2.3 · SLPaper 1Paper 2

Conduction and convection

In a minute

Whenever two places are at different , energy flows from the hotter to the colder. This happens by , and . You learn how the first two work at the particle level, and how to calculate the rate of conduction through a wall or rod.

You'll be able to

  • Name the three main mechanisms of thermal energy transfer and say what each one needs.
  • Explain conduction in terms of particles with more kinetic energy passing energy to particles with less.
  • Use ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x} to find a rate of conduction, a thickness or a temperature difference, and reason with its proportions.
  • Describe how density differences in a heated fluid set up a convection current.
Before you start3 quick questions on what this builds on
Check yourself
A straight-line graph of temperature against position passes through (0.10 m,64 ∘C)(0.10\ \text{m}, 64\,^{\circ}\text{C}) and (0.50 m,24 ∘C)(0.50\ \text{m}, 24\,^{\circ}\text{C}). Calculate its in ∘C m−1^{\circ}\text{C m}^{-1}.
Check yourself
A metal block warms from 17 ∘C17\,^{\circ}\text{C} to 46 ∘C46\,^{\circ}\text{C}. What is its change in temperature in kelvin?
Check yourself
A spoon at 70 ∘C70\,^{\circ}\text{C} is put into water at 20 ∘C20\,^{\circ}\text{C}. Which way is the net thermal energy transfer?

Revise first: 1.1 Describing motion, 2.1 Particles, density and temperature and 2.2 Internal energy, phase changes and specific heats

Three ways thermal energy moves

Put a pan of soup on a hob. The base heats the soup, the soup churns, and you feel warmth on your face. Three different processes are at work.

A happens whenever there is a difference, with the net flow from hotter to colder. There are three main mechanisms.

1. : energy passes from particle to particle by collisions, with no movement of the material. It is the main mechanism in solids.

2. : a warmed part of a liquid or gas moves, carrying its energy with it.

3. : every object emits electromagnetic waves, mostly infrared at everyday temperatures. They need no medium, so they cross a vacuum. You calculate radiated power in 2.4.

Conduction and convection need particles; radiation does not. Usually all three happen at once, and one dominates.

Worked exampleEnergy from the Sun crosses about 1.5×1011 m1.5 \times 10^{11}\ \text{m} of space to reach Earth. Explain why this energy cannot arrive by conduction or convection.

Try it first, then reveal one step at a time.

  1. Say what the space contains, what conduction and convection each need, and which mechanism needs neither.
Worked exampleA vacuum flask has a double glass wall with a near-vacuum between the layers, and the glass surfaces facing the gap are silvered. Explain how these features reduce thermal energy transfer out of a hot drink.

Try it first, then reveal one step at a time.

  1. Conduction and convection first: what do they need? Then radiation, which can still cross the gap.
Check yourself
Energy passes through a solid brick wall, and no part of the wall moves. Which mechanism carries the energy through the brick?
Check yourself
In which states of matter can convection happen?

Conduction: passing on kinetic energy

Hold one end of a metal rod in a flame. Soon the far end is too hot to hold, yet no metal has moved along the rod.

From 2.1, Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}T (a gas result that also fits solids): the hotter a material, the greater the average random of its particles. In a solid the particles vibrate about fixed positions, faster and further at the hot end.

These particles collide with neighbours that have less kinetic energy, and pass some of it on. The neighbours then do the same to the particles beyond them.

Particle model of conduction along a solid bar: particles at the hot left end vibrate with large amplitude, particles at the cold right end with small amplitude, and the net energy transfer is from left to right hot end cold end bar of a solid net transfer of thermal energy large vibrations: greater average kinetic energy small vibrations: less orange lines show how far each particle vibrates about its fixed position
Particles stay in place. Kinetic energy is handed on from particles with more to particles with less.

Collisions go both ways, but on average the faster particles lose energy and the slower ones gain it. So the net transfer is from hot to cold, until the average kinetic energy is the same everywhere: .

Metals have a second, faster route: free electrons. Electrons at the hot end gain kinetic energy, move quickly through the metal and collide with ions further along. This is why metals usually conduct far better than non-metals.

Particles in solids and liquids are close together, so collisions are frequent. Gas particles are far apart, so gases conduct poorly; trapped air in wool or foam insulates.

Worked exampleOne end of a copper rod stands in boiling water. Describe how thermal energy is conducted along the rod.

Try it first, then reveal one step at a time.

  1. Say what is different about the particles at the hot end, how they pass energy on, and the metal's extra route.
Worked exampleOne end of a steel bar is held at 450 K\pu{450 K} and the other end at 310 K\pu{310 K}. Calculate the difference between the average random kinetic energies of a particle at the two ends.

Try it first, then reveal one step at a time.

  1. Use Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}T with kB=1.38⋅10−23 J K−1k_\text{B} = \pu{1.38e-23 J K-1}, from the data booklet.
Check yourself
One end of a rod is at 640 K\pu{640 K} and the other at 320 K\pu{320 K}. What is the ratio of the average kinetic energy of a particle at the hot end to that at the cold end?
Check yourself
Why is still air a poor conductor of thermal energy?

The rate of conduction

A thin glass window loses energy far faster than a thick brick wall. Four things set the rate: the material, the area, the thickness and the temperature difference.

Picture a bar with insulated sides, one face held hot and the other cold. Once the temperatures stop changing, a graph of temperature against position along it is a straight line.

Top: a bar with insulated sides, its left face at the hot temperature and its right face at the cold temperature, length delta x and cross-sectional area A, with energy flowing left to right. Bottom: a graph of temperature against position along the bar, a straight line falling from the hot temperature to the cold temperature, whose negative gradient is the temperature gradient energy flow insulation on the sides hot face Thot cold face Tcold length Δx cross-sectional area A Thot Tcold 0 Δx position along the bar x / m temperature T / K straight line: gradient = ΔT/Δx, negative in the direction of energy flow
The steeper the temperature gradient, the faster energy is conducted.

Its ΔTΔx\frac{\Delta T}{\Delta x} is the temperature gradient, in K m−1\text{K m}^{-1}. The rate of conduction is given by this data booklet equation.

In the formula booklet
ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}

ΔQΔt\frac{\Delta Q}{\Delta t} is the rate of thermal energy transfer in W. AA is the cross-sectional area in m2\text{m}^{2}, Δx\Delta x the thickness in m, and ΔT\Delta T the temperature difference across it, in K or ∘C^{\circ}\text{C}.

is a property of the material. Rough values in W m−1 K−1\text{W m}^{-1}\,\text{K}^{-1}: copper 400, glass 1, brick 0.7, still air 0.025. A question gives you kk.

The minus sign: temperature falls along the direction of energy flow, so ΔTΔx\frac{\Delta T}{\Delta x} is negative and the rate comes out positive. In calculations, use the size of ΔT\Delta T.

So the rate is proportional to kk, AA and ΔT\Delta T, and inversely proportional to Δx\Delta x. Double the thickness and the rate halves.

Worked exampleA single-glazed window pane is 1.2 m\pu{1.2 m} by 0.85 m\pu{0.85 m} and 4.0 mm\pu{4.0 mm} thick. The glass has a thermal conductivity of 0.96 W m−1 K−1\pu{0.96 W m-1 K-1}. Its inner surface is at 14 ∘C14\,^{\circ}\text{C} and its outer surface at 6.0 ∘C6.0\,^{\circ}\text{C}. Calculate the rate of thermal energy transfer through the glass.

Try it first, then reveal one step at a time.

  1. Convert to SI units: A=1.2×0.85=1.02 m2A = 1.2 \times 0.85 = \pu{1.02 m2}, Δx=4.0⋅10−3 m\Delta x = \pu{4.0e-3 m}, ΔT=14−6.0=8.0 K\Delta T = 14 - 6.0 = \pu{8.0 K}.
Worked exampleThe walls of a cool box are made of polystyrene of thermal conductivity 0.033 W m−1 K−1\pu{0.033 W m-1 K-1}. Their total area is 0.62 m2\pu{0.62 m2}. The inside is kept at 3 ∘C3\,^{\circ}\text{C} on a day when the outside surface is at 31 ∘C31\,^{\circ}\text{C}. Determine the thickness of polystyrene needed so that energy enters by conduction at 12 W\pu{12 W}.

Try it first, then reveal one step at a time.

  1. Temperature difference: ΔT=31−3=28 K\Delta T = 31 - 3 = \pu{28 K}.
Check yourself
Rods X and Y are made of the same metal, with the same temperature difference between their ends. Y has twice the diameter and twice the length of X. What is rate along Yrate along X\frac{\text{rate along Y}}{\text{rate along X}}?
Check yourself
The copper base of a pan has an area of 0.018 m2\pu{0.018 m2} and is 3.0 mm\pu{3.0 mm} thick. Copper has k=390 W m−1 K−1k = \pu{390 W m-1 K-1}. Energy passes through the base at 2.5 kW\pu{2.5 kW}. Calculate the temperature difference across the base, in K to 2 significant figures.

Convection: fluids on the move

Hold your hand above a candle flame and it soon feels hot. Hold it the same distance to the side and it barely warms.

When part of a fluid is heated, its particles move faster and usually spread further apart, so it expands. The same mass takes up more volume, so by ρ=mV\rho = \frac{m}{V} its falls.

The surrounding denser fluid pushes it up: the upward force on it is bigger than its weight. Cooler, denser fluid sinks to take its place.

Away from the heat source, the risen fluid cools, becomes denser, sinks and flows back to be heated again. This loop is a convection current, and the moving fluid carries energy with it.

Convection current in a room: air warmed by a heater near the floor on the left rises, flows across under the ceiling, cools and sinks beside a cold window on the right, and returns along the floor to the heater heater cold window warm air expands, becomes less dense and rises warm air spreads under the ceiling air cools, becomes denser and sinks cool, dense air flows back along the floor
A current carries energy from the heater round the whole room.

Convection only happens in fluids. It is why heaters go near the floor and a fridge's cooling unit near the top: the current then reaches the whole space.

Worked exampleAt the bottom of a pan, 0.360 kg\pu{0.360 kg} of water fills 3.60⋅10−4 m3\pu{3.60e-4 m3}. Heated, it expands to 3.64⋅10−4 m3\pu{3.64e-4 m3}. Calculate its new density, and state what it does if the water above it is at about 1000 kg m−3\pu{1000 kg m-3}.

Try it first, then reveal one step at a time.

  1. The mass does not change when it expands, so ρ=mV=0.3603.64×10−4=989.0 kg m−3\rho = \dfrac{m}{V} = \dfrac{0.360}{3.64 \times 10^{-4}} = \pu{989.0 kg m-3}.
Worked exampleA room has a heater near the floor on one side and a cold window on the other. Explain how convection transfers thermal energy from the heater to the rest of the room.

Try it first, then reveal one step at a time.

  1. Follow one parcel of air round the room, linking its temperature to its density and its density to its motion.
Check yourself
Why is the cooling unit placed near the top of a fridge?
Check yourself
A parcel of air of mass 1.20 kg\pu{1.20 kg} fills 1.00 m3\pu{1.00 m3}. It is warmed by a sunny car park and expands to 1.11 m3\pu{1.11 m3}. Calculate its new density, in kg m−3\text{kg m}^{-3} to 3 significant figures.

Common mistakes

  • Describing conduction as just "energy passing on". Say that particles with more kinetic energy collide with neighbours and transfer kinetic energy, and mention free electrons for a metal.
  • Leaving thicknesses in mm or cm in ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}. Convert to metres first, or the rate is 100 or 1000 times too small.
  • Using one temperature instead of the difference across the material. ΔT\Delta T is hot face minus cold face, the same in K or °C.
  • Forgetting that a rod's area goes as its diameter squared. Twice the diameter means four times the rate for the same length.

Exam tips

  • "Describe" conduction: one point per sentence, covering more kinetic energy at the hot end, collisions with neighbours, kinetic energy transferred, and free electrons in a metal.
  • "Calculate" a rate: write the equation, substitute in SI units, then give the answer in W to the significant figures of the data.
  • "Explain" a convection current: link temperature to density, density to rising or sinking, and close the loop back to the heat source.

Key takeaways

In bookletΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}
Learn thisThe three main mechanisms are conduction, convection and thermal radiation. Conduction and convection need particles; radiation crosses a vacuum.
Learn thisConduction: particles with more kinetic energy collide with neighbours and pass it on, with no bulk movement. Metals also conduct by free electrons.
Learn thisOnce temperatures are steady, the rate of conduction is proportional to kk, AA and ΔT\Delta T and inversely proportional to the thickness Δx\Delta x, in metres.
Learn thisConvection: heated fluid usually expands, its density falls and it rises; cooler, denser fluid sinks. It happens only in liquids and gases.

Practise this

86 past-paper questions on Thermal concepts and energy transfer in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Thermal concepts and energy transfer →