1.14 · AHL · HL onlyPaper 1Paper 2

Angular momentum and rotational kinetic energy

In a minute

A spinning body has , L=IωL = I\omega. With no resultant external it stays constant, so a spinning body that pulls its mass towards the axis speeds up. Spinning also stores , 12Iω2\frac{1}{2}I\omega^{2}.

You'll be able to

  • Calculate the angular momentum of a rotating body with L=IωL = I\omega.
  • Use ΔL=τΔt=Δ(Iω)\Delta L = \tau\Delta t = \Delta(I\omega), including the area under a torque–time graph.
  • Apply when a body changes shape or two bodies start turning together.
  • Calculate rotational kinetic energy with 12Iω2\frac{1}{2}I\omega^{2} or L22I\frac{L^{2}}{2I}, including for a body rolling without slipping.
  • Explain why can change while angular momentum stays constant.
Before you start3 quick questions on what this builds on
Check yourself
A constant resultant of 30 N\pu{30 N} acts on a trolley for 0.40 s\pu{0.40 s}. What is the change in the trolley's , in N s?
Check yourself
Two small 0.50 kg\pu{0.50 kg} masses sit on a light rod, each 0.20 m\pu{0.20 m} from the axis of rotation. Calculate the of the pair about that axis, in kg m². Give 2 significant figures.
Check yourself
A 0.20 kg\pu{0.20 kg} ball moves at 6.0 m s−1\pu{6.0 m s-1}. Calculate its , in J. Give 2 significant figures.

Revise first: 1.6 Momentum and impulse, 1.10 Mechanical energy, 1.12 Torque and rotational equilibrium and 1.13 Rotational motion and moment of inertia

Angular momentum

A heavy spinning wheel is hard to stop, as a heavy moving trolley is. For the trolley, this is measured by linear momentum, p=mvp = mv.

For rotation, swap each linear quantity for its turning partner. Mass mm becomes moment of inertia II, and speed vv becomes angular speed ω\omega. The product is angular momentum.

In the formula booklet
L=IωL = I\omega

This equation, and the others in this lesson, are in section A.4 of the data booklet. ω\omega must be in rad s−1\text{rad s}^{-1}: one revolution is 2π2\pi rad.

You don't need its vector direction, but give its sense (clockwise or anticlockwise) when bodies turn opposite ways.

Worked exampleA potter's wheel has a moment of inertia of 0.85 kg m2\pu{0.85 kg m2} about its axle. It turns at 2.4 revolutions per second. Calculate its angular momentum.

Try it first, then reveal one step at a time.

  1. Convert to rad s⁻¹. Each revolution is 2π2\pi rad, so ω=2π×2.4=15.08 rad s−1\omega = 2\pi \times 2.4 = 15.08\ \text{rad s}^{-1}.
Worked exampleTwo small 0.30 kg\pu{0.30 kg} masses are fixed to a light rod, one on each side of the axis and each 0.45 m\pu{0.45 m} from it. The rod turns at 6.0 rad s−1\pu{6.0 rad s-1}. Calculate the angular momentum of the system.

Try it first, then reveal one step at a time.

  1. Moment of inertia: the rod is light, so only the masses count. I=∑mr2=2×0.30×0.452=0.1215 kg m2I = \sum mr^{2} = 2 \times 0.30 \times 0.45^{2} = \pu{0.1215 kg m2}.
Check yourself
A thin ring and a uniform disc have the same mass and radius. Both spin about their central axes at the same angular speed. Which has the larger angular momentum?
Check yourself
A bicycle wheel with moment of inertia 0.12 kg m2\pu{0.12 kg m2} spins at 25 rad s−1\pu{25 rad s-1}. Calculate its angular momentum, in kg m² s⁻¹. Give 2 significant figures.

Angular impulse

A force acting for a time gives a body an , FΔtF\Delta t, which equals its change in linear momentum. Turning works the same way: a resultant torque acting for a time changes the angular momentum.

In the formula booklet
ΔL=τΔt=Δ(Iω)\Delta L = \tau\Delta t = \Delta(I\omega)

Angular impulse has the unit N m s, which is the same as kg m2 s−1\text{kg m}^{2}\ \text{s}^{-1}. Rearranged, τ=ΔLΔt\tau = \frac{\Delta L}{\Delta t}: the resultant torque is the rate of change of angular momentum.

Signs matter here. Take the direction of rotation as positive. A torque that slows the body is then negative, and so is its angular impulse.

Worked exampleA grinding wheel with moment of inertia 0.024 kg m2\pu{0.024 kg m2} starts from rest. Its motor applies a constant resultant torque of 0.65 N m\pu{0.65 N m} for 2.5 s\pu{2.5 s}. Calculate the wheel's final angular speed.

Try it first, then reveal one step at a time.

  1. Angular impulse: τΔt=0.65×2.5=1.625 N m s\tau\Delta t = 0.65 \times 2.5 = \pu{1.625 N m s}.

When the resultant torque varies, the area under a torque–time graph is the angular impulse, just as the area under a force–time graph is the impulse.

Graph of resultant torque in newton metres against time in seconds for a rotor. The torque rises in a straight line from zero at time zero to 4.0 newton metres at 0.50 seconds, stays at 4.0 newton metres until 1.50 seconds, then falls in a straight line to zero at 2.00 seconds. The shaded area under the graph is labelled angular impulse. time t / s torque τ / N m 0 2.0 4.0 0.50 1.00 1.50 2.00 area = angular impulse
The area under a torque–time graph is the angular impulse, ΔL\Delta L.
Worked exampleA rotor with moment of inertia 0.15 kg m2\pu{0.15 kg m2} is spinning at 12 rad s−1\pu{12 rad s-1}. A motor then applies the resultant torque in the figure, in the direction of rotation. Determine the rotor's angular speed at t=2.00 st = \pu{2.00 s}.

Try it first, then reveal one step at a time.

  1. Split the area into two triangles and a rectangle: 12×0.50×4.0+1.00×4.0+12×0.50×4.0=6.0 N m s\frac{1}{2} \times 0.50 \times 4.0 + 1.00 \times 4.0 + \frac{1}{2} \times 0.50 \times 4.0 = \pu{6.0 N m s}.
Check yourself
What does the area under a graph of resultant torque against time give?
Check yourself
A wheel with moment of inertia 0.40 kg m2\pu{0.40 kg m2} slows from 30 rad s−1\pu{30 rad s-1} to 18 rad s−1\pu{18 rad s-1} in 4.0 s\pu{4.0 s}. Taking the direction of rotation as positive, calculate the average resultant torque, in N m. Give 2 significant figures.

Conservation of angular momentum

If no resultant torque acts, τΔt=0\tau\Delta t = 0, so ΔL=0\Delta L = 0. The angular momentum can't change.

Torques between parts of the system are internal. They come in equal and opposite pairs, so they move angular momentum from one part to another without changing the total.

A force through the axis has no torque about it. A force parallel to the axis, like the weight of a body turning about a vertical axis, has none either.

Two views from above of a student on a stool that turns freely about a vertical axis through its centre. On the left she holds a dumbbell in each hand with her arms stretched out, so the dumbbells are far from the axis; a short curved arrow shows slow anticlockwise rotation, labelled I large, omega small. On the right she has pulled the dumbbells in to her chest, close to the axis; a longer curved arrow shows faster anticlockwise rotation, labelled I small, omega large. Between the panels a note reads L equals I omega, the same in both. arms out I large, ω small L = Iω the same arms in I small, ω large
Pulling mass towards the axis lowers II, so ω\omega rises and L=IωL = I\omega stays the same.
Worked exampleA student sits on a stool that turns freely about a vertical axis. With dumbbells held at arm's length, her moment of inertia (with the stool) is 3.6 kg m2\pu{3.6 kg m2} and she turns at 2.0 rad s−1\pu{2.0 rad s-1}. She pulls the dumbbells in, and her moment of inertia falls to 1.5 kg m2\pu{1.5 kg m2}. Calculate her new angular speed.

Try it first, then reveal one step at a time.

  1. The stool turns freely, so there is no resultant external torque about the axis. Angular momentum is conserved.
Worked exampleExplain why the student's angular speed increases when she pulls the dumbbells in.

Try it first, then reveal one step at a time.

  1. Say why angular momentum is conserved.

Conservation also links coupled bodies. When two bodies on the same axis grip each other, friction between them is internal. Each body's angular momentum changes, but their total does not.

Worked exampleA turntable with moment of inertia 0.020 kg m2\pu{0.020 kg m2} spins freely at 3.5 rad s−1\pu{3.5 rad s-1}. A ring with moment of inertia 0.0060 kg m2\pu{0.0060 kg m2}, not rotating, is dropped centrally onto it. Friction between them soon makes them turn together. Calculate their final angular speed.

Try it first, then reveal one step at a time.

  1. The turntable spins freely and the friction between ring and turntable is internal, so the total angular momentum is conserved.
Check yourself
A playground roundabout spins freely. A child, standing still on the ground, steps straight onto its edge. What happens to the roundabout's angular speed?
Check yourself
A diver leaves the board turning at 1.8 rad s−1\pu{1.8 rad s-1}, with a moment of inertia of 9.0 kg m2\pu{9.0 kg m2} about her centre of mass. In the air she tucks, and it falls to 3.6 kg m2\pu{3.6 kg m2}. Calculate her new angular speed, in rad s⁻¹. Give 2 significant figures.

Rotational kinetic energy

A spinning flywheel can stay in one place, yet every part of it is moving. So it has kinetic energy, stored in its rotation.

In the formula booklet
Ek=12Iω2=L22IE_\text{k} = \frac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}

Why 12Iω2\frac{1}{2}I\omega^{2}? A small mass mm at distance rr moves at v=ωrv = \omega r, so its energy is 12mr2ω2\frac{1}{2}mr^{2}\omega^{2}. Adding these over the body gives 12(∑mr2)ω2=12Iω2\frac{1}{2}(\sum mr^{2})\omega^{2} = \frac{1}{2}I\omega^{2}.

The second form comes from putting ω=LI\omega = \frac{L}{I} into the first. Use it when you know LL.

Worked exampleA roundabout has a moment of inertia of 240 kg m2\pu{240 kg m2} and turns at 1.50 rad s−1\pu{1.50 rad s-1}. Calculate its rotational kinetic energy.

Try it first, then reveal one step at a time.

  1. Ek=12Iω2=12×240×1.502=270 JE_\text{k} = \frac{1}{2}I\omega^{2} = \frac{1}{2} \times 240 \times 1.50^{2} = \pu{270 J}, to 3 significant figures.

Angular momentum can be conserved while kinetic energy is not. Look again at the student on the stool.

Worked exampleFor the student on the stool, II fell from 3.6 kg m2\pu{3.6 kg m2} to 1.5 kg m2\pu{1.5 kg m2} while LL stayed at 7.2 kg m2 s−17.2\ \text{kg m}^{2}\ \text{s}^{-1}. Determine the change in her rotational kinetic energy.

Try it first, then reveal one step at a time.

  1. Before: Ek=L22I=7.222×3.6=7.2 JE_\text{k} = \frac{L^{2}}{2I} = \frac{7.2^{2}}{2 \times 3.6} = \pu{7.2 J}.

Coupled bodies go the other way. When the ring grips the turntable, friction turns some kinetic energy into internal energy, as in an inelastic collision.

A rolling wheel both moves along and spins. Rolling without slipping means the contact point does not slide, so v=ωRv = \omega R, where vv is the speed of the centre and RR the radius.

Worked exampleA uniform solid cylinder, 1.8 kg\pu{1.8 kg} and 0.050 m\pu{0.050 m} in radius, starts at rest at the top of a ramp. It rolls down without slipping, through a vertical drop of 0.60 m\pu{0.60 m}. Its moment of inertia is 12MR2\frac{1}{2}MR^{2}. Determine its speed at the bottom.

Try it first, then reveal one step at a time.

  1. The contact point does not slide, so friction does no work. With air resistance negligible, the lost gravitational potential energy all becomes kinetic energy.
Check yourself
The angular speed of a flywheel doubles. What happens to its rotational kinetic energy?
Check yourself
A turntable (I=0.020 kg m2I = \pu{0.020 kg m2}) spinning at 3.5 rad s−1\pu{3.5 rad s-1} is joined by a non-rotating ring (I=0.0060 kg m2I = \pu{0.0060 kg m2}), and they end up turning together at the same angular speed. Calculate the kinetic energy lost, in J. Give 2 significant figures.

Common mistakes

  • Claiming angular momentum is conserved without saying why. State that no resultant external torque acts on the system.
  • Assuming kinetic energy is conserved because angular momentum is. Work out EkE_\text{k} before and after, each with its own II.
  • Leaving ω\omega in revolutions per second or per minute. Convert to rad s−1\text{rad s}^{-1} before using L=IωL = I\omega or 12Iω2\frac{1}{2}I\omega^{2}.
  • Forgetting the rotational energy of a rolling body. Its total kinetic energy is 12mv2+12Iω2\frac{1}{2}mv^{2} + \frac{1}{2}I\omega^{2}.
  • Reading the area under a torque–time graph as a change in angular speed. It is ΔL\Delta L; divide by II.

Exam tips

  • "Explain" a change in angular speed with three points: no resultant external torque, so LL is constant; why II changes; so ω\omega changes inversely.
  • In "determine" questions, write the conservation equation I1ω1=I2ω2I_{1}\omega_{1} = I_{2}\omega_{2} before substituting. Give ω\omega in rad s−1\text{rad s}^{-1} and LL in kg m2 s−1\text{kg m}^{2}\ \text{s}^{-1}.
  • In Paper 1A ratio questions, pick the form that holds one quantity fixed: L22I\frac{L^{2}}{2I} when LL is the same, 12Iω2\frac{1}{2}I\omega^{2} when ω\omega is.
  • In "show that" rolling questions, write the energy equation with both kinetic terms, substitute ω=vR\omega = \frac{v}{R}, and give one more significant figure than the stated value.

Key takeaways

In bookletL=IωL = I\omega
In bookletΔL=τΔt=Δ(Iω)\Delta L = \tau\Delta t = \Delta(I\omega)
In bookletEk=12Iω2=L22IE_\text{k} = \frac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}
Learn thisWith no resultant external torque, angular momentum is conserved: I1ω1=I2ω2I_{1}\omega_{1} = I_{2}\omega_{2}. Lower II means higher ω\omega.
Learn thisThe area under a resultant torque–time graph is the angular impulse, ΔL\Delta L. Units: N m s = kg m2 s−1\text{kg m}^{2}\ \text{s}^{-1}; ω\omega in rad s−1\text{rad s}^{-1}.
Learn thisConserved LL does not mean conserved kinetic energy: pulling mass inwards raises EkE_\text{k}; coupling two bodies that turn at different rates lowers it.
Learn thisRolling without slipping: v=ωRv = \omega R, and total Ek=12mv2+12Iω2E_\text{k} = \frac{1}{2}mv^{2} + \frac{1}{2}I\omega^{2}.

Practise this

42 past-paper questions on Rigid body and rotational mechanics in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Rigid body and rotational mechanics →