Describing motion
In a minute
Motion is described by three quantities: , and . Velocity is how fast position changes; acceleration is how fast velocity changes. is a change in position, which is not the same as the travelled. Average values of velocity, and acceleration cover an interval; instantaneous values, from the of a tangent, belong to one moment.
You'll be able to
- Describe a body's motion using its position, velocity and acceleration, from a chosen origin and positive direction.
- Find a displacement as a change in position, and tell it apart from the distance travelled.
- Calculate average velocity, average speed and average acceleration as rates of change, with signs and units.
- Determine instantaneous velocity and acceleration from tangents to motion graphs, or from measurements over a short time.
- Explain why a change of direction at constant speed is an acceleration.
Before you start3 quick questions on what this builds on
Revise first: 6.1 Units, measurement and estimation and 6.2 Scalars and vectors
Position, displacement and distance
To describe how something moves, you need three things: where it is, how fast that is changing, and how fast the velocity itself is changing. These are position, velocity and acceleration.
Everything starts with where. Pick a fixed point, the origin, and a positive direction. Then a position is just a signed number on that line.
is a vector: and are different places, on opposite sides of the origin.
The symbol (delta) means "change in": final value minus initial value. A negative means the body ended up on the negative side of where it started.
only cares about the start and the end. counts every metre of the trip, including any doubling back.
The two are equal in size only when the body moves in a straight line and never turns back.
Try it first, then reveal one step at a time.
- Write each position with its sign: start , car park , end .
- Displacement uses only the start and the end: .
- So . The minus sign means the lift finished below where it started.
- Compare the distance: down plus up is . Distance is never negative and is at least the size of the displacement.
Try it first, then reveal one step at a time.
- Marking point 1: give the distance with its unit.
- Marking point 2: give the displacement.
- Marking point 3: link displacement to start and end positions, distance to the path.
- The distance she runs is 400 m, the length of the path. Her displacement is zero. Displacement is the change in position, and she ends at the same position as she started. Distance adds up the whole path, so it does not cancel when she comes back round.
Velocity and speed
Two cars can cover the same ground in very different times. To compare them you need a rate: how much changes per second.
Over a time interval , and have average values. They use different numerators, which is why they can differ.
Average velocity carries a sign or a direction. Average speed never does, and it is never smaller than the size of the average velocity.
Neither is in the data booklet: its kinematics section gives only the four equations for constant acceleration, which you meet in 1.2.
Try it first, then reveal one step at a time.
- Three lengths take her to the far end, back, and to the far end again. So her displacement is .
- Average velocity .
- Round to 2 significant figures, like the data. It is positive, so it points away from the shallow end.
- For comparison, the distance is , so her average speed is three times larger.
Try it first, then reveal one step at a time.
- Take north as positive and convert to metres: then .
- Displacement: , so north.
- Total time: .
- Average velocity north.
- Check with the average speed: . It is larger, as it must be, because the drone doubled back.
Your speedometer does not show an average. It shows the speed at that instant. Instantaneous values belong to one moment; the last section shows how to find them.
Acceleration
Velocity can change too. A sprinter leaving the blocks and a car braking at a junction both have changing velocities. The rate of that change is acceleration.
Here is the initial velocity and the final velocity. The unit means "metres per second, every second".
Velocity is a vector, so happens whenever its size or its direction changes. A car going round a bend at a steady speed is accelerating.
The sign of the acceleration alone does not tell you whether the body is slowing down. For motion along a line, compare it with the sign of the velocity: same sign, speeding up; opposite signs, slowing down.
Try it first, then reveal one step at a time.
- Take her direction of motion as positive: , , .
- Change in velocity: .
- Average acceleration .
- Sense check: she gains every second, and .
Try it first, then reveal one step at a time.
- State the signs: (towards the wall) and (away from it).
- Change in velocity: . It is not : the direction reversed.
- Average acceleration .
- So : directed away from the wall, while the ball is in contact.
Instantaneous values from graphs and measurements
An average covers an interval. Shrink the interval around one moment and the average gets closer and closer to a single value: the instantaneous value at that moment.
On a displacement–time graph, an average velocity is the of a chord, a straight line joining two points on the curve. As the two points move together, the chord becomes the tangent at that point.
Instantaneous speed is the size of the instantaneous velocity. On a straight-line graph the gradient is the same everywhere, so the average and instantaneous values are equal.
Try it first, then reveal one step at a time.
- Instantaneous velocity is the gradient of the tangent, so use two points on the tangent, not on the curve.
- Rise: . Run: .
- Gradient .
- Check: reading at that point would give the average from , not the value at .
In the laboratory you can measure an instantaneous speed directly. A light gate times how long a card of known length takes to pass. The interval is so short that the average over it is very close to the instantaneous value.
Try it first, then reveal one step at a time.
- Convert the card length: .
- Speed at A: . Speed at B: . Each is close to the instantaneous speed at that gate.
- Average acceleration .
- Keep the unrounded speeds until the end, then round to 2 significant figures.
Common mistakes
- Adding the legs of a trip to get the displacement. That is the distance; displacement is end position minus start position.
- Calling a negative acceleration "slowing down". It slows the body only when the velocity is positive; compare the two signs.
- Saying acceleration is just a change in speed. It is a change in velocity, so a change of direction at constant speed counts.
- Finding the velocity at a point on a curved – graph by dividing by . That is an average from ; use the gradient of the tangent.
- Forgetting to convert units. Change , , minutes and hours to metres and seconds before you divide.
Exam tips
- "State" a definition in Paper 2: velocity as the rate of change of position, never as "distance over time".
- "Calculate" with vectors: state your positive direction, then give the answer with its sign (or a direction) and its unit.
- "Outline the difference" between distance and displacement: one is a scalar along the path, the other a vector from start to end. Give both halves.
- "Determine" from a graph: draw a long tangent, show the two points you read, and quote the gradient with its unit.
Key takeaways
Practise this
74 past-paper questions on Kinematics and motion in the Physics HL bank, each with a mark scheme and a worked explanation.