1.13 · AHL · HL onlyPaper 1Paper 2

Rotational motion and moment of inertia

In a minute

A turning wheel is described by its , angular velocity and , which play the parts of , velocity and . When the angular acceleration is constant, four equations of motion predict the rotation. A resultant causes the angular acceleration, τ=Iα\tau = I\alpha, where the II depends on how the mass is spread about the axis.

You'll be able to

  • Describe a rotation using angular displacement, angular velocity and angular acceleration, with a sign for the sense of rotation.
  • Use the four equations for uniform angular acceleration, including for a wheel that rolls without slipping.
  • Explain how the moment of inertia of a body depends on how its mass is spread about the axis, and on which axis it turns about.
  • Calculate the moment of inertia of a system of point masses with I=∑mr2I = \sum mr^{2}, alone or added to a body whose II is given.
  • Apply τ=Iα\tau = I\alpha to a turning body, including a resistive torque and a wheel coupled to a hanging mass.
Before you start3 quick questions on what this builds on
Check yourself
A turntable turns at 300 revolutions per minute. What is its angular velocity, in rad s−1\pu{rad s-1}? Give 3 significant figures.
Check yourself
A 50 N\pu{50 N} acts on a spanner 0.30 m\pu{0.30 m} from the bolt, at 60∘60^{\circ} to the spanner. What is the about the bolt, in N m\pu{N m}? Give 2 significant figures.
Check yourself
A car moving at 4.0 m s−1\pu{4.0 m s-1} accelerates uniformly at 2.5 m s−2\pu{2.5 m s-2} for 6.0 s\pu{6.0 s}. What is its displacement, in metres? Give 2 significant figures.

Revise first: 1.1 Describing motion, 1.2 Equations of motion and motion graphs, 1.4 Newton's laws and free-body diagrams, 1.8 Circular motion, 1.11 Power, efficiency and energy density, 1.12 Torque and rotational equilibrium, 4.1 Gravitation: Kepler's laws and Newton's law and 6.2 Scalars and vectors

Angular displacement, velocity and acceleration

For a body moving in a line you used , , velocity and . A wheel spinning on its axle stays in one place, so you need a turning version of each.

Here a body is rigid: it keeps its shape as it turns. So every point on it turns through the same angle in the same time.

Draw a line on the body. Its angular position θ\theta is the angle between that line and a fixed reference direction, in . One full turn is 2π2\pi rad.

A disc turns about a fixed axis through its centre. A dashed horizontal line from the centre to the right is the fixed reference direction. A painted line on the disc starts at angle theta i, 30 degrees above the reference direction, and later sits at angle theta f, 110 degrees above it. A curved arrow between the two positions, turning anticlockwise, is labelled delta theta, the angular displacement. A curved arrow outside the disc, at the bottom right, shows that anticlockwise is taken as the positive sense. reference direction start later, θf θi Δθ anticlockwise = positive
The disc has turned anticlockwise, so with anticlockwise positive its angular displacement Δθ=θf−θi\Delta\theta = \theta_\text{f} - \theta_\text{i} is positive.

You won't need the vector treatment of rotation. Instead, choose one sense as positive, usually anticlockwise, and give each angular quantity a sign. Clockwise is then negative.

In 1.8 you met angular velocity, ω=ΔθΔt\omega = \frac{\Delta\theta}{\Delta t}, in rad s−1\pu{rad s-1}. Its size is the angular speed. When the body speeds up or slows down its turning, ω\omega changes.

If α\alpha has the same sign as ω\omega, the turning speeds up. If the signs are opposite, it slows down.

A point at distance rr from the axis moves along an arc. The radian is defined so that the arc length is s=rθs = r\theta. Dividing by time gives v=ωrv = \omega r, and in the same way its acceleration along the path is a=αra = \alpha r.

Learn this
s=rθv=ωra=αrs = r\theta \qquad v = \omega r \qquad a = \alpha r

These links matter most for a wheel that rolls without slipping. The ground touches each part of the rim in turn, so the axle moves forward one arc length for each angle turned: s=rθs = r\theta, v=ωrv = \omega r and a=αra = \alpha r for the axle.

For this forward motion, you treat the wheel's whole mass as if it sits at its , at the axle.

Worked exampleAn electric drill starts from rest and reaches 1800 revolutions per minute in 0.750 s\pu{0.750 s}. Calculate the average angular acceleration of the drill bit.

Try it first, then reveal one step at a time.

  1. Convert to rad s−1\pu{rad s-1}: ωf=1800×2π60=188.5 rad s−1\omega_\text{f} = \frac{1800 \times 2\pi}{60} = \pu{188.5 rad s-1}, and ωi=0\omega_\text{i} = 0.
Worked exampleA bicycle wheel of radius 0.34 m\pu{0.34 m} rolls without slipping along a straight road. The bicycle moves forward 12.0 m\pu{12.0 m}. Calculate the size of the angular displacement of the wheel.

Try it first, then reveal one step at a time.

  1. Rolling without slipping, so the distance moved equals the arc length turned: s=rθs = r\theta.
Check yourself
A wheel turns anticlockwise and is slowing down. Anticlockwise is positive. What are the signs of its angular velocity and angular acceleration?
Check yourself
A playground roundabout turns through 3.5 revolutions. What is its angular displacement, in radians? Give 2 significant figures.

Equations for uniform angular acceleration

In 1.2 you used four equations for . Swap each linear quantity for its angular partner and you get the rotational versions.

The swaps are: s→Δθs \to \Delta\theta, u→ωiu \to \omega_\text{i}, v→ωfv \to \omega_\text{f} and a→αa \to \alpha. Time tt stays the same.

In the formula booklet
Δθ=ωf+ωi2tωf=ωi+αt\Delta\theta = \frac{\omega_\text{f} + \omega_\text{i}}{2}t \qquad \omega_\text{f} = \omega_\text{i} + \alpha t
In the formula booklet
Δθ=ωit+12αt2ωf2=ωi2+2αΔθ\Delta\theta = \omega_\text{i}t + \frac{1}{2}\alpha t^{2} \qquad \omega_\text{f}^{2} = \omega_\text{i}^{2} + 2\alpha\Delta\theta

All four are in the data booklet. You need to choose the right one: list the five quantities, mark the one you want, and pick the equation that leaves out the one you don't know.

They hold only when α\alpha is constant. If the turning effect changes during the motion, α\alpha changes too, and the equations no longer apply.

Worked exampleA washing machine drum spins at 120 rad s−1\pu{120 rad s-1}. It slows down uniformly and stops in 8.0 s\pu{8.0 s}. Calculate the number of revolutions it makes while stopping.

Try it first, then reveal one step at a time.

  1. Take the drum's sense of rotation as positive: ωi=120 rad s−1\omega_\text{i} = \pu{120 rad s-1}, ωf=0\omega_\text{f} = 0, t=8.0 st = \pu{8.0 s}. You want Δθ\Delta\theta and don't need α\alpha.
Worked exampleA grinding wheel turns at 52 rad s−1\pu{52 rad s-1}. Its motor then gives it a constant angular acceleration of 6.5 rad s−2\pu{6.5 rad s-2} while it turns through 150 rad\pu{150 rad}. Determine its final angular velocity.

Try it first, then reveal one step at a time.

  1. Positive is the sense of rotation. Known: ωi=52\omega_\text{i} = 52, α=6.5\alpha = 6.5, Δθ=150\Delta\theta = 150. Not known and not wanted: tt.
Check yourself
A disc starts from rest with a constant angular acceleration of 4.0 rad s−2\pu{4.0 rad s-2}. Through what angle does it turn in the first 3.0 s\pu{3.0 s}?
Check yourself
A toy car starts from rest and accelerates uniformly across a floor. Its wheels, of radius 0.020 m\pu{0.020 m}, roll without slipping. After 1.5 s\pu{1.5 s} the car has moved 0.90 m\pu{0.90 m}. What is the angular acceleration of a wheel, in rad s−2\pu{rad s-2}? Give 2 significant figures.

Moment of inertia

Mass measures how hard it is to change a body's linear velocity. For turning, mass alone is not enough: where the mass sits also matters.

Hold a broom near its middle and twist it to and fro: it is easy. Now hold it at the end of the handle and swing it to and fro: it is much harder. Same broom, same mass, but more of the mass is now far from the axis.

In the formula booklet
I=∑mr2I = \sum mr^{2}

Each mass counts with r2r^{2}, so mass far from the axis counts for a lot. Double a mass's distance and its share of II becomes four times as big. A mass on the axis adds nothing.

An extended body, like a wheel, is many small pieces, so II depends on how its mass is spread about the axis. The same body has a different II about a different axis.

You won't have to derive II for a solid shape. The question gives you the expression, such as I=12MR2I = \frac{1}{2}MR^{2} for a uniform disc about its central axis.

Two copies of the same light rod, 0.80 m long, with a 0.60 kg mass at each end and a 0.20 kg mass at its centre. In the top copy, labelled a, a dashed axis perpendicular to the rod passes through the centre, so each end mass is 0.40 m from the axis and the centre mass is on the axis. In the bottom copy, labelled b, the dashed axis passes through the left end, so the centre mass is 0.40 m from the axis and the far end mass is 0.80 m from it. (a) axis through the centre 0.60 kg 0.60 kg 0.20 kg axis 0.40 m 0.40 m (b) axis through one end 0.60 kg 0.60 kg 0.20 kg axis 0.40 m 0.80 m
The same masses about two different axes. Measure each rr from the axis, not from the end of the rod.
Worked exampleA light rod 0.80 m\pu{0.80 m} long has a 0.60 kg\pu{0.60 kg} mass fixed at each end and a 0.20 kg\pu{0.20 kg} mass at its centre. Treat the masses as points. Calculate the moment of inertia about an axis through the centre, perpendicular to the rod.

Try it first, then reveal one step at a time.

  1. Each end mass is 0.40 m\pu{0.40 m} from the axis. The centre mass is on the axis, so r=0r = 0. The rod is light, so it adds nothing.
Worked exampleA thin ring and a uniform solid disc have the same mass and the same radius. Explain which has the greater moment of inertia about the axis through its centre, perpendicular to its face.

Try it first, then reveal one step at a time.

  1. The masses are equal, so the answer depends only on where the mass sits.
Check yourself
Two equal small masses sit on a light rod, the same distance either side of the axis. Both slide outwards to twice their distance from the axis. What happens to the moment of inertia?
Check yourself
A uniform turntable of mass 2.0 kg\pu{2.0 kg} and radius 0.30 m\pu{0.30 m} has I=12MR2I = \frac{1}{2}MR^{2} about its axis. A small 0.15 kg\pu{0.15 kg} weight is fixed on it, 0.25 m\pu{0.25 m} from the axis. What is the new moment of inertia, in kg m2\pu{kg m2}? Give 2 significant figures.

Newton's second law for rotation

says a resultant gives a mass an acceleration, F=maF = ma. For turning, a resultant gives a body an angular acceleration.

In the formula booklet
τ=Iα\tau = I\alpha

Here τ\tau is the resultant torque about the axis: add the torques with signs, anticlockwise positive. Each one is Frsin⁡θFr\sin\theta, as in 1.12. The angular acceleration has the same sense as the resultant torque.

If the torque changes during the motion, τ=Iα\tau = I\alpha links the average torque to the average angular acceleration over that time.

A resultant torque of zero gives α=0\alpha = 0. That is : the body stays at rest or keeps turning at a steady rate. No torque is needed to keep it turning.

Real axles have friction, which gives a resistive torque that always opposes the rotation. A motor must beat it to speed the wheel up.

The weight of a wheel acts at its centre of mass. On a wheel turning about its central axle that point is on the axis, so the weight has no lever arm and gives no torque.

Worked exampleA flywheel has moment of inertia 0.85 kg m2\pu{0.85 kg m2} about its axle. A motor applies a constant torque of 12 N m\pu{12 N m}, and friction at the axle gives a constant resistive torque of 1.5 N m\pu{1.5 N m}. The flywheel starts from rest. Calculate the time it takes to reach 60 rad s−1\pu{60 rad s-1}.

Try it first, then reveal one step at a time.

  1. Take the motor's sense as positive. Resultant torque: τ=12−1.5=10.5 N m\tau = 12 - 1.5 = \pu{10.5 N m}.

Often a turning body is coupled to one moving in a line, like a drum with a rope and a hanging load. Write one equation for each body, then link them.

A drum of radius r turns on a fixed horizontal axle at its centre. A rope is wound round the drum and leaves its right-hand edge, hanging straight down to a bucket. On the drum, the tension T acts straight down at the rim, where the rope leaves, a perpendicular distance r from the axle. A curved arrow labelled alpha shows the drum turning clockwise. On the bucket, the tension T acts straight up along the rope and the weight m g acts straight down, and the weight arrow is longer. An arrow labelled a beside the bucket shows its acceleration downwards. r α T T mg a
The same tension TT pulls up on the bucket and down on the rim of the drum.
Worked exampleA bucket of mass 4.0 kg\pu{4.0 kg} hangs from a light rope wound round a drum of radius 0.12 m\pu{0.12 m}. The drum has moment of inertia 0.090 kg m2\pu{0.090 kg m2} and turns on a frictionless axle. The bucket is released from rest. Determine the acceleration of the bucket.

Try it first, then reveal one step at a time.

  1. Bucket, down positive (the data booklet gives g=9.8 m s−2g = \pu{9.8 m s-2}): mg−T=mamg - T = ma.
Check yourself
A wheel is turning clockwise and a brake is applied, so the wheel slows down. What is the sense of the resultant torque on the wheel?
Check yourself
A playground roundabout with moment of inertia 240 kg m2\pu{240 kg m2} is turning at 1.5 rad s−1\pu{1.5 rad s-1}. It slows uniformly and stops in 6.0 s\pu{6.0 s}. What is the size of the resultant torque on it, in N m\pu{N m}? Give 2 significant figures.

Common mistakes

  • Using revolutions, revolutions per minute or degrees in the angular equations. Convert every angle to radians and every rate to rad s−1\pu{rad s-1} first.
  • Using the angular equations of motion when the torque, and so the angular acceleration, is not constant. Check that α\alpha is constant before you use them.
  • Measuring rr in I=∑mr2I = \sum mr^{2} from the end of the object instead of from the axis. rr is each mass's perpendicular distance from the axis of rotation.
  • Saying two bodies of equal mass must have the same moment of inertia. II depends on how the mass is distributed about the axis, not just on how much there is.
  • Leaving out a resistive torque, or setting a rope's tension equal to the hanging weight. Use the resultant torque, and write a separate equation for each coupled body.

Exam tips

  • "Calculate" with the angular equations: list Δθ\Delta\theta, ωi\omega_\text{i}, ωf\omega_\text{f}, α\alpha and tt, mark the unknown and the one you don't need, then write the equation before substituting.
  • "Explain" a difference in moment of inertia: say where the mass is relative to the axis ("more of its mass further from the axis"). "It is heavier" earns nothing when the masses are equal.
  • "Determine" for a wheel coupled to a hanging mass: write mg−T=mamg - T = ma, Tr=IαTr = I\alpha and a=αra = \alpha r as three separate lines. Each one can earn a method mark.
  • In Paper 1A, reason with ratios: II goes as r2r^{2}, and for the same torque α\alpha goes as 1I\frac{1}{I}.

Key takeaways

Learn thisAngular displacement Δθ\Delta\theta (rad), angular velocity ω=ΔθΔt\omega = \frac{\Delta\theta}{\Delta t} (rad s−1\pu{rad s-1}) and angular acceleration α=ΔωΔt\alpha = \frac{\Delta\omega}{\Delta t} (rad s−2\pu{rad s-2}). Choose a positive sense and give each a sign.
Learn thisRolling without slipping (for the axle), or a point at radius rr (along its path): s=rθs = r\theta, v=ωrv = \omega r, a=αra = \alpha r.
In bookletΔθ=ωf+ωi2tωf=ωi+αtΔθ=ωit+12αt2ωf2=ωi2+2αΔθ\Delta\theta = \frac{\omega_\text{f} + \omega_\text{i}}{2}t \qquad \omega_\text{f} = \omega_\text{i} + \alpha t \qquad \Delta\theta = \omega_\text{i}t + \frac{1}{2}\alpha t^{2} \qquad \omega_\text{f}^{2} = \omega_\text{i}^{2} + 2\alpha\Delta\theta
Learn thisThe four angular equations of motion hold only for constant angular acceleration. Work in radians and rad s−1\pu{rad s-1}, as v=ωrv = \omega r and τ=Iα\tau = I\alpha need them.
In bookletI=∑mr2τ=IαI = \sum mr^{2} \qquad \tau = I\alpha
Learn thisMoment of inertia depends on the mass and on how it is spread about the chosen axis: mass further from the axis gives a larger II. τ\tau in τ=Iα\tau = I\alpha is the resultant torque, including any resistive torque.

Practise this

42 past-paper questions on Rigid body and rotational mechanics in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Rigid body and rotational mechanics →