2.2 · SLPaper 1Paper 2

Internal energy, phase changes and specific heats

In a minute

Every substance stores in its particles as . Energy flows from higher to lower by , and a of a pure substance happens at constant temperature. and let you calculate the energy to warm, melt or boil anything.

You'll be able to

  • Describe internal energy in terms of particles, and tell it apart from temperature.
  • Use a temperature difference to predict which way energy flows, and say when bodies reach .
  • Explain why a phase change happens at constant temperature, using melting, freezing, boiling, condensing and evaporation correctly.
  • Calculate with Q=mcΔTQ = mc\Delta T and Q=mLQ = mL, including mixing and heating in stages.
Before you start3 quick questions on what this builds on
Check yourself
A 650 W\pu{650 W} heater runs for 2.0 minutes. Calculate the energy transferred, in kJ to 2 significant figures.
Check yourself
A is at 350 K\pu{350 K} on the . What is its temperature in degrees Celsius?
Check yourself
What does the kelvin temperature of a substance measure?

Revise first: 1.9 Work and energy transfer, 1.11 Power, efficiency and energy density and 2.1 Particles, density and temperature

Internal energy

Recall from 2.1 that particles never stop moving.

Particle models of a solid, a liquid and a gas. Solid: particles in a regular grid, touching, vibrating about fixed positions. Liquid: particles close together but irregular, filling the bottom of the container. Gas: a few particles far apart, each moving in a different direction. solid fixed positions, vibrate liquid close, slide past each other gas far apart, move freely
The same particles, with different spacing and freedom to move.

In solids and liquids the particles are close, with strong forces between them; in a gas they are far apart, with tiny forces except in collisions.

So particles have kinetic energy from their random motion, and potential energy from the forces between them, which depends on their separation.

is a total over every particle, so twice the mass of the same substance, in the same phase and at the same temperature, has twice the internal energy.

The motion and height of the whole object do not count: a thrown ball has the same internal energy as at rest, at the same temperature.

is different: kelvin temperature measures the average random kinetic energy per particle. A sparkler's spark is over 1000 ∘C1000\,^{\circ}\text{C} but has little internal energy, as it has so few particles.

Worked exampleA sealed flask of water is on a train that speeds up from rest to 30 m s−1\pu{30 m s-1}. No energy is transferred thermally to or from the water. Explain whether the water's internal energy changes.

Try it first, then reveal one step at a time.

  1. Recall what internal energy counts.
Worked exampleA bath holds 120 kg\pu{120 kg} of water at 38 ∘C38\,^{\circ}\text{C}. A mug holds 0.30 kg\pu{0.30 kg} of tea (mostly water) at 85 ∘C85\,^{\circ}\text{C}. Compare the average random kinetic energy of the molecules, and the internal energy, of the two.

Try it first, then reveal one step at a time.

  1. Temperature tells you the average energy per molecule.
Check yourself
Which of these increases the internal energy of the air in a sealed, rigid bottle?
Check yourself
Copper blocks A and B are at the same temperature, and A has twice the mass of B. How does A's internal energy compare with B's?

Which way thermal energy flows

Put a hot pan on a cold worktop: the pan cools and the worktop warms, never the reverse on its own.

, often called heat, is energy in transit: a body has internal energy, but it does not "contain heat". The energy transferred is QQ, in joules.

The temperature difference alone decides which way the net transfer goes: from higher to lower temperature. Which body has more internal energy does not matter.

At the contact, the hotter body's particles have the greater average kinetic energy, so collisions pass more energy from hot to cold than back. You meet in 2.3.

The transfer continues until the temperatures are equal: the bodies are in . Collisions still exchange energy, but the transfers balance.

From 2.1, a change of 1 K equals a change of 1 ∘C1\,^{\circ}\text{C}, so ΔT\Delta T has the same value on both scales.

Worked exampleA metal spoon at 70 ∘C70\,^{\circ}\text{C} is dropped into a swimming pool at 26 ∘C26\,^{\circ}\text{C}. The pool has far more internal energy than the spoon. Explain which way the net thermal energy transfer goes, and when it stops.

Try it first, then reveal one step at a time.

  1. Decide what sets the direction: temperature, not internal energy.
Worked exampleA rubber ball at 21 ∘C21\,^{\circ}\text{C} is lowered into liquid nitrogen at −196 ∘C-196\,^{\circ}\text{C} and left there until it reaches thermal equilibrium with the nitrogen. Calculate the change in temperature of the ball, in kelvin.

Try it first, then reveal one step at a time.

  1. At thermal equilibrium the ball is at the nitrogen's temperature: Tf=−196+273=77 KT_\text{f} = -196 + 273 = \pu{77 K}.
Check yourself
Block P, at 40 ∘C40\,^{\circ}\text{C}, has three times the internal energy of block Q, at 330 K\pu{330 K}. They are put in contact, insulated. Which way does the net thermal energy transfer go?
Check yourself
A bowl of soup cools from 82 ∘C82\,^{\circ}\text{C} to 47 ∘C47\,^{\circ}\text{C}. What is the size of its temperature change in kelvin?

Specific heat capacity

Give the same energy to 1 kg of water and 1 kg of dry sand, and the sand gets far hotter. Each substance needs its own energy per kilogram per kelvin.

links the energy QQ to the mass mm and the temperature change ΔT\Delta T. This equation is in the data booklet.

In the formula booklet
Q=mcΔTQ = mc\Delta T

QQ is in J, mm in kg, ΔT\Delta T in K (or °C) and cc in J kg−1 K−1\text{J kg}^{-1}\,\text{K}^{-1}.

Water's cc is high, about 4.18⋅103 J kg−1 K−1\pu{4.18e3 J kg-1 K-1}, which is why seas warm and cool slowly. It is not in the data booklet, so a question gives it.

Worked exampleTo measure the specific heat capacity of aluminium, a student puts a 60.0 W\pu{60.0 W} electric heater into a 1.40 kg\pu{1.40 kg} aluminium block and switches it on for 4.00 min\pu{4.00 min}. The block's temperature rises from 19.2 ∘C19.2\,^{\circ}\text{C} to 30.8 ∘C30.8\,^{\circ}\text{C}. Assume all the energy from the heater goes into the block. Determine the specific heat capacity of aluminium.

Try it first, then reveal one step at a time.

  1. Energy from the heater, using ×\times time: Q=Pt=60.0×(4.00×60)=14400 JQ = Pt = 60.0 \times (4.00 \times 60) = \pu{14400 J}.

When a hot and a cold body mix in an insulated container that takes negligible energy itself, gives: energy lost by the hot body = energy gained by the cold body. Both end at one temperature.

Worked exampleA 0.250 kg\pu{0.250 kg} copper block at 95.0 ∘C95.0\,^{\circ}\text{C} is placed in 0.400 kg\pu{0.400 kg} of water at 18.0 ∘C18.0\,^{\circ}\text{C} in an insulated container. Take c=385 J kg−1 K−1c = \pu{385 J kg-1 K-1} for copper and c=4180 J kg−1 K−1c = \pu{4180 J kg-1 K-1} for water. Calculate the final temperature of the water.

Try it first, then reveal one step at a time.

  1. Let the final temperature be TT in °C. The copper cools by (95.0−T)(95.0 - T) and the water warms by (T−18.0)(T - 18.0).
Check yourself
Equal masses of metals X and Y get the same energy. X warms by 12 K\pu{12 K} and Y by 4.0 K\pu{4.0 K}. How does the specific heat capacity of Y compare with that of X?
Check yourself
A 2.5 kg\pu{2.5 kg} concrete slab, with c=880 J kg−1 K−1c = \pu{880 J kg-1 K-1}, absorbs 33 kJ\pu{33 kJ} from sunlight. Calculate its rise in temperature, in K to 2 significant figures.

Phase changes and specific latent heat

Heat ice steadily and record its temperature. Twice, it stops rising.

Heating curve for ice heated at a constant rate, not to scale: temperature rises, stays at 0 degrees Celsius while melting, rises again, stays at 100 degrees Celsius while boiling for a longer time, then rises again as steam. 0 100 solid melting solid + liquid liquid boiling liquid + gas gas sloping: temperature and average Ek rise flat: phase change, average Ek constant, Ep rises time (energy supplied at a constant rate) temperature / °C
Heating curve for water (not to scale). On the flat parts energy goes in, but the temperature holds.

On the sloping parts the temperature, and so the average random kinetic energy, rises. On the flat parts the substance changes phase at constant temperature.

When a solid melts, the energy does work against the forces holding the particles in place. Their intermolecular potential energy rises; their average kinetic energy, and so the temperature, does not.

Melting is solid to liquid; freezing is the reverse. Boiling is liquid to gas throughout the liquid, at the boiling point; condensing is the reverse. Freezing and condensing release energy.

Evaporation is liquid to gas at the surface only, at any temperature. The fastest molecules escape, so the rest have a lower average kinetic energy and the liquid cools.

has two values: LfL_\text{f} for fusion (melting) and LvL_\text{v} for vaporization (boiling). This equation is in the data booklet.

In the formula booklet
Q=mLQ = mL

LL is in J kg−1\text{J kg}^{-1}. For water, Lv≈2.26⋅106 J kg−1L_\text{v} \approx \pu{2.26e6 J kg-1} is about 7 times Lf≈3.34⋅105 J kg−1L_\text{f} \approx \pu{3.34e5 J kg-1}: boiling pulls particles fully apart; melting only loosens them.

Worked exampleA pan of water boils steadily on a hotplate that keeps supplying energy, yet the water stays at 100 ∘C100\,^{\circ}\text{C}. Explain this in terms of the water molecules.

Try it first, then reveal one step at a time.

  1. Link the constant temperature to the molecules' kinetic energy.
Worked exampleAn ice cube of mass 0.120 kg\pu{0.120 kg} is taken from a freezer at −18 ∘C-18\,^{\circ}\text{C} and left until it has become water at 25 ∘C25\,^{\circ}\text{C}. Calculate the total energy it absorbs. Use cice=2.10⋅103 J kg−1 K−1c_\text{ice} = \pu{2.10e3 J kg-1 K-1}, Lf=3.34⋅105 J kg−1L_\text{f} = \pu{3.34e5 J kg-1} and cwater=4.18⋅103 J kg−1 K−1c_\text{water} = \pu{4.18e3 J kg-1 K-1}.

Try it first, then reveal one step at a time.

  1. Split the change at the phase change: warm the ice to 0 ∘C0\,^{\circ}\text{C}, melt it, warm the water.
Check yourself
Steam at 100 ∘C100\,^{\circ}\text{C} condenses to water at 100 ∘C100\,^{\circ}\text{C}. What happens to the intermolecular potential energy and the average random kinetic energy of the molecules?
Check yourself
A faulty kettle keeps boiling water at 2.2 kW\pu{2.2 kW}. For water, Lv=2.26⋅106 J kg−1L_\text{v} = \pu{2.26e6 J kg-1}. Assuming all the energy goes into the water, calculate the time to boil away 0.18 kg\pu{0.18 kg}, in minutes to 2 significant figures.

Common mistakes

  • Writing that internal energy is "kinetic plus potential energy". Say total random kinetic energy plus total intermolecular potential energy.
  • Thinking energy flows from the body with more internal energy. Temperature decides: from higher to lower.
  • Saying particles speed up during melting or boiling. The temperature is constant, so their average kinetic energy is too.
  • Putting a temperature, not a change, into Q=mcΔTQ = mc\Delta T. Subtract first; no 273 is needed for a change.
  • Leaving LL in kJ kg−1\text{kJ kg}^{-1} or mass in grams. Convert to J and kg first.
  • Missing a stage when ice becomes warm water: warm the ice, melt it, then warm the water, with separate values of cc.

Exam tips

  • "State" what internal energy is with every key word: total, random kinetic, intermolecular potential.
  • "Explain" a constant-temperature phase change in two sentences: average kinetic energy unchanged; energy increases the intermolecular potential energy.
  • Multi-stage "calculate" or "show that": one QQ line per stage with its substitution, then add. In a "show that", give one more significant figure than stated.
  • Paper 1A: with the same energy and mass, c∝1ΔTc \propto \frac{1}{\Delta T}.

Key takeaways

In bookletQ=mcΔTQ = mc\Delta T
In bookletQ=mLQ = mL
Learn thisInternal energy = total random kinetic energy of the particles + total intermolecular potential energy.
Learn thisNet thermal energy transfer goes from higher to lower temperature until thermal equilibrium, whatever the internal energies.
Learn thisDuring a phase change of a pure substance, temperature and average random kinetic energy are constant; intermolecular potential energy changes.
Learn thisΔT\Delta T is the same in K and °C; actual temperatures convert with TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.
Learn thisInsulated mixing, ignoring the container: energy lost by the hot body = energy gained by the cold body.

Practise this

86 past-paper questions on Thermal concepts and energy transfer in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Thermal concepts and energy transfer →