Resonance and damping
In a minute
Every object that can oscillate has a . Push it with a periodic force at that and its grows large: this is . removes energy, so it lowers and flattens the resonance peak and decides how quickly a disturbed system settles.
You'll be able to
- Tell free oscillations at the natural frequency from at the driving frequency.
- Describe how the amplitude of a forced oscillation depends on the driving frequency, and explain resonance in terms of energy.
- Give useful and destructive effects of resonance.
- Describe how damping changes the maximum amplitude and the resonant frequency of a driven system.
- Describe light, and heavy damping, and say where each is wanted.
Before you start3 quick questions on what this builds on
Revise first: 3.1 Simple harmonic motion, 3.3 Travelling waves, 3.5 Superposition and double-slit interference and 3.7 Standing waves
Natural frequency and forced oscillations
Pull a mass on a spring down and let go. It bobs at one particular frequency, whatever size the pull. Nothing keeps pushing it, so this is a free oscillation.
A free oscillation with a restoring force proportional to displacement is . So for a mass on a spring of spring constant , the natural frequency comes from the equation of 3.1:
This and are printed in section C.1 of the data booklet. For a pendulum of length , use , with from the data booklet.
Now hang the spring from a vibration generator. It applies a periodic driving force at a driving frequency you choose.
Once settled, a has the driving frequency, not the natural frequency. The natural frequency controls the size of the motion: for light damping, the closer the two frequencies, the larger the amplitude.
Try it first, then reveal one step at a time.
- Find the period of free oscillation: .
- (keep the full value on your calculator).
- Natural frequency: .
- The data have 2 significant figures, so give 2.
Try it first, then reveal one step at a time.
- Say which frequency a forced oscillation takes, then use the natural frequency to judge the amplitude.
- The mass oscillates at 5.0 Hz, the driving frequency. This is a forced oscillation, so once the motion has settled the periodic force sets its frequency. The natural frequency of 2.0 Hz is only the frequency of free oscillation. The amplitude is small because the driving frequency is far from the natural frequency. At 2.0 Hz the driving frequency equals the natural frequency, so the amplitude is much larger.
Resonance
Raise the driving frequency slowly. The amplitude is small at first, becomes large near , then drops again. A graph of amplitude against driving frequency has a peak (see the figure in the next section).
Why? Driven at its natural frequency, the force always pushes in the direction of motion, so it transfers energy to the system every cycle. At other frequencies some pushes act against the motion and take energy back, so less energy is transferred each cycle.
The amplitude stops growing when the energy lost to resistive forces per cycle equals the energy supplied per cycle.
Many systems have more than one natural frequency. A guitar string or the air in a pipe has a whole set of patterns, the of 3.7. Each harmonic is a natural frequency, so the string or pipe resonates at each one.
A radio's tuning circuit has an adjustable natural frequency, so it responds strongly to one station only. To protect a structure, engineers change its natural frequency, avoid the driving frequency, or add damping.
Carbon dioxide and water molecules have natural frequencies in the infrared, so they absorb infrared strongly at those frequencies: a resonance model of the in 2.6.
Try it first, then reveal one step at a time.
- The driving frequency is the number of pushes per second.
- There are 60 seconds in a minute: .
- , given to one more significant figure than the stated value.
- This equals the panel's natural frequency, so the panel resonates and rattles loudly.
Try it first, then reveal one step at a time.
- Link the timing of the pushes to the work they do, then compare energy in and energy out per cycle.
- Because the pushes are at the natural frequency, each push is in the same direction as the swing's motion. So each push does positive work on the swing, and energy is transferred to it every cycle. The swing's energy, and so its amplitude, increases. As the amplitude grows, air resistance and friction remove more energy each cycle. The amplitude stops increasing when the energy lost per cycle equals the energy supplied per cycle.
Damping and the resonance curve
The energy is not destroyed. forces transfer it to of the system and its surroundings, which warm very slightly.
Drive one system across a range of frequencies with different amounts of damping, for example by fixing card to the mass.
You only need to describe these changes, not calculate them. For light damping the shift is tiny, so take the resonant frequency as .
Try it first, then reveal one step at a time.
- Compare the height, position and width of the peak, then use energy per cycle to explain the height.
- The new curve has a lower maximum amplitude. Its peak is at a slightly lower frequency than before. The peak is broader, and the new curve lies below the first at all but the lowest frequencies. The card increases air resistance, so more energy is lost per cycle at any given amplitude. So the energy lost per cycle equals the energy supplied per cycle at a smaller amplitude.
Try it first, then reveal one step at a time.
- Ratio of the maximum amplitudes: .
- , so 2 significant figures gives 2.6. A ratio of two lengths has no unit.
- The peak moved from to : slightly lower, as extra damping predicts.
Light, critical and heavy damping
Now switch the driver off, displace the system and release it.
Light damping: the system oscillates with gradually decreasing amplitude and an almost unchanged period, like a plucked guitar string.
is the boundary case: no overshoot, and the fastest return of any non-oscillating motion. Heavy damping: no oscillation either, but a slow return.
Car suspensions and meter needles are built close to critical damping. Door closers are often heavily damped, so doors close slowly without slamming.
Try it first, then reveal one step at a time.
- After one oscillation: . After two: .
- After 6 oscillations: .
- ; give 2 significant figures.
- Check: the amplitude is smaller, as expected.
Try it first, then reveal one step at a time.
- Say what each kind of damping would make the needle do, then why critical is best for reading the meter.
- With light damping the needle would overshoot and oscillate about the reading before settling, so it would be hard to read. With heavy damping the needle would not oscillate, but it would move to the reading slowly. Critical damping brings the needle to the reading in the shortest time without oscillating. So the reading can be taken quickly and accurately.
Common mistakes
- Drawing a more damped resonance curve that is higher, peaks at a higher frequency, or crosses the original.
- Writing just "friction" for why the amplitude falls. Say resistive forces transfer energy out each cycle.
- Confusing critical and heavy damping. Both avoid oscillation, but only critical damping returns the system in the shortest time.
- Saying resonance happens at "high frequency". It happens where the driving frequency equals the natural frequency, whatever that is.
Exam tips
- "Explain" resonance: driving frequency equals natural frequency, so the energy transferred to the system each cycle is greatest and the amplitude is largest. Name both frequencies.
- "Sketch" or "draw" the effect of more damping on a resonance curve: a lower peak at the same or a slightly lower frequency, with the new curve below the old one and never crossing it.
- "Describe" light, critical or heavy damping: say whether the system oscillates and how quickly it returns to equilibrium.
Key takeaways
Practise this
85 past-paper questions on Standing waves, resonance and Doppler effect in the Physics HL bank, each with a mark scheme and a worked explanation.