Work and energy transfer
In a minute
is never created or destroyed, only moved around: that is , and a draws it. A that moves a body does on it, , which is a transfer of energy. The work done by the equals the change in the body's kinetic energy.
You'll be able to
- State the principle of conservation of energy and use it to account for every joule in a process.
- Draw and read Sankey diagrams, using arrow widths to find energies.
- Calculate the work done by a force with , including zero and negative work, and from the a graph of force against .
- Use the work done by the resultant force to find changes in kinetic energy and speed.
- Explain changes in mechanical energy in terms of the work done by , air resistance and other non-conservative forces.
Before you start3 quick questions on what this builds on
Revise first: 1.1 Describing motion, 1.2 Equations of motion and motion graphs, 1.4 Newton's laws and free-body diagrams, 1.5 Contact and field forces and 6.2 Scalars and vectors
Energy and its conservation
A phone battery runs down, a ball slows to a stop, a kettle boils. In each case something has been passed on or changed form. Physics tracks it with one quantity: energy.
Energy comes in several forms. A moving body has . A raised body has . A stretched spring has .
Others include the of hot objects, chemical energy in fuels and food, and energy carried by electric currents, light and sound. You meet the equations for kinetic and potential energy in 1.10.
Energy often seems to vanish. It has usually spread into the surroundings as thermal energy, warming the air, the floor or the machine a little. This spread-out energy is hard to use again, so we say it is dissipated. It is not destroyed.
So to account for energy, list every place it goes. The energy in must equal the total of all the energies out.
Try it first, then reveal one step at a time.
- By conservation of energy, energy in = total energy out.
- .
- .
- Check: , so every joule is accounted for.
Try it first, then reveal one step at a time.
- Ask where the ball's energy goes during the bounce.
- Then say what that means for the total energy of the ball and its surroundings.
- The ball's energy is not destroyed in the bounce. During the impact, some of its kinetic energy is transferred to the ball and the floor as thermal energy, and to the air as sound. So the ball leaves the floor with less kinetic energy than it arrived with, and cannot rise as high. The total energy of the ball and its surroundings stays the same.
Sankey diagrams
A list of energies is hard to take in at a glance. A Sankey diagram draws each transfer as an arrow, so you see at once where most of the energy goes.
1. The input arrow enters from the left. Its width shows the total energy supplied.
2. The useful output carries straight on. Each wasted output branches off, usually curving downwards.
3. The output widths add up to the input width. That is conservation of energy, drawn as a picture.
To draw one to scale, pick a scale such as for , then make every arrow the matching width. To read one, measure the widths and use the scale.
Try it first, then reveal one step at a time.
- Read the labelled arrows: input , useful , thermal .
- The outputs must add up to the input: .
- .
- Check against the widths: the sound arrow is about a fifth as wide as the thermal arrow, and .
Try it first, then reveal one step at a time.
- Find the scale: for each millimetre.
- Wasted energy: .
- The rest goes to the water: .
- The widths are given to 2 significant figures, so give 2.
Work done by a force
Push a trolley along a corridor and it speeds up: energy has gone from you to the trolley. Push harder, or for longer, and more energy goes across. This transfer by a is called work.
is the size of the force in N, is the size of the displacement in m, and is the angle between the force and the displacement. is in joules: . This equation is printed in the data booklet.
Why ? Split the force into a component along the displacement and at right angles to it. Only the component along the line of motion transfers energy.
The angle decides the sign of the work:
1. : the work is positive. The force gives the body energy.
2. : , so no work is done. The on a body sliding across a level floor does no work.
3. : the work is negative. The force takes energy from the body. Friction on a body sliding over a fixed surface acts at , so it does work .
Try it first, then reveal one step at a time.
- The displacement is horizontal and the rope is at to it, so .
- .
- . The data have 3 significant figures, so give 3.
- Check: the answer is less than , as it must be when the rope is not along the motion.
If the force changes as the body moves, no longer works with a single value of . Plot the force component along the motion against distance. The work done is the that force-distance graph.
Try it first, then reveal one step at a time.
- The work is the area under the graph. Split it into a rectangle and a triangle.
- Rectangle, from 0 to : .
- Triangle, from to : .
- Total: .
Work and the change in energy
Several forces may act on a body at once. Add up the work each one does, and you get the work done by the . Where does that energy end up?
Take a constant resultant force on a body of mass , along its displacement . By Newton's second law, . From the equations of motion, , so .
Multiply by : . The quantity is the body's kinetic energy, . So the work done by the resultant force has gone into kinetic energy.
Positive net work speeds a body up, negative net work slows it down, and zero net work leaves its speed unchanged. More generally, the net work done on any system shows up as an equal change in that system's energy.
Try it first, then reveal one step at a time.
- Work done by the resultant force: .
- This equals the gain in kinetic energy, and the puck starts at rest: .
- .
- Give 2 significant figures, like the data.
Gravity and spring forces are conservative forces: the work done against them is stored as potential energy and can be fully got back. Friction, air resistance and pushes from people or motors are non-conservative forces.
Kinetic plus potential energy is the of a system. Only non-conservative forces change it.
Friction on a sliding body and air resistance do negative work, so they reduce the mechanical energy. The lost mechanical energy becomes thermal energy in the surroundings. For a body falling or sliding through a height , its weight does work , with from the data booklet.
Try it first, then reveal one step at a time.
- Three forces act: weight, the normal force and friction. The normal force is at right angles to the slide, so it does no work.
- Work done by the weight: its component along the slide times the length, which equals .
- Gain in kinetic energy: .
- Net work = change in kinetic energy: , so . Friction removed of mechanical energy.
- Friction acts along the whole , opposite the motion: . Give 2 significant figures.
Try it first, then reveal one step at a time.
- What is the resultant force at constant speed, and so the net work?
- Which force does positive work, which does negative work, and where does the energy go?
- At constant speed the resultant force on her is zero, so the resultant force does no work and her kinetic energy does not change. Her weight does positive work as she falls, equal to her loss of gravitational potential energy. Air resistance acts upwards, opposite her displacement, so it does an equal amount of negative work. Air resistance is a non-conservative force, so her mechanical energy decreases. That energy is transferred to the air as thermal energy.
Common mistakes
- Writing that energy is “lost” or “used up”. Energy is conserved: name where it went, usually thermal energy in the surroundings.
- Taking as the angle to the wrong line. It is the angle between the force and the displacement, so a force along the motion has and .
- Treating the work done by one force as the change in kinetic energy. Add the work of every force, or use the resultant force, before setting it equal to .
- Forgetting the sign of the work done by friction or air resistance. On a sliding or falling body they act against the motion, so their work is negative and they remove mechanical energy.
- Taking the normal force on a slope as equal to the weight. If nothing else pushes into the slope, it is for a slope at angle to the horizontal; this matters when you find friction from .
- Writing “gravity” for the force that does work on a falling body. Name the force: the weight of the body.
Exam tips
- “State” the principle of conservation of energy in full: energy cannot be created or destroyed, only transferred or transformed. “Energy is conserved” on its own is too vague.
- “Calculate” work: write with the numbers in, including the angle, then the answer with J. Check is measured from the displacement.
- “Explain” an energy change: name each force, say whether its work is positive, negative or zero, and say where the energy ends up.
- In Paper 1A, the area under a force-distance graph is work, and the output widths of a Sankey diagram add up to the input width.
Key takeaways
Practise this
62 past-paper questions on Work, energy and power in the Physics HL bank, each with a mark scheme and a worked explanation.