4.10 · AHL · HL onlyPaper 1Paper 2

Generators and alternating emf

In a minute

Turn a coil in a steady magnetic field and the through it keeps changing, so gives an that rises, falls and reverses like a sine wave. That is a . Turn it faster and the gets bigger as well as quicker.

You'll be able to

  • Explain why a coil turning in a uniform field produces a sinusoidal .
  • Link the coil's position to the flux and the : zero emf when the flux is largest, peak emf when the flux is zero.
  • Calculate the peak emf of a with ε0=NBAω\varepsilon_0 = NBA\omega.
  • Predict how the peak emf and the period change when the rotation frequency changes.
Before you start3 quick questions on what this builds on
Check yourself
A loop of area 40 cm2\pu{40 cm2} is in a uniform field of 0.20 T\pu{0.20 T}, with its normal at 60∘60^{\circ} to the field. What is the flux through it, in mWb? Give 2 significant figures.
Check yourself
A coil sits at rest in a strong, steady magnetic field. What emf is induced in it?
Check yourself
A wheel makes 5.0 revolutions per second. What is its angular velocity, in rad s−1\text{rad s}^{-1}? Give 2 significant figures.

Revise first: 1.8 Circular motion, 2.12 Current, potential difference and emf and 4.9 Magnetic flux, Faraday's law and Lenz's law

A coil turning in a field

In 4.9 you changed the by changing the field or moving a coil into it. Now keep the field steady and spin the coil instead. The angle keeps changing, so the flux keeps changing, so an is induced all the time.

Take a flat coil of NN turns, each of area AA. It turns at a steady angular velocity ω\omega in a uniform field BB, about an axis at right angles to the field. If it makes ff turns per second, ω=2πf\omega = 2\pi f.

Measure the angle θ\theta between the field and the normal to the coil, and start the clock when θ=0\theta = 0. Then θ=ωt\theta = \omega t, so the flux through each turn is Φ=BAcos⁡(ωt)\Phi = BA\cos(\omega t).

End-on view of a rectangular coil between the N and S poles of a magnet. The field points from N to S, left to right. The coil is seen edge-on as a line through the rotation axis, turning anticlockwise. Its normal makes an angle theta with the field. The two long sides move in circles; each velocity arrow also makes the angle theta with the field. NS B θ normal v v axis ω coil seen edge-on; long sides shown as dots
The normal and the velocity of each long side both make the angle θ=ωt\theta = \omega t with the field.

By , the is NN times the rate of change of flux. On a graph, that is NN times the gradient of the flux–time curve, with a minus sign. The flux is a cosine curve, so the emf is a sine curve.

Two positions matter most. When the plane of the coil is perpendicular to the field, the flux is at its largest but is not changing at that instant, so the emf is zero. When the plane is along the field, the flux is zero but changing fastest, so the emf is at its peak.

Two graphs against time for one turn of a coil in a uniform field. Top: flux linkage is a cosine curve, largest at time 0, zero at a quarter period, most negative at half a period, zero at three quarters and largest again after one period. Bottom: emf is a sine curve, zero at time 0, largest at a quarter period, zero at half a period, most negative at three quarters, zero after one period. Small drawings above show the coil edge-on: across the field at 0, half and one period; along the field at a quarter and three quarters. field flux linkage NΦ / Wb time t 0 emf ε / V time t 0 NBAε₀ T/4 T/2 3T/4 T
The emf is zero where the flux linkage peaks, and peaks where the flux linkage is zero.

You can also see the size of the emf from ε=BvL\varepsilon = BvL. Each long side, of length LL, moves in a circle of radius w2\frac{w}{2}, where ww is the coil's width. So its speed is v=ωw2v = \omega\frac{w}{2}.

Only the part of the velocity across the field induces an emf. The velocity makes the angle θ\theta with the field, so that part is vsin⁡θv\sin\theta. The two sides' emfs add round each turn, and the NN turns are in series.

Learn this
ε=NBAωsin⁡(ωt)\varepsilon = NBA\omega\sin(\omega t)

This comes from ε=2NBL(ωw2)sin⁡(ωt)\varepsilon = 2NBL\left(\omega\frac{w}{2}\right)\sin(\omega t) with A=LwA = Lw. The peak emf is ε0=NBAω\varepsilon_0 = NBA\omega. Faraday's law and ε=BvL\varepsilon = BvL are in section D.4 of the data booklet; this result is not, so remember it or derive it.

A generator does not make energy. When a current flows, means the magnetic forces on the induced current oppose the rotation. Whatever turns the coil (a turbine, a wind rotor, a bicycle wheel) must do work against that opposition.

Worked exampleA flat coil turns steadily in a uniform magnetic field. Explain why the induced emf is zero at the instant the coil's plane is perpendicular to the field, even though the flux through the coil is then at its maximum.

Try it first, then reveal one step at a time.

  1. Start with what the emf depends on: Faraday's law.
Worked exampleA generator coil has 250 turns, each 5.0 cm\pu{5.0 cm} by 3.0 cm\pu{3.0 cm}. It makes 40 revolutions per second in a uniform field of 0.12 T\pu{0.12 T}, about an axis at right angles to the field. Calculate the peak emf.

Try it first, then reveal one step at a time.

  1. Area of one turn in square metres: A=0.050×0.030=1.5⋅10−3 m2A = 0.050 \times 0.030 = \pu{1.5e-3 m2}.
Check yourself
A coil turns steadily in a uniform magnetic field. In which position is the induced emf largest?
Check yourself
A coil of 80 turns, each of area 25 cm2\pu{25 cm2}, makes 15 revolutions per second in a uniform field of 0.30 T\pu{0.30 T}, about an axis at right angles to the field. Calculate the peak emf, in V. Give 2 significant figures.

Turning the coil faster

Spin the coil faster and two things change. Each turn takes less time, so the emf repeats more often. The flux also goes through the same changes in less time, so it changes faster and the emf is bigger.

Graph of emf against time for the same generator at two speeds. The solid sine curve, at rotation frequency f, has peak emf epsilon nought and period T, completing two cycles. The dashed sine curve, at frequency 2f, has peak emf two epsilon nought and period T over 2, completing four cycles in the same time. emf ε / V time t ε₀ 2ε₀ 0 T/2 T frequency f frequency 2f
Doubling the rotation frequency doubles the peak emf and halves the period.

More turns, a stronger field or a bigger coil also raise the peak emf, because each appears in NBAωNBA\omega. Only a change of speed changes the period as well.

Worked exampleA small generator turns at 1500 revolutions per minute and gives a peak emf of 9.0 V\pu{9.0 V}. It slows to 1000 revolutions per minute. Calculate the new peak emf.

Try it first, then reveal one step at a time.

  1. Rotation frequencies: f1=150060=25 Hzf_1 = \frac{1500}{60} = \pu{25 Hz} and f2=100060=16.7 Hzf_2 = \frac{1000}{60} = \pu{16.7 Hz}.
Worked exampleThe rotation frequency of a generator coil is doubled. The coil and the field are unchanged. Explain the effect on the peak emf and on the period of the emf.

Try it first, then reveal one step at a time.

  1. The period is the time for one turn, so deal with that first.
Check yourself
A generator is made to turn three times as fast as before. What happens to the peak emf and to the period of the emf?
Check yourself
A generator gives a peak emf of 4.8 V\pu{4.8 V} when it turns at 20 Hz\pu{20 Hz}. At what rotation frequency, in Hz, would the peak emf be 7.2 V\pu{7.2 V}? Give 2 significant figures.

Common mistakes

  • Saying the emf peaks when the flux peaks. The emf follows the rate of change of flux, so it peaks when the flux is zero.
  • Changing only the period when a generator speeds up. The peak emf rises in the same ratio.
  • Using ff, or revolutions per minute, in ε0=NBAω\varepsilon_0 = NBA\omega. Convert to turns per second, then use ω=2πf\omega = 2\pi f in rad s−1\text{rad s}^{-1}.
  • Measuring θ\theta from the plane of the coil. With θ\theta from the normal, the flux is BAcos⁡θBA\cos\theta and the emf goes with sin⁡θ\sin\theta.
  • Saying a generator creates energy. It transfers the work done turning it into electrical energy, and Lenz's law makes it harder to turn when a current flows.

Exam tips

  • "Explain" why a turning coil has an emf: say there is flux linking this coil, that it changes as the coil turns, and that by Faraday's law the emf depends on its rate of change.
  • "Sketch" the emf–time graph: a sine curve with constant peak and a period equal to the time for one turn. Mark any values you are given.
  • When the speed changes, scale both the peak emf and the period by the same factor, in opposite directions.
  • "Determine" ω\omega from an emf–time graph: read the period TT from the time axis, then ω=2πT\omega = \frac{2\pi}{T}.

Key takeaways

Learn thisA coil turning at constant ω\omega in a uniform field has flux linkage NBAcos⁡(ωt)NBA\cos(\omega t) and a sinusoidal emf.
Learn thisε=NBAωsin⁡(ωt),ε0=NBAω\varepsilon = NBA\omega\sin(\omega t),\quad \varepsilon_0 = NBA\omega
Learn thisThe emf is zero when the coil's plane is perpendicular to the field (flux largest), and at its peak when the plane is along the field (flux zero).
Learn thisTurn the same coil in the same field kk times as fast: the peak emf is multiplied by kk and the period is divided by kk.

Practise this

87 past-paper questions on Electromagnetic induction and power systems in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Electromagnetic induction and power systems →