1.4 · SLPaper 1Paper 2

Newton's laws and free-body diagrams

In a minute

A is a push or pull between two bodies. Draw every force on one body in a , then add them to get the . Newton's three laws say what that resultant does: zero means constant , non-zero means , and forces always come in pairs.

You'll be able to

  • Describe a as an interaction between two bodies, and name common forces with their standard symbols.
  • Draw a labelled for a body in one or two dimensions.
  • Find the from a free-body diagram, resolving angled forces where needed.
  • Use to find unknown forces on a body in translational equilibrium.
  • Use , F=maF = ma, to find accelerations and forces, including for connected bodies.
  • Identify force pairs and explain why they never cancel.
Before you start3 quick questions on what this builds on
Check yourself
A rope pulls with 18 N\pu{18 N} at 25∘25^{\circ} above the horizontal. What is the horizontal component of the pull, in newtons? Give 2 significant figures.
Check yourself
A cyclist speeds up from 2.0 m s−1\pu{2.0 m s-1} to 8.8 m s−1\pu{8.8 m s-1} in 4.0 s\pu{4.0 s}. What is her average acceleration, in m s−2\pu{m s-2}? Give 2 significant figures.
Check yourself
Which of these quantities is a ?

Revise first: 1.1 Describing motion, 1.3 Projectile motion, 1.5 Contact and field forces and 6.2 Scalars and vectors

Forces and free-body diagrams

Push a door and the door pushes back on your hand. A force always involves two bodies.

Some forces need contact, like the floor pushing on your feet. Others act at a distance through a field, like the Earth's pull.

Use the standard names and symbols. WW or FgF_\text{g} is the Earth's pull. The FNF_\text{N} is a surface pushing perpendicular to itself. Friction FfF_\text{f} acts along a surface. Tension TT pulls along a string or rope.

Fluids add FdF_\text{d} and FbF_\text{b}. Each force is covered in 1.5.

1. Choose one body. Show only forces acting on it, never forces it exerts on something else.

2. Start every arrow on the body, pointing the way the force acts. Label it with its name or symbol.

3. Make lengths roughly match sizes.

Free-body diagram of a box being dragged to the right across a rough floor by a rope. The box is drawn as a dot. Four labelled arrows start at the dot: weight W, the longest, pointing vertically down; normal force F N pointing vertically up, a little shorter than the weight; tension T pointing up and to the right along the rope, at 28 degrees above a dashed horizontal line; and friction F f pointing horizontally to the left, opposite to the motion. An arrow above the diagram shows the direction of motion to the right. Arrow lengths are roughly to scale. normal force FN weight W 28° tension T friction Ff motion
Four forces from four interactions: Earth, floor (twice) and rope. Every arrow starts on the dot.
Worked exampleA worker drags a heavy box of tiles to the right across a rough floor. She pulls a rope that is at an angle above the horizontal. Identify each force acting on the box, the body that exerts it, and its direction.

Try it first, then reveal one step at a time.

  1. List every body that touches the box, plus the Earth, which acts at a distance.
Worked exampleA volleyball has just left a player's hands and is moving vertically upwards. Air resistance is negligible. Describe the free-body diagram of the ball and explain why it shows no upward force.

Try it first, then reveal one step at a time.

  1. Only the Earth acts on the ball now.
Check yourself
A puck slides across smooth, level ice after being hit. Friction and air resistance are negligible. Which forces belong on its free-body diagram?
Check yourself
A person stands on bathroom scales. Which force does not belong on the free-body diagram of the person?

Resultant force and Newton's first law

A puck slid across smooth ice glides a long way. A book slid across a table soon stops, because friction acts on it.

In one dimension, choose a positive direction and give each force a sign. Then add them.

In two dimensions, each angled force into horizontal and vertical components. Add the components in each direction to get FxF_x and FyF_y. Then combine them.

Learn this
F=Fx2+Fy2tan⁡θ=FyFxF = \sqrt{F_x^{2} + F_y^{2}} \qquad \tan\theta = \frac{F_y}{F_x}

Constant velocity means constant speed and direction. A car rounding a bend at steady speed is not in equilibrium. A skydiver at is.

So in equilibrium, up = down and left = right. Each equation can give one unknown force.

Worked exampleTwo tugboats pull a barge. One pulls with 8.0 kN\pu{8.0 kN} due east and the other with 5.5 kN\pu{5.5 kN} due north. Water resistance is negligible at this instant. Calculate the magnitude of the resultant force on the barge.

Try it first, then reveal one step at a time.

  1. The forces are perpendicular, so they are the components: Fx=8.0 kNF_x = \pu{8.0 kN}, Fy=5.5 kNF_y = \pu{5.5 kN}.
Worked exampleThe box of tiles from the figure is dragged at constant velocity. The tension in the rope is 145 N\pu{145 N} at 28∘28^{\circ} above the horizontal, and the weight of the box is 386 N\pu{386 N}. Calculate the normal force from the floor on the box.

Try it first, then reveal one step at a time.

  1. Constant velocity, so the box is in equilibrium: the forces balance horizontally and vertically.
Check yourself
A lift moves upwards at a constant speed. How does the tension in its cable compare with its weight?
Check yourself
The oars push a rowing boat forwards with 210 N\pu{210 N}. Water drag of 145 N\pu{145 N} and wind of 38 N\pu{38 N} both act backwards. Taking forwards as positive, what is the resultant force on the boat, in newtons?

Newton's second law

Push an empty trolley and a full one equally hard: the empty one speeds up more. More force means more acceleration; more mass means less.

In the formula booklet
F=maF = ma

FF is the resultant force in N, mm the mass in kg, aa the acceleration in m s−2\pu{m s-2}. It is in the data booklet; the momentum form comes in 1.6.

Weight is mgmg, where g=9.8 m s−2g = \pu{9.8 m s-2} is the gravitational field strength from the data booklet.

Method: draw the free-body diagram, take the acceleration's direction as positive, then write resultant force = mama with numbers.

Free-body diagram of a lift accelerating upwards, drawn as a dot. Two labelled arrows start at the dot: tension T from the cable pointing vertically up, and weight mg pointing vertically down. The tension arrow is longer than the weight arrow. A separate arrow beside the diagram, not touching the dot, points up and is labelled acceleration a. tension T weight mg acceleration a (not a force)
Accelerating upwards, so T>mgT > mg. The acceleration is drawn apart from the body: it is not a force.
Worked exampleA lift and its passengers have a total mass of 780 kg\pu{780 kg}. As it sets off upwards, its acceleration is 1.4 m s−2\pu{1.4 m s-2} upwards. Calculate the tension in the cable.

Try it first, then reveal one step at a time.

  1. Tension TT acts up and weight mgmg down. Take up as positive.
Worked exampleA car of mass 1350 kg\pu{1350 kg} tows a trailer of mass 450 kg\pu{450 kg} along a level road. The road pushes the car forwards with 2885 N\pu{2885 N}. Resistive forces are 380 N\pu{380 N} on the car and 160 N\pu{160 N} on the trailer. Calculate the tension in the tow bar.

Try it first, then reveal one step at a time.

  1. Treat car and trailer as one system. The tow-bar forces act between its parts, so they cancel.
Check yourself
A skydiver of mass 65 kg\pu{65 kg} falls with air resistance of 390 N\pu{390 N} acting on her. What is her acceleration, in m s−2\pu{m s-2}? Give 2 significant figures.
Check yourself
A lift moving downwards slows down as it nears the ground floor. How does the tension in its cable compare with its weight?

Newton's third law

Step off a small boat and the boat moves backwards. You can't push something without being pushed.

A third-law pair acts on two different bodies. Both forces are the same type, such as both gravitational or both contact, and exist at the same time.

Acting on different bodies, the pair never cancels. Its forces belong on two different free-body diagrams.

Three small diagrams side by side for a book resting on a desk. The first shows the forces on the book: weight, the pull of the Earth on the book, pointing down, and the normal force, the push of the desk on the book, pointing up. The second shows the push of the book on the desk, pointing down, in the same colour as the normal force. The third shows the pull of the book on the Earth, pointing up, in the same colour as the weight. Arrows of the same colour are equal in length and opposite in direction: each colour is one third-law pair, and its two forces act on different bodies. on the book on the desk on the Earth desk on book (normal force) Earth on book (weight) book on desk book on Earth other forces on the desk and the Earth not shown
Same colour, same pair. The normal force and the weight both act on the book, so they are not a pair.
Worked exampleA dictionary rests on a desk. A student says that the weight of the dictionary and the normal force on it form a Newton's third law pair. Explain why the student is wrong, and identify the third-law partner of each force.

Try it first, then reveal one step at a time.

  1. Test the pair: different bodies? same type?
Worked exampleTwo skaters stand at rest on smooth ice. Skater P has mass 52 kg\pu{52 kg} and skater Q has mass 78 kg\pu{78 kg}. P pushes Q with a force of 130 N\pu{130 N}. Friction is negligible. Taking the direction in which Q moves as positive, calculate the acceleration of P during the push.

Try it first, then reveal one step at a time.

  1. Third law: Q pushes P with an equal force, 130 N\pu{130 N}, in the opposite direction. So the force on P is −130 N\pu{-130 N}.
Check yourself
A rocket engine pushes exhaust gas backwards. What is the third-law partner of this force?
Check yourself
A truck collides head-on with a small car. During the collision, how does the force of the truck on the car compare with the force of the car on the truck?

Common mistakes

  • Drawing a "driving force" or "force of the throw" on a body nothing is pushing. Each force needs a second body acting on it now.
  • Arrows unlabelled or not touching the body. Start each on the body and name it: weight, not gravity.
  • Assuming FN=mgF_\text{N} = mg. Use the force components perpendicular to the surface; an angled pull, a slope or a vertical acceleration changes FNF_\text{N}.
  • Thinking a moving body needs a resultant force to keep moving. At constant velocity the resultant force is zero.
  • Calling the weight and the normal force a third-law pair. A pair acts on two different bodies and is the same type of force.

Exam tips

  • "Draw" a free-body diagram: arrows touching the body, standard labels, sensible relative lengths. Leave out forces the body exerts.
  • "Identify" a third-law pair by naming both bodies and the type of force: "the Earth pulls the ball down; the ball pulls the Earth up".
  • "Calculate" with F=maF = ma: write the resultant-force equation with numbers in, such as T−mg=maT - mg = ma. That line earns the method mark.
  • In Paper 1A, read "remains at rest" or "constant velocity" as "resultant force is zero", then balance the forces.

Key takeaways

Learn thisA force is an interaction between two bodies. A free-body diagram shows one body and only the forces on it, as labelled arrows starting on the body.
Learn thisResultant force: the vector sum of all forces. In 2D, resolve, add components, then F=Fx2+Fy2F = \sqrt{F_x^{2} + F_y^{2}}, tan⁡θ=FyFx\tan\theta = \frac{F_y}{F_x}.
Learn thisFirst law: zero resultant force exactly when the body stays at rest or moves at constant velocity (translational equilibrium). Forces then balance in every direction.
In bookletF=maF = ma
Learn thisSecond law: FF is the resultant force, and the acceleration is in its direction. For connected bodies with the same acceleration, treat the whole system first.
Learn thisThird law: a pair is equal in size, opposite in direction, the same type, and acts on two different bodies, so the pair never cancels.

Practise this

94 past-paper questions on Forces and dynamics in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Forces and dynamics →