting amount. A detector measures a , which also includes , so you subtract the background before you use half-lives.

You'll be able to

  • Explain what activity, count rate and half-life mean, and read a half-life from a decay graph.
  • Work out the activity, count rate or number of nuclei left after a whole number of half-lives, and the time taken to fall to a given value.
  • Correct a count rate for background radiation, and explain why the measured count rate does not halve in one half-life.
Before you start3 quick questions on what this builds on
Check yourself
Which statement about one unstable nucleus is correct?
Check yourself
Which radiation causes the most per millimetre of air it passes through?
Check yourself
You halve a quantity, then halve the result, four times in total. What fraction of the original is left?

Revise first: 5.7 Radioactive decay

Activity, count rate and half-life

One nucleus decays at a random moment. But even a milligram of a radioactive material holds around 101810^{18} nuclei, so the randomness averages out. The number decaying each second follows a clear pattern.

More undecayed nuclei means more decays each second. So as the sample decays, its activity falls.

You can't count every decay. A detector, such as a Geiger–Müller tube, records only some of them. The number it records per second (or per minute) is the .

A small radioactive source on the left sends radiation out in all directions, shown by sixteen short arrows pointing every way. A Geiger-Muller tube on the right points at the source. Two faint lines from the source to the edges of the tube's window mark a narrow cone: only radiation inside this cone can enter the tube. The tube is wired to a counter. source Geiger–Müller tube window counter
The source emits in all directions, but only radiation heading into the window can be counted. So the count rate is much less than the activity.

If the source and detector stay in the same places, the count rate is a fixed fraction of the activity. So the count rate falls in step with the activity: when the activity halves, so does the count rate.

Half-life is the same whenever you start the clock. From 800 Bq to 400 Bq takes one half-life. So does 400 Bq to 200 Bq. It is a property of the nuclide, so it doesn't depend on the size of the sample.

Graph of activity in becquerels against time in minutes. The curve starts at 800 Bq and falls steeply, then more gently. Dashed lines show it reaches 400 Bq at 5 minutes, 200 Bq at 10 minutes and 100 Bq at 15 minutes. Each halving takes the same 5 minutes. 05101520250200400600800 t / min A / Bq halves halves halves half-life = 5 min
A nuclide with a half-life of 5 minutes. Every 5 minutes the activity halves. The curve gets close to zero but never quite reaches it.
Worked exampleA student plots the activity of a sample against time and draws a smooth curve. The curve passes through 1200 Bq\pu{1200 Bq} at t=0t = 0, 600 Bq\pu{600 Bq} at t=7.5 mint = \pu{7.5 min} and 300 Bq\pu{300 Bq} at t=15.2 mint = \pu{15.2 min}. Determine the half-life of the nuclide.

Try it first, then reveal one step at a time.

  1. Find each time the activity halves. From 12001200 to 600 Bq\pu{600 Bq} takes 7.5−0=7.5 min7.5 - 0 = \pu{7.5 min}.
Worked exampleA Geiger–Müller tube is placed 20 cm\pu{20 cm} from a small beta source. Explain why the count rate recorded is less than the activity of the source.

Try it first, then reveal one step at a time.

  1. Marking point 1: the source emits radiation in all directions, so most of it never reaches the tube.
Check yourself
In 2.0 min\pu{2.0 min}, 5.4×1065.4 \times 10^{6} nuclei in a long-lived sample decay. What is the activity of the sample, in Bq? Give 2 significant figures.
Check yourself
Sample X contains 2 g of a nuclide. Sample Y contains 4 g of the same nuclide. How does the half-life of Y compare with that of X?

Changes over whole half-lives

After one half-life, 12\tfrac{1}{2} of the nuclei are left undecayed. After two, half of that half: 14\tfrac{1}{4}. After three, 18\tfrac{1}{8}. Each half-life multiplies what is left by 12\tfrac{1}{2}.

Learn this
N=N0(12)nA=A0(12)nN = N_0\left(\tfrac{1}{2}\right)^{n} \qquad A = A_0\left(\tfrac{1}{2}\right)^{n}

nn is the number of half-lives that have passed, so n=tT12n = \frac{t}{T_{\frac{1}{2}}}. N0N_0 and A0A_0 are the values at the start. The count rate from the source (with background removed) follows the same rule.

These rules are not in the SL data booklet, so learn them. At SL, nn is always a whole number. A table of halvings works just as well as the formula.

Worked exampleA hospital prepares a gamma-emitting tracer with an activity of 4.8⋅108 Bq\pu{4.8e8 Bq}. The nuclide has a half-life of 6.0 h\pu{6.0 h}. The tracer is used 18 hours later. Calculate its activity then.

Try it first, then reveal one step at a time.

  1. Number of half-lives: n=186.0=3n = \frac{18}{6.0} = 3.
Worked exampleEngineers trace a leak in an underground pipe with a nuclide of half-life 15 h\pu{15 h}. Its activity starts at 2400 Bq\pu{2400 Bq}. Determine how long it takes for the activity to fall to 150 Bq\pu{150 Bq}.

Try it first, then reveal one step at a time.

  1. Find the fraction left: 1502400=116\frac{150}{2400} = \frac{1}{16}.

Half-life decides which nuclide suits a job. A medical tracer needs a half-life of hours: long enough for a scan, short enough to keep the patient's dose low. A thickness gauge needs years, so its count rate stays steady during production.

Radioactive dating works the other way round. If a rock had none of the stable product when it formed, and none has escaped since, the ratio of product to parent nuclei tells you how many half-lives have passed. The parent's half-life must be similar in size to the age you want to measure.

Check yourself
A mineral contained a parent nuclide and none of its stable daughter when it formed. Each decay makes one daughter nucleus, which stays in the mineral. Today there are 7 daughter nuclei for every parent nucleus. The parent's half-life is 1.3×1091.3 \times 10^{9} years. How old is the mineral, in years? Give 2 significant figures.
Check yourself
A tracer is added to water in a pipe to find where it leaks. Which half-life suits the tracer best?

Background radiation

Switch on a counter with no source nearby, and it still clicks. This is . It comes from radon gas in the air, rocks and building materials, cosmic rays, food and medical uses.

Background is random, but its average stays steady over an experiment. It doesn't come from your source, so it doesn't halve when your source does.

A counter near a source records the source's count rate plus the background. To find the source's part, measure the background with the source removed. Then subtract it from every reading. The result is the corrected count rate.

Learn this
corrected count rate=measured count rate−background count rate\text{corrected count rate} = \text{measured count rate} - \text{background count rate}
Graph of count rate in counts per minute against time in minutes, from 0 to 24 minutes. The measured count rate starts at 630 and falls, then levels off at a dashed horizontal line at 30 counts per minute, labelled background. A second, lower curve, the corrected count rate, starts at 600 and falls towards zero, halving every 4 minutes. The gap between the two curves is always 30. 048121620240200400600 t / min count rate / counts min⁻¹ background = 30 measured corrected
The measured count rate levels off at the background, not at zero. Only the corrected count rate halves every half-life.
Worked exampleA counter next to a source reads 515 counts min−1\pu{515 counts min-1}. The background is 35 counts min−1\pu{35 counts min-1}. The nuclide has a half-life of 8.0 days. Calculate what the counter will read 24 days later.

Try it first, then reveal one step at a time.

  1. Remove the background: 515−35=480 counts min−1515 - 35 = \pu{480 counts min-1} from the source.

To determine a half-life in the lab, measure the background for a long time, so its random variation averages out. Then record the count rate at regular times, correct every reading and plot the corrected count rate against time. Read several halvings off the curve and average them.

Worked exampleA student finds the time for the measured count rate near a source to halve and calls this the half-life. Explain why the student's value is too long.

Try it first, then reveal one step at a time.

  1. Marking point 1: the measured count rate includes the background.
Check yourself
A counter near a source reads 330 counts min−1\pu{330 counts min-1}, and the background is 30 counts min−1\pu{30 counts min-1}. What will the counter read two half-lives later?
Check yourself
A counter near a source reads 410 counts min−1\pu{410 counts min-1}. Three half-lives later it reads 60 counts min−1\pu{60 counts min-1}. What is the background count rate, in counts per minute?

Common mistakes

  • Halving a count rate that still includes background. Subtract the background first; only the source's part decays.
  • Thinking a sample has gone after two half-lives. A quarter is still undecayed; each half-life halves what is left.
  • Saying a bigger sample has a longer half-life. A bigger sample has a bigger activity, but the half-life belongs to the nuclide.
  • Giving activity in decays per minute and calling it becquerels. One becquerel is one decay per second.
  • Treating the count rate as the activity. A detector catches only a fraction of the decays.

Exam tips

  • "Determine" a half-life from a graph: show your construction lines, read two or more halvings and give the mean with its unit.
  • "Calculate" a later count rate: write the subtraction of background, the number of half-lives and the halving as separate lines. Each one can earn a mark.
  • In Paper 1A, options often include the answer you get by halving the measured count rate, or by forgetting to add the background back. Check which quantity the question asks for.
  • "Explain" questions about count rate want the reason in steps: emitted in all directions, some absorbed, not all detected.

Key takeaways

Learn thisActivity is the number of decays per second, in becquerels (1 Bq\pu{1 Bq} = one decay per second). The count rate is the number detected per unit time; background aside, it is less than the activity.
Learn thisHalf-life is the time for the number of undecayed nuclei, or the activity, to halve. It is the same for any starting amount.
Learn thisN=N0(12)n,n=tT12N = N_0\left(\tfrac{1}{2}\right)^{n}, \quad n = \frac{t}{T_{\frac{1}{2}}}
Learn thisSubtract the background from every count rate before halving. Add it back to predict what the counter will read.

Practise this

117 past-paper questions on Radioactivity and nuclear reactions in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Radioactivity and nuclear reactions →