2.5 · SLPaper 1Paper 2

Emissivity, albedo and Earth's energy balance

In a minute

A planet's temperature settles where the power it absorbs from the Sun equals the power it radiates away. tells you how much sunlight is scattered back instead of absorbed, and tells you how well a surface radiates compared with a . Put them together with the and you can estimate the temperature of Earth or any other planet.

You'll be able to

  • Use to find the power radiated by a real surface, or its temperature, from σT4\sigma T^{4}.
  • Calculate an albedo from scattered and incident power, and explain why Earth's albedo changes with clouds, latitude and time of day.
  • State what the solar constant is, and explain why the mean arriving over a planet's surface is S4\frac{S}{4}.
  • Apply to estimate the equilibrium temperature of a planet from its albedo, emissivity and the incoming intensity.
  • Balance the energy exchanged between a planet's surface and its atmosphere, and explain why burning fossil fuels raises the surface temperature.
Before you start3 quick questions on what this builds on
Check yourself
A black body is at 400 K\pu{400 K}. Calculate the power it radiates per square metre of surface, in W m−2\text{W m}^{-2} to 3 significant figures.
Check yourself
A small lamp radiates 25 W\pu{25 W} equally in all directions. Calculate the intensity 2.0 m\pu{2.0 m} from it, in W m−2\text{W m}^{-2} to 2 significant figures.
Check yourself
A metal plate in sunlight absorbs energy at 45 W\pu{45 W} and loses energy at 32 W\pu{32 W}. What happens to its temperature?

Revise first: 1.9 Work and energy transfer, 2.2 Internal energy, phase changes and specific heats and 2.4 Thermal radiation and black bodies

Real surfaces and emissivity

In 2.4 you met the , the best possible emitter of . By the , each square metre of a black body radiates σT4\sigma T^{4} watts.

A real surface at the same temperature radiates less. A shiny metal plate radiates only a few per cent of the black-body value. Dull paint, skin and soil come much closer.

ee is a ratio of two powers per unit area, so it has no unit. It lies between 0 and 1, and e=1e = 1 only for a black body. The data booklet gives it in this form.

In the formula booklet
emissivity=power radiated per unit areaσT4\text{emissivity} = \frac{\text{power radiated per unit area}}{\sigma T^{4}}

Multiply both sides by σT4\sigma T^{4} and by the area AA. The total power radiated by a real surface is then P=eσAT4P = e\sigma A T^{4}. As always, TT is in kelvin.

Worked exampleOn a summer afternoon a dark roof tile is at 47 ∘C47\,^{\circ}\text{C} and radiates 415 W m−2\pu{415 W m-2}. Determine the emissivity of the tile, to 2 significant figures.

Try it first, then reveal one step at a time.

  1. Convert to kelvin: T=47+273=320 KT = 47 + 273 = \pu{320 K}.
Worked exampleA ceramic heating panel has a radiating area of 0.0600 m2\pu{0.0600 m2} and an emissivity of 0.8500.850. It radiates 265 W\pu{265 W}. Calculate its surface temperature.

Try it first, then reveal one step at a time.

  1. Start from P=eσAT4P = e\sigma A T^{4} and make TT the subject: T=PeσA4T = \sqrt[4]{\dfrac{P}{e\sigma A}}.
Check yourself
Human skin at 33 ∘C33\,^{\circ}\text{C} has an emissivity of about 0.970.97. Calculate the power radiated per square metre of skin, in W m−2\text{W m}^{-2} to 2 significant figures.
Check yourself
Which statement about the emissivity of a surface is correct?

Albedo

Fresh snow on a sunny day is dazzling, while a tarmac road beside it looks dark. The snow scatters most of the sunlight back. The road absorbs most of it, and gets much warmer.

, written α\alpha here, is also in the data booklet. Like emissivity, it is a ratio with no unit, between 0 and 1. "Scattered" includes reflection in every direction, not only mirror-like reflection.

In the formula booklet
albedo=total scattered powertotal incident power\text{albedo} = \frac{\text{total scattered power}}{\text{total incident power}}

For an opaque surface, or a planet as a whole, whatever is not scattered is absorbed. So it absorbs a fraction 1−α1 - \alpha of the incident power. Snow has an albedo of about 0.8, oceans about 0.06, and Earth as a whole about 0.3.

Albedo describes a large system on average. Earth's albedo is not fixed: it varies from day to day, mainly because cloud cover changes, and it depends on latitude.

Worked exampleSunlight of intensity 820 W m−2\pu{820 W m-2} falls on a snowfield, and 660 W m−2\pu{660 W m-2} is scattered back. Calculate the albedo of the snow, to 2 significant figures.

Try it first, then reveal one step at a time.

  1. Intensity is power per unit area, so for the same area the ratio of intensities equals the ratio of powers.
Worked exampleExplain why the albedo of Earth changes from day to day, and why it is higher near the poles than near the equator.

Try it first, then reveal one step at a time.

  1. Name what scatters sunlight strongly and say whether it changes from day to day.
Check yourself
A field of crops has an albedo of 0.240.24. What fraction of the incident solar power does it absorb?
Check yourself
Seen from a satellite, a region is 60%60\% forest of albedo 0.150.15 and 40%40\% cloud of albedo 0.700.70. The same intensity falls on every part. Calculate the albedo of the whole region, to 2 significant figures.

The solar constant and the factor of 4

Before you can balance a planet's energy, you need to know how much power arrives. Outside the atmosphere nothing absorbs the sunlight, so the there depends only on the Sun and the distance.

The data booklet gives the as S=1.36⋅103 W m−2S = \pu{1.36e3 W m-2}. It is the Sun's spread over a sphere of radius equal to the Earth–Sun distance, S=L4πd2S = \frac{L}{4\pi d^{2}}. Another planet has its own value of SS at its own distance.

The Sun is so far away that its rays arrive parallel. A planet of radius RR blocks them like a flat disc, so it intercepts the power falling on its projected area πR2\pi R^{2}. The power arriving is SπR2S\pi R^{2}.

Parallel sunlight falls on a sphere of radius R. The sphere blocks the rays over a disc of area pi R squared, shown as its shadow, while its whole surface has area 4 pi R squared. The left half is lit and the right half is the night side. R parallel rays of sunlight lit side night side surface area 4πR² shadow disc projected area πR²
The planet catches the sunlight falling on a disc of area πR2\pi R^{2}, but its whole surface, 4πR24\pi R^{2}, shares that power as it rotates.

As the planet rotates, that power is shared over its whole surface, 4πR24\pi R^{2}, night side included. The mean incoming intensity over the surface is therefore a quarter of SS.

Learn this
mean incoming intensity=SπR24πR2=S4\text{mean incoming intensity} = \frac{S \pi R^{2}}{4\pi R^{2}} = \frac{S}{4}

For Earth, S4=13604=340 W m−2\frac{S}{4} = \frac{1360}{4} = \pu{340 W m-2}. Part of this is scattered straight back, as set by the albedo.

Worked exampleExplain why the mean intensity of solar radiation arriving over the whole surface of a planet is S4\frac{S}{4}, where SS is the solar constant at the planet.

Try it first, then reveal one step at a time.

  1. Say what area catches the sunlight.
Worked exampleThe Sun's luminosity is 3.83⋅1026 W\pu{3.83e26 W} and Mars orbits at 2.28⋅1011 m\pu{2.28e11 m} from the Sun. Calculate the mean intensity of solar radiation arriving over the surface of Mars.

Try it first, then reveal one step at a time.

  1. Find the solar constant at Mars: S=L4πd2=3.83×10264π(2.28×1011)2=586.3 W m−2S = \dfrac{L}{4\pi d^{2}} = \dfrac{3.83 \times 10^{26}}{4\pi(2.28 \times 10^{11})^{2}} = \pu{586.3 W m-2}.
Check yourself
Earth's radius is 6.37⋅106 m\pu{6.37e6 m}. Using the solar constant from the data booklet, what is the total solar power arriving at Earth?
Check yourself
Venus is 0.720.72 times as far from the Sun as Earth. Calculate the solar constant at Venus, in W m−2\text{W m}^{-2} to 2 significant figures.

Energy balance and equilibrium temperature

Energy cannot be created or destroyed. This is . If a planet absorbs more power than it radiates, the difference stays in it as internal energy, and it warms up.

Warming makes it radiate more, because emission grows as T4T^{4}. The temperature keeps rising until the power out equals the power in. If it radiates more than it absorbs, it cools until the two match again. This steady state is the equilibrium temperature.

Write the balance per square metre of the planet's surface. In: the mean incoming intensity S4\frac{S}{4}, less the fraction α\alpha that is scattered. Out: eσT4e\sigma T^{4}.

Learn this
(1−α)S4=eσT4(1 - \alpha)\frac{S}{4} = e\sigma T^{4}

With no atmosphere, the surface usually radiates close to a black body, so take e=1e = 1 unless told otherwise. For Earth seen from space, the surface and atmosphere act together, with an effective emissivity well below 1.

Worked exampleAn airless planet has an albedo of 0.120.12, and the solar constant at its orbit is 590 W m−2\pu{590 W m-2}. Treating its surface as a black body, estimate its mean equilibrium temperature.

Try it first, then reveal one step at a time.

  1. Absorbed intensity, averaged over the surface: (1−0.12)×5904=129.8 W m−2(1 - 0.12) \times \dfrac{590}{4} = \pu{129.8 W m-2}.
Worked exampleThe solar constant at a rocky planet is 1.10⋅103 W m−2\pu{1.10e3 W m-2} and its albedo is 0.280.28. Its mean surface temperature is 281 K\pu{281 K}. Treating the planet and its atmosphere as one body at this temperature, determine the effective emissivity that keeps it in energy balance.

Try it first, then reveal one step at a time.

  1. Absorbed intensity: (1−0.28)×1.10×1034=198 W m−2(1 - 0.28) \times \dfrac{1.10 \times 10^{3}}{4} = \pu{198 W m-2}.
Check yourself
A small icy world with no atmosphere has an albedo of 0.670.67. The solar constant at its orbit is 50.3 W m−2\pu{50.3 W m-2}. Treating it as a black body, estimate its equilibrium temperature in kelvin, to 2 significant figures.
Check yourself
A planet's albedo and emissivity stay the same while the solar constant at its orbit doubles. By what factor does its equilibrium temperature change?

Surface and atmosphere

An airless planet is easy, but a real one has an atmosphere between the surface and space. Exam problems split the balance into two layers, the surface and the atmosphere, and apply conservation of energy to each.

Surface and atmosphere energy balance. Solar radiation comes down; part is scattered back to space and the rest is absorbed by the surface. The surface radiates infrared upwards; some escapes to space and the rest is absorbed by the atmosphere. The atmosphere radiates both up to space and down to the surface. space atmosphere surface incoming solar radiation scattered to space absorbed by surface infrared absorbed by atmosphere infrared escapes to space atmosphere radiates up atmosphere radiates down surface radiates infrared
In equilibrium, the power into each layer equals the power out of it.

The surface absorbs two things: the sunlight that reaches it, and the radiation sent back down by the atmosphere. It loses energy mainly by radiating upwards. Real surfaces also lose energy by and evaporation, but the simple model leaves these out.

Greenhouse gases in the atmosphere absorb much of the surface's infrared and re-radiate it in all directions, so part comes back down. You will see why they absorb it in 2.6. Burning fossil fuels adds carbon dioxide, a greenhouse gas, and is the main driver of the .

So, for the surface in equilibrium: absorbed solar intensity + intensity from the atmosphere = intensity the surface radiates.

Worked exampleIn a model of a planet, the surface absorbs a mean solar intensity of 172 W m−2\pu{172 W m-2}. The atmosphere radiates 221 W m−2\pu{221 W m-2} down to the surface. The surface has an emissivity of 0.950.95. Assuming it loses energy only by radiation, determine its equilibrium temperature.

Try it first, then reveal one step at a time.

  1. Total intensity absorbed by the surface: 172+221=393 W m−2172 + 221 = \pu{393 W m-2}.
Worked exampleBurning fossil fuels increases the concentration of carbon dioxide in the atmosphere. Explain, using the energy balance of the surface, why this raises the mean temperature of Earth's surface.

Try it first, then reveal one step at a time.

  1. Say what the extra carbon dioxide does to the surface's infrared radiation.
Check yourself
A planet's surface acts as a black body at 284 K\pu{284 K} and absorbs a mean solar intensity of 155 W m−2\pu{155 W m-2}. Assuming it loses energy only by radiation, calculate the intensity the atmosphere must radiate down to the surface for equilibrium, in W m−2\text{W m}^{-2} to 3 significant figures.
Check yourself
The concentration of greenhouse gases rises suddenly. Before the surface temperature has had time to change, which statement is correct?

Common mistakes

  • Using the full solar constant SS as the mean incoming intensity. Averaged over the whole surface it is S4\frac{S}{4}.
  • Using 4πR24\pi R^{2} for the area that catches sunlight. The intercepted power is SπR2S\pi R^{2}; 4πR24\pi R^{2} is the area that shares it.
  • Treating the albedo as the absorbed fraction. Albedo is the scattered fraction, so multiply the incoming intensity by 1−α1 - \alpha.
  • Mixing up albedo and emissivity. Albedo is about incoming radiation that is scattered; emissivity is about radiation the surface itself emits.
  • Giving a temperature in degrees Celsius when the working gave kelvin, or putting Celsius into T4T^{4}. Keep TT in kelvin and convert only if asked.
  • Writing that greenhouse gases "trap heat" or "reflect" infrared. They absorb infrared and re-radiate it in all directions.

Exam tips

  • Defining the solar constant (a one-line "state"): give the intensity of solar radiation at the top of Earth's atmosphere, at right angles to the rays. "Power per unit area" is fine for intensity.
  • In a Paper 2 energy-balance "determine" or "show that", show every step: S4\frac{S}{4}, then the absorbed intensity with (1−α)(1 - \alpha), then the balance and TT. The steps earn the marks, not just the final value.
  • Paper 1A energy-balance diagrams: apply conservation of energy to one layer at a time. What goes into the surface (or the atmosphere) must equal what comes out.
  • "Explain" a change in surface temperature: say what happens to the absorbed and emitted power, use conservation of energy, and end with the new equilibrium. Write "radiation" or "energy", not "heat".

Key takeaways

In bookletemissivity=power radiated per unit areaσT4\text{emissivity} = \frac{\text{power radiated per unit area}}{\sigma T^{4}}
In bookletalbedo=total scattered powertotal incident power\text{albedo} = \frac{\text{total scattered power}}{\text{total incident power}}
Learn thisEmissivity and albedo are ratios with no unit, each between 0 and 1. An opaque surface or a whole planet absorbs a fraction 1−α1 - \alpha of the incident power.
Learn thisEarth's albedo, about 0.3, varies daily with cloud cover and is higher at high latitude, where ice and snow cover the surface.
Learn thisThe mean incoming intensity over a planet's surface is S4\frac{S}{4}: power is caught by a disc of area πR2\pi R^{2} and shared over 4πR24\pi R^{2}. For Earth, S=1.36⋅103 W m−2S = \pu{1.36e3 W m-2} (data booklet).
Learn this(1−α)S4=eσT4(1 - \alpha)\frac{S}{4} = e\sigma T^{4}
Learn thisSurface in equilibrium, losing energy only by radiation: absorbed solar intensity + intensity radiated down by the atmosphere = intensity the surface radiates.

Practise this

27 past-paper questions on Greenhouse effect and climate-energy systems in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Greenhouse effect and climate-energy systems →