Scalars and vectors
In a minute
A has size only. A has size and direction, so works with arrows placed head to tail, not plain sums. into two perpendicular components turns awkward angles into simple sums, and the measures angles by arc length, which is how rotation and waves are described.
You'll be able to
- Identify a quantity as a scalar or a vector, and use a sign to give a vector's direction along a line.
- Draw a vector to scale, labelled with its magnitude, direction and point of application.
- Multiply a vector by a scalar, including a negative one, and say what happens to its size and direction.
- Add and subtract up to three vectors in a plane, by drawing and by calculation.
- Resolve a vector into two perpendicular components, and use components to add vectors.
- Measure angles in radians and convert between degrees and radians.
Before you start3 quick questions on what this builds on
Scalar or vector?
'Walk 50 m' doesn't tell you where you will end up. 'Walk 50 m north' does. Some quantities need a direction to be complete, and some don't.
Scalars include mass, , , time, , , temperature, pressure and charge.
Vectors include , , , (including weight), momentum and field strength.
Along a straight line, a vector's direction is just a sign. Choose a positive direction, then a vector pointing the other way is negative.
A scalar can be negative too, such as a temperature of or a negative charge. That sign is not a direction.
Electric current flows one way round a circuit, but it is a scalar. Currents meeting at a junction add as plain numbers, whatever the angle between the wires.
Try it first, then reveal one step at a time.
- Marking point 1: name what each reading measures, distance and displacement.
- Marking point 2: distance is a scalar, the total length of the path.
- Marking point 3: displacement is a vector, the straight-line change in position.
- Marking point 4: the trail is not straight, so the path is longer than the straight line.
- The first reading is her distance and the second is the magnitude of her displacement. Distance is a scalar: it is the total length of the path, with no direction. Displacement is a vector: it is the straight-line change in position from start to finish, with a direction. The trail winds, so the path is longer than the straight line. So the distance, 9.0 km, is larger than the displacement's magnitude, 2.0 km.
Try it first, then reveal one step at a time.
- Up is positive, so the two displacements are and .
- Add them with their signs: .
- The minus sign means below the ground floor.
- Compare the distance travelled, a scalar: . Distances add without signs.
Drawing vectors and multiplying by a scalar
A vector is drawn as an arrow. Its length shows the magnitude, using a scale you state. Its arrowhead and angle show the direction.
For a force, the arrow starts at the point of application: the point on the body where the force acts. A rope pulls where it is tied; weight acts at the centre of mass.
Label each arrow with its symbol and magnitude, such as , and give its angle from a reference line.
In print a vector is often bold, , and its magnitude plain, . By hand, draw an arrow over the letter.
Many equations multiply a vector by a scalar: weight is mass times .
Dividing by a scalar follows the same rule. Mass and time are positive, so they never reverse a direction.
Try it first, then reveal one step at a time.
- The acceleration of free fall is (from the data booklet), vertically downwards.
- Weight is the scalar times this vector: .
- The mass is positive, so the direction is unchanged: vertically downwards.
- Round to 2 significant figures, like the mass.
Try it first, then reveal one step at a time.
- At constant velocity, displacement velocity time.
- Time is a positive scalar, so the displacement points the same way as the velocity: due west.
- Magnitude: .
- State both parts: 54 m due west.
Adding and subtracting vectors
Walk 40 m east, then 30 m north. You have walked 70 m, but you are only 50 m from the start. Vectors at an angle don't add like plain numbers.
The order doesn't matter: . For three vectors, add the third to the head of the second.
There are three cases. Along one line, add with signs. At right angles, use Pythagoras and trigonometry. At any other angle, use a scale drawing or components (next section).
Here and are perpendicular vectors, is the magnitude of the resultant, and is the angle between and .
Two vectors give the biggest resultant when they point the same way, , and the smallest when they are opposite, . Every other angle gives a value between these.
Try it first, then reveal one step at a time.
- Combine the two vectors along the north–south line first, with north positive: .
- Now add north and east, which are perpendicular.
- .
- Direction: , so east of north.
Subtracting a vector means adding its negative: . Reverse , then add it head to tail as before.
You subtract vectors whenever you need a change. The change in velocity is final minus initial.
Along a line, give each velocity its sign before subtracting. A body that reverses direction has a change in velocity bigger than either speed.
Try it first, then reveal one step at a time.
- . Reversing the initial velocity gives due west.
- Add north and west. They are perpendicular, so use Pythagoras.
- .
- The change points north of west, so the stick pushed the puck north of west.
Resolving a vector into components
Resolving runs addition backwards: it replaces one vector with two perpendicular vectors that add up to it.
Here is measured from the -direction. The component next to the angle uses ; the one opposite it uses .
Choose the directions to suit the problem: horizontal and vertical, or along and perpendicular to a slope. Give each component a sign from your positive directions.
Components also add vectors at any angle. Resolve each vector, add all the -components and all the -components, then combine the two totals with Pythagoras.
Try it first, then reveal one step at a time.
- The horizontal side of the triangle is next to the 25° angle, so it uses cos.
- .
- For comparison, the vertical component is , which partly lifts the case.
- Round to 2 significant figures, like the data.
Try it first, then reveal one step at a time.
- Take east and north as positive.
- East components: .
- North components: .
- Combine: .
- Direction: , so north of east.
Radians
A degree is an arbitrary of a turn. The radian measures an angle by the arc it cuts off a circle, which makes rotation and wave equations simpler.
In general, an arc of length on a circle of radius makes an angle at the centre, in radians:
A whole turn has arc length , the circumference, so it is rad. That fixes the conversion: , so .
A radian is a length divided by a length, so it has no dimensions. Still write 'rad', as in angular velocity in .
Set your calculator to radian mode to find or of an angle in radians, and back to degree mode for degrees.
Try it first, then reveal one step at a time.
- Multiply by : .
- .
- Sense check: is a little more than , so a little more than 1 rad.
Try it first, then reveal one step at a time.
- only works in radians, so convert first: .
- Rearrange: .
- Using 110 directly would give , which is far too long for a wiper.
- Round to 2 significant figures, like the blade length.
Common mistakes
- Adding the magnitudes of vectors that are not in the same direction. Draw them head to tail, then use Pythagoras or components.
- Writing a change in velocity as final speed minus initial speed when the body reverses. Give each velocity its sign first: , not .
- Swapping and when resolving. The component next to the angle uses , whichever way the diagram is drawn.
- Calling a quantity a vector because it can be negative. Temperature and charge can be negative but have no direction.
- Using degrees in . Convert to radians first, with .
Exam tips
- In a Paper 1A "which list" question, test each quantity on its own: does it need a direction to be complete?
- "Draw and label" a force: start the arrow at the point of application, make its length match the size, and label it with a symbol.
- "Calculate" or "determine" a resultant: give the magnitude with a unit and the direction as an angle from a stated reference, such as 33° north of east.
- When a question gives an angle in radians, write "rad" and check your calculator mode before using sin, cos or tan.
Key takeaways
Practise this
2 past-paper questions on Vectors, scalars and representation in the Physics HL bank, each with a mark scheme and a worked explanation.