4.6 · AHL · HL onlyPaper 1Paper 2

Electric potential and potential energy

In a minute

Charges store energy because of where they are: is the done to bring them together from far apart. Divide by the charge and you get , a scalar that maps the whole field, gives the field strength from its slope and tells you the energy needed to move any charge.

You'll be able to

  • Explain electric potential energy as the work done to assemble a system from infinite separation, and calculate it with Ep=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}, sign included.
  • Define electric potential, zero at infinity, calculate it with Ve=kQrV_\text{e} = \frac{kQ}{r}, and add the potentials of several charges as scalars.
  • Find the from the , E=−ΔVeΔrE = -\frac{\Delta V_\text{e}}{\Delta r}, including inside and outside a charged conducting sphere.
  • Calculate the work done moving a charge, W=qΔVeW = q\Delta V_\text{e}, in joules and electronvolts, and use energy conservation for moving charges.
  • Sketch and interpret for point charges, parallel plates and conducting spheres, and relate them to field lines.
Before you start3 quick questions on what this builds on
Check yourself
Two point charges of +3.0 μC+\pu{3.0 \mu C} and +5.0 μC+\pu{5.0 \mu C} are 0.20 m\pu{0.20 m} apart in air. Calculate the size of the electric force between them, in N. Give 2 significant figures.
Check yourself
A charge of +2.0 μC+\pu{2.0 \mu C} feels a force of 0.012 N\pu{0.012 N} in an . Calculate the , in units of 103 N C−110^{3}\ \text{N C}^{-1}. Give 2 significant figures.
Check yourself
A 20 kg\pu{20 kg} probe moves from a point where Vg=−5.0⋅107 J kg−1V_\text{g} = \pu{-5.0e7 J kg-1} to a point where Vg=−3.0⋅107 J kg−1V_\text{g} = \pu{-3.0e7 J kg-1}. Calculate the done on it, in units of 10810^{8} J. Give 2 significant figures.

Revise first: 1.1 Describing motion, 1.9 Work and energy transfer, 4.2 Gravitational potential and potential energy, 4.4 Electric charge and Coulomb's law and 4.5 Electric and magnetic field lines

Electric potential energy

In 4.2 you met gravitational potential energy: the work done to bring masses together from infinitely far apart. Electric potential energy works the same way, with one twist. Charges can repel as well as attract.

For two point charges the is:

In the formula booklet
Ep=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}

q1q_1 and q2q_2 are the two charges, with their signs, and rr is the distance between their centres. A charged sphere counts as a point charge at its centre. k=8.99⋅109 N m2 C−2k = \pu{8.99e9 N m2 C-2}, from , comes from the data booklet, like ee and every constant a question does not give. All four equations in this lesson are in the booklet's higher level D.2 section.

Why the sign? Like charges repel. To push them together you must push in the direction they move, so you do positive and EpE_\text{p} is positive. Unlike charges attract. You must hold them back as they come together, so the work is negative and EpE_\text{p} is negative.

Substitute the charges with their signs and the sign comes out right. With three or more charges, add the EpE_\text{p} of every pair: three charges make three pairs.

Worked exampleA +4.0 μC+\pu{4.0 \mu C} point charge and a −2.5 μC-\pu{2.5 \mu C} point charge are 0.15 m\pu{0.15 m} apart. Calculate the electric potential energy of the system.

Try it first, then reveal one step at a time.

  1. Write the equation: Ep=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}, keeping the signs of the charges.
Worked exampleTwo protons are held a small distance apart. Explain why the electric potential energy of the system is positive, and what happens to it when the protons are released.

Try it first, then reveal one step at a time.

  1. Say what the force between them is.
Check yourself
Two point charges, +q+q and −q-q, have an electric potential energy of −0.060 J\pu{-0.060 J}. Their separation is halved. What is the new electric potential energy?
Check yourself
Three point charges, each +2.0 μC+\pu{2.0 \mu C}, sit at the corners of an equilateral triangle of side 0.30 m\pu{0.30 m}. Calculate the electric potential energy of the system, in J. Give 2 significant figures.

Electric potential

Electric potential energy depends on both charges. To describe a point in the field, whatever charge sits there, divide by the charge: energy per coulomb, as for gravity in 4.2.

A test charge is small enough not to disturb the field it measures. For a point charge QQ, the a distance rr away is:

In the formula booklet
Ve=kQrV_\text{e} = \frac{kQ}{r}

QQ is the charge making the field, with its sign. Near a positive charge, VeV_\text{e} is positive and falls towards zero with distance. Near a negative charge, it is negative and rises towards zero. Potential is zero at infinity by definition.

Multiply by the charge placed at the point to get the potential energy: Ep=qVeE_\text{p} = qV_\text{e}. Check: q×kQr=kqQrq \times \frac{kQ}{r} = k\frac{qQ}{r}.

Potential is a scalar: it has a size and a sign but no direction. To find it near several charges, add the potential from each one, signs included. That is much easier than adding field strengths, which are vectors.

Worked exampleCalculate the electric potential 0.040 m\pu{0.040 m} from a point charge of −6.0 nC-\pu{6.0 nC}.

Try it first, then reveal one step at a time.

  1. Write the equation: Ve=kQrV_\text{e} = \frac{kQ}{r}, with Q=−6.0×10−9 CQ = -6.0 \times 10^{-9}\ \text{C}.
Worked exampleFour point charges sit at the corners of a square of side 0.20 m\pu{0.20 m}: +3.0 nC+\pu{3.0 nC}, +3.0 nC+\pu{3.0 nC}, −2.0 nC-\pu{2.0 nC} and +1.0 nC+\pu{1.0 nC}. Determine the electric potential at the point where the diagonals cross.

Try it first, then reveal one step at a time.

  1. Each corner is half a diagonal from the centre: r=0.2022=0.1414 mr = \frac{0.20\sqrt{2}}{2} = 0.1414\ \text{m}.
Check yourself
Point M is midway between a charge +Q+Q and a charge −Q-Q. Which statement about M is correct?
Check yourself
A charge of +8.0 nC+\pu{8.0 nC} is at x=0x = 0 and a charge of −4.0 nC-\pu{4.0 nC} is at x=0.30 mx = \pu{0.30 m}. Calculate the electric potential at x=0.10 mx = \pu{0.10 m}, in V. Give 2 significant figures.

Field strength as a potential gradient

Think of potential as height on a hill. A positive charge is pushed downhill, towards lower potential, and the push is strongest where the slope is steepest. The slope is the :

In the formula booklet
E=−ΔVeΔrE = -\frac{\Delta V_\text{e}}{\Delta r}

ΔVe\Delta V_\text{e} is the change in potential over a small distance Δr\Delta r along the field. The minus sign says the field points the way the potential falls. So a positive charge is pushed towards lower potential, and a negative charge, such as an electron, towards higher potential.

The unit V m−1\text{V m}^{-1} is the same as N C−1\text{N C}^{-1}. Between parallel plates the potential changes steadily, so the is the same everywhere and its size is E=VdE = \frac{V}{d}, as in 4.5. On a graph of VeV_\text{e} against rr, the gradient of the tangent is −E-E.

An isolated charged conducting sphere, solid or hollow, is a key case. The charge spreads over its outer surface, and inside the conductor the field is zero once the charges stop moving. Zero gradient means the potential is the same everywhere inside, equal to its value at the surface, kQR\frac{kQ}{R}.

Two graphs for a positively charged conducting sphere of radius R, solid or hollow, against distance r from its centre. Left: electric potential V. From the centre out to r equals R the line is horizontal at the value k Q over R, so the potential is constant inside. Beyond R it falls along the curve k Q over r, approaching zero far away. Right: electric field strength E. It is zero from the centre out to R, jumps to k Q over R squared at the surface, then falls along the curve k Q over r squared, approaching zero. The flat potential inside goes with the zero field inside. V r R 0 kQ/R inside kQ/r potential V E r R 0 kQ/R² E = 0 kQ/r² field strength E
A charged conducting sphere: flat potential and zero field inside; outside, it acts like a point charge at its centre.

Outside the sphere, the field and potential are those of a point charge QQ at its centre. So VeV_\text{e} falls as kQr\frac{kQ}{r} and has no jump at the surface, while EE jumps from zero to kQR2\frac{kQ}{R^{2}}.

Worked exampleAlong an , the potential is 340 V\pu{340 V} at point A and 310 V\pu{310 V} at point B, 2.0 mm\pu{2.0 mm} further along. Estimate the electric field strength between A and B, and state its direction.

Try it first, then reveal one step at a time.

  1. Change in potential from A to B: ΔVe=310−340=−30 V\Delta V_\text{e} = 310 - 340 = -30\ \text{V}, over Δr=2.0×10−3 m\Delta r = 2.0 \times 10^{-3}\ \text{m}.
Worked exampleA solid metal sphere of radius 0.12 m\pu{0.12 m} carries a charge of +5.0 nC+\pu{5.0 nC}. Determine the electric potential at its centre.

Try it first, then reveal one step at a time.

  1. Inside a conductor the field is zero, so the potential does not change between the surface and the centre.
Check yourself
A charged hollow metal sphere has a potential of 600 V\pu{600 V} at its surface. What is the potential at a point inside it, halfway to the centre?
Check yourself
On a graph of VeV_\text{e} against rr outside a charged sphere, the tangent at one point passes through (0.10 m,900 V)(\pu{0.10 m}, \pu{900 V}) and (0.40 m,0 V)(\pu{0.40 m}, \pu{0 V}). Determine the electric field strength at that point, in units of 103 V m−110^{3}\ \text{V m}^{-1}. Give 2 significant figures.

Work done moving a charge

Potential is energy per coulomb. So the work needed to move a charge qq between two points is the charge times the change in potential:

In the formula booklet
W=qΔVeW = q\Delta V_\text{e}

ΔVe=Vfinal−Vinitial\Delta V_\text{e} = V_\text{final} - V_\text{initial}. WW is the work done on the charge by an outside agent that moves it without changing its speed. It equals the change in electric potential energy.

Keep the sign of qq and the sign of WW follows. Moving a positive charge to higher potential needs positive work. Moving a negative charge there gives negative WW: the field does the work.

If the charge moves freely, with only the electric force on it, the field's work becomes kinetic energy: ΔEk=−qΔVe\Delta E_\text{k} = -q\Delta V_\text{e}. An electron, q=−eq = -e, accelerated through a potential difference VV gains kinetic energy eVeV.

That makes the a natural unit. It is the energy gained by one electron moving through 1 V\pu{1 V}: 1 eV=1.60⋅10−19 J\pu{1 eV} = \pu{1.60e-19 J}. A charge of nene accelerated freely through a potential difference of VV volts gains nVnV electronvolts. Multiply by 1.60×10−191.60 \times 10^{-19} to convert to joules.

Worked exampleA charge of +2.0 μC+\pu{2.0 \mu C} is moved from a point where the potential is −150 V\pu{-150 V} to a point where it is +250 V\pu{+250 V}. Calculate the work done on the charge.

Try it first, then reveal one step at a time.

  1. Change in potential: ΔVe=250−(−150)=400 V\Delta V_\text{e} = 250 - (-150) = 400\ \text{V}.
Worked exampleAn alpha particle, charge +2e+2e, has a kinetic energy of 3.0 MeV\pu{3.0 MeV} far from a tin nucleus, charge +50e+50e. It moves straight towards the nucleus. Determine the distance of closest approach. Assume the nucleus does not move.

Try it first, then reveal one step at a time.

  1. Far away, Ep=0E_\text{p} = 0. At closest approach the alpha particle stops for an instant, so all its kinetic energy has become electric potential energy: Ek=kq1q2rE_\text{k} = k\frac{q_1 q_2}{r}.
Check yourself
An alpha particle, charge +2e+2e, starts at rest and is accelerated through 1500 V\pu{1500 V}. Calculate the kinetic energy it gains, in keV. Give 2 significant figures.
Check yourself
An electron is moved from a point at +40 V\pu{+40 V} to a point at +10 V\pu{+10 V}, without changing its speed. What is the work done on it?

Equipotential surfaces

Join up all the points at the same electric potential and you get an , like a contour line on a map. On paper it shows up as a line.

Along an equipotential, ΔVe=0\Delta V_\text{e} = 0, so W=qΔVe=0W = q\Delta V_\text{e} = 0. No work is done moving a charge between two points on the same equipotential, whatever path it takes. The field still acts, but it has no component along the surface.

So always cross equipotentials at right angles, pointing from higher to lower potential. Drawn at equal steps of potential, equipotentials crowd together where the field is strong and spread out where it is weak.

Three sketches of electric field lines, drawn solid with arrows, and equipotentials, drawn dashed. Left: a positive point charge with eight field lines pointing radially outwards and three concentric circular equipotentials at equal steps of potential; the gaps between the circles grow with distance. Centre: a positive charge on the left and a negative charge of equal size on the right. Field lines curve from the positive charge to the negative one. Closed equipotential loops surround each charge, and a straight vertical equipotential, the zero of potential, runs halfway between them. Right: two parallel plates, positive on top and negative below, with straight, equally spaced field lines pointing down between them and equally spaced horizontal equipotentials. At the ends of the plates the field lines bow outwards and the equipotentials curve. In every sketch the field lines cross the equipotentials at right angles. field line equipotential + point charge equal steps in V: gaps grow + − V = 0 two opposite charges V = 0 halfway between + + + + + + − − − − − − parallel plates uniform in the middle: equal gaps
Field lines cross equipotentials at right angles. Closer equipotentials mean a stronger field.

Point charge: concentric spheres around it, spreading out with distance because the field weakens. Parallel plates: in the middle the field is uniform, so the equipotentials are flat, equally spaced and parallel to the plates. At the edges the field weakens and they curve.

Several charges: close to each charge, the equipotentials are almost spheres around it. Between equal and opposite charges, the halfway plane is at Ve=0V_\text{e} = 0. Far from a group whose total charge is not zero, they look like those of one charge equal to the total.

Conducting sphere, solid or hollow: the whole conductor, including any space inside, is one equipotential at kQR\frac{kQ}{R}. Outside, the equipotentials are concentric spheres, as for a point charge at its centre.

Worked exampleEquipotential surfaces are drawn around a point charge of +12 nC+\pu{12 nC} at 600 V\pu{600 V}, 400 V\pu{400 V} and 200 V\pu{200 V}. Determine the distance between the 400 V\pu{400 V} and 200 V\pu{200 V} surfaces.

Try it first, then reveal one step at a time.

  1. Rearrange Ve=kQrV_\text{e} = \frac{kQ}{r}: r=kQVer = \frac{kQ}{V_\text{e}}, with kQ=8.99×109×12×10−9=107.9 V mkQ = 8.99 \times 10^{9} \times 12 \times 10^{-9} = 107.9\ \text{V m}.
Worked exampleExplain why no work is done when a charge moves along an equipotential surface, and deduce the angle between electric field lines and equipotential surfaces.

Try it first, then reveal one step at a time.

  1. Use the definition of an equipotential.
Check yourself
A charge of +5.0 μC+\pu{5.0 \mu C} moves 0.30 m\pu{0.30 m} along a curved path on the 200 V\pu{200 V} equipotential. What is the work done on it by the electric field?
Check yourself
Two parallel plates are 20 mm\pu{20 mm} apart with a potential difference of 120 V\pu{120 V} between them. Equipotentials are drawn every 20 V\pu{20 V}, from one plate to the other. Calculate the spacing of the equipotentials away from the edges, in mm. Give 2 significant figures.

Common mistakes

  • Squaring rr in EpE_\text{p} or VeV_\text{e}. Only the force and the field strength go as 1r2\frac{1}{r^{2}}; energy and potential go as 1r\frac{1}{r}.
  • Dropping the signs of the charges. An electron has q=−eq = -e, and the sign of EpE_\text{p}, VeV_\text{e} and WW comes from the signs you substitute.
  • Adding potentials as vectors, or thinking Ve=0V_\text{e} = 0 where E=0E = 0. Potentials add as signed numbers; fields add as arrows.
  • Using kQr\frac{kQ}{r} inside a charged conducting sphere. Inside, the potential stays at its surface value, kQR\frac{kQ}{R}, and the field is zero.
  • Mixing electronvolts and joules. Convert with 1 eV=1.60⋅10−19 J\pu{1 eV} = \pu{1.60e-19 J} before using kq1q2rk\frac{q_1 q_2}{r}.
  • Drawing field lines along equipotentials. They always cross at right angles.

Exam tips

  • "State what is meant by electric potential at a point": the work done per unit positive test charge in bringing it from infinity to the point. "Per unit charge" and "from infinity" both earn credit.
  • Distance of closest approach, head-on to a nucleus that stays put: write Ek=kq1q2rE_\text{k} = k\frac{q_1 q_2}{r}, convert MeV to J, substitute with charges in coulombs, then give rr with its unit. Each step is a mark in Paper 2.
  • "Sketch" VeV_\text{e} against rr: positive charge, positive curve falling as 1r\frac{1}{r} towards zero; for a conducting sphere, flat inside and continuous at the surface.
  • In Paper 1A equipotential questions, look for right angles with the field lines, closer spacing where the field is stronger, and W=0W = 0 along any path that starts and ends on the same equipotential.

Key takeaways

In bookletEp=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}
In bookletVe=kQrV_\text{e} = \frac{kQ}{r}
Learn thisEpE_\text{p} and VeV_\text{e} are zero at infinity. VeV_\text{e} has the sign of the charge making it; EpE_\text{p} is positive for like charges, negative for unlike. Potential is a scalar: add it from each charge, signs included. Ep=qVeE_\text{p} = qV_\text{e}.
In bookletE=−ΔVeΔrE = -\frac{\Delta V_\text{e}}{\Delta r}
In bookletW=qΔVeW = q\Delta V_\text{e}
Learn this1 eV=1.60⋅10−19 J\pu{1 eV} = \pu{1.60e-19 J}. A charge qq acted on only by the electric force gains ΔEk=−qΔVe\Delta E_\text{k} = -q\Delta V_\text{e}; an electron through VV gains eVeV.
Learn thisNo work is done along an equipotential. Field lines cross equipotentials at right angles, towards lower potential. A conductor whose charges are at rest is one equipotential, with zero field inside.

Practise this

98 past-paper questions on Electric charge, fields, potential and energy in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Electric charge, fields, potential and energy →