3.5 · SLPaper 1Paper 2

Superposition and double-slit interference

In a minute

When two overlap, their displacements add: this is . Two sources give a steady pattern of loud and quiet (or bright and dark) points, and the to each point decides which it is. Young's experiment uses this pattern to measure the of light with s=λDds = \frac{\lambda D}{d}.

You'll be able to

  • Add the displacements of overlapping waves and pulses to find the resultant displacement.
  • Explain what coherent sources are and why interference needs them.
  • Use the path difference to decide whether a point shows or .
  • Use s=λDds = \frac{\lambda D}{d} to find a fringe separation, a wavelength, a slit separation or a screen distance.
  • Explain how double-slit fringes form, predict how they change, and what they show about light.
Before you start3 quick questions on what this builds on
Check yourself
A sound wave of 430 Hz\pu{430 Hz} travels through air at 344 m s−1\pu{344 m s-1}. What is its wavelength, in m? Give 3 significant figures.
Check yourself
Plane water waves pass through a gap in a barrier. When do they spread out most after the gap? This spreading is .
Check yourself
A point on a rope oscillates between 6 cm\pu{6 cm} above and 6 cm\pu{6 cm} below its rest position. What is the of its oscillation?

Revise first: 2.4 Thermal radiation and black bodies, 3.1 Simple harmonic motion, 3.3 Travelling waves and 3.4 Reflection, refraction and Snell's law

Superposition of waves and pulses

Drop two stones into a pond. Where the ripples cross, each set passes straight through the other. While they overlap, the water's displacement is the two displacements added together.

Displacement has a direction, so give it a sign. Take up as positive. A crest then adds a positive displacement and a trough a negative one, so a crest and a trough can cancel.

A pulse is a single short disturbance. Pulses add while they overlap, then separate with their original shapes and speeds.

Three snapshots of a stretched rope, one above the other. Top, before: pulse A, 3 centimetres high, on the left moving right, and pulse B, 2 centimetres high, on the right moving left. Middle, overlapping: the two pulses are at the same place, shown dashed, and the rope forms a single pulse 5 centimetres high. Bottom, after: pulse A is now on the right still moving right and pulse B on the left still moving left, each with its original height. before A: 3 cm B: 2 cm overlapping A + B: 5 cm after A: 3 cm B: 2 cm
While the pulses overlap the rope's displacement is 3+2=5 cm3 + 2 = \pu{5 cm}. Afterwards each pulse is unchanged.
Worked exampleOn a long spring, a pulse of height 18 mm\pu{18 mm} travels to the right. An inverted pulse of depth 11 mm\pu{11 mm}, with the same shape and width, travels to the left. Taking upwards as positive, determine the displacement where the two peaks coincide.

Try it first, then reveal one step at a time.

  1. Positive direction: up. The first pulse gives +18+18 mm and the inverted one −11-11 mm at the same point.
Worked exampleTwo pulses of equal size, one upward and one downward, travel towards each other along a rope. At one instant the rope is completely straight. Explain why, and outline what happens next.

Try it first, then reveal one step at a time.

  1. Name the principle, apply it, then say what happens next.
Check yourself
At one point and one instant, wave P gives a displacement of −4.0 mm\pu{-4.0 mm} and wave Q gives +1.5 mm\pu{+1.5 mm}. What is the resultant displacement?
Check yourself
Two pulses pass through each other on a string. What are they like once they have separated?

Phase difference and coherent sources

Interference is the superposition of two continuous waves, usually from two sources. For a visible pattern, the waves must stay in step, or out of step by a fixed amount.

Oscillations are in phase when the phase difference is zero, or a whole number of cycles. They are in antiphase when it is half a cycle, π\pi rad or 180∘180^\circ (plus any whole number of cycles): one at a crest when the other is at a trough.

Along a wave, one wavelength is one whole cycle. So two points a distance Δx\Delta x apart, or two waves whose paths differ by Δx\Delta x, have this phase difference Δϕ\Delta\phi:

Learn this
Δϕ=Δxλ×2π\Delta\phi = \frac{\Delta x}{\lambda} \times 2\pi
Worked exampleTwo corks float on a water wave. They are 0.15 m\pu{0.15 m} apart along the direction the wave travels, and the wavelength is 0.60 m\pu{0.60 m}. Calculate the phase difference between their oscillations, in radians.

Try it first, then reveal one step at a time.

  1. One wavelength is one cycle, 2π2\pi rad.

Coherent sources need not be in phase; the phase difference only has to stay the same. Waves of different frequencies keep drifting in and out of step.

Two separate lamps are not coherent. Each emits light in short random bursts, so their phase difference changes randomly, far too fast for a steady pattern.

To get coherent waves, split the waves from one source. In Young's experiment both slits are lit by one laser beam, or by one narrow slit in front of a lamp. Two loudspeakers on one signal generator are coherent.

Worked exampleTwo loudspeakers each run from their own signal generator, both set to the same dial reading. A listener walking across the room hears no fixed loud or quiet spots. With both speakers on one generator, fixed loud and quiet spots appear. Explain this.

Try it first, then reveal one step at a time.

  1. Ask what stays constant in each set-up, and link that to the pattern.
Check yourself
Which pair of sources is coherent?
Check yourself
Two points on a wave of wavelength 2.4 m\pu{2.4 m} are 0.90 m\pu{0.90 m} apart along its direction of travel. What is the phase difference between them, in degrees?

Path difference: constructive and destructive interference

Two coherent sources, S1S_1 and S2S_2, in phase, send waves to a point P. The extra distance one wave travels is the : Δx=S2P−S1P\Delta x = S_2P - S_1P.

Each circular below is a crest or a trough. Along some lines crests always meet crests; along others, crests meet troughs.

Two sources, S1 and S2, two wavelengths apart on the left edge, send circular waves to the right. Crests are solid arcs and troughs are dashed arcs. Along the centre line, equidistant from both sources, crests meet crests: a maximum where the path difference is zero. On each side of it a curved line where crests meet troughs is labelled minimum, path difference half a wavelength. Further out on each side a curved line is labelled maximum, path difference one wavelength. S₁ S₂ maximum Δx = 0 minimum Δx = λ/2 minimum Δx = λ/2 maximum Δx = λ maximum Δx = λ
Two in-phase sources. Solid arcs are crests, dashed arcs troughs; Δx\Delta x is the path difference.

If Δx\Delta x is a whole number of wavelengths, the waves arrive in phase: crest on crest, trough on trough. If it is a whole number plus a half, they arrive in antiphase: crest on trough.

In the formula booklet
constructive: path difference=nλ\text{constructive: path difference} = n\lambda
In the formula booklet
destructive: path difference=(n+12)λ\text{destructive: path difference} = \left(n + \tfrac{1}{2}\right)\lambda

Here nn is a whole number: 0,1,2,…0, 1, 2, \ldots Both conditions are printed in section C.3 of the data booklet. They apply to sources in phase. For sources in antiphase the two conditions swap over.

gives a resultant amplitude A1+A2A_1 + A_2: a loud point, or a bright fringe. gives ∣A1−A2∣|A_1 - A_2|. That is zero, with zero , only when the two amplitudes are equal.

Worked exampleTwo loudspeakers, driven by one signal generator, emit sound in phase at 860 Hz\pu{860 Hz}. The speed of sound is 344 m s−1\pu{344 m s-1}. A microphone is 3.20 m\pu{3.20 m} from one speaker and 4.40 m\pu{4.40 m} from the other. Determine whether the microphone is at a point of constructive or destructive interference.

Try it first, then reveal one step at a time.

  1. Wavelength: λ=vf=344860=0.400 m\lambda = \frac{v}{f} = \frac{344}{860} = \pu{0.400 m}.
Worked exampleTwo dippers vibrate in phase in a ripple tank. At point Q, which is 0.27 m\pu{0.27 m} further from one dipper than the other, the water stays still. Determine the longest wavelength the ripples could have.

Try it first, then reveal one step at a time.

  1. Still water means destructive interference: Δx=(n+12)λ\Delta x = \left(n + \tfrac{1}{2}\right)\lambda.
Check yourself
Two coherent sources in phase send waves of amplitude 3.0 mm\pu{3.0 mm} and 1.2 mm\pu{1.2 mm} to a point where the path difference is 1.5λ1.5\lambda. What is the resultant amplitude there?
Check yourself
Two loudspeakers emit sound in phase. A quiet point is 0.75 m\pu{0.75 m} further from one speaker than the other. Which of these could be the wavelength?

Young's double-slit experiment

In the early 1800s Thomas Young shone light through two narrow slits close together. On a screen he saw evenly spaced bright and dark bands, called fringes: .

Side view of Young's double-slit experiment, not to scale. A laser on the left sends a beam to a barrier with two narrow slits, S1 and S2, a small distance d apart. A screen stands a distance D to the right of the slits. On the screen is a column of evenly spaced bright fringes with dark gaps between them. The central bright fringe lies on the centre line, where the path difference is zero. Lines from S1 and S2 meet at point P, the next bright fringe up, where the path difference is one wavelength. The fringe separation s is marked between the centres of two neighbouring bright fringes. laser S₁ S₂ d screen D P: path difference = λ central bright fringe, Δx = 0 s
Not to scale: in practice DD is about a metre or more, while dd is a fraction of a millimetre.

Light diffracts as it passes through each narrow slit, so the waves from the two slits spread out and overlap on the screen. Both slits are lit by the same beam, so the two waves are coherent and in phase.

At the centre of the screen the two paths are equal, so there is a bright fringe. Moving outwards, the path difference grows: λ\lambda at the next bright fringe, then 2λ2\lambda, and so on. Halfway between, it is λ2,3λ2,…\frac{\lambda}{2}, \frac{3\lambda}{2}, \ldots, and the screen is dark.

In the formula booklet
s=λDds = \frac{\lambda D}{d}

ss is the fringe separation, between the centres of neighbouring bright (or dark) fringes. dd is the slit separation, centre to centre. DD is the slit-to-screen distance.

It assumes normal incidence and DD much larger than dd and ss. Put every length in metres before you substitute.

Worked exampleA green laser of wavelength 532 nm\pu{532 nm} shines on two slits 0.250 mm\pu{0.250 mm} apart. The screen is 1.80 m\pu{1.80 m} from the slits. Calculate the fringe separation.

Try it first, then reveal one step at a time.

  1. Convert to metres: λ=532×10−9 m\lambda = 532 \times 10^{-9}\text{ m}, d=0.250×10−3 md = 0.250 \times 10^{-3}\text{ m}.
Worked exampleIn a double-slit experiment the slits are 0.400 mm\pu{0.400 mm} apart and the screen is 2.10 m\pu{2.10 m} away. A student measures 21.0 mm\pu{21.0 mm} from the centre of the 1st bright fringe to the centre of the 8th. Determine the wavelength of the light, in nm.

Try it first, then reveal one step at a time.

  1. From the 1st to the 8th bright fringe there are 8−1=78 - 1 = 7 gaps, so s=21.07=3.00 mms = \frac{21.0}{7} = \pu{3.00 mm}.
Worked exampleMonochromatic light passes through a double slit and forms bright and dark fringes on a screen. Explain how the fringes are formed.

Try it first, then reveal one step at a time.

  1. One marking point per sentence: diffraction, coherence, superposition, then the two path-difference conditions.
Check yourself
Light of wavelength 650 nm\pu{650 nm} falls on two slits 0.500 mm\pu{0.500 mm} apart, and the screen is 2.40 m\pu{2.40 m} away. What is the fringe separation, in mm? Give 3 significant figures.
Check yourself
Fringes 1.6 mm\pu{1.6 mm} apart are formed with light of wavelength 480 nm\pu{480 nm} on a screen 1.50 m\pu{1.50 m} from the slits. What is the slit separation?

Changing the pattern, and what it shows about light

Worked exampleIn a double-slit experiment the fringes are 2.4 mm\pu{2.4 mm} apart. The slit separation is then halved, and the screen is moved from 1.2 m\pu{1.2 m} to 1.8 m\pu{1.8 m} from the slits. Calculate the new fringe separation.

Try it first, then reveal one step at a time.

  1. s∝Dds \propto \frac{D}{d}, so scale the old value by each change.

White light contains every visible wavelength, and each makes its own set of fringes. Red light, with the longest wavelength, has the widest spacing; violet has the narrowest.

Worked exampleThe laser in a double-slit experiment is replaced by a white-light source with a single narrow slit in front of it. Predict and explain the pattern on the screen.

Try it first, then reveal one step at a time.

  1. Start at the centre, then use s∝λs \propto \lambda for the fringes either side.

Young's fringes are evidence that light is a wave. Two streams of particles would only add, giving brighter light where they overlap. Dark fringes need waves that cancel.

Check yourself
In a double-slit experiment the laser is swapped for one of shorter wavelength. Nothing else changes. What happens to the fringes?
Check yourself
Fringes are 2.0 mm\pu{2.0 mm} apart. The slit-to-screen distance is doubled, and the wavelength is changed from 600 nm\pu{600 nm} to 450 nm\pu{450 nm}. What is the new fringe separation?

Common mistakes

  • Writing that the waves "meet" or "cancel" without saying how. Name superposition, and say they arrive in antiphase: crest on trough.
  • Writing "out of phase" with no angle. Out of phase by 90∘90^\circ does not give a minimum; antiphase (180∘180^\circ) does.
  • Counting fringes instead of gaps. From the 1st to the 8th bright fringe there are 7 fringe separations.
  • Mixing nm, mm and m in s=λDds = \frac{\lambda D}{d}. Convert to metres first.
  • Calling sources coherent because they are "the same". The test is the same frequency and a constant phase difference.

Exam tips

  • "Explain" the double-slit pattern: give diffraction at each slit, coherent waves superposing, then path difference nλn\lambda for bright and (n+12)λ\left(n + \tfrac{1}{2}\right)\lambda for dark, one point per sentence.
  • "Explain" why sources must be coherent: a constant phase difference fixes the maxima and minima, so the pattern stays still.
  • "Determine" a wavelength from fringes: show ss (distance ÷ number of gaps), the rearranged equation, then the answer with its unit.
  • In Paper 1A, for a change to the set-up, multiply ss by the factor each change makes.

Key takeaways

Learn thisSuperposition: overlapping waves or pulses add their displacements, with signs, then carry on unchanged.
Learn thisCoherent sources have the same frequency and a constant phase difference; a steady interference pattern needs them.
Learn thisΔϕ=Δxλ×2π\Delta\phi = \frac{\Delta x}{\lambda} \times 2\pi
In bookletFor sources in phase: constructive interference when path difference =nλ= n\lambda, destructive when path difference =(n+12)λ= \left(n + \tfrac{1}{2}\right)\lambda.
In booklets=λDds = \frac{\lambda D}{d}
Learn thisFringes spread out for larger λ\lambda or DD and smaller dd. White light gives a white central fringe with coloured fringes either side, each with violet nearest the centre and red furthest out.
Learn thisDark fringes do not destroy energy; it moves to the bright fringes.

Practise this

129 past-paper questions on Interference, diffraction, polarization and resolution in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Interference, diffraction, polarization and resolution →