3.3 · SLPaper 1Paper 2

Travelling waves

In a minute

A carries energy from place to place without carrying the material along with it. In a the oscillations are perpendicular to the direction of travel; in a , such as sound, they are parallel. Every wave obeys v=fλv = f\lambda, and all cross a vacuum at the .

You'll be able to

  • Describe how the particles move in transverse and longitudinal waves, and find compressions and rarefactions on a graph.
  • Use v=fλ=λTv = f\lambda = \frac{\lambda}{T}, reading the and from graphs.
  • Explain what a sound wave is and how it travels through a medium.
  • Describe electromagnetic waves and place each region of the spectrum by its wavelength.
  • Compare mechanical waves with electromagnetic waves.
Before you start3 quick questions on what this builds on
Check yourself
A mass on a spring completes 30 oscillations in 12 s\pu{12 s}. What is its , in Hz?
Check yourself
A cyclist rides 450 m\pu{450 m} in 90 s\pu{90 s} at a constant . What is the speed, in m s−1\text{m s}^{-1}?
Check yourself
The tip of a vibrating ruler moves back and forth between two points 30 mm\pu{30 mm} apart. What is the of its oscillation?

Revise first: 1.1 Describing motion, 1.8 Circular motion, 2.4 Thermal radiation and black bodies and 3.1 Simple harmonic motion

Transverse and longitudinal waves

Flick one end of a long rope and a bump runs to the far end. The rope itself goes nowhere. What travels is the disturbance, and the energy it carries.

The material a mechanical wave passes through, such as a rope, water or air, is the medium. Each particle oscillates about its rest position and passes the motion on to its neighbour.

A longitudinal wave has compressions, where the particles are closer together than normal, and rarefactions, where they are further apart. In a gas, compressions are regions of higher pressure and rarefactions regions of lower pressure.

Two waves, both travelling to the right. Top, a transverse wave on a rope: a smooth wave shape of crests and troughs. One marked point on the rope has a double-headed arrow pointing up and down, labelled oscillation, at right angles to the arrow labelled direction of travel. Bottom, a longitudinal wave on a slinky spring, drawn as a row of vertical coils. In some places the coils are bunched together, labelled C for compression, and in between they are spread apart, labelled R for rarefaction. One marked coil has a double-headed arrow pointing left and right, labelled oscillation, parallel to the arrow labelled direction of travel. transverse (a rope) direction of travel oscillation longitudinal (a slinky spring) C C C R R R R oscillation direction of travel
Transverse: oscillation across the direction of travel. Longitudinal: oscillation along it.

A particle's speed keeps changing as it oscillates: fastest at its rest position, zero at its largest displacement. This particle speed is not the wave speed.

A displacement–position graph of a transverse wave is a snapshot of the rope. To find which way a point is moving, picture the shape shifted a little in the direction of travel.

For a longitudinal wave the same graph is not a picture. It shows each particle's displacement along the line of travel, with forwards (the direction of travel) as positive.

At a compression, particles just behind are displaced forwards and particles just ahead backwards. So, reading along the direction of travel, a compression is where the displacement crosses zero from positive to negative. A rarefaction is where it crosses from negative to positive.

Top: a displacement against position graph for a longitudinal wave travelling to the right. Displacement to the right is positive. The curve starts at zero, rises to a positive maximum, falls through zero at half a wavelength, reaches a negative minimum, and returns to zero at one wavelength, then repeats. Bottom: the same particles drawn as dots, lined up under the graph. Where the curve crosses zero going from positive to negative, the dots are bunched together: this is labelled compression. Where the curve crosses zero going from negative to positive, the dots are spread out: this is labelled rarefaction. Dashed vertical lines join each crossing point on the graph to the matching compression or rarefaction. position x displacement s (positive = to the right) 0 compression compression rarefaction rarefaction direction of travel
Compressions and rarefactions sit where the displacement is zero, not at the peaks of the graph.
Worked exampleA student moves one end of a long horizontal rope up and down, and a wave runs along it to the far end. Describe how energy reaches the far end, and explain whether the rope itself travels with the wave.

Try it first, then reveal one step at a time.

  1. Say what the source does, how the motion is passed on, the direction of oscillation, then what happens to the material.
Worked exampleA longitudinal wave travels in the positive xx direction along a slinky. At one instant, the coils between x=0x = 0 and x=0.35 mx = \pu{0.35 m} are displaced in the positive direction. The coils between x=0.35 mx = \pu{0.35 m} and x=0.70 mx = \pu{0.70 m} are displaced in the negative direction. Determine where in this stretch there is a compression.

Try it first, then reveal one step at a time.

  1. Positive direction: +x+x, the direction of travel.
Check yourself
A transverse wave travels to the right along a string. Point P is halfway between a crest just to its left and a trough just to its right. Which way is P moving at this instant?
Check yourself
A loudspeaker plays a note and you hear it across the room. What has travelled from the loudspeaker to your ear?

Wavelength, frequency and wave speed

Time one particle's oscillation, or measure one cycle along the wave at an instant: these describe every wave.

The AA is the largest displacement of a particle from its rest position (3.1 writes it x0x_0 for an oscillator). The TT is the time for one particle to make one complete oscillation. The ff is the number of oscillations per second, f=1Tf = \frac{1}{T}, in hertz (Hz).

In one period, each particle makes one oscillation and the wave moves forward by one wavelength. is distance divided by time, so the wave speed is v=λTv = \frac{\lambda}{T}. Since 1T=f\frac{1}{T} = f, this is also v=fλv = f\lambda.

In the formula booklet
v=fλ=λTv = f\lambda = \frac{\lambda}{T}

It is in section C.2 of the data booklet and works for every wave, sound and light included.

Two graphs side by side. Left: displacement against position x for a wave at one instant. A sine-shaped curve; the horizontal distance from one crest to the next is labelled wavelength, lambda, and the distance from the zero line down to a trough is labelled amplitude, A. Right: displacement against time t for one particle of the medium. A sine-shaped curve of the same height; the time from one peak to the next is labelled period, T, and the distance from the zero line down to a trough is again labelled amplitude, A. displacement position x one instant, many particles wavelength λ A displacement time t one particle, over time period T A
Read λ\lambda from a displacement–position graph and TT from a displacement–time graph.

The source sets the frequency, and the medium sets the speed. So when a wave passes into a new medium, its frequency stays the same while its speed changes. Its wavelength changes to match: λ=vf\lambda = \frac{v}{f}.

Worked exampleA dipper in a ripple tank vibrates at 12 Hz\pu{12 Hz}. A student measures 0.15 m\pu{0.15 m} across 6 neighbouring crests. Calculate the speed of the ripples.

Try it first, then reveal one step at a time.

  1. 6 crests have 5 gaps between them, so the distance is 5 wavelengths: λ=0.155=0.030 m\lambda = \frac{0.15}{5} = \pu{0.030 m}.
Worked exampleTwo graphs describe a wave on a rope. The displacement–position graph shows exactly 3 complete waves along 3.6 m\pu{3.6 m} of rope. The displacement–time graph for one point on the rope shows a period of 0.40 s\pu{0.40 s}. Determine the speed of the wave.

Try it first, then reveal one step at a time.

  1. From the displacement–position graph: λ=3.63=1.2 m\lambda = \frac{3.6}{3} = \pu{1.2 m}.
Check yourself
Crests of an ocean swell pass the end of a pier every 12 s\pu{12 s}. Neighbouring crests are 180 m\pu{180 m} apart. What is the speed of the swell, in m s−1\text{m s}^{-1}?
Check yourself
A sound of frequency 425 Hz\pu{425 Hz} passes from air into water. It travels at 340 m s−1\pu{340 m s-1} in air and 1480 m s−1\pu{1480 m s-1} in water. What is its wavelength in water, in m? Give 3 significant figures.

Sound waves

A loudspeaker cone vibrates. Moving forwards, it squashes the air into a compression, a region of higher pressure. Moving back, it leaves a rarefaction, a region of lower pressure.

Each layer of air pushes on the next, so the compressions and rarefactions travel outwards. The molecules oscillate along the direction of travel, so sound is a longitudinal wave of pressure changes.

Sound is a mechanical wave: it needs a medium of particles to pass the oscillation on. It travels through gases, liquids and solids, but not through a vacuum.

Sound in air and liquids is always longitudinal: a fluid has no force pulling a layer back if it slides sideways. Solids can also carry transverse mechanical waves, such as some earthquake waves.

Sound travels at about 340 m s−1\pu{340 m s-1} in air at room temperature, about 1500 m s−1\pu{1500 m s-1} in water and several thousand m s−1\text{m s}^{-1} in steel. Sound is generally slowest in gases and fastest in solids.

Worked exampleA boat's echo sounder sends a short pulse of ultrasound (sound too high to hear) straight down. The echo from the seabed returns 0.084 s\pu{0.084 s} later. Sound travels at 1520 m s−1\pu{1520 m s-1} in seawater. Calculate the depth of the water.

Try it first, then reveal one step at a time.

  1. The pulse goes down and back up, so it travels twice the depth: 2d=vt2d = vt.
Worked exampleExplain how a loudspeaker sends a sound wave through the air to a listener, and why the air next to the loudspeaker never reaches the listener.

Try it first, then reveal one step at a time.

  1. Go from the source, to the compressions and rarefactions, to how they travel, to what each molecule does.
Check yourself
An electric bell rings inside a sealed glass jar. A pump slowly removes the air from the jar. What happens to the sound you hear?
Check yourself
In a sound wave in air, where is the air pressure highest?

Electromagnetic waves

Light, radio waves and X-rays seem very different, but they are the same kind of wave. Nothing material oscillates: an electric field and a magnetic field do.

Accelerating charges, such as electrons moving up and down a radio aerial, give out electromagnetic waves. A changing electric field produces a magnetic field and a changing magnetic field produces an electric field, so each keeps the other going.

An electromagnetic wave drawn in perspective, travelling to the right along a horizontal axis labelled direction of travel. An electric field wave, labelled E, oscillates up and down in a vertical plane. A magnetic field wave, labelled B, oscillates in a horizontal plane, drawn slanting into and out of the page. The two waves have the same wavelength and reach their peaks at the same places. Small arrows from the axis show the field directions: the electric field arrows are vertical, the magnetic field arrows are horizontal, and both are at right angles to the direction of travel. direction of travel E (electric field) B (magnetic field)
The electric field (EE) and magnetic field (BB) oscillate in phase, at right angles to each other and to the direction of travel.

The fields oscillate perpendicular to the direction of travel, so every electromagnetic wave is transverse. No particles are needed, so they cross the vacuum between the Sun and the Earth.

In a vacuum, every electromagnetic wave travels at the same speed, the : c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1}. This value is in the data booklet; use it when a question doesn't give the speed. In air the speed is almost exactly cc, and in a vacuum c=fλc = f\lambda.

The groups them by wavelength, as the data booklet shows. From shortest to longest: gamma rays (10−1210^{-12} m and shorter), X-rays (about 10−1010^{-10} m), ultraviolet (about 10−810^{-8} m), visible light (400 to 700 nm), infrared (about 10−510^{-5} m), microwaves (about 10−210^{-2} m) and radio waves (about 1 m and longer).

The electromagnetic spectrum drawn as a horizontal band, with wavelength in metres on a scale where each mark is a hundred times the last, from 10 to the minus 14 on the left to 10 to the 4 on the right. From left to right the regions are: gamma rays, about 10 to the minus 12 metres and shorter; X-rays, about 10 to the minus 10 metres; ultraviolet, about 10 to the minus 8 metres; a narrow visible band from 400 to 700 nanometres; infrared, about 10 to the minus 5 metres; microwaves, about 10 to the minus 2 metres; and radio waves, about 1 metre and longer. An arrow along the top points left, labelled frequency increases; an arrow along the bottom points right, labelled wavelength increases. gamma X-rays UV infrared microwaves radio waves visible: 400–700 nm 10−14 10−12 10−10 10−8 10−6 10−4 10−2 100 102 104 wavelength / m frequency increases wavelength increases
Approximate wavelengths. The boundaries between regions are not sharp.

They all share one speed in a vacuum, so from c=fλc = f\lambda a shorter wavelength means a higher frequency. Gamma rays have the highest frequencies and radio waves the lowest.

Worked exampleA radio station broadcasts at 96.4 MHz\pu{96.4 MHz}. Its radio waves travel through the air at cc. Calculate their wavelength.

Try it first, then reveal one step at a time.

  1. Convert: f=96.4×106f = 96.4 \times 10^{6} Hz.
Worked exampleElectromagnetic radiation of frequency 6.0⋅1017 Hz\pu{6.0e17 Hz} travels through a vacuum. Calculate its wavelength and identify the region of the spectrum it belongs to.

Try it first, then reveal one step at a time.

  1. λ=cf=3.00×1086.0×1017\lambda = \frac{c}{f} = \frac{3.00 \times 10^{8}}{6.0 \times 10^{17}}.
Check yourself
An electromagnetic wave travels horizontally towards the east. At one point its electric field oscillates vertically. Along which line does its magnetic field oscillate?
Check yourself
Which list is in order of increasing frequency?

Mechanical and electromagnetic waves compared

Both kinds transfer energy without transferring matter, and both obey v=fλv = f\lambda. They differ in four ways.

1. Medium. Mechanical waves, such as sound, waves on a rope and water waves, need a medium. Electromagnetic waves need none and can travel through a vacuum.

2. What oscillates. In a mechanical wave, the particles of the medium oscillate. In an electromagnetic wave, electric and magnetic fields oscillate.

3. Type. Mechanical waves can be transverse (a rope) or longitudinal (sound). Electromagnetic waves are always transverse.

4. Speed. All electromagnetic waves travel at c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1} in a vacuum. Mechanical waves are far slower, and their speed depends on the medium: about 340 m s−1\pu{340 m s-1} for sound in air.

Worked exampleDuring a storm you see a lightning flash and hear its thunder 4.5 s\pu{4.5 s} later. The speed of sound in air is 340 m s−1\pu{340 m s-1}. Estimate how far away the lightning struck, in km, and explain why the light's travel time can be ignored.

Try it first, then reveal one step at a time.

  1. Light covers the distance in microseconds (15303.00×108≈5×10−6\frac{1530}{3.00 \times 10^{8}} \approx 5 \times 10^{-6} s), so the delay is the sound's travel time.
Worked exampleTwo astronauts work outside a space station, a few metres apart. Explain why one cannot hear the other shout, but they can talk by radio.

Try it first, then reveal one step at a time.

  1. Classify each wave, then say what each one needs to travel.
Check yourself
Which statement is true for sound waves but not for light waves?
Check yourself
A spectator sits 170 m\pu{170 m} from a drummer across a stadium. The speed of sound in air is 340 m s−1\pu{340 m s-1}. How long after seeing a drumbeat does she hear it, in s?

Common mistakes

  • Saying the medium travels with the wave. Each particle oscillates about a fixed rest position; only the energy and the wave pattern move along.
  • Defining transverse as "up and down". Compare the oscillation with the direction of energy transfer: perpendicular for transverse, parallel for longitudinal.
  • Mixing up the particle speed and the wave speed. A particle speeds up and slows down as it oscillates; v=fλv = f\lambda is how fast the wave pattern moves.
  • Saying the frequency changes when a wave enters a new medium. The frequency stays the same; the speed and the wavelength change.

Exam tips

  • "State" what a transverse or longitudinal wave is: compare the oscillation with the direction of energy transfer. "Up and down" alone does not earn the mark.
  • "Outline" a difference between sound and electromagnetic waves: give one property for both, such as "sound needs a medium, but electromagnetic waves can travel through a vacuum".
  • "Determine" a wave speed: write v=fλv = f\lambda or v=λTv = \frac{\lambda}{T}, substitute in SI units, then give the answer with its unit.

Key takeaways

Learn thisA travelling wave transfers energy by oscillations, with no net transfer of matter.
Learn thisTransverse: oscillations perpendicular to the direction of energy transfer. Longitudinal: oscillations parallel to it, with compressions and rarefactions.
In bookletv=fλ=λTv = f\lambda = \frac{\lambda}{T}
Learn thisThe source sets the frequency. When a wave changes medium, its frequency stays the same; its speed and wavelength change.
Learn thisSound is a longitudinal mechanical wave of pressure changes. It needs a medium, and travels at about 340 m s−1\pu{340 m s-1} in air.
Learn thisElectromagnetic waves are transverse oscillations of electric and magnetic fields. All travel at c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1} in a vacuum.
Learn thisIn order of increasing wavelength: gamma rays, X-rays, ultraviolet, visible (400 to 700 nm), infrared, microwaves, radio waves.

Practise this

61 past-paper questions on Wave model and characteristics in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Wave model and characteristics →