1.17 · AHL · HL onlyPaper 1Paper 2

Time dilation, length contraction and simultaneity

In a minute

A clock moving relative to you runs slow, and a moving object is shorter along its motion: , Δt=γΔt0\Delta t = \gamma\Delta t_0, and , L=L0γL = \frac{L_0}{\gamma}. Observers in relative motion can also disagree about whether two separated events happen at the same time: depends on the frame.

You'll be able to

  • Identify which observer measures the between two events and the of an object.
  • Use Δt=γΔt0\Delta t = \gamma\Delta t_0 to find a dilated time interval or a proper time interval.
  • Use L=L0γL = \frac{L_0}{\gamma} to find a contracted length, and say which lengths contract.
  • Explain why two events that are simultaneous in one frame need not be simultaneous in another, and find which happens first.
Before you start3 quick questions on what this builds on
Check yourself
Which of these describes an ?
Check yourself
Calculate the γ\gamma for a of 0.30c0.30c. Give 3 significant figures.
Check yourself
An astronaut flies towards a lamp at a high constant speed. What speed does she measure for the lamp's light?

Revise first: 1.1 Describing motion, 1.15 Reference frames and Galilean relativity, 1.16 The postulates of special relativity and Lorentz transformations and 3.3 Travelling waves

Proper time and proper length

In special relativity, observers in different can measure different times between the same two events, and different lengths for the same object. So say whose measurement you mean.

For a pair of events, one frame is often special: the frame where both happen at the same place. There, one clock at that place can time both. This frame exists when something slower than light could be present at both events.

This is not always the observer who seems to be moving. Find the frame where the two events share a position.

Worked exampleA high-speed train passes through a station at constant . A passenger in her seat pours a cup of tea. Identify who measures the proper time interval for the pouring, and who measures the proper length of the platform. Explain your answers.

Try it first, then reveal one step at a time.

  1. The events are the start and end of pouring. Find the frame where both are at the same place.
Worked exampleA probe leaves space station D and travels at constant velocity to space station A, which is at rest relative to D. Explain why a clock on the probe, and not the clocks on the stations, measures the proper time interval between the probe leaving D and the probe arriving at A.

Try it first, then reveal one step at a time.

  1. Locate both events in the probe's frame, then in the stations' frame, and compare.
Check yourself
A guard on a platform starts a stopwatch as the front of a fast train passes her, and stops it as the back passes her. Who measures the proper time interval between these two events?
Check yourself
A rocket flies past a space station at constant velocity. Who measures the proper length of the rocket?

Time dilation

Picture a light clock: a light pulse bouncing between two mirrors a distance dd apart. In the clock's own frame, one tick is a path of 2d2d, straight up and back.

Seen moving past you, the mirrors shift while the light travels, so its path zigzags and is longer. By the , it still travels at the , cc. So each tick takes longer.

A light clock seen from two frames. Left panel, the clock's own frame: two horizontal mirrors a distance d apart, one above the other. A pulse of light goes straight up from the lower mirror to the upper mirror and straight back down, so one tick is a path of length 2 d. Right panel, a frame in which the clock moves to the right at speed v: the clock is drawn at three positions. The light leaves the lower mirror at the first position, meets the upper mirror at the second position and returns to the lower mirror at the third position, so it follows a longer zigzag path. The light still travels at speed c, so each tick takes longer in this frame. clock's own frame d one tick: path 2d frame in which the clock moves c c v one tick: longer zigzag path, same speed c so each tick takes longer
Each tick takes longer for an observer who sees the clock move. You don't need to derive the equation.
In the formula booklet
Δt=γ Δt0\Delta t = \gamma\,\Delta t_0

Δt0\Delta t_0 is the proper time interval. Δt\Delta t is the interval in a frame moving at vv relative to the frame where the events share a place.

γ=11−v2c2\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}} is the . Both equations, and c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1}, are in the data booklet. For v=0.920cv = 0.920c, put 0.9200.920 in for vc\frac{v}{c}.

Worked exampleA charged kaon has a mean lifetime of 1.24⋅10−8 s\pu{1.24e-8 s}, measured in a frame where it is at rest. In a laboratory beam, kaons move at 0.920c0.920c. Calculate their mean lifetime in the laboratory frame.

Try it first, then reveal one step at a time.

  1. The kaon is created and decays at one place in its rest frame, so Δt0=1.24⋅10−8 s\Delta t_0 = \pu{1.24e-8 s} is proper.
Worked exampleA spacecraft travels at a constant 0.850c0.850c from Earth to a star. In Earth's frame the star is at rest and 6.00 ly\pu{6.00 ly} away. Determine the time the journey takes according to a clock on board the spacecraft, in years.

Try it first, then reveal one step at a time.

  1. Earth's frame: light covers 1 ly\pu{1 ly} per year, so the spacecraft covers 0.850 ly\pu{0.850 ly} per year: Δt=6.000.850=7.059\Delta t = \frac{6.00}{0.850} = 7.059 years.
Check yourself
A lamp on a rocket stays on for 2.00 s\pu{2.00 s} by the crew's clock. The rocket moves at 0.960c0.960c relative to a space station. For how long, in s, is the lamp on in the station's frame? Give 3 significant figures.
Check yourself
Rockets P and Q pass each other at a high constant relative speed. Each crew compares the other's clocks with its own. Which is correct?

Length contraction

Back to the star trip. The crew's clock shows 3.72 years, and they see the star approach at 0.850c0.850c. So in their frame the journey is only 0.850×3.72=3.16 ly0.850 \times 3.72 = \pu{3.16 ly}, not 6.00 ly\pu{6.00 ly}.

Distances along the motion are shorter for an observer who sees them moving: .

In the formula booklet
L=L0γL = \frac{L_0}{\gamma}

L0L_0 is the , measured in the object's rest frame. LL is the length measured in a frame where the object moves at speed vv along that length.

To measure a moving object, you mark both ends at the same instant in your frame. As the next section shows, "the same instant" depends on the frame.

Worked exampleA spacecraft is 85.0 m\pu{85.0 m} long when measured by its crew. It flies past a space station at 0.920c0.920c, moving along its length. Calculate the length of the spacecraft measured from the station.

Try it first, then reveal one step at a time.

  1. The spacecraft is at rest in the crew's frame, so L0=85.0 mL_0 = \pu{85.0 m} is its proper length.
Worked exampleFor the spacecraft travelling at 0.850c0.850c to a star 6.00 ly\pu{6.00 ly} from Earth (in Earth's frame), calculate the Earth–star distance measured by the crew. Show that it gives the same journey time as before.

Try it first, then reveal one step at a time.

  1. Earth and the star are at rest in Earth's frame, so L0=6.00 lyL_0 = \pu{6.00 ly} is the proper length.
Check yourself
A rod has a proper length of 2.50 m\pu{2.50 m}. It moves along its length at 0.960c0.960c relative to a laboratory. What length, in m, does the laboratory measure? Give 3 significant figures.
Check yourself
A cube-shaped probe moves at 0.90c0.90c relative to an observer, parallel to one of its edges. Which statement describes the observer's measurements?

The relativity of simultaneity

In Galilean relativity t′=tt' = t, so every observer agrees on which events happen at the same time (1.15). Special relativity removes that agreement.

A lamp flashes at the centre of a spaceship cabin with a light sensor at each end. In the cabin's frame the light travels equal distances at cc, so it reaches both sensors together.

From a space station, the cabin moves forwards. The light still travels at cc both ways, but the rear sensor moves towards the flash point and the front sensor moves away.

A lamp flashes at the centre of a spaceship cabin, with a light sensor at each end. Top panel, the cabin's frame: the cabin is at rest, and two light arrows of equal length, each labelled c, go from the lamp to the rear sensor on the left and the front sensor on the right. Both sensors are reached at the same time. Bottom panel, the space station's frame, a short time after the flash: the cabin moves to the right at speed v. A dashed outline shows where the cabin was when the lamp flashed, and a cross marks the point where the flash happened. The two light arrows from the cross are still equal in length, because light travels at c both ways. The rear sensor has moved towards the cross and has already been reached. The front sensor has moved away and has not been reached yet. cabin's frame c c rear sensor front sensor both sensors reached at the same time space station's frame v c c rear sensor: reached first front sensor: not reached yet cross: where the flash happened
Simultaneous in the cabin's frame; rear sensor first in the station's frame.

The t′=γ(t−vxc2)t' = \gamma\left(t - \frac{vx}{c^2}\right) gives the size of the effect. Apply it to two events and subtract:

Learn this
Δt′=γ(Δt−v Δxc2)\Delta t' = \gamma\left(\Delta t - \frac{v\,\Delta x}{c^2}\right)

If Δt=0\Delta t = 0 but Δx≠0\Delta x \ne 0, then Δt′=−γv Δxc2\Delta t' = -\frac{\gamma v\,\Delta x}{c^2}, which is not zero. Take +x+x as the direction in which frame S′S' moves. Then of two events simultaneous in SS, the one further along +x+x, ahead of the moving observer, happens first in S′S'.

Worked exampleIn the cabin above, the sensors register the flash together in the cabin's frame. Explain why, for an observer on the space station, the rear sensor registers it first.

Try it first, then reveal one step at a time.

  1. Give the second postulate, then how each sensor moves, then the shorter path, then conclude.
Worked exampleTwo beacons on a straight test track are 1.20 km\pu{1.20 km} apart: P at x=0x = 0 and Q at x=+1.20 kmx = \pu{+1.20 km}. In the track's frame they flash at the same instant. A probe flies along the track in the +x+x direction at 0.850c0.850c. Determine tQ′−tP′t'_\text{Q} - t'_\text{P}, the time between the flashes in the probe's frame, and state which beacon flashes first.

Try it first, then reveal one step at a time.

  1. Take +x+x along the probe's motion. Then v=+0.850cv = +0.850c, Δx=xQ−xP=+1.20⋅103 m\Delta x = x_\text{Q} - x_\text{P} = \pu{+1.20e3 m} and Δt=0\Delta t = 0.
Check yourself
Two events happen at the same place and at the same time in frame SS. Frame S′S' moves at 0.70c0.70c relative to SS. In S′S', the two events are
Check yourself
Lightning strikes both ends of a long platform at the same instant in the platform's frame. A train passes through, moving east. In the train's frame, which strike happens first?

Common mistakes

  • Saying the observer "at rest" measures the proper time. It is the frame where both events happen at the same place, which may be the platform, not the train.
  • Multiplying when you should divide. The proper time interval is the shortest and the proper length the longest: check your answer against that.
  • Contracting lengths at right angles to the motion. Only the length along the relative velocity changes.
  • Thinking only one observer really moves. Each inertial observer measures the other's clocks running slow.

Exam tips

  • "Define" proper time interval or proper length: name the frame, where the events happen at the same place or where the object is at rest. "The real length" scores nothing.
  • In "calculate" or "determine" questions, say which quantity is proper, show γ\gamma, substitute into the equation, then give the answer with its unit.
  • "Explain" a simultaneity result: light travels at cc for both observers, say how the receivers move, then conclude which event is first in which frame.
  • In Paper 1A, reject options with Δt<Δt0\Delta t < \Delta t_0 or L>L0L > L_0: γ\gamma is never less than 1.

Key takeaways

Learn thisProper time interval Δt0\Delta t_0: measured in the frame where both events happen at the same place. It is the shortest.
Learn thisProper length L0L_0: measured in the frame where the object is at rest. It is the longest.
In bookletΔt=γ Δt0\Delta t = \gamma\,\Delta t_0
In bookletL=L0γL = \frac{L_0}{\gamma}
Learn thisOnly lengths along the motion contract. Each of two observers measures the other's clocks running slow.
Learn thisEvents simultaneous in one frame and separated along the relative motion are not simultaneous in a frame moving relative to it. The event ahead of the moving observer happens first for that observer.

Practise this

89 past-paper questions on Special relativity and spacetime in the Physics HL bank, each with a mark scheme and a worked explanation.

Practise Special relativity and spacetime →