Mechanical energy
In a minute
A system holds in three forms: from motion, from height and in a stretched or squashed spring. When only and spring do (no , air resistance or driving force), the total stays constant and only changes form. That lets you find speeds and heights without knowing the path.
You'll be able to
- Calculate kinetic, gravitational potential and elastic potential energy, and add them to find the mechanical energy of a system.
- State the condition for mechanical energy to be conserved, and use conservation to find speeds, heights and compressions.
- Explain energy changes as done: the and spring forces transform energy between forms, so the work equals the energy transformed.
- Use the work done by friction, air resistance and other non-conservative forces to account for a change in mechanical energy.
Before you start3 quick questions on what this builds on
Revise first: 1.2 Equations of motion and motion graphs, 1.3 Projectile motion, 1.4 Newton's laws and free-body diagrams, 1.5 Contact and field forces, 1.6 Momentum and impulse and 1.9 Work and energy transfer
Kinetic, gravitational and elastic energy
A ball flying through the air is moving and is above the ground. A stretched catapult is about to fling a stone. Each holds energy because of its motion, its height or its shape.
Their names are (motion), (height) and (shape). Each has its own equation.
is the mass in kg, the speed in and the momentum. Kinetic energy is a scalar and never negative, so the direction of motion does not matter.
Because the speed is squared, doubling the speed makes the kinetic energy four times as large. Use when you know the momentum.
Now lift a body of mass slowly through a height . You must push up with a equal to its , , over a distance . So you do , and that energy is stored as gravitational potential energy.
comes from the data booklet. Only changes in height matter, so you may choose any level as zero, such as the floor or the lowest point of the motion.
is the vertical change in height, not the distance along a slope. The equation only holds close to Earth's surface, where is constant. Far from Earth gets smaller and this equation fails.
A spring that obeys pushes back with a force , where is the and the extension or compression. The force grows from zero as you stretch it.
The work you do stretching it is the area under the force–extension graph. That area is a triangle of base and height , so the energy stored is .
All three equations are in the data booklet. Compression stores energy just as extension does, because is positive either way.
Try it first, then reveal one step at a time.
- You know the momentum, so use .
- Substitute: .
- So .
- Check with the speed: and , the same.
Try it first, then reveal one step at a time.
- Kinetic energy: .
- Gravitational potential energy above the floor: .
- Elastic potential energy: .
- Add the three: .
Conservation of mechanical energy
A skateboarder drops into a smooth half-pipe. Going down, she loses height and gains speed; going up, the reverse.
If nothing rubs or drags, no energy leaves as thermal energy. The total of her kinetic and gravitational potential energy stays the same.
Here is how the fits in. As a body falls through , its does work on it. Exactly that much gravitational potential energy is transformed into kinetic energy.
So when mechanical energy is conserved, the work done by the weight or a spring force is the energy transformed between forms.
1. Pick two moments, 1 and 2, and a zero level for height.
2. Write the mechanical energy at each moment, leaving out any form that is zero there (no speed, no height, no compression).
3. Set the totals equal and solve. The path between the two moments does not matter, only the start and the end.
Try it first, then reveal one step at a time.
- Take B as the zero of height. At A: and . At B: and .
- Mechanical energy is conserved: .
- The mass cancels, so .
- The ramp is curved, so her acceleration is not uniform and the equations of motion do not apply. Energy works for any shape of ramp.
Try it first, then reveal one step at a time.
- At the start the ball is at rest, so all the mechanical energy is elastic: .
- At the top the ball is momentarily at rest and the spring is no longer compressed, so all of it is gravitational potential energy: .
- Mechanical energy is conserved: .
- So . Round to 2 significant figures, like the data.
Try it first, then reveal one step at a time.
- Marking point 1: the tension acts at right angles to the bob's motion, so it does no work.
- Marking point 2: only the weight does work, so mechanical energy is conserved.
- Marking point 3: at each end of the swing the bob is momentarily at rest, so all its mechanical energy is gravitational potential energy.
- Marking point 4: equal gravitational potential energy means equal height.
- The tension in the string always acts at right angles to the bob's motion, so it does no work on the bob. The only force that does work is the weight, and there is no air resistance, so the mechanical energy of the bob is conserved. At each end of the swing the bob is momentarily at rest, so its kinetic energy is zero and all its mechanical energy is gravitational potential energy. The gravitational potential energy is therefore the same at both ends, so the bob reaches the same height.
When friction and air resistance act
On a real playground slide, a child reaches the bottom slower than the frictionless answer predicts. Some mechanical energy has gone.
It has not been destroyed: still holds. and have transferred it to , warming the slide, the child's clothes and the air.
Friction, air resistance and a push from a motor are non-conservative forces: the work they do is not stored as potential energy. You met them in 1.9.
A resistive force acts against the motion, so it does negative work. If a constant resistive force along a path of length is the only non-conservative force, the mechanical energy falls by .
Use the length of the path for the work done by friction, but the vertical height for . A motor or a person pushing can do positive work and increase the mechanical energy.
Try it first, then reveal one step at a time.
- Gravitational potential energy lost: .
- Kinetic energy gained: .
- The mechanical energy falls by . This is the work done against friction.
- Friction acts along the whole path: . Round to 2 significant figures.
Try it first, then reveal one step at a time.
- The floor is level, so .
- Mechanical energy at the start, all kinetic: .
- Mechanical energy when it stops, all elastic: .
- Work done against friction over the : , so .
Try it first, then reveal one step at a time.
- Marking point 1: the speed is constant, so the kinetic energy does not change.
- Marking point 2: the lift gains height, so its gravitational potential energy increases.
- Marking point 3: mechanical energy changes only through work done by non-conservative forces; the cable tension does positive work.
- Marking point 4: the energy comes from the electrical energy supplied to the motor.
- The lift moves at constant speed, so its kinetic energy does not change. It gains height, so its gravitational potential energy increases, and its mechanical energy increases. Mechanical energy can only change when a non-conservative force does work. The tension in the cable acts upwards as the lift moves upwards, so it does positive work on the lift equal to the gain in gravitational potential energy. This energy comes from the electrical energy supplied to the motor.
Common mistakes
- Saying mechanical energy is conserved without the condition. State that friction and air resistance are negligible and no other force, such as a motor or push, does work.
- Using the distance along a slope in . The height change is always vertical.
- Writing "gravity" for a force in an explanation. Name the force: the weight of the body.
- Thinking energy is lost when mechanical energy falls. It has been transferred, usually to internal energy of the surfaces and the air.
Exam tips
- "Calculate" a speed with energy: write the energy equation with the substitution, such as , then the answer with its unit. The equation earns the first mark.
- "Explain" or "outline" energy changes: name each form that rises or falls, and say which force does the work. Bare words like "gravity" or "energy is lost" don't earn marks.
- Don't count the weight twice. Either include the work done by the weight or include , never both.
Key takeaways
Practise this
62 past-paper questions on Work, energy and power in the Physics HL bank, each with a mark scheme and a worked explanation.