2.4 · SLPaper 1Paper 2

Thermal radiation and black bodies

In a minute

Every object gives off , and the hotter it is, the more it emits. For an ideal emitter, a , the gives the total radiated from its surface area and . How bright a star looks, and where its spectrum peaks, then tell you its power, temperature, size and distance.

You'll be able to

  • Calculate the of a black body from its surface area and absolute temperature, and work back from LL to TT or to the area.
  • Explain what is and why it depends on distance as well as on luminosity.
  • Use b=L4πd2b = \frac{L}{4\pi d^{2}} to find a brightness, luminosity or distance, with LL in watts or in solar luminosities.
  • Describe the spectrum of a black body and use to find a temperature from a peak wavelength.
  • Combine the three laws to find the temperature, size or distance of a star.
Before you start3 quick questions on what this builds on
Check yourself
Convert 57 ∘C57\,^{\circ}\text{C} to the .
Check yourself
A heater transfers 9.0 kJ\pu{9.0 kJ} of energy in 2.52.5 minutes. Calculate its output power in watts, to 2 significant figures.
Check yourself
Which mechanism of thermal energy transfer can carry energy across a vacuum?

Revise first: 1.11 Power, efficiency and energy density, 2.1 Particles, density and temperature and 2.3 Conduction and convection

Radiated power and the Stefan-Boltzmann law

Hold your hand near a hot iron without touching it and you feel warmth. That energy reaches you as electromagnetic waves, mostly infrared, emitted from the iron's surface. Every object above absolute zero emits this .

For a given kind of surface, two things set how much power it radiates: its area and its absolute temperature. A bigger surface emits more, and a hotter one emits far more.

No real object is a perfect black body, but stars come close, and so do many dull, dark surfaces. A real surface emits less than a black body at the same temperature. You will correct for this with a factor called emissivity in 2.5.

The total power a body radiates is its LL, measured in watts. For a black body it follows the .

In the formula booklet
L=σAT4L = \sigma A T^{4}

AA is the surface area in m2\text{m}^{2} and TT is the absolute in kelvin. σ=5.67⋅10−8 W m−2 K−4\sigma = \pu{5.67e-8 W m-2 K-4} is the Stefan-Boltzmann constant. The law and σ\sigma are both in the data booklet, and so are the light-year and Wien's constant used later. Values for the Sun are not in the booklet, so a question gives them.

The fourth power makes temperature matter hugely: double TT and LL rises 24=162^{4} = 16 times. For a sphere of radius rr, the radiating surface is the whole sphere, A=4πr2A = 4\pi r^{2}.

Worked exampleA dull black metal ball of radius 4.0 cm\pu{4.0 cm} is lifted out of a furnace at 900 ∘C900\,^{\circ}\text{C}. Treating it as a black body, calculate the power it radiates at that moment.

Try it first, then reveal one step at a time.

  1. Convert to SI units: r=0.040 mr = \pu{0.040 m} and T=900+273=1173 KT = 900 + 273 = \pu{1173 K}.
Worked exampleIn about 5 billion years the Sun will become a red giant. Its radius may grow to about 150 times today's value while its surface temperature falls from 5800 K\pu{5800 K} to 3200 K\pu{3200 K}. Estimate the red giant's luminosity as a multiple of the Sun's present luminosity L⊙L_\odot.

Try it first, then reveal one step at a time.

  1. Write the law for both stars, with A=4πR2A = 4\pi R^{2}, and divide. σ\sigma and 4π4\pi cancel: LL⊙=(RR⊙)2(TT⊙)4\dfrac{L}{L_\odot} = \left(\dfrac{R}{R_\odot}\right)^{2}\left(\dfrac{T}{T_\odot}\right)^{4}.
Check yourself
The absolute temperature of a black body doubles and its surface area stays the same. By what factor does its luminosity increase?
Check yourself
An electric hotplate has a radiating surface of area 0.025 m2\pu{0.025 m2} and radiates 650 W\pu{650 W}. Treating it as a black body, calculate its surface temperature in kelvin, to 2 significant figures.

Apparent brightness and the inverse square law

A torch is dazzling up close and faint from across a field, yet it emits the same power all the time. What changes is how much of that power reaches each square metre near you.

Picture a small source radiating equally in all directions. At distance dd, its power is spread over a sphere of area 4πd24\pi d^{2}. The power per unit area on a surface facing the source is the , in W m−2\text{W m}^{-2}.

bb is the intensity you receive from a star or other source. It links to the luminosity by this equation, which is in the data booklet.

In the formula booklet
b=L4πd2b = \frac{L}{4\pi d^{2}}

LL is in W and dd is in m. The equation assumes the source radiates equally in all directions and nothing absorbs the radiation on the way.

Inverse square law: the same cone of radiation from a point source covers one square at distance d, four equal squares at 2d and nine at 3d, so the brightness falls to one quarter and then one ninth source distance d area A distance 2d area 4A distance 3d area 9A brightness b b/4 b/9 the same power passes through each shaded area
Double the distance and the same power covers 4 times the area, so bb falls to a quarter.

For a source of fixed luminosity, b∝1d2b \propto \frac{1}{d^{2}}. This is an . You will meet the same pattern in gravitational and electric fields.

Astronomers measure bb with a detector on a telescope. If they also know dd, they can find LL, a property of the star itself. Luminosities are often given as multiples of the Sun's luminosity L⊙L_\odot, about 3.8⋅1026 W\pu{3.8e26 W}; a question gives you the value when you need it.

Worked exampleA small garden lamp emits 18 W\pu{18 W} of light equally in all directions. Calculate the intensity of its light 3.0 m\pu{3.0 m} away.

Try it first, then reveal one step at a time.

  1. The light spreads over a sphere of radius 3.0 m\pu{3.0 m}, of area 4π(3.0)2=113 m24\pi(3.0)^{2} = \pu{113 m2}.
Worked exampleA star is 25 light-years from Earth. Its apparent brightness at Earth is 2.8⋅10−8 W m−2\pu{2.8e-8 W m-2}. Determine its luminosity.

Try it first, then reveal one step at a time.

  1. Convert the distance with the data booklet's light-year: d=25×9.46×1015=2.365⋅1017 md = 25 \times 9.46 \times 10^{15} = \pu{2.365e17 m}.
Worked exampleStar P looks brighter than star Q in the night sky. A student concludes that P must have the greater luminosity. Explain why the student may be wrong.

Try it first, then reveal one step at a time.

  1. Separate what the star emits (LL) from what reaches Earth (bb).
Check yourself
The intensity of the light from a small lamp is 0.90 W m−2\pu{0.90 W m-2} at 1.5 m\pu{1.5 m}. Calculate the intensity at 4.5 m\pu{4.5 m}, in W m−2\text{W m}^{-2} to 2 significant figures.
Check yourself
Star X has 4 times the luminosity of star Y and is twice as far from Earth. What is bXbY\dfrac{b_\text{X}}{b_\text{Y}}?

The black-body spectrum and Wien's law

Heat an iron poker in a fire. First it glows dull red, then orange, then yellow-white. Its colour tells you its temperature, and the reason is the shape of its spectrum.

A black body emits a continuous range of wavelengths. Its , a graph of intensity against wavelength, is a smooth curve with a single peak. A hot, low-density gas is different: its atoms emit only certain wavelengths, giving a line spectrum.

Black-body spectra at 5000 K, 4500 K and 4000 K: intensity against wavelength. Each curve is continuous with one peak. The hotter the body, the higher the curve at every wavelength and the shorter the peak wavelength. visible 5000 K, peak 580 nm 4500 K, peak 644 nm 4000 K, peak 725 nm 0 400 800 1200 1600 wavelength / nm intensity (arbitrary units)
Hotter means higher at every wavelength, with the peak further left. The area under each curve is proportional to the power emitted per square metre.

Two things change as the temperature rises. The whole curve gets higher, so the area under it, and the total power, grows as T4T^{4}. And the peak moves to shorter wavelengths.

The peak wavelength λmax\lambda_\text{max} is inversely proportional to the absolute temperature. This is . It is in the data booklet.

In the formula booklet
λmaxT=2.9×10−3 m K\lambda_\text{max} T = 2.9 \times 10^{-3}\ \text{m K}

Put λmax\lambda_\text{max} in metres and TT in kelvin. A star's colour shows roughly where its peak is: cool stars look red, the Sun peaks near the middle of the visible range, and very hot stars look blue-white.

Worked exampleThe spectrum of a star peaks at a wavelength of 380 nm\pu{380 nm}. Determine the star's surface temperature.

Try it first, then reveal one step at a time.

  1. Convert the wavelength to metres: λmax=380×10−9 m\lambda_\text{max} = 380 \times 10^{-9}\ \text{m}.
Worked exampleA steel bar is heated from 900 K\pu{900 K} to 1800 K\pu{1800 K}. Outline how its emission spectrum changes, and explain why its glow changes from dull red to yellow-white.

Try it first, then reveal one step at a time.

  1. Describe the curve: its shape, its height and the position of its peak.
Check yourself
The absolute temperature of a black body is tripled. What happens to the wavelength at which its spectrum peaks?
Check yourself
Human skin has a surface temperature of about 34 ∘C34\,^{\circ}\text{C}. Calculate the peak wavelength of its thermal radiation, in micrometres to 2 significant figures.

Using the laws together

You can't put a thermometer on a star or measure its radius with a ruler. Astronomers combine the three laws instead, because each one links quantities they can measure to ones they can't.

1. Wien's law: the peak wavelength gives the surface temperature TT.

2. b=L4πd2b = \frac{L}{4\pi d^{2}}: the brightness and distance give the luminosity LL, or LL and bb give the distance dd.

3. L=σAT4L = \sigma A T^{4} with A=4πR2A = 4\pi R^{2}: LL and TT give the radius RR, or RR and TT give LL.

Worked exampleA star has a luminosity of 2.4⋅1027 W\pu{2.4e27 W} and its spectrum peaks at 340 nm\pu{340 nm}. Determine the radius of the star.

Try it first, then reveal one step at a time.

  1. Temperature from Wien's law: T=2.9×10−3340×10−9=8529 KT = \dfrac{2.9 \times 10^{-3}}{340 \times 10^{-9}} = \pu{8529 K}.
Worked exampleA white dwarf has a radius of 6.0⋅106 m\pu{6.0e6 m} and a surface temperature of 12000 K\pu{12000 K}. Its apparent brightness at Earth is 4.5⋅10−13 W m−2\pu{4.5e-13 W m-2}. Determine its distance from Earth in light-years.

Try it first, then reveal one step at a time.

  1. Luminosity: L=σ(4πR2)T4=(5.67×10−8)×4π(6.0×106)2×(12 000)4=5.32⋅1023 WL = \sigma (4\pi R^{2}) T^{4} = (5.67 \times 10^{-8}) \times 4\pi(6.0 \times 10^{6})^{2} \times (12\,000)^{4} = \pu{5.32e23 W}.
Check yourself
Stars A and B have the same radius. The spectrum of A peaks at 450 nm\pu{450 nm} and that of B at 900 nm\pu{900 nm}. What is LALB\dfrac{L_\text{A}}{L_\text{B}}?
Check yourself
A star has a luminosity of 0.40 L⊙0.40\,L_\odot and a surface temperature of 4500 K\pu{4500 K}. The Sun's surface temperature is 5800 K\pu{5800 K}. Calculate the star's radius as a multiple of the Sun's radius, to 2 significant figures.

Common mistakes

  • Using degrees Celsius in L=σAT4L = \sigma A T^{4} or in Wien's law. Convert to kelvin first by adding 273.
  • Using πr2\pi r^{2} for the radiating area of a star or ball. A sphere radiates from its whole surface, 4πr24\pi r^{2}.
  • Forgetting to square the distance in b=L4πd2b = \frac{L}{4\pi d^{2}}, or leaving dd in light-years. Convert to metres, then square.
  • Leaving λmax\lambda_\text{max} in nanometres in Wien's law. Multiply by 10−910^{-9} first, or TT comes out a billion times too small.
  • Mixing up luminosity and apparent brightness. LL, in W, belongs to the source; bb, in W m−2\text{W m}^{-2}, also depends on where you are.
  • Applying the fourth power to the peak wavelength. Only the power goes as T4T^{4}; λmax\lambda_\text{max} goes as 1T\frac{1}{T}.

Exam tips

  • "Calculate" or "determine": write the equation, substitute, then give the answer with its unit, to the significant figures of the least precise datum (usually 2 or 3).
  • Paper 1A ratio questions (a radius doubled, a temperature halved): divide the two equations so the constants cancel, then apply each power, R2R^{2} and T4T^{4} for luminosity and 1d2\frac{1}{d^{2}} for brightness.
  • "Explain" why a star that looks brighter need not be more luminous: say that bb depends on both LL and dd, and name the inverse square law. Put each point in its own sentence.
  • "State" Wien's law in one precise sentence: the peak wavelength of a black body's spectrum is inversely proportional to its absolute temperature.

Key takeaways

In bookletL=σAT4L = \sigma A T^{4}
In bookletb=L4πd2b = \frac{L}{4\pi d^{2}}
In bookletλmaxT=2.9×10−3 m K\lambda_\text{max} T = 2.9 \times 10^{-3}\ \text{m K}
Learn thisUse absolute temperature in every radiation law: TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.
Learn thisA spherical black body of radius RR has A=4πR2A = 4\pi R^{2}, so L=4πR2σT4L = 4\pi R^{2}\sigma T^{4}.
Learn thisA black body emits a continuous spectrum. Hotter means more intensity at every wavelength and a shorter peak wavelength.
Learn thisFor a source radiating equally in all directions, with no absorption on the way, brightness falls as 1d2\frac{1}{d^{2}}: double the distance and the brightness falls to a quarter.

Practise this

86 past-paper questions on Thermal concepts and energy transfer in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Thermal concepts and energy transfer →