3.7 · SLPaper 1Paper 2

Standing waves

In a minute

A forms when two identical travel in opposite directions and combine by , usually a wave and its own . Some points never move, the , and some move the most, the . On a string or in a pipe, the ends decide which patterns, called , fit, and so which frequencies it can sound.

You'll be able to

  • Explain how a standing wave forms and how it differs from a travelling wave.
  • Find nodes and antinodes, and use the distance between them to find the .
  • Describe how the and phase of points change along a standing wave.
  • Sketch the standing-wave patterns on strings and in pipes for each pair of end conditions.
  • Calculate the wavelength and of the nnth harmonic from the length and the wave speed.
Before you start3 quick questions on what this builds on
Check yourself
A wave on a rope has 12 Hz\pu{12 Hz} and wavelength 0.35 m\pu{0.35 m}. What is its speed, in m s−1\text{m s}^{-1}?
Check yourself
Two waves with the same meet at a point in antiphase, a of π\pi rad. What is the resultant amplitude there?
Check yourself
A sound wave travels along a pipe. How do the air particles move?

Revise first: 1.5 Contact and field forces, 3.1 Simple harmonic motion, 3.3 Travelling waves, 3.4 Reflection, refraction and Snell's law and 3.5 Superposition and double-slit interference

How a standing wave forms

Pluck a guitar string and it blurs into a shape that stays in place. Some points shake hard; others never move. This is a .

It is made of two travelling . A wave runs along the string, reaches the end and . The incident and reflected waves then overlap all along the string.

A stretched string shown at five instants during one oscillation of a standing wave. The string has four nodes, marked N, evenly spaced along it, including both ends, and an antinode, marked A, halfway between each pair of nodes. At the nodes the string never moves. At the antinodes it swings furthest, between the solid curve at its highest and the opposite solid curve at its lowest, with dashed curves at in-between times. The distance from one node to the next is marked half a wavelength, and so is the distance from one antinode to the next. N N N N A A A λ/2 antinode to antinode: λ/2 N = node, A = antinode
One standing wave at several instants. N marks the nodes and A the antinodes.

At some points the two waves always arrive in antiphase. Their displacements cancel at every instant by , so these points never move. They are .

Halfway between the nodes, the waves always arrive in phase. gives the largest oscillation there. These points are .

Every point except a node oscillates with at the of the travelling waves. Only the varies.

A travelling wave carries energy from place to place. In a standing wave the two waves carry equal energy in opposite directions, so there is no net energy transfer.

Worked exampleA vibration generator shakes one end of a stretched elastic cord. The other end is tied to a fixed post. At certain frequencies the cord forms a steady pattern of loops. Outline how this standing wave forms.

Try it first, then reveal one step at a time.

  1. Name the two waves, say why they match, then say what their superposition does.
Worked exampleTwo waves, each of amplitude 4.0 mm\pu{4.0 mm} and frequency 30 Hz\pu{30 Hz}, travel in opposite directions along a wire and form a standing wave. Determine the amplitude of an antinode.

Try it first, then reveal one step at a time.

  1. At an antinode the two waves always arrive in phase.
Check yourself
Which statement is true for a standing wave but not for a travelling wave?
Check yourself
A standing wave on a cord oscillates at 15 Hz\pu{15 Hz}. How many times each second is the whole cord momentarily straight?

Nodes, antinodes, amplitude and phase

Nodes are evenly spaced, with an antinode halfway between each pair. The spacing depends on the wavelength λ\lambda of the travelling waves.

Learn this
node to next node=λ2node to next antinode=λ4\text{node to next node} = \frac{\lambda}{2} \qquad \text{node to next antinode} = \frac{\lambda}{4}

So measuring the distance between nodes gives you λ\lambda. Then v=fλv = f\lambda, from the data booklet, links it to the frequency.

Amplitude varies smoothly: zero at a node, largest at an antinode. If each travelling wave has amplitude AA, an antinode has amplitude 2A2A.

All points between two neighbouring nodes move in phase: they reach their highest points together. Points on opposite sides of a node are in antiphase, a of π\pi rad (180∘180^\circ).

One snapshot of a standing wave with two loops between three nodes, marked N, drawn inside its dashed envelope. In the left loop, point P sits at the antinode and point Q sits closer to the left-hand node, so Q has a smaller amplitude. Both P and Q have arrows pointing up: they move upwards together, in phase. In the right loop, point R is on the far side of the middle node and has an arrow pointing down: it moves opposite to P and Q, in antiphase. N N N P Q R P and Q: same loop, in phase R: across a node, in antiphase
P and Q have different amplitudes but the same phase. R, across a node, is in antiphase with both.

So the phase difference between two points is only ever 00 or π\pi. In a travelling wave it grows steadily with distance, and, if no energy is lost, every point has the same amplitude.

Worked exampleA standing wave forms on a stretched spring. A student measures 84 cm\pu{84 cm} from the first node to the fifth node. Determine the wavelength.

Try it first, then reveal one step at a time.

  1. From the 1st to the 5th node there are 4 gaps, not 5.
Worked exampleOn a standing wave, point X is λ4\frac{\lambda}{4} from a node. Point Y is λ8\frac{\lambda}{8} from the same node, on the other side. Compare the motion of X and Y.

Try it first, then reveal one step at a time.

  1. Use the spacing to place each point, then compare amplitude, phase and frequency.
Check yourself
Points P and Q on a standing wave have exactly two nodes between them. How do they oscillate relative to each other?
Check yourself
A standing wave is formed by sound of wavelength 0.96 m\pu{0.96 m}. What is the distance from a node to the nearest antinode, in m?

Standing waves on strings

A string can only hold standing waves that fit its length. Which ones fit depends on what happens at the ends: the boundary conditions.

A fixed end cannot move, so it is a node. A free end moves the most, so it is an antinode: for example, a string tied to a light ring that slides on a smooth pole.

The wave speed depends on the string's and mass per metre. On one string at one tension, every standing wave has the same speed vv.

Standing waves on a string of length L, drawn as solid and dashed envelopes. Top three rows, a string fixed at both ends: the first harmonic, n equals 1, is one loop with L equal to half a wavelength; the second harmonic, n equals 2, is two loops with L equal to one wavelength; the third harmonic, n equals 3, is three loops with L equal to three halves of a wavelength. Bottom row, a string fixed at the left end and tied at the right end to a ring that slides on a pole: the first harmonic has a node at the fixed end and an antinode at the free end, with L equal to a quarter of a wavelength. two fixed ends one fixed end, one free end n = 1 L = λ/2 n = 2 L = λ n = 3 L = 3λ/2 ring slides on pole n = 1 L = λ/4
Harmonics on a string of length LL. Each loop is half a wavelength.

With both ends fixed, the simplest pattern is one loop: node, antinode, node. The length is half a wavelength, L=λ2L = \frac{\lambda}{2}. Each extra loop adds another half wavelength: L=λL = \lambda, then L=3λ2L = \frac{3\lambda}{2}, and so on.

Learn this
λn=2Lnfn=nv2Ln=1,2,3,…\lambda_n = \frac{2L}{n} \qquad f_n = \frac{nv}{2L} \qquad n = 1, 2, 3, \ldots

So fn=nf1f_n = nf_1: every whole-number multiple is allowed, and the nnth harmonic has nn loops. Two free ends (antinodes at both) give the same wavelengths and frequencies.

Older books call the first harmonic the . In IB Physics, call it the first harmonic.

With one fixed and one free end, there is a node at one end and an antinode at the other. The first harmonic has L=λ4L = \frac{\lambda}{4}. The next has L=3λ4L = \frac{3\lambda}{4}: each step adds half a wavelength.

Learn this
λn=4Lnfn=nv4Ln=1,3,5,…\lambda_n = \frac{4L}{n} \qquad f_n = \frac{nv}{4L} \qquad n = 1, 3, 5, \ldots

Only odd harmonics exist here. An even nn would need a node at both ends or an antinode at both ends.

Worked exampleA guitar string is 0.65 m\pu{0.65 m} long between its fixed ends. Waves travel along it at 286 m s−1\pu{286 m s-1}. Determine the frequency of its third harmonic.

Try it first, then reveal one step at a time.

  1. Both ends fixed, so λn=2Ln\lambda_n = \frac{2L}{n}.
Worked exampleA rope 2.4 m\pu{2.4 m} long is fixed to a wall at one end. Its other end is tied to a light ring that slides freely on a smooth vertical pole. Waves travel along the rope at 6.0 m s−1\pu{6.0 m s-1}. Determine the frequency of the lowest harmonic above the first.

Try it first, then reveal one step at a time.

  1. Fixed end: node. Free end: antinode. So λn=4Ln\lambda_n = \frac{4L}{n} with nn odd.
Check yourself
A string fixed at both ends vibrates in its third harmonic at 540 Hz\pu{540 Hz}. What is the frequency of its first harmonic?
Check yourself
A string fixed at both ends vibrates in its fourth harmonic. How many nodes are there, counting the two ends?

Standing waves in pipes

Air in a pipe can hold standing waves too. Sound is a , so the air oscillates back and forth along the pipe, not up and down.

Sound reflects at closed and open ends, so a sound wave and its reflection form the standing wave. A loudspeaker at one end can drive it.

A closed end stops the air: a displacement node. At an open end the air moves freely: a displacement antinode, taken to be exactly at the end.

Pipe diagrams show the displacement amplitude along the pipe, not the shape of the wave: the air moves along the pipe.

Displacement standing waves in pipes of length L, two harmonics for each type, drawn as mirror-image envelopes inside each pipe. Pipe open at both ends: antinodes at both open ends; the first harmonic has one node in the middle, L equals half a wavelength; the second harmonic has two nodes, L equals one wavelength. Pipe closed at both ends: nodes at both closed ends; the first harmonic has one antinode in the middle, L equals half a wavelength; the second harmonic has two antinodes, L equals one wavelength. Pipe closed at the left and open at the right: a node at the closed end and an antinode at the open end; the first harmonic has L equal to a quarter of a wavelength; the next possible pattern is the third harmonic, L equals three quarters of a wavelength. open at both ends n = 1: L = λ/2 n = 2: L = λ closed at both ends n = 1: L = λ/2 n = 2: L = λ closed at left, open at right n = 1: L = λ/4 n = 3: L = 3λ/4
Displacement nodes at closed ends, antinodes at open ends.

Pipes open at both ends or closed at both ends have matching ends, like a string fixed at both ends. A pipe with a closed end and an open end has unlike ends, like a string with one free end.

Worked exampleA narrow tube, closed at the bottom and open at the top, holds an air column 0.49 m\pu{0.49 m} long. The speed of sound in the air is 343 m s−1\pu{343 m s-1}. Calculate the frequency of the first harmonic.

Try it first, then reveal one step at a time.

  1. Closed end: node. Open end: antinode. The first harmonic is a quarter of a wavelength: L=λ4L = \frac{\lambda}{4}.
Worked examplePipe A is open at both ends. Pipe B has the same length but is closed at one end. Explain why the first harmonic of pipe A has twice the frequency of the first harmonic of pipe B.

Try it first, then reveal one step at a time.

  1. Sketch both first harmonics, write LL in terms of λ\lambda for each, then use f=vλf = \frac{v}{\lambda}.
Check yourself
A 0.90 m\pu{0.90 m} pipe is closed at its left end and open at its right end. What wavelength does its third harmonic have?
Check yourself
A pipe open at both ends has a first harmonic of 440 Hz\pu{440 Hz}. The speed of sound is 343 m s−1\pu{343 m s-1}. How long is the pipe, in m? Give 3 significant figures.

Common mistakes

  • Saying a standing wave transfers energy. There is no net transfer: the two waves carry equal energy in opposite directions.
  • Writing "the waves bounce back and cancel". Name the reflection, the two identical waves travelling in opposite directions, and their superposition.
  • Giving a pipe with one closed end a second harmonic. Only odd harmonics fit: f1f_1, 3f13f_1, 5f15f_1 and so on.
  • Counting nodes instead of gaps. From the 1st to the 4th node there are 3 half-wavelengths.

Exam tips

  • "Outline" how a standing wave forms: give one point each for the reflection, the two waves travelling in opposite directions with the same frequency, and their superposition.
  • "Compare" standing and travelling waves on three things: energy transfer, amplitude along the wave, and phase between points.
  • In Paper 1A harmonic questions, sketch the pattern before you look at the options.

Key takeaways

Learn thisA standing wave forms when two waves with the same frequency, wavelength, amplitude and speed travel in opposite directions and superpose. It transfers no net energy.
Learn thisNodes have zero amplitude and antinodes the largest. Neighbouring nodes are λ2\frac{\lambda}{2} apart; a node and the next antinode are λ4\frac{\lambda}{4} apart.
Learn thisPoints between neighbouring nodes are in phase. Points on opposite sides of a node are in antiphase (π\pi rad).
Learn thisFixed string end or closed pipe end: node. Free string end or open pipe end: antinode.
Learn thisMatching ends: λn=2Ln\lambda_n = \frac{2L}{n}, fn=nv2Lf_n = \frac{nv}{2L}, n=1,2,3,…n = 1, 2, 3, \ldots
Learn thisUnlike ends: λn=4Ln\lambda_n = \frac{4L}{n}, fn=nv4Lf_n = \frac{nv}{4L}, n=1,3,5,…n = 1, 3, 5, \ldots (odd harmonics only).

Practise this

85 past-paper questions on Standing waves, resonance and Doppler effect in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Standing waves, resonance and Doppler effect →