1.6 · SLPaper 1Paper 2

Momentum and impulse

In a minute

is mass times , p=mvp = mv, a . A acting for a time gives an , J=FΔtJ = F\Delta t, which equals the change in momentum. With no resultant external , a system is an and its total momentum stays constant: this is .

You'll be able to

  • Calculate momentum, p=mvp = mv, and changes in momentum, keeping track of direction with signs.
  • Calculate an impulse from J=FΔtJ = F\Delta t or from the area under a force-time graph.
  • Use impulse = change in momentum to find average forces and final velocities, and explain why a longer contact time means a smaller force.
  • Use as F=ΔpΔtF = \frac{\Delta p}{\Delta t} when mass changes, and explain why F=maF = ma fails there.
  • Apply conservation of momentum to one-dimensional collisions and recoils, and state when it holds.
Before you start3 quick questions on what this builds on
Check yourself
A resultant force of 2.1 N\pu{2.1 N} acts on a trolley of mass 0.75 kg\pu{0.75 kg}. What is its , in m s−2\pu{m s-2}? Give 2 significant figures.
Check yourself
A puck slides right at 4.5 m s−1\pu{4.5 m s-1} and rebounds left at 3.5 m s−1\pu{3.5 m s-1}. Taking right as positive, what is its change in velocity, in m s−1\pu{m s-1}? Include the sign.
Check yourself
Which of these quantities has a direction as well as a size?

Revise first: 1.1 Describing motion, 1.4 Newton's laws and free-body diagrams and 6.2 Scalars and vectors

Linear momentum

A slow lorry and a fast cricket ball are both hard to stop: one has a large mass, the other a large . Momentum combines the two.

In the formula booklet
p=mvp = mv

mm is the mass in kg and vv the velocity in m s−1\pu{m s-1}. This equation is printed in the data booklet, and so are J=FΔtJ = F\Delta t and F=ΔpΔtF = \frac{\Delta p}{\Delta t} later in this lesson.

Choose a positive direction first: a body moving the other way has negative momentum. The change in momentum is Δp=mv−mu\Delta p = mv - mu, where uu is the initial velocity.

Worked exampleA bowling ball of mass 6.4 kg\pu{6.4 kg} rolls along a lane at 3.5 m s−1\pu{3.5 m s-1}. Calculate its momentum.

Try it first, then reveal one step at a time.

  1. Use p=mvp = mv with the mass in kg and the velocity in m s−1\pu{m s-1}.
Worked exampleA football of mass 0.27 kg\pu{0.27 kg} hits a wall at 11 m s−1\pu{11 m s-1} and rebounds along the same line at 8.0 m s−1\pu{8.0 m s-1}. Calculate the change in momentum of the ball. Take the direction towards the wall as positive.

Try it first, then reveal one step at a time.

  1. Before: u=+11 m s−1u = \pu{+11 m s-1}. After, it moves away from the wall: v=−8.0 m s−1v = \pu{-8.0 m s-1}.
Check yourself
A cricket ball moving at 38 m s−1\pu{38 m s-1} has a momentum of 6.2 kg m s−1\pu{6.2 kg m s-1}. What is its mass, in kg? Give 2 significant figures.
Check yourself
A ball of mass mm hits the floor vertically at speed vv and bounces straight back up at the same speed vv. What is the size of its change in momentum?

Impulse and change in momentum

Catch a hard ball with stiff arms and it stings. Pull your hands back, and it doesn't. The ball loses the same momentum either way; only the time changes.

Start from F=maF = ma for a body of constant mass, with a=v−uΔta = \frac{v - u}{\Delta t}. Multiply both sides by Δt\Delta t: FΔt=mv−muF\Delta t = mv - mu. A force acting for a time changes momentum.

In the formula booklet
J=FΔtJ = F\Delta t

FF is the average in N, and Δt\Delta t is the time of contact in s. Since 1 N=1 kg m s−2\pu{1 N} = \pu{1 kg m s-2}, 1 N s=1 kg m s−1\pu{1 N s} = \pu{1 kg m s-1}: impulse and momentum have the same unit.

When the force varies, the impulse is the the force-time graph, and FF in J=FΔtJ = F\Delta t is the average force.

Graph of force in newtons against time in milliseconds for a push on a trolley. The force rises in a straight line from 0 at time 0 to 36 newtons at 50 milliseconds, stays at 36 newtons until 150 milliseconds, then falls in a straight line to 0 at 200 milliseconds. The area under the line is shaded and split into a left triangle of area 0.90 newton seconds, a middle rectangle of area 3.6 newton seconds and a right triangle of area 0.90 newton seconds. force F / N time t / ms 0 50 100 150 200 36 0.90 N s 3.6 N s 0.90 N s
The shaded area is the impulse, 5.4 N s\pu{5.4 N s}. Convert milliseconds to seconds before you multiply.
Worked exampleA trolley of mass 1.5 kg\pu{1.5 kg} is at rest on a smooth, level track. It is pushed, and the force on it varies with time as shown in the graph above. Determine the speed of the trolley after the push.

Try it first, then reveal one step at a time.

  1. The impulse is the area under the graph. Change the times to seconds: 50 ms=0.050 s\pu{50 ms} = \pu{0.050 s}, 100 ms=0.10 s\pu{100 ms} = \pu{0.10 s}.
Worked exampleA goalkeeper catches a ball of mass 0.430 kg\pu{0.430 kg} travelling at 25.0 m s−1\pu{25.0 m s-1} and brings it to rest in 0.0600 s\pu{0.0600 s}. Determine the size of the average force her hands exert on the ball.

Try it first, then reveal one step at a time.

  1. Take the ball's direction of travel as positive. Δp=0−0.430×25.0=−10.75 kg m s−1\Delta p = 0 - 0.430 \times 25.0 = \pu{-10.75 kg m s-1}.
Worked exampleExplain, in terms of impulse, why an airbag reduces the average force on a driver's head in a crash.

Try it first, then reveal one step at a time.

  1. Fix the change in momentum first: same start speed, same end speed.
Check yourself
Which unit is the same as the newton second, N s\pu{N s}?
Check yourself
A racket exerts an average force of 380 N\pu{380 N} on a tennis ball for 4.5 ms\pu{4.5 ms}. What impulse does the ball receive, in N s\pu{N s}? Give 2 significant figures.

Force as rate of change of momentum

In 1.4 you used F=maF = ma. Newton's second law is more general: the resultant force equals the rate of change of momentum.

In the formula booklet
F=ma=ΔpΔtF = ma = \frac{\Delta p}{\Delta t}

If the mass stays constant, Δp=mΔv\Delta p = m\Delta v. Then ΔpΔt=mΔvΔt=ma\frac{\Delta p}{\Delta t} = m\frac{\Delta v}{\Delta t} = ma. So F=maF = ma is the special case for a body whose mass does not change.

On a momentum-time graph, the is ΔpΔt\frac{\Delta p}{\Delta t}, so it equals the resultant force.

Some systems gain or lose mass as they move: a rocket burning fuel, a water jet, sand dropping onto a belt. Then F=maF = ma fails. Use F=ΔpΔtF = \frac{\Delta p}{\Delta t}.

For a steady stream, a mass ΔmΔt\frac{\Delta m}{\Delta t} arrives each second, and each kilogram changes velocity by Δv\Delta v. So the force needed is:

Learn this
F=ΔmΔt ΔvF = \frac{\Delta m}{\Delta t}\,\Delta v
Worked exampleA hose sprays water horizontally at a wall at 14 m s−1\pu{14 m s-1}. Water hits the wall at a rate of 1.8 kg s−1\pu{1.8 kg s-1} and runs down it without bouncing back. Calculate the horizontal force the water exerts on the wall.

Try it first, then reveal one step at a time.

  1. Take the direction towards the wall as positive. Each second, 1.8 kg\pu{1.8 kg} of water goes from +14 m s−1\pu{+14 m s-1} to 0 horizontally.
Worked exampleGrain falls vertically onto a horizontal conveyor belt at a rate of 45 kg s−1\pu{45 kg s-1}. The belt moves at a constant 0.80 m s−1\pu{0.80 m s-1}. Ignore friction in the belt's rollers. Determine the extra horizontal force the motor must supply because of the grain.

Try it first, then reveal one step at a time.

  1. The grain lands with no horizontal velocity. The belt must bring each kilogram up to 0.80 m s−1\pu{0.80 m s-1}.
Check yourself
Why can F=maF = ma not be used with one value of mm for a rocket during launch?
Check yourself
A small rocket engine throws out exhaust gas at 2.6 kg s−1\pu{2.6 kg s-1}, at a speed of 1900 m s−1\pu{1900 m s-1} relative to the rocket. What force does the gas exert on the rocket, in kN? Give 2 significant figures.

Conservation of momentum

Two skaters stand still on smooth ice and push each other apart. Before the push, the total momentum is zero. After it, they glide off in opposite directions.

By Newton's third law, each pushes the other with an equal and opposite force, for the same time. So their impulses are equal and opposite, and their changes in momentum cancel. The total is still zero.

Internal forces come in third-law pairs inside the system, so they cancel. Only a resultant external force gives the system an impulse and changes its total momentum.

Momentum is conserved in every collision and of an isolated system, whether the bodies bounce, stick together or fly apart. is often not conserved: that is in 1.7.

In a short collision, outside forces such as friction are tiny next to the contact forces, so momentum is conserved to a good approximation.

1. Choose a positive direction and draw before and after.

2. Write total momentum before = total momentum after, with signs.

3. Solve. The sign of the answer gives the direction.

Two diagrams of railway wagons on a straight track, with an arrow at the top marking right as the positive direction. Before: wagon A, mass 18 000 kilograms, on the left, moving right at 2.4 metres per second; wagon B, mass 12 000 kilograms, on the right, moving left at 0.90 metres per second, towards A. After: the two wagons are coupled together, total mass 30 000 kilograms, moving with an unknown velocity v marked to the right. positive Before After A 18 000 kg B 12 000 kg 2.4 m s⁻¹ 0.90 m s⁻¹ A B 30 000 kg in total v ?
Before and after the wagons couple. Right is positive, so wagon B starts with negative momentum.
Worked exampleWagon A, of mass 18000 kg\pu{18000 kg}, moves at 2.4 m s−1\pu{2.4 m s-1} to the right. It meets wagon B, of mass 12000 kg\pu{12000 kg}, moving at 0.90 m s−1\pu{0.90 m s-1} to the left, and the two couple together. Friction is negligible. Calculate the velocity of the wagons just after they couple.

Try it first, then reveal one step at a time.

  1. Take right as positive. Wagon B's velocity is −0.90 m s−1\pu{-0.90 m s-1}.
Worked exampleA dropped apple speeds up as it falls, so its momentum increases. Explain why this does not break the law of conservation of momentum.

Try it first, then reveal one step at a time.

  1. Is the apple on its own an isolated system?
Check yourself
Two trolleys at rest on a smooth track have a compressed spring between them. The spring is released and they move apart. Which statement is correct just after they separate?
Check yourself
A lump of putty of mass 0.20 kg\pu{0.20 kg}, moving at 6.5 m s−1\pu{6.5 m s-1}, hits a stationary trolley of mass 0.45 kg\pu{0.45 kg} and sticks to it. What is their speed just after the impact, in m s−1\pu{m s-1}? Give 2 significant figures.

Common mistakes

  • Subtracting speeds when a body rebounds. Give the two velocities opposite signs: a reversal gives a bigger change in momentum.
  • Saying momentum is conserved with no condition. It holds only when no resultant external force acts on the system.
  • Reading a force-time graph in milliseconds and not converting. Change ms to s first, or the impulse is 1000 times too big.
  • Assuming kinetic energy is conserved because momentum is. Momentum is conserved in every collision of an isolated system; kinetic energy usually is not.

Exam tips

  • "State" the law of conservation of momentum with its condition: "the total momentum of a system is constant if no resultant external force acts". The condition carries the mark.
  • "Calculate" a velocity after a collision: state your positive direction, then write momentum before = momentum after with numbers in. That line earns the method mark.
  • "Explain" why a longer contact time reduces a force: same change in momentum, so same impulse; longer time, so smaller average force. Arguments about energy earn nothing here.
  • In Paper 1A, N s and kg m s⁻¹ are the same unit, so impulse and momentum values compare directly.

Key takeaways

In bookletp=mvp = mv
Learn thisMomentum is a vector, unit kg m s−1\pu{kg m s-1}. Change in momentum Δp=mv−mu\Delta p = mv - mu: choose a positive direction and keep the signs.
In bookletJ=FΔtJ = F\Delta t
Learn thisImpulse = change in momentum = area under the resultant force-time graph. 1 N s=1 kg m s−1\pu{1 N s} = \pu{1 kg m s-1}. Same Δp\Delta p over a longer time means a smaller average force.
In bookletF=ma=ΔpΔtF = ma = \frac{\Delta p}{\Delta t}
Learn thisF=maF = ma needs constant mass. When mass changes (rockets, jets, belts), use F=ΔpΔtF = \frac{\Delta p}{\Delta t}; for a steady stream, F=ΔmΔt ΔvF = \frac{\Delta m}{\Delta t}\,\Delta v.
Learn thisThe total momentum of a system is constant unless a resultant external force acts on it. This holds in every collision and explosion of an isolated system.

Practise this

47 past-paper questions on Momentum, impulse and collisions in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Momentum, impulse and collisions →