1.8 · SLPaper 1Paper 2

Circular motion

In a minute

A body moving in a circle keeps changing direction, so its changes and it has an towards the centre, even at constant . A towards the centre, the centripetal , causes it. The , angular velocity and speed describe the motion.

You'll be able to

  • Describe circular motion using period, frequency and angular velocity, and use v=2πrT=ωrv = \frac{2\pi r}{T} = \omega r.
  • Explain why a body moving in a circle at constant speed is accelerating, and give the direction of its acceleration.
  • Calculate centripetal acceleration from the speed, the angular velocity or the period.
  • Identify the real forces that provide a centripetal force, and calculate the force needed.
  • Analyse the forces at the top and bottom of a vertical circle, where the speed changes.
Before you start3 quick questions on what this builds on
Check yourself
Convert 120∘120^{\circ} to . Give 3 significant figures.
Check yourself
A of 18 N\pu{18 N} acts on a 4.0 kg\pu{4.0 kg} trolley. What is its acceleration, in m s−2\pu{m s-2}? Give 2 significant figures.
Check yourself
A 12 kg\pu{12 kg} box rests on a level floor. The coefficient of static friction is 0.550.55. What is the largest friction force the floor can exert before the box slides, in newtons? Give 2 significant figures.

Revise first: 1.1 Describing motion, 1.2 Equations of motion and motion graphs, 1.4 Newton's laws and free-body diagrams, 1.5 Contact and field forces, 1.6 Momentum and impulse and 6.2 Scalars and vectors

Period, frequency and angular velocity

A point on a spinning wheel covers the same circle again and again. You describe it by how long each turn takes and how fast it turns.

The ff is the number of revolutions per second, measured in hertz (Hz). It is the reciprocal of the .

Learn this
T=1fT = \frac{1}{f}

Angles in circular motion are measured in . One full turn is 2π2\pi rad, and the data booklet gives 1 rad=180∘π\pu{1 rad} = \frac{180^{\circ}}{\pi}.

In one period the radius sweeps out 2π2\pi rad, so ω=2πT=2πf\omega = \frac{2\pi}{T} = 2\pi f. In that time the body travels one circumference, 2πr2\pi r.

In the formula booklet
v=2πrT=ωrv = \frac{2\pi r}{T} = \omega r

Every point on a turning rigid object has the same ω\omega. A point further from the axis has a larger speed, v=ωrv = \omega r.

Worked exampleA ceiling fan turns steadily, making one revolution every 0.40 s\pu{0.40 s}. The tip of each blade is 0.62 m\pu{0.62 m} from the axis. Calculate the speed of a blade tip.

Try it first, then reveal one step at a time.

  1. T=0.40 sT = \pu{0.40 s} and r=0.62 mr = \pu{0.62 m}.
Worked exampleA potter's wheel turns at a steady 75 revolutions per minute. Determine its angular velocity in rad s−1\pu{rad s-1}.

Try it first, then reveal one step at a time.

  1. Revolutions per second: f=7560=1.25 Hzf = \frac{75}{60} = \pu{1.25 Hz}.
Check yourself
Two children sit on a turning playground roundabout. Ana is 1.0 m\pu{1.0 m} from the centre and Ben is 2.0 m\pu{2.0 m} from the centre. Which statement is correct?
Check yourself
A bicycle wheel turns with an angular velocity of 12 rad s−1\pu{12 rad s-1}. What is its period, in seconds? Give 2 significant figures.

Centripetal acceleration

Drive round a roundabout at a steady . You still feel the car turning you, because your direction keeps changing.

is a vector, so a change of direction is a change of velocity, even at constant speed. A changing velocity means an .

A body moves clockwise round a circle at constant speed. At point A, at the top of the circle, the velocity v A is drawn along the tangent, pointing right. At point B, 60 degrees further round, its velocity arrow v B is the same length but points along the new tangent, down and to the right. Dashed radii join A and B to the centre. Halfway between A and B an arrow labelled a points from the body towards the centre of the circle. To the right, a vector diagram draws v A and v B from the same point; the arrow from the tip of v A to the tip of v B is the change in velocity, delta v, and it points in the same direction as the arrow towards the centre. centre A vA B vB a clockwise at constant speed vA vB Δv change in velocity Δv = vB − vA points towards the centre
The velocity keeps the same length but turns. The change in velocity, and so the acceleration, points towards the centre.
In the formula booklet
a=v2r=ω2r=4π2rT2a = \frac{v^{2}}{r} = \omega^{2}r = \frac{4\pi^{2}r}{T^{2}}

Pick the form that matches your data: speed, angular velocity or period. Double vv on the same circle and aa becomes four times bigger.

Its size is constant but its direction keeps turning, so it is not : don't use the equations of motion from 1.2.

Worked exampleA train travels round a curved section of track at a constant speed. Explain why the train is accelerating.

Try it first, then reveal one step at a time.

  1. Give one marking point per sentence: velocity is a vector; its direction changes; so velocity changes; acceleration is the rate of change of velocity, towards the centre.
Worked exampleThe Earth turns once every 24 hours. A point on the equator moves in a circle of radius 6.4⋅106 m\pu{6.4e6 m}. Calculate the centripetal acceleration of this point.

Try it first, then reveal one step at a time.

  1. You have rr and TT, so use a=4π2rT2a = \frac{4\pi^{2}r}{T^{2}}, with T=24×3600=86400 sT = 24 \times 3600 = \pu{86400 s}.
Check yourself
A puck on smooth ice is tied to a post by a string and slides round in a horizontal circle at constant speed. What is the direction of its acceleration?
Check yourself
A lettuce leaf is pressed against the wall of a salad spinner basket, 0.120 m\pu{0.120 m} from the axis. The basket turns at 45.0 rad s−1\pu{45.0 rad s-1}. What is the centripetal acceleration of the leaf, in m s−2\pu{m s-2}? Give 3 significant figures.

Centripetal force

By , an acceleration needs a in the same direction. So a body moving in a circle needs a resultant force towards the centre.

Learn this
F=mv2r=mω2rF = \frac{mv^{2}}{r} = m\omega^{2}r

Centripetal force is not a new kind of . It is a job done by real forces: in a string, friction on tyres, the from a wall, or gravity on a moon.

Free-body diagram of a car going round a flat, horizontal bend, seen from behind. The centre of the bend is to the left. Three arrows start at a dot at the car's centre: weight W pointing vertically down; normal force F N pointing vertically up, the same length as the weight; and friction F f pointing horizontally to the left, towards the centre of the bend. There is no separate centripetal force arrow: friction is the resultant force, and it points towards the centre. normal force FN weight W friction Ff to the centre of the bend
On a flat bend, friction from the road is the only horizontal force, so it provides the centripetal force.

On a , draw only the real forces. Never add an extra arrow labelled "centripetal force".

The centripetal force is perpendicular to the velocity, so it cannot change the speed. It only changes the direction, and does no .

The body's keeps its size but turns. If the force stopped, the body would move off along the tangent, not outwards along the radius.

On a banked track, part of the normal force points towards the centre. You only describe this; banked calculations are not required.

Worked exampleA car of mass 1350 kg\pu{1350 kg} drives round a flat, horizontal bend of radius 48 m\pu{48 m} at a constant 15 m s−1\pu{15 m s-1}. Determine the minimum coefficient of static friction between the tyres and the road for the car not to skid.

Try it first, then reveal one step at a time.

  1. Friction provides the centripetal force: Ff=mv2r=1350×15248=6328 NF_\text{f} = \frac{mv^{2}}{r} = \frac{1350 \times 15^{2}}{48} = \pu{6328 N}.
Worked exampleA ball on a string moves in a horizontal circle at constant speed. Explain why the centripetal force on the ball does not change its speed.

Try it first, then reveal one step at a time.

  1. Chain the marking points: force towards the centre; velocity along the tangent, so perpendicular; no work; speed constant, direction changes.
Check yourself
A coin sits on a horizontal turntable that turns at a steady rate. The coin moves round with the turntable without slipping. What provides the centripetal force on the coin?
Check yourself
A 0.25 kg\pu{0.25 kg} puck on a frictionless horizontal table is tied to a fixed peg by a string 0.60 m\pu{0.60 m} long. It moves round in a circle with a period of 0.80 s\pu{0.80 s}. What is the tension in the string, in newtons? Give 2 significant figures.

Vertical circles and changing speed

Swing a bag in a vertical circle and it slows near the top and speeds up near the bottom: its weight has a component along the path. This is non-uniform circular motion.

The force component towards the centre still equals mv2r\frac{mv^{2}}{r} for the speed at that instant. You only analyse the top and the bottom, where every force is vertical.

Draw the and take towards the centre as positive.

Then (forces towards the centre) minus (forces away from it) =mv2r= \frac{mv^{2}}{r}.

A small mass on a string moves in a vertical circle, shown dashed, around a fixed centre. At the top of the circle two arrows point straight down from the mass: a short arrow labelled tension F T and a longer arrow labelled weight mg; both point towards the centre, and the label reads F T plus mg equals m v squared over r. At the bottom of the circle a long arrow labelled tension F T points straight up towards the centre and a shorter arrow labelled weight mg points straight down; the label reads F T minus mg equals m v squared over r. The weight arrows are the same length. The tension arrow at the bottom is much longer than the tension arrow at the top. centre tension FT weight mg top: FT + mg = mv²/r tension FT weight mg bottom: FT − mg = mv²/r
At the bottom the must beat the weight; at the top the tension and the weight both point towards the centre.

Write the tension as FTF_\text{T}, since TT here is the period. At the bottom: FT−mg=mv2rF_\text{T} - mg = \frac{mv^{2}}{r}, so the tension is larger than the weight. At the top: FT+mg=mv2rF_\text{T} + mg = \frac{mv^{2}}{r}.

At the top, the minimum speed makes the tension zero, so the weight alone provides the centripetal force: mg=mv2rmg = \frac{mv^{2}}{r}, giving vmin=grv_\text{min} = \sqrt{gr}. Slower, and the string goes slack.

Speed can change on a horizontal circle too. Then the resultant force also has a component along the velocity, so it no longer points at the centre.

Worked exampleA child of mass 32 kg\pu{32 kg} sits on a swing. Her centre of mass is 2.4 m\pu{2.4 m} below the pivot. At the lowest point of the swing she moves at 4.5 m s−1\pu{4.5 m s-1}. Calculate the total tension in the two ropes at this point.

Try it first, then reveal one step at a time.

  1. Take up, towards the centre, as positive. Forces: total tension FTF_\text{T} up, weight mgmg down.
Worked exampleA roller-coaster car of mass 450 kg\pu{450 kg} goes round the inside of a vertical loop of radius 6.0 m\pu{6.0 m}. At the top of the loop it is upside down and moving at 11 m s−1\pu{11 m s-1}. Calculate the normal force that the track exerts on the car at the top.

Try it first, then reveal one step at a time.

  1. The centre is below, so take down as positive. Weight mgmg and the normal force FNF_\text{N} from the track both act down.
Check yourself
A stone on a string is whirled in a vertical circle. Where is the tension in the string greatest?
Check yourself
A bucket of water is swung in a vertical circle of radius 0.85 m\pu{0.85 m}. What is the minimum speed at the top for the water to stay in the bucket, in m s−1\pu{m s-1}? Give 2 significant figures.

Common mistakes

  • Saying a body at constant speed in a circle has no acceleration. Its velocity changes direction, so it accelerates towards the centre.
  • Adding a "centripetal force" arrow, or an outward force, to a free-body diagram. Draw only real forces.
  • Saying "towards the centre of the bowl" or just "inwards". Name the centre of the circle the body moves in.
  • Mixing signs in a vertical circle. With towards the centre positive, the weight is positive at the top, negative at the bottom.

Exam tips

  • "Explain" an acceleration at constant speed: velocity is a vector, its direction changes, so it accelerates, towards the centre. One point per sentence.
  • "Draw" forces with their usual names (weight, tension, normal force, friction). An extra force loses the mark.
  • In Paper 1A ratio questions, use a=v2ra = \frac{v^{2}}{r}: double vv at the same radius and aa and FF quadruple.
  • "Determine" a minimum speed or friction coefficient: state the limiting condition first (tension zero, or Ff=μsFNF_\text{f} = \mu_\text{s}F_\text{N}).

Key takeaways

Learn thisT=1fT = \frac{1}{f}, and the angular velocity is ω=2πT=2πf\omega = \frac{2\pi}{T} = 2\pi f, in rad s−1\pu{rad s-1}.
In bookletv=2πrT=ωrv = \frac{2\pi r}{T} = \omega r
Learn thisConstant speed in a circle is still acceleration: the direction of the velocity changes. The acceleration points towards the centre of the circle.
In bookleta=v2r=ω2r=4π2rT2a = \frac{v^{2}}{r} = \omega^{2}r = \frac{4\pi^{2}r}{T^{2}}
Learn thisCentripetal force F=mv2r=mω2rF = \frac{mv^{2}}{r} = m\omega^{2}r is provided by real forces: their resultant at constant speed, or its component towards the centre if the speed changes. It is perpendicular to the velocity, so it changes direction, not speed, and does no work.
Learn thisVertical circle on a string, towards the centre positive: bottom FT−mg=mv2rF_\text{T} - mg = \frac{mv^{2}}{r}; top FT+mg=mv2rF_\text{T} + mg = \frac{mv^{2}}{r}. Minimum speed at the top: gr\sqrt{gr}.

Practise this

124 past-paper questions on Circular motion and gravitation in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Circular motion and gravitation →