1.2 · SLPaper 1Paper 2

Equations of motion and motion graphs

Builds on 1.1 Describing motion21 min read

In a minute

When the is constant, four equations link , , acceleration and time, so you can predict where a body will be and how fast it will move. When the acceleration changes, those equations fail, and you work from graphs instead: give rates, and the gives the change.

You'll be able to

  • Choose and use the four equations of motion for in a straight line, with a stated positive direction.
  • Solve vertical motion problems with the , including bodies thrown up that turn round.
  • Tell uniform from , and say when the equations of motion apply.
  • Find velocity, acceleration and displacement from the gradients and areas of motion graphs, for straight and curved lines.
Before you start3 quick questions on what this builds on
Check yourself
On a graph of displacement against time, what does the gradient give?
Check yourself
A bus travels 1.8 km\pu{1.8 km} along a road in 4.0 min\pu{4.0 min}. What is its average , in m s−1\pu{m s-1}? Give 2 significant figures.
Check yourself
A trolley's velocity rises from 4.0 m s−1\pu{4.0 m s-1} to 10.0 m s−1\pu{10.0 m s-1} in 3.0 s\pu{3.0 s}. What is its average acceleration, in m s−2\pu{m s-2}? Give 2 significant figures.

Revise first: 1.1 Describing motion

The four equations of motion

A car pulls away from traffic lights, gaining the same speed every second. Because the change is steady, you can predict where it will be later.

For in a straight line, five quantities describe the motion. Their initials give the equations their nickname, suvat.

ss is the displacement, uu the initial velocity, vv the final velocity, aa the acceleration and tt the time taken. ss, uu, vv and aa are vectors along the line, so each has a sign.

Velocity against time graph for uniform acceleration. A straight line rises from velocity u on the vertical axis at time zero to velocity v at time t, and its gradient is labelled a. The area under the line, down to the time axis, is split into two parts. The lower part is a rectangle of height u and width t, labelled area u t. The upper part is a triangle of width t and height v minus u, which equals a t, labelled area one half a t squared. Together they make the displacement s. velocity / m s⁻¹ time t / s 0 u v t area = ut area = ½at² v − u = at gradient = a
With uniform acceleration the velocity–time graph is a straight line. Its gradient is aa, and the area under it is ss.

The gradient gives a=v−uta = \frac{v - u}{t}, so v=u+atv = u + at. The area under the line, a rectangle utut plus a triangle 12at2\tfrac{1}{2}at^{2}, gives s=ut+12at2s = ut + \tfrac{1}{2}at^{2}.

In the formula booklet
s=(u+v)t2v=u+ats=ut+12at2v2=u2+2ass = \frac{(u+v)t}{2} \qquad v = u + at \qquad s = ut + \tfrac{1}{2}at^{2} \qquad v^{2} = u^{2} + 2as

All four are in the data booklet. Choose the right one: each leaves out one of the five quantities.

1. Choose a positive direction and write it down.

2. List ss, uu, vv, aa and tt. Fill in the three you know, with signs and SI units.

3. Mark the one you want and the one you neither know nor want. Pick the equation without that second one.

4. Substitute, solve, then round the final answer only, and give its unit.

Worked exampleA tram starts from rest and accelerates uniformly to 18.0 m s−1\pu{18.0 m s-1} in 24.0 s\pu{24.0 s}. Calculate the it travels in this time.

Try it first, then reveal one step at a time.

  1. Take the direction of motion as positive. u=0u = 0, v=18.0 m s−1v = \pu{18.0 m s-1}, t=24.0 st = \pu{24.0 s}, s=?s = ? You don't need aa.
Worked exampleA driver is travelling at 24 m s−1\pu{24 m s-1} when she sees a hazard. Her reaction time is 0.60 s\pu{0.60 s}, during which the car keeps its speed. The brakes then give a uniform deceleration of 6.5 m s−2\pu{6.5 m s-2}. Determine the total distance from seeing the hazard to stopping.

Try it first, then reveal one step at a time.

  1. Take the direction of motion as positive. Split the motion: constant velocity, then uniform deceleration.
Check yourself
A body accelerates uniformly. You know uu, aa and ss, and you want vv. The time is not given. Which equation goes straight to the answer?
Check yourself
A ball rolls up a slope at 4.0 m s−1\pu{4.0 m s-1} and slows down uniformly at 1.6 m s−2\pu{1.6 m s-2}. How far up the slope does it travel before it stops for an instant? Answer in metres to 2 significant figures.

Vertical motion and free fall

On the Moon, a hammer and a feather dropped together land at the same moment. With no air in the way, every body falls with the same acceleration.

The value g=9.8 m s−2g = \pu{9.8 m s-2} is from the data booklet. Near the ground the is uniform, so the equations of motion apply.

Signs matter here. With up as positive, a=−9.8 m s−2a = \pu{-9.8 m s-2} the whole time: going up, at the top and coming down.

Worked exampleA ball is thrown vertically upwards at 12 m s−1\pu{12 m s-1}. Air resistance is negligible. Calculate the maximum height it reaches above the point of release.

Try it first, then reveal one step at a time.

  1. Take up as positive. u=12 m s−1u = \pu{12 m s-1}, a=−g=−9.8 m s−2a = -g = \pu{-9.8 m s-2}, and at the top v=0v = 0. You want ss; tt is not needed.
Worked exampleA stone is thrown vertically upwards at 8.0 m s−1\pu{8.0 m s-1} from the edge of a cliff. It then falls past the edge into the sea, 35 m\pu{35 m} below the point of release. Air resistance is negligible. Calculate the time from release until the stone hits the sea.

Try it first, then reveal one step at a time.

  1. Take up as positive. u=8.0 m s−1u = \pu{8.0 m s-1}, a=−9.8 m s−2a = \pu{-9.8 m s-2}, and the sea is below the start, so s=−35 ms = \pu{-35 m}. You want tt.
Check yourself
A ball is thrown vertically upwards. Air resistance is negligible. Which describes it at the highest point?
Check yourself
A phone slips from a hand and falls from rest through 1.4 m\pu{1.4 m} to the floor. Air resistance is negligible. At what speed does it hit the floor, in m s−1\pu{m s-1}? Give 2 significant figures.

Motion graphs: uniform and non-uniform acceleration

A sprinter's acceleration is largest at the start and fades near top speed. The equations of motion can't handle that; graphs can.

A body falling through air speeds up less and less as the air pushes back harder, so it has . The equations of motion assume constant aa, so they give wrong answers there.

Read motion graphs two ways. The gradient is a rate of change. The adds up the product of the two axis quantities.

Uniform, non-zero acceleration gives a straight velocity–time graph, a horizontal acceleration–time line and a parabolic displacement–time graph. Non-uniform acceleration curves the velocity–time graph.

Area below the time axis is negative displacement: motion in the negative direction. Add it with its sign for displacement, and its size for distance.

Velocity against time graph of a scooter journey. Velocity in metres per second on the vertical axis, time in seconds on the horizontal axis. The velocity rises in a straight line from zero at time 0 to 5.0 metres per second at 2.5 seconds, stays at 5.0 until 12.5 seconds, then falls in a straight line to zero at 17.5 seconds. The area under the graph is split into a triangle A from 0 to 2.5 seconds, a rectangle B from 2.5 to 12.5 seconds and a triangle C from 12.5 to 17.5 seconds. velocity v / m s⁻¹ time t / s 0 5.0 2.5 12.5 17.5 A B C
Split the area under a velocity–time graph into shapes you can measure.
Worked exampleThe graph shows the velocity of an electric scooter moving along a straight path. It accelerates uniformly from rest to 5.0 m s−1\pu{5.0 m s-1} in 2.5 s\pu{2.5 s}, moves at that velocity until t=12.5 st = \pu{12.5 s}, then slows uniformly and stops at t=17.5 st = \pu{17.5 s}. Determine its displacement in the 17.5 s\pu{17.5 s}.

Try it first, then reveal one step at a time.

  1. Displacement is the area under the velocity–time graph. Split it into the shapes A, B and C.
Velocity against time graph for non-uniform acceleration. The curve starts at the origin, rises steeply at first, and then becomes less and less steep as time goes on. At a point P on the curve a dashed straight line touches the curve: this tangent's gradient is the acceleration at that instant. The area under the curve is divided into thin vertical strips, each close to a trapezium, whose areas add up to the displacement. velocity v / m s⁻¹ time t / s 0 P tangent: gradient = a at P area of strips ≈ displacement
For a curve: the tangent's gradient gives the acceleration at an instant, and strips estimate the area.

For a curve, draw a tangent at the instant you want and find its with a large triangle. For the area, count grid squares or use thin trapezia.

Worked exampleThe velocity–time graph of a cyclist moving in a straight line is a curve. It gets less steep as time goes on. Explain why the equations of motion cannot be used to find the cyclist's displacement, and outline how the graph can be used instead.

Try it first, then reveal one step at a time.

  1. First mark: what the changing gradient means.
Check yourself
A body moves in a straight line. Its velocity–time graph is a rising curve that gets steeper as time goes on. Which describes its acceleration?
Check yourself
A trolley moves at +2.0 m s−1\pu{+2.0 m s-1} for 3.0 s\pu{3.0 s}, then at −1.0 m s−1\pu{-1.0 m s-1} for 4.0 s\pu{4.0 s}. What is its displacement after the 7.0 s\pu{7.0 s}?
Check yourself
A cart starts from rest. Its acceleration is 1.5 m s−2\pu{1.5 m s-2} for 4.0 s\pu{4.0 s}, then 0.50 m s−2\pu{0.50 m s-2} for the next 6.0 s\pu{6.0 s}, in the same direction. What is its speed at the end, in m s−1\pu{m s-1}? Give 2 significant figures.

Common mistakes

  • Using the equations of motion when the acceleration changes, such as a fall through air or a curved velocity–time graph. Check the acceleration is constant first.
  • Mixing signs: taking up as positive but writing a=+9.8 m s−2a = \pu{+9.8 m s-2}. Write the positive direction down and give every vector its sign.
  • Treating ss as distance when the body turns round. ss is the displacement from the start, so a ball that lands back in your hand has s=0s = 0.
  • Reading the gradient of a displacement–time graph as acceleration. It is velocity.

Exam tips

  • "Calculate": write the equation you chose, then the substitution with numbers. That line earns the method mark if the final answer slips.
  • "Determine" a gradient from a curve: draw a long tangent and use a large triangle. For an area, show the value of one square and the count.
  • "Sketch" a motion graph: label both axes, and show the key features: straight or curved, where it crosses zero, where it levels off.
  • In Paper 1A, with uniform acceleration from rest s=12at2s = \tfrac{1}{2}at^{2}, so doubling the time quadruples the displacement.

Key takeaways

In booklets=(u+v)t2v=u+ats=ut+12at2v2=u2+2ass = \frac{(u+v)t}{2} \qquad v = u + at \qquad s = ut + \tfrac{1}{2}at^{2} \qquad v^{2} = u^{2} + 2as
Learn thisThe equations of motion hold only while the acceleration is uniform. Use them along one line at a time, and split a journey into stages if aa changes. Each leaves out one of ss, uu, vv, aa, tt.
Learn thisState a positive direction first. Displacement, velocity and acceleration carry signs; up positive means a=−ga = -g.
Learn thisFree fall: g=9.8 m s−2g = \pu{9.8 m s-2} downwards (data booklet), the same for every body when air resistance is negligible. At the top of a vertical throw v=0v = 0 but a=ga = g.
Learn thisGradient of displacement–time = velocity; gradient of velocity–time = acceleration; area under velocity–time = displacement; area under acceleration–time = change in velocity.
Learn thisNon-uniform acceleration: curved velocity–time graph, no suvat. Use a tangent for the gradient, and squares or trapezia for the area.

Practise this

74 past-paper questions on Kinematics and motion in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Kinematics and motion →