IB Physics notes › Cheat sheet

IB Physics cheat sheet

BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.

IB Physics

IB PHYSICS · HL
pastpaperprep.com/revision-notes

1 Space, time and motion

1.1Describing motion

Displacement is the change in position, s=xfinal−xinitials = x_\text{final} - x_\text{initial}, a vector. Distance is the total path length, a scalar.LEARN
Velocity measures how fast position changes; acceleration measures how fast velocity changes. Both are vectors.LEARN
Average velocity =displacementtime= \frac{\text{displacement}}{\text{time}}; average speed =distancetime= \frac{\text{distance}}{\text{time}}; average acceleration =ΔvΔt= \frac{\Delta v}{\Delta t}.LEARN
Instantaneous values are gradients of tangents: on an ss–tt graph for velocity, on a vv–tt graph for acceleration. Chords give averages.LEARN
Changing direction at constant speed is acceleration. Along a line, same sign for vv and aa: speeding up; opposite signs: slowing down.LEARN

1.2Equations of motion and motion graphs

s=(u+v)t2v=u+ats=ut+12at2v2=u2+2ass = \frac{(u+v)t}{2} \qquad v = u + at \qquad s = ut + \tfrac{1}{2}at^{2} \qquad v^{2} = u^{2} + 2asBOOKLET
The equations of motion hold only while the acceleration is uniform. Use them along one line at a time, and split a journey into stages if aa changes. Each leaves out one of ss, uu, vv, aa, tt.LEARN
State a positive direction first. Displacement, velocity and acceleration carry signs; up positive means a=−ga = -g.LEARN
Free fall: g=9.8 m s−2g = \pu{9.8 m s-2} downwards (data booklet), the same for every body when air resistance is negligible. At the top of a vertical throw v=0v = 0 but a=ga = g.LEARN
Gradient of displacement–time = velocity; gradient of velocity–time = acceleration; area under velocity–time = displacement; area under acceleration–time = change in velocity.LEARN
Non-uniform acceleration: curved velocity–time graph, no suvat. Use a tangent for the gradient, and squares or trapezia for the area.LEARN

1.3Projectile motion

No fluid resistance: horizontally uxu_x is constant and sx=uxts_x = u_x t; vertically the acceleration is gg down. Only tt links them.LEARN
Resolve first: ux=ucos⁡θu_x = u\cos\theta, uy=usin⁡θu_y = u\sin\theta. Combine at the end: v=vx2+vy2v = \sqrt{v_x^{2} + v_y^{2}}, tan⁡ϕ=vyvx\tan\phi = \frac{v_y}{v_x}.LEARN
No fluid resistance: the path is a parabola. Velocity is along the tangent; acceleration is gg straight down at every point, including the top, where vy=0v_y = 0.LEARN
Fluid resistance opposes velocity: lower maximum height, shorter range, decreasing horizontal velocity, acceleration not constant, steeper descent.LEARN
Terminal speed: fluid resistance (plus upthrust) equals weight, so the resultant force and acceleration are zero.LEARN

1.4Newton's laws and free-body diagrams

A force is an interaction between two bodies. A free-body diagram shows one body and only the forces on it, as labelled arrows starting on the body.LEARN
Resultant force: the vector sum of all forces. In 2D, resolve, add components, then F=Fx2+Fy2F = \sqrt{F_x^{2} + F_y^{2}}, tan⁡θ=FyFx\tan\theta = \frac{F_y}{F_x}.LEARN
First law: zero resultant force exactly when the body stays at rest or moves at constant velocity (translational equilibrium). Forces then balance in every direction.LEARN
F=maF = maBOOKLET
Second law: FF is the resultant force, and the acceleration is in its direction. For connected bodies with the same acceleration, treat the whole system first.LEARN
Third law: a pair is equal in size, opposite in direction, the same type, and acts on two different bodies, so the pair never cancels.LEARN

1.5Contact and field forces

Normal force FNF_\text{N}: perpendicular to the surface, and not always mgmg. On a slope with no other perpendicular forces, FN=mgcos⁡θF_\text{N} = mg\cos\theta.LEARN
Ff≤μsFNFf=μdFNF_\text{f} \le \mu_\text{s} F_\text{N} \qquad F_\text{f} = \mu_\text{d} F_\text{N}BOOKLET
FH=−kxF_\text{H} = -kxBOOKLET
Fd=6πηrvF_\text{d} = 6\pi\eta r vBOOKLET
Fb=ρVgF_\text{b} = \rho V gBOOKLET
Fg=mgF_\text{g} = mgBOOKLET
Drag: small sphere moving slowly. Buoyancy: ρ\rho of the fluid, VV displaced. A sphere falling at terminal speed: Fd+Fb=WF_\text{d} + F_\text{b} = W. For a bubble rising at terminal speed, drag acts down: Fb=W+FdF_\text{b} = W + F_\text{d}.LEARN
Electric force: on any charge, moving or not. Magnetic force: only on moving charges or currents, perpendicular to the velocity and the field.LEARN

1.6Momentum and impulse

p=mvp = mvBOOKLET
Momentum is a vector, unit kg m s−1\pu{kg m s-1}. Change in momentum Δp=mv−mu\Delta p = mv - mu: choose a positive direction and keep the signs.LEARN
J=FΔtJ = F\Delta tBOOKLET
Impulse = change in momentum = area under the resultant force-time graph. 1 N s=1 kg m s−1\pu{1 N s} = \pu{1 kg m s-1}. Same Δp\Delta p over a longer time means a smaller average force.LEARN
F=ma=ΔpΔtF = ma = \frac{\Delta p}{\Delta t}BOOKLET
F=maF = ma needs constant mass. When mass changes (rockets, jets, belts), use F=ΔpΔtF = \frac{\Delta p}{\Delta t}; for a steady stream, F=ΔmΔt ΔvF = \frac{\Delta m}{\Delta t}\,\Delta v.LEARN
The total momentum of a system is constant unless a resultant external force acts on it. This holds in every collision and explosion of an isolated system.LEARN

1.7Collisions and explosions

With no resultant external force, total momentum is conserved in every collision and explosion: m1u1+m2u2=m1v1+m2v2m_1u_1 + m_2u_2 = m_1v_1 + m_2v_2, with signs for direction.LEARN
Elastic: total EkE_\text{k} unchanged. Inelastic: total EkE_\text{k} decreases, transferred to internal energy, sound and deformation. Sticking together loses the most.LEARN
Elastic, head-on: relative speed of separation equals relative speed of approach.LEARN
Explosion from rest: momenta equal and opposite, m1v1=−m2v2m_1v_1 = -m_2v_2. Total EkE_\text{k} increases from stored energy, and by Ek=p22mE_\text{k} = \frac{p^{2}}{2m} the lighter piece gets more.LEARN
Two dimensions: conserve the xx and yy components of momentum separately, then combine.LEARN

1.8Circular motion

T=1fT = \frac{1}{f}, and the angular velocity is ω=2πT=2πf\omega = \frac{2\pi}{T} = 2\pi f, in rad s−1\pu{rad s-1}.LEARN
v=2πrT=ωrv = \frac{2\pi r}{T} = \omega rBOOKLET
Constant speed in a circle is still acceleration: the direction of the velocity changes. The acceleration points towards the centre of the circle.LEARN
a=v2r=ω2r=4π2rT2a = \frac{v^{2}}{r} = \omega^{2}r = \frac{4\pi^{2}r}{T^{2}}BOOKLET
Centripetal force F=mv2r=mω2rF = \frac{mv^{2}}{r} = m\omega^{2}r is provided by real forces: their resultant at constant speed, or its component towards the centre if the speed changes. It is perpendicular to the velocity, so it changes direction, not speed, and does no work.LEARN
Vertical circle on a string, towards the centre positive: bottom FT−mg=mv2rF_\text{T} - mg = \frac{mv^{2}}{r}; top FT+mg=mv2rF_\text{T} + mg = \frac{mv^{2}}{r}. Minimum speed at the top: gr\sqrt{gr}.LEARN

1.9Work and energy transfer

Conservation of energy: energy cannot be created or destroyed, only transferred or transformed. Energy that seems lost has been dissipated, usually as thermal energy in the surroundings.LEARN
In a Sankey diagram, arrow width is proportional to energy (or power). The output widths add up to the input width; wasted energy branches off.LEARN
W=Fscos⁡θW = Fs\cos\thetaBOOKLET
Work done by a force is energy transferred, in J. θ\theta is the angle between force and displacement: positive work for θ<90∘\theta < 90^{\circ}, none at 90∘90^{\circ}, negative above. For a varying force, work = area under the graph of the force along the motion against distance.LEARN
Wnet=ΔEk=12mv2−12mu2W_\text{net} = \Delta E_\text{k} = \tfrac{1}{2}mv^{2} - \tfrac{1}{2}mu^{2}LEARN
Change in mechanical energy = work done by non-conservative forces (friction, air resistance, pushes). Friction on a body sliding over a fixed surface, and air resistance, do negative work and turn mechanical energy into thermal energy.LEARN

1.10Mechanical energy

Ek=12mv2=p22mE_\text{k} = \tfrac{1}{2}mv^{2} = \frac{p^{2}}{2m}BOOKLET
ΔEp=mgΔh\Delta E_\text{p} = mg\Delta hBOOKLET
EH=12k(Δx)2E_\text{H} = \tfrac{1}{2}k(\Delta x)^{2}BOOKLET
Mechanical energy = kinetic + gravitational potential + elastic potential energy. Δh\Delta h is vertical, and mgΔhmg\Delta h holds only near Earth's surface.LEARN
Mechanical energy is conserved when only weight and spring forces do work (no friction, air resistance or driving force): their work equals the energy transformed between forms.LEARN
Change in mechanical energy = work done by non-conservative forces. A constant resistive force FF over a path dd removes FdFd, as internal energy.LEARN

1.11Power, efficiency and energy density

P=ΔWΔt=FvP = \frac{\Delta W}{\Delta t} = FvBOOKLET
Power is the rate of doing work or transferring energy, in watts: 1 W=1 J s−1\pu{1 W} = \pu{1 J s-1}. In P=FvP = Fv, FF is the force along the motion; at constant velocity the driving force equals the total resistive force.LEARN
η=useful work outtotal work in=useful power outtotal power in\eta = \frac{\text{useful work out}}{\text{total work in}} = \frac{\text{useful power out}}{\text{total power in}}BOOKLET
Efficiency has no unit and is always less than 1 for a real machine. Wasted energy is dissipated, mostly as thermal energy: in moving machines, through work done against friction and other resistive forces.LEARN
Energy density = energy released per unit volume of fuel, in J m−3\pu{J m-3}. Specific energy = energy released per unit mass, in J kg−1\pu{J kg-1}. Energy density = specific energy ×\times density.LEARN

1.12 ◆Torque and rotational equilibrium

τ=Frsin⁡θ\tau = Fr\sin\thetaBOOKLET
rsin⁡θr\sin\theta is the perpendicular distance from the axis to the line of action. Torque is in N m; always give its sense, clockwise or anticlockwise.LEARN
Rotational equilibrium: resultant torque zero, so clockwise torques = anticlockwise torques. A body at rest also needs zero resultant force.LEARN
Take the weight of an extended body as acting at its centre of mass: the midpoint of a uniform beam.LEARN
An unbalanced torque gives a rigid body an angular acceleration in the sense of the resultant torque. A force through the axis has no torque.LEARN

1.13 ◆Rotational motion and moment of inertia

Angular displacement Δθ\Delta\theta (rad), angular velocity ω=ΔθΔt\omega = \frac{\Delta\theta}{\Delta t} (rad s−1\pu{rad s-1}) and angular acceleration α=ΔωΔt\alpha = \frac{\Delta\omega}{\Delta t} (rad s−2\pu{rad s-2}). Choose a positive sense and give each a sign.LEARN
Rolling without slipping (for the axle), or a point at radius rr (along its path): s=rθs = r\theta, v=ωrv = \omega r, a=αra = \alpha r.LEARN
Δθ=ωf+ωi2tωf=ωi+αtΔθ=ωit+12αt2ωf2=ωi2+2αΔθ\Delta\theta = \frac{\omega_\text{f} + \omega_\text{i}}{2}t \qquad \omega_\text{f} = \omega_\text{i} + \alpha t \qquad \Delta\theta = \omega_\text{i}t + \frac{1}{2}\alpha t^{2} \qquad \omega_\text{f}^{2} = \omega_\text{i}^{2} + 2\alpha\Delta\thetaBOOKLET
The four angular equations of motion hold only for constant angular acceleration. Work in radians and rad s−1\pu{rad s-1}, as v=ωrv = \omega r and τ=Iα\tau = I\alpha need them.LEARN
I=∑mr2τ=IαI = \sum mr^{2} \qquad \tau = I\alphaBOOKLET
Moment of inertia depends on the mass and on how it is spread about the chosen axis: mass further from the axis gives a larger II. τ\tau in τ=Iα\tau = I\alpha is the resultant torque, including any resistive torque.LEARN

1.14 ◆Angular momentum and rotational kinetic energy

L=IωL = I\omegaBOOKLET
ΔL=τΔt=Δ(Iω)\Delta L = \tau\Delta t = \Delta(I\omega)BOOKLET
Ek=12Iω2=L22IE_\text{k} = \frac{1}{2}I\omega^{2} = \frac{L^{2}}{2I}BOOKLET
With no resultant external torque, angular momentum is conserved: I1ω1=I2ω2I_{1}\omega_{1} = I_{2}\omega_{2}. Lower II means higher ω\omega.LEARN
The area under a resultant torque–time graph is the angular impulse, ΔL\Delta L. Units: N m s = kg m2 s−1\text{kg m}^{2}\ \text{s}^{-1}; ω\omega in rad s−1\text{rad s}^{-1}.LEARN
Conserved LL does not mean conserved kinetic energy: pulling mass inwards raises EkE_\text{k}; coupling two bodies that turn at different rates lowers it.LEARN
Rolling without slipping: v=ωRv = \omega R, and total Ek=12mv2+12Iω2E_\text{k} = \frac{1}{2}mv^{2} + \frac{1}{2}I\omega^{2}.LEARN

1.15 ◆Reference frames and Galilean relativity

A reference frame is a set of axes and clocks. An event has coordinates (x,t)(x, t) in each frame.LEARN
An inertial reference frame is not accelerating, and Newton's first law holds in it. Any frame at constant velocity relative to an inertial frame is inertial.LEARN
Galilean relativity: Newton's laws are the same in all inertial frames. All inertial observers measure the same time and the same acceleration.LEARN
x′=x−vtx' = x - vtBOOKLET
t′=tt' = tBOOKLET
u′=u−vu' = u - vBOOKLET
vv is the velocity of frame S′S' relative to SS. Fix a positive direction first. Galilean velocity addition fails for speeds close to cc.LEARN

1.16 ◆The postulates of special relativity and Lorentz transformations

The postulates: (1) the laws of physics are the same in every inertial frame; (2) every inertial observer measures light in a vacuum at cc, whatever the motion of the source or observer.LEARN
γ=11−v2c2x′=γ(x−vt)t′=γ(t−vxc2)\gamma = \frac{1}{\sqrt{1 - \frac{v^{2}}{c^{2}}}} \qquad x' = \gamma(x - vt) \qquad t' = \gamma\left(t - \frac{vx}{c^{2}}\right)BOOKLET
γ≥1\gamma \ge 1, and γ=1\gamma = 1 only when v=0v = 0. When v≪cv \ll c, the Lorentz transformation reduces to the Galilean x′=x−vtx' = x - vt, t′=tt' = t.LEARN
u′=u−v1−uvc2u' = \frac{u - v}{1 - \frac{uv}{c^{2}}}BOOKLET
In velocity addition, uu is the object's velocity in S and vv is the velocity of S′ relative to S, each with a sign. For any object slower than light, the result is below cc.LEARN
(Δs)2=(cΔt)2−(Δx)2(\Delta s)^{2} = (c\Delta t)^{2} - (\Delta x)^{2}BOOKLET
Δt\Delta t and Δx\Delta x depend on the frame, but Δs\Delta s is invariant. Events linked by a light signal have Δs=0\Delta s = 0.LEARN

1.17 ◆Time dilation, length contraction and simultaneity

Proper time interval Δt0\Delta t_0: measured in the frame where both events happen at the same place. It is the shortest.LEARN
Proper length L0L_0: measured in the frame where the object is at rest. It is the longest.LEARN
Δt=γ Δt0\Delta t = \gamma\,\Delta t_0BOOKLET
L=L0γL = \frac{L_0}{\gamma}BOOKLET
Only lengths along the motion contract. Each of two observers measures the other's clocks running slow.LEARN
Events simultaneous in one frame and separated along the relative motion are not simultaneous in a frame moving relative to it. The event ahead of the moving observer happens first for that observer.LEARN

1.18 ◆Space–time diagrams and muon decay

A space–time diagram plots ctct against xx, same scale, for one inertial frame. Points are events; histories are world lines.LEARN
At rest: vertical world line. Light: 45∘45^{\circ}. Constant velocity v<cv < c: straight and steeper than light.LEARN
tan⁡θ=vc\tan\theta = \frac{v}{c}BOOKLET
Frame S′ at speed vv: ct′ct' leans θ\theta from ctct; x′x' leans θ\theta up from xx. Lines parallel to x′x' join events simultaneous in S′.LEARN
Lines of constant interval, (ct)2−x2=constant(ct)^2 - x^2 = \text{constant}, set the primed scales. On the ct′ct' axis, ct=γ ct′ct = \gamma\,ct'.LEARN
Far more muons reach sea level than classical physics predicts. Earth frame: lifetime dilated to γΔt0\gamma\Delta t_0. Muon frame: atmosphere contracted to L0/γL_0/\gamma.LEARN

Which method when

Straight-line motion → constant acceleration: use the equation of motion that leaves out the quantity you neither know nor want; changing acceleration or a curved graph: use tangent gradients and areas instead (1.2)LEARN
Projectile launched horizontally or at an angle, air resistance negligible → resolve uu and treat horizontal (constant uxu_x) and vertical (acceleration gg down) motion separately; the time comes from the vertical (1.3)LEARN
Forces on one body → draw the free-body diagram; if it is at rest or at constant velocity the forces balance in each direction, otherwise resultant force =ma= ma along the acceleration (1.4)LEARN
Average force in an impact, or a force–time graph → impulse = change in momentum, FΔt=ΔpF\Delta t = \Delta p, with the impulse as the area under the graph (1.6)LEARN
Collision or explosion along a line with no resultant external force → total momentum before = after, with signs; then compare total EkE_\text{k} to call it elastic or inelastic (1.7)LEARN
Body moving in a circle → find the real forces; their resultant towards the centre equals mv2r\frac{mv^{2}}{r}; at the top or bottom of a vertical circle, forces towards the centre minus forces away =mv2r= \frac{mv^{2}}{r} (1.8)LEARN
Speed after a drop on a curved track, a slide or a spring launch → energy, not the equations of motion: 12mv2\tfrac{1}{2}mv^{2}, mgΔhmg\Delta h, 12k(Δx)2\tfrac{1}{2}k(\Delta x)^{2}, plus the work done by friction if it acts (1.10)LEARN

◆Which method when

Collision or explosion at an angle → conserve the xx and yy components of momentum separately, then combine with Pythagoras (1.7)LEARN
Beam or shelf in balance with two unknown support forces → take torques about one support, so its force drops out, to find the other; then use force balance (upward forces = downward forces) for the first; put the beam's weight at its centre of mass (1.12)LEARN
Drum on a frictionless axle, turned by a rope with a hanging load → write mg−T=mamg - T = ma for the load (down positive) and Tr=IαTr = I\alpha for the drum, linked by a=αra = \alpha r (1.13)LEARN
Spinning body pulls its mass in, or two discs on one axle start turning together, with no resultant external torque → conserve angular momentum, I1ω1=I2ω2I_{1}\omega_{1} = I_{2}\omega_{2}, then find each EkE_\text{k} with its own II (1.14)LEARN
Velocity of one fast object seen from another, near cc → relativistic velocity addition u′=u−v1−uv/c2u' = \frac{u - v}{1 - uv/c^{2}}, with signs on uu and vv; the answer stays below cc (1.16)LEARN
Who measures the shorter time or the longer length → proper time is in the frame where both events happen at the same place (Δt=γΔt0\Delta t = \gamma\Delta t_0); proper length is in the object's rest frame (L=L0/γL = L_0/\gamma) (1.17)LEARN

2 The particulate nature of matter

2.1Particles, density and temperature

ρ=mV\rho = \frac{m}{V}BOOKLET
Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}TBOOKLET
Solid: close, fixed positions, vibrating. Liquid: close, sliding past each other. Gas: far apart, fast and random, negligible forces except in collisions.LEARN
TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273. A temperature change has the same value in K and in ∘C^{\circ}\text{C}.LEARN
Use kelvin whenever a temperature is multiplied, divided or put in a ratio.LEARN
1 cm3=10−6 m3\pu{1 cm3} = 10^{-6}\ \text{m}^{3}, so 1 g cm−3=1000 kg m−3\pu{1 g cm-3} = \pu{1000 kg m-3}.LEARN
Kelvin temperature measures the average random kinetic energy per particle, whatever the particle's mass.LEARN

2.2Internal energy, phase changes and specific heats

Q=mcΔTQ = mc\Delta TBOOKLET
Q=mLQ = mLBOOKLET
Internal energy = total random kinetic energy of the particles + total intermolecular potential energy.LEARN
Net thermal energy transfer goes from higher to lower temperature until thermal equilibrium, whatever the internal energies.LEARN
During a phase change of a pure substance, temperature and average random kinetic energy are constant; intermolecular potential energy changes.LEARN
ΔT\Delta T is the same in K and °C; actual temperatures convert with TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.LEARN
Insulated mixing, ignoring the container: energy lost by the hot body = energy gained by the cold body.LEARN

2.3Conduction and convection

ΔQΔt=−kAΔTΔx\frac{\Delta Q}{\Delta t} = -kA\frac{\Delta T}{\Delta x}BOOKLET
The three main mechanisms are conduction, convection and thermal radiation. Conduction and convection need particles; radiation crosses a vacuum.LEARN
Conduction: particles with more kinetic energy collide with neighbours and pass it on, with no bulk movement. Metals also conduct by free electrons.LEARN
Once temperatures are steady, the rate of conduction is proportional to kk, AA and ΔT\Delta T and inversely proportional to the thickness Δx\Delta x, in metres.LEARN
Convection: heated fluid usually expands, its density falls and it rises; cooler, denser fluid sinks. It happens only in liquids and gases.LEARN

2.4Thermal radiation and black bodies

L=σAT4L = \sigma A T^{4}BOOKLET
b=L4πd2b = \frac{L}{4\pi d^{2}}BOOKLET
λmaxT=2.9×10−3 m K\lambda_\text{max} T = 2.9 \times 10^{-3}\ \text{m K}BOOKLET
Use absolute temperature in every radiation law: TT in K =θ= \theta in ∘C+273^{\circ}\text{C} + 273.LEARN
A spherical black body of radius RR has A=4πR2A = 4\pi R^{2}, so L=4πR2σT4L = 4\pi R^{2}\sigma T^{4}.LEARN
A black body emits a continuous spectrum. Hotter means more intensity at every wavelength and a shorter peak wavelength.LEARN
For a source radiating equally in all directions, with no absorption on the way, brightness falls as 1d2\frac{1}{d^{2}}: double the distance and the brightness falls to a quarter.LEARN

2.5Emissivity, albedo and Earth's energy balance

emissivity=power radiated per unit areaσT4\text{emissivity} = \frac{\text{power radiated per unit area}}{\sigma T^{4}}BOOKLET
albedo=total scattered powertotal incident power\text{albedo} = \frac{\text{total scattered power}}{\text{total incident power}}BOOKLET
Emissivity and albedo are ratios with no unit, each between 0 and 1. An opaque surface or a whole planet absorbs a fraction 1−α1 - \alpha of the incident power.LEARN
Earth's albedo, about 0.3, varies daily with cloud cover and is higher at high latitude, where ice and snow cover the surface.LEARN
The mean incoming intensity over a planet's surface is S4\frac{S}{4}: power is caught by a disc of area πR2\pi R^{2} and shared over 4πR24\pi R^{2}. For Earth, S=1.36⋅103 W m−2S = \pu{1.36e3 W m-2} (data booklet).LEARN
(1−α)S4=eσT4(1 - \alpha)\frac{S}{4} = e\sigma T^{4}LEARN
Surface in equilibrium, losing energy only by radiation: absorbed solar intensity + intensity radiated down by the atmosphere = intensity the surface radiates.LEARN

2.6Greenhouse gases and the greenhouse effect

The four main greenhouse gases are HX2O\ce{H2O}, COX2\ce{CO2}, CHX4\ce{CH4} and NX2O\ce{N2O}, each with natural and human sources.LEARN
Sunlight peaks in the visible and mostly passes through; Earth radiates infrared (peak near 10 μm10\ \mu\text{m}), much of which greenhouse gases absorb.LEARN
E=hfE = hfBOOKLET
Energy levels: a photon is absorbed only if hfhf equals a gap between vibrational levels; re-emission goes in all directions.LEARN
Resonance: the wave's electric field drives the molecule; it absorbs strongly at a natural frequency f0f_0, where ΔE=hf0\Delta E = hf_0.LEARN
The natural greenhouse effect warms Earth from about 255 K to 288 K. The enhanced effect is extra human-caused warming; burning fossil fuels is the primary cause.LEARN

2.7Pressure, amount of substance and the ideal gas model

P=FAP = \frac{F}{A}BOOKLET
n=NNAn = \frac{N}{N_\text{A}}BOOKLET
PVT=constant\frac{PV}{T} = \text{constant}BOOKLET
Pressure uses only the force perpendicular to the surface; 1 Pa=1 N m−2\pu{1 Pa} = \pu{1 N m-2}.LEARN
Fixed amount of gas: PVPV constant at constant TT; VT\frac{V}{T} constant at constant PP; PT\frac{P}{T} constant at constant VV; TT in kelvin.LEARN
Ideal gas: point molecules in random motion, no intermolecular forces except in collisions, elastic collisions. Its internal energy is all random kinetic energy.LEARN
Pressure comes from molecules changing momentum as they hit the walls: faster or more frequent hits mean higher pressure.LEARN
pV diagram: constant volume is vertical, constant pressure is horizontal, constant temperature is an isotherm curve.LEARN

2.8The ideal gas equations and the kinetic model

PV=nRT=NkBTPV = nRT = Nk_\text{B}TBOOKLET
In gas equations TT is in kelvin, VV in m³ and PP in Pa. R=NAkB=8.31 J mol−1 K−1R = N_\text{A}k_\text{B} = \pu{8.31 J mol-1 K-1} (data booklet).LEARN
On a pressure–volume diagram, an isotherm is a curve with PVPV constant; hotter isotherms lie further from the origin. Vertical lines are constant volume, horizontal lines constant pressure.LEARN
P=13ρv2P = \frac{1}{3}\rho v^{2}BOOKLET
Pressure comes from the rate of change of momentum of molecules colliding with the walls. At constant volume, hotter molecules hit harder and more often; compressed gas at constant temperature hits each unit area more often.LEARN
U=32NkBT=32RnTU = \frac{3}{2}Nk_\text{B}T = \frac{3}{2}RnTBOOKLET
A real gas is close to ideal at low pressure, low density and high temperature (well above its condensation point).LEARN

2.9 ◆The first law of thermodynamics

Q=ΔU+WQ = \Delta U + WBOOKLET
Sign convention: Q>0Q > 0 when thermal energy is supplied to the system; W>0W > 0 when the system does work (expands), W<0W < 0 when work is done on it (compressed).LEARN
A closed system exchanges energy but not mass with its surroundings. An isolated system exchanges neither, so its ΔU=0\Delta U = 0.LEARN
W=PΔVW = P\Delta VBOOKLET
When the pressure changes, the work done is the area under the pressure–volume graph: positive for an expansion, negative for a compression.LEARN
ΔU=32nRΔT=32NkBΔT\Delta U = \frac{3}{2}nR\Delta T = \frac{3}{2}Nk_\text{B}\Delta TBOOKLET
Constant volume: W=0W = 0, so Q=ΔUQ = \Delta U. Ideal gas at constant temperature: ΔU=0\Delta U = 0, so Q=WQ = W.LEARN

2.10 ◆Entropy and the second law

Entropy SS measures the disorder of the particles in a system, in J K−1\text{J K}^{-1}. For the same substance, gas > liquid > solid; heating raises it.LEARN
ΔS=ΔQT\Delta S = \frac{\Delta Q}{T}BOOKLET
In ΔS=ΔQT\Delta S = \frac{\Delta Q}{T}, TT is constant and in kelvin. ΔQ\Delta Q is positive into the system and negative out of it.LEARN
S=kBln⁡ΩS = k_\text{B}\ln\OmegaBOOKLET
In an isolated system all microstates are equally likely, so the macrostate with the most microstates is the most probable and has the highest entropy.LEARN
Second law: the total entropy of an isolated system never decreases. Real processes are irreversible, so it increases. Clausius: thermal energy cannot flow by itself from cold to hot. Kelvin: no cyclic engine turns all the heat from one reservoir into work.LEARN
A system that is not isolated can lose entropy, but its surroundings gain at least as much: ΔSsystem+ΔSsurroundings≥0\Delta S_\text{system} + \Delta S_\text{surroundings} \ge 0.LEARN

2.11 ◆Gas processes and heat engines

In Q=ΔU+WQ = \Delta U + W, QQ is the heat supplied to the gas and WW is the work done by the gas. Work done on the gas (compression) is negative.LEARN
For an ideal gas. Isovolumetric: W=0W = 0, Q=ΔUQ = \Delta U. Isobaric: W=PΔVW = P\Delta V. Isothermal: ΔU=0\Delta U = 0, Q=WQ = W. Adiabatic: Q=0Q = 0, W=−ΔUW = -\Delta U.LEARN
PV53=constantPV^{\frac{5}{3}} = \text{constant}BOOKLET
Work done by a gas is the area under its P-V line, negative when the gas is compressed. Over a cycle, the net work is the enclosed area, done by the gas when the loop runs clockwise.LEARN
η=useful workinput energy\eta = \frac{\text{useful work}}{\text{input energy}}BOOKLET
For a heat engine, W=Qh−QcW = Q_\text{h} - Q_\text{c}, and the input energy is QhQ_\text{h}, the heat taken in.LEARN
ηCarnot=1−TcTh\eta_\text{Carnot} = 1 - \frac{T_\text{c}}{T_\text{h}}BOOKLET
The Carnot efficiency, with temperatures in kelvin, is the maximum for any heat engine between two reservoirs. Real engines are irreversible and always less efficient.LEARN

2.12Current, potential difference and emf

I=ΔqΔtI = \frac{\Delta q}{\Delta t}BOOKLET
V=WqV = \frac{W}{q}BOOKLET
1 A=1 C s−1\pu{1 A} = \pu{1 C s-1}, 1 V=1 J C−1\pu{1 V} = \pu{1 J C-1} and 1 A h=3600 C\pu{1 A h} = \pu{3600 C}. Electron charge: −e-e, with e=1.60⋅10−19 Ce = \pu{1.60e-19 C}.LEARN
Emf ε\varepsilon: energy transferred to electrical energy per unit charge by a source. Pd: electrical energy transferred to other forms per unit charge between two points. Terminal pd equals ε\varepsilon only when no current flows.LEARN
Conventional current flows from + to − outside the source; electrons in a metal drift the other way. Charge is never used up.LEARN
Ammeter in series (ideal: zero resistance). Voltmeter in parallel (ideal: infinite resistance).LEARN
Chemical cell: chemical to electrical, portable, limited store. Solar cell: light to electrical, renewable, no emissions, no output in the dark.LEARN

2.13Resistance, resistivity and Ohm's law

R=VIR = \frac{V}{I}BOOKLET
ρ=RAL\rho = \frac{RA}{L}BOOKLET
Conductors have many mobile charge carriers (free electrons in metals, ions in solutions); insulators have very few.LEARN
Resistance comes from carriers colliding with vibrating lattice ions. The collisions heat a resistor, and a hotter metal has a larger resistance.LEARN
Resistivity, in Ω m\Omega\ \text{m}, belongs to the material; for a round wire use A=πr2A = \pi r^{2} with rr in metres.LEARN
Ohm's law: for a metal conductor, I∝VI \propto V at constant temperature. Ohmic means a straight I–V line through the origin.LEARN
A filament lamp is non-ohmic: its resistance rises as it heats. At any point, R=VIR = \frac{V}{I}, not the gradient.LEARN

2.14Electrical power and circuits

P=IV=I2R=V2RP = IV = I^{2}R = \frac{V^{2}}{R}BOOKLET
Series: I=I1=I2=…V=V1+V2+…Rs=R1+R2+…\text{Series: } I = I_{1} = I_{2} = \dots \qquad V = V_{1} + V_{2} + \dots \qquad R_\text{s} = R_{1} + R_{2} + \dotsBOOKLET
Parallel: I=I1+I2+…V=V1=V2=…1Rp=1R1+1R2+…\text{Parallel: } I = I_{1} + I_{2} + \dots \qquad V = V_{1} = V_{2} = \dots \qquad \frac{1}{R_\text{p}} = \frac{1}{R_{1}} + \frac{1}{R_{2}} + \dotsBOOKLET
Resistors in parallel combine to less than the smallest of them. An ideal ammeter has zero resistance; an ideal voltmeter has infinite resistance.LEARN
ε=I(R+r)\varepsilon = I(R + r)BOOKLET
Terminal pd V=ε−IrV = \varepsilon - Ir. It equals the emf only when no current flows, and falls as the current rises.LEARN
NTC thermistor: resistance falls as temperature rises. LDR: resistance falls as light intensity rises. Potential divider: Vout=Vin R2R1+R2V_\text{out} = V_\text{in}\,\frac{R_2}{R_1 + R_2}; a potentiometer gives any output from zero to VinV_\text{in}.LEARN

Which method when

Any ratio or product with a temperature in it (Ek=32kBTE_\text{k} = \frac{3}{2}k_\text{B}T, σT4\sigma T^{4}, gas laws) → convert to kelvin first; a temperature change can stay in °C (2.1)LEARN
Energy to warm, melt or boil something → split the journey at each phase change: Q=mcΔTQ = mc\Delta T for each warming stage, Q=mLQ = mL for each change of phase at constant temperature, then add (2.2)LEARN
Hot and cold bodies mixed in an insulated container → energy lost by the hot body = energy gained by the cold body, with each ΔT\Delta T written as hotter minus colder; solve for the shared final temperature (2.2)LEARN
Steady rate of energy through a wall, window or rod → ΔQΔt=kAΔTΔx\frac{\Delta Q}{\Delta t} = kA\frac{\Delta T}{\Delta x} using the size of ΔT\Delta T and Δx\Delta x in metres (2.3)LEARN
Star's temperature, luminosity, radius or distance → Wien's law gives TT from the peak wavelength, b=L4πd2b = \frac{L}{4\pi d^{2}} links LL and dd, and L=σ(4πR2)T4L = \sigma(4\pi R^{2})T^{4} links LL, RR and TT (2.4)LEARN
Planet's equilibrium temperature → set the absorbed intensity (1−α)S4(1 - \alpha)\frac{S}{4} equal to the emitted eσT4e\sigma T^{4}; with an atmosphere, balance the surface alone: absorbed solar + radiated down by the atmosphere = emitted (2.5)LEARN
Fixed amount of gas moving between two states → P1V1T1=P2V2T2\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}, cancelling what stays constant; moles, molecules or mass in one state → PV=nRT=NkBTPV = nRT = Nk_\text{B}T in Pa, m³ and K (2.7, 2.8)LEARN
Molecular speed from pressure and density → P=13ρv2P = \frac{1}{3}\rho v^{2} gives vrmsv_\text{rms}; internal energy of an ideal monatomic gas → U=32nRT=32PVU = \frac{3}{2}nRT = \frac{3}{2}PV (2.8)LEARN
Resistance of a wire from its size, or after it is stretched or swapped for a thicker one → R=ρLAR = \frac{\rho L}{A} with A=πr2A = \pi r^{2} in m2\text{m}^{2}; change one factor at a time, and the area goes as the diameter squared (2.13)LEARN
Meter reading after a resistor, LDR or thermistor changes → follow the chain one link at a time: total resistance → current → pd across the fixed resistor (IRIR) or the lost volts (IrIr) → reading; use ε=I(R+r)\varepsilon = I(R + r) when the cell has internal resistance (2.14)LEARN

◆Which method when

Gas is heated, cooled, compressed or expands → write QQ (heat in), WW (work by the gas: PΔVP\Delta V, or the area under the P–V line when PP changes) and, for a monatomic ideal gas, ΔU=32nRΔT\Delta U = \frac{3}{2}nR\Delta T, each with its sign, then use Q=ΔU+WQ = \Delta U + W (2.9)LEARN
Heat transferred reversibly at a fixed temperature (melting, boiling, a large reservoir) → ΔS=ΔQT\Delta S = \frac{\Delta Q}{T} with TT in kelvin and ΔQ\Delta Q signed; to test whether a process can happen, add the entropy changes of every body involved and check the total is not negative (2.10)LEARN
Monatomic ideal gas compressed or expanded slowly (reversibly) with no heat flow → adiabatic: P1V153=P2V253P_1V_1^{\frac{5}{3}} = P_2V_2^{\frac{5}{3}} (not for a free expansion into a vacuum, where TT stays the same) for the new PP or VV, then PV=nRTPV = nRT for the temperature, and W=−ΔUW = -\Delta U (2.11)LEARN
Efficiency of an engine running round a gas cycle → η=WQh\eta = \frac{W}{Q_\text{h}}, with WW the area enclosed on the P–V diagram and QhQ_\text{h} the heat taken in on the stages where Q>0Q > 0 only; the most any engine can reach is 1−TcTh1 - \frac{T_\text{c}}{T_\text{h}}, in kelvin (2.11)LEARN

3 Wave behaviour

3.1Simple harmonic motion

Amplitude x0x_0 is the maximum displacement from equilibrium: half the distance between the extremes.LEARN
T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}BOOKLET
a=−ω2xa = -\omega^{2}xBOOKLET
SHM needs an acceleration (and resultant force) proportional to the displacement and opposite to it, towards equilibrium. The minus sign in a=−ω2xa = -\omega^{2}x means aa and xx always have opposite signs.LEARN
T=2πmkT = 2\pi\sqrt{\frac{m}{k}}BOOKLET
T=2πlgT = 2\pi\sqrt{\frac{l}{g}}BOOKLET
Neither period depends on amplitude. Mass–spring: no gg. Pendulum: no mass, small angles only (about 10∘10^{\circ} or less), ll to the centre of the bob.LEARN
Kinetic energy is maximum at equilibrium; potential energy is maximum at the extremes. Without friction the total is constant, and each energy repeats every T2\frac{T}{2}.LEARN

3.2 ◆Phase and the equations of simple harmonic motion

The phase angle ϕ\phi fixes where an oscillator is, and which way it moves, at t=0t = 0. Phase angles are in radians; a full cycle is 2π2\pi.LEARN
x=x0sin⁡(ωt+ϕ)x = x_0\sin(\omega t + \phi)BOOKLET
v=ωx0cos⁡(ωt+ϕ)v = \omega x_0\cos(\omega t + \phi)BOOKLET
v=±ωx02−x2v = \pm\omega\sqrt{x_0^2 - x^2}BOOKLET
vmax=ωx0v_\text{max} = \omega x_0 at equilibrium; maximum acceleration ω2x0\omega^2 x_0 at the extremes. Velocity leads displacement by π2\frac{\pi}{2}; acceleration is in antiphase with it.LEARN
ET=12mω2x02E_\text{T} = \tfrac{1}{2}m\omega^2x_0^2BOOKLET
Ep=12mω2x2E_\text{p} = \tfrac{1}{2}m\omega^2x^2BOOKLET
Ek=ET−EpE_\text{k} = E_\text{T} - E_\text{p}. Without damping ETE_\text{T} is constant, and EkE_\text{k} and EpE_\text{p} each repeat every T2\frac{T}{2}.LEARN

3.3Travelling waves

A travelling wave transfers energy by oscillations, with no net transfer of matter.LEARN
Transverse: oscillations perpendicular to the direction of energy transfer. Longitudinal: oscillations parallel to it, with compressions and rarefactions.LEARN
v=fλ=λTv = f\lambda = \frac{\lambda}{T}BOOKLET
The source sets the frequency. When a wave changes medium, its frequency stays the same; its speed and wavelength change.LEARN
Sound is a longitudinal mechanical wave of pressure changes. It needs a medium, and travels at about 340 m s−1\pu{340 m s-1} in air.LEARN
Electromagnetic waves are transverse oscillations of electric and magnetic fields. All travel at c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1} in a vacuum.LEARN
In order of increasing wavelength: gamma rays, X-rays, ultraviolet, visible (400 to 700 nm), infrared, microwaves, radio waves.LEARN

3.4Reflection, refraction and Snell's law

Wavefronts join points in phase and are one wavelength apart; rays show the direction of travel and are perpendicular to wavefronts.LEARN
Angles at a boundary are measured from the normal. Reflection: angle of incidence = angle of reflection.LEARN
On refraction the frequency stays the same; speed and wavelength change together. Slowing down bends a ray towards the normal.LEARN
n=cvn = \frac{c}{v}LEARN
n1n2=sin⁡θ2sin⁡θ1=v2v1\frac{n_1}{n_2} = \frac{\sin\theta_2}{\sin\theta_1} = \frac{v_2}{v_1}BOOKLET
sin⁡C=n2n1\sin C = \frac{n_2}{n_1}LEARN
Total internal reflection needs light heading into a smaller refractive index at an angle of incidence greater than CC.LEARN
Diffraction is most noticeable when the gap or obstacle is about one wavelength across; it does not change the wavelength.LEARN

3.5Superposition and double-slit interference

Superposition: overlapping waves or pulses add their displacements, with signs, then carry on unchanged.LEARN
Coherent sources have the same frequency and a constant phase difference; a steady interference pattern needs them.LEARN
Δϕ=Δxλ×2π\Delta\phi = \frac{\Delta x}{\lambda} \times 2\piLEARN
For sources in phase: constructive interference when path difference =nλ= n\lambda, destructive when path difference =(n+12)λ= \left(n + \tfrac{1}{2}\right)\lambda.BOOKLET
s=λDds = \frac{\lambda D}{d}BOOKLET
Fringes spread out for larger λ\lambda or DD and smaller dd. White light gives a white central fringe with coloured fringes either side, each with violet nearest the centre and red furthest out.LEARN
Dark fringes do not destroy energy; it moves to the bright fringes.LEARN

3.6 ◆Single-slit diffraction and diffraction gratings

θ=λb\theta = \frac{\lambda}{b}BOOKLET
Single slit: central maximum twice as wide as the others; θ\theta to the first minimum is in radians.LEARN
A narrower slit or a longer wavelength gives a wider pattern; a narrower slit also makes it dimmer.LEARN
Double slit: fringes λd\frac{\lambda}{d} apart sit under a single-slit envelope with its first minimum at λb\frac{\lambda}{b}. A fringe on an envelope minimum is missing.LEARN
nλ=dsin⁡θn\lambda = d\sin\thetaBOOKLET
More slits at the same dd: maxima at the same angles, but sharper and brighter. dd is one over the number of lines per metre.LEARN
White light on a grating: a white central maximum, then spectra with violet inside and red outside. Higher orders are wider and overlap.LEARN
Highest order: the whole number below dλ\frac{d}{\lambda} (an order exactly at dλ\frac{d}{\lambda} is at 90∘90^\circ and never reaches a screen). Total maxima =2nmax+1= 2n_\text{max} + 1.LEARN

3.7Standing waves

A standing wave forms when two waves with the same frequency, wavelength, amplitude and speed travel in opposite directions and superpose. It transfers no net energy.LEARN
Nodes have zero amplitude and antinodes the largest. Neighbouring nodes are λ2\frac{\lambda}{2} apart; a node and the next antinode are λ4\frac{\lambda}{4} apart.LEARN
Points between neighbouring nodes are in phase. Points on opposite sides of a node are in antiphase (π\pi rad).LEARN
Fixed string end or closed pipe end: node. Free string end or open pipe end: antinode.LEARN
Matching ends: λn=2Ln\lambda_n = \frac{2L}{n}, fn=nv2Lf_n = \frac{nv}{2L}, n=1,2,3,…n = 1, 2, 3, \ldotsLEARN
Unlike ends: λn=4Ln\lambda_n = \frac{4L}{n}, fn=nv4Lf_n = \frac{nv}{4L}, n=1,3,5,…n = 1, 3, 5, \ldots (odd harmonics only).LEARN

3.8Resonance and damping

Natural frequency: the frequency of free oscillation. A forced oscillation, once steady, has the driving frequency.LEARN
Resonance: the amplitude of a forced oscillation is largest when the driving frequency equals (or is close to) the natural frequency.LEARN
At resonance the driving force pushes in the direction of motion throughout each cycle, so the energy transfer per cycle is greatest; the amplitude stops growing when energy lost per cycle equals energy supplied per cycle.LEARN
More damping: lower, broader resonance peak at a slightly lower frequency; heavy damping gives no peak.LEARN
Light damping: oscillates with decreasing amplitude. Critical: back to equilibrium in the shortest time without oscillating. Heavy: no oscillation, slow return.LEARN

3.9The Doppler effect

Doppler effect: relative motion along the line joining source and observer changes the observed frequency. Approaching gives a higher frequency, moving apart a lower one.LEARN
Moving source: wavefronts bunch up ahead and spread out behind. Moving observer: same wavelength, met more or less often.LEARN
Sound: it matters which one moves. Light: only the relative velocity matters.LEARN
Δff=Δλλ≈vc(v≪c)\frac{\Delta f}{f} = \frac{\Delta \lambda}{\lambda} \approx \frac{v}{c} \quad (v \ll c)BOOKLET
Redshift (longer wavelength): moving away. Blueshift (shorter wavelength): moving towards. Every line shifts by the same fraction.LEARN
Rotation: one edge redshifted, the other blueshifted; half the difference gives the rotation speed.LEARN
HL: f′=f vv±usf' = f\,\frac{v}{v \pm u_\text{s}} (moving source) and f′=f v±uovf' = f\,\frac{v \pm u_\text{o}}{v} (moving observer). Choose the sign so that approaching raises f′f'.BOOKLET

Which method when

Is this motion simple harmonic? → check that the acceleration (or resultant force) is proportional to the displacement and directed towards equilibrium, a=−ω2xa = -\omega^2 x (3.1)LEARN
Period of a mass on a spring or a pendulum → T=2πmkT = 2\pi\sqrt{\frac{m}{k}} (no gg) or T=2πlgT = 2\pi\sqrt{\frac{l}{g}} (no mass, small angles only); from timings, divide the time for many oscillations by their number (3.1)LEARN
Wave speed from graphs → read λ\lambda off a displacement–position graph and TT off a displacement–time graph, then v=fλ=λTv = f\lambda = \frac{\lambda}{T} (3.3)LEARN
Wave crossing a boundary → ff stays the same; use n1sin⁡θ1=n2sin⁡θ2n_1\sin\theta_1 = n_2\sin\theta_2 with angles from the normal; heading into a smaller nn beyond CC, where sin⁡C=n2n1\sin C = \frac{n_2}{n_1}, gives total internal reflection (3.4)LEARN
Maximum or minimum at a point from two in-phase coherent sources → work out path differenceλ\frac{\text{path difference}}{\lambda}: a whole number is constructive, a whole number plus a half is destructive (3.5)LEARN
Wavelength or fringe spacing from a double slit → s=λDds = \frac{\lambda D}{d} with every length in metres; take ss as the distance across many fringes divided by the number of gaps (3.5)LEARN
Harmonic frequency of a string or pipe → sketch it first: fixed or closed end is a node, free or open end an antinode; matching ends fn=nv2Lf_n = \frac{nv}{2L} for every nn, unlike ends fn=nv4Lf_n = \frac{nv}{4L} for odd nn only (3.7)LEARN
Speed of a star or galaxy from a spectral line → v=c Δλλv = c\,\frac{\Delta\lambda}{\lambda} with Δλ\Delta\lambda = observed minus emitted, valid for v≪cv \ll c; redshift means moving away, blueshift moving towards (3.9)LEARN

◆Which method when

Displacement or velocity at a given time → find ϕ\phi from the starting position and direction, then x=x0sin⁡(ωt+ϕ)x = x_0\sin(\omega t + \phi) and v=ωx0cos⁡(ωt+ϕ)v = \omega x_0\cos(\omega t + \phi) in radian mode; at a given position instead, v=±ωx02−x2v = \pm\omega\sqrt{x_0^2 - x^2} (3.2)LEARN
Energy of an oscillator → ET=12mω2x02E_\text{T} = \frac{1}{2}m\omega^2x_0^2 with x0x_0 in metres, Ep=12mω2x2E_\text{p} = \frac{1}{2}m\omega^2x^2, then Ek=ET−EpE_\text{k} = E_\text{T} - E_\text{p} (3.2)LEARN
Single slit or grating → first single-slit minimum at θ=λb\theta = \frac{\lambda}{b} in radians; grating maxima at nλ=dsin⁡θn\lambda = d\sin\theta with d=1lines per metred = \frac{1}{\text{lines per metre}}; highest order is the whole number below dλ\frac{d}{\lambda} (3.6)LEARN
Sound from a moving source or heard by a moving observer → f′=f vv±usf' = f\,\frac{v}{v \pm u_\text{s}} or f′=f v±uovf' = f\,\frac{v \pm u_\text{o}}{v}, speeds relative to the air; choose the sign so that approaching raises f′f' (3.9)LEARN

4 Fields

4.1Gravitation: Kepler's laws and Newton's law

Kepler: (1) orbits are ellipses with the Sun at one focus; (2) the Sun–planet line sweeps out equal areas in equal times, so a planet is fastest when closest; (3) T2∝r3T^{2} \propto r^{3} for orbits around the same body.LEARN
F=Gm1m2r2F = G\frac{m_1 m_2}{r^{2}}BOOKLET
Circular orbit: gravitational force = centripetal force, so T2=4π2GMr3T^{2} = \frac{4\pi^{2}}{GM}r^{3}. One orbit gives the central mass MM.LEARN
A uniform sphere acts as a point mass at its centre for points on or outside its surface; so does any body far away compared with its size. Measure rr between centres.LEARN
g=Fm=GMr2g = \frac{F}{m} = G\frac{M}{r^{2}}BOOKLET
Field strength is force per unit mass on a small mass, in N kg−1\pu{N kg-1} (= m s−2\pu{m s-2}). Between two bodies, on the line joining them, subtract the fields; the resultant is zero nearer the smaller mass.LEARN
Field lines point towards the mass, never cross, and are closer where the field is stronger: radial around a sphere, parallel and evenly spaced (uniform) near the surface.LEARN

4.2 ◆Gravitational potential and potential energy

Ep=−Gm1m2rE_\text{p} = -G\frac{m_1 m_2}{r}BOOKLET
Vg=−GMrV_\text{g} = -\frac{GM}{r}BOOKLET
Potential energy and potential are zero at infinity and negative everywhere else. rr is measured between centres. Potential is a scalar: add it from each body.LEARN
g=−ΔVgΔrg = -\frac{\Delta V_\text{g}}{\Delta r}BOOKLET
W=mΔVgW = m\Delta V_\text{g}BOOKLET
No work is done moving along an equipotential. Field lines cross equipotentials at right angles and point towards lower potential.LEARN

4.3 ◆Orbits and escape speed

vorbital=GMrv_\text{orbital} = \sqrt{\frac{GM}{r}}BOOKLET
In a circular orbit, gravity provides the centripetal force. Orbital speed is independent of the satellite's mass; around the same body, lower orbits are faster, with shorter periods.LEARN
In a circular orbit, Ek=GMm2rE_\text{k} = \frac{GMm}{2r}, Ep=−GMmrE_\text{p} = -\frac{GMm}{r} and ET=−GMm2rE_\text{T} = -\frac{GMm}{2r}. Energy to change orbit, or to launch from rest on a non-rotating planet, = final total energy minus initial total energy, ignoring air resistance.LEARN
vesc=2GMrv_\text{esc} = \sqrt{\frac{2GM}{r}}BOOKLET
Escape speed: the minimum speed at a point to reach infinity, unpowered and ignoring air resistance. It needs ET≥0E_\text{T} \ge 0, and vesc=2 vorbitalv_\text{esc} = \sqrt{2}\,v_\text{orbital} at the same radius.LEARN
A small atmospheric drag lowers the orbit and increases the speed: drag removes energy, kinetic energy rises by that amount and potential energy falls by twice it.LEARN

4.4Electric charge and Coulomb's law

Like charges repel, unlike charges attract; the two forces are an equal and opposite third law pair. Only repulsion proves a body is charged.LEARN
F=kq1q2r2wherek=14πε0F = k\frac{q_1 q_2}{r^{2}} \quad\text{where}\quad k = \frac{1}{4\pi\varepsilon_0}BOOKLET
Point charges, rr between centres, SI units; sizes of charges in, direction from like or unlike. In a material use its permittivity ε>ε0\varepsilon > \varepsilon_0: F∝1εF \propto \frac{1}{\varepsilon}.LEARN
Total charge of an isolated system is constant. Friction moves electrons; touching conductors share charge (equally if identical); induction separates charge; earthing lets electrons flow to or from the Earth.LEARN
Charge is quantised: q=neq = ne with e=1.60⋅10−19 Ce = \pu{1.60e-19 C}. Millikan balanced charged oil drops, qVd=mgq\frac{V}{d} = mg, and found every charge a whole-number multiple of ee.LEARN

4.5Electric and magnetic field lines

E=FqE = \frac{F}{q}BOOKLET
Electric field strength is the force per unit charge on a small positive test charge. It is a vector, in N C−1\text{N C}^{-1} or V m−1\text{V m}^{-1}.LEARN
E=kQr2E = \frac{kQ}{r^{2}}LEARN
Electric field lines start on ++, end on −- (or run to or from infinity), never cross and meet conductors at right angles. Closer lines mean a stronger field.LEARN
Inside a conductor whose charges are at rest, E=0E = 0. Outside an isolated charged conducting sphere, treat its charge as a point charge at the centre.LEARN
Between like charges there is a neutral point, closer to the smaller charge. Between unlike charges there is none (if their sizes differ, one lies outside them, beyond the smaller charge).LEARN
E=VdE = \frac{V}{d}BOOKLET
Between parallel plates the field is uniform: the same size and direction everywhere, except near the edges.LEARN
Magnetic field lines run from N to S outside a magnet and form closed loops. Right-hand grip rule: thumb along the current, fingers show the field.LEARN

4.6 ◆Electric potential and potential energy

Ep=kq1q2rE_\text{p} = k\frac{q_1 q_2}{r}BOOKLET
Ve=kQrV_\text{e} = \frac{kQ}{r}BOOKLET
EpE_\text{p} and VeV_\text{e} are zero at infinity. VeV_\text{e} has the sign of the charge making it; EpE_\text{p} is positive for like charges, negative for unlike. Potential is a scalar: add it from each charge, signs included. Ep=qVeE_\text{p} = qV_\text{e}.LEARN
E=−ΔVeΔrE = -\frac{\Delta V_\text{e}}{\Delta r}BOOKLET
W=qΔVeW = q\Delta V_\text{e}BOOKLET
1 eV=1.60⋅10−19 J\pu{1 eV} = \pu{1.60e-19 J}. A charge qq acted on only by the electric force gains ΔEk=−qΔVe\Delta E_\text{k} = -q\Delta V_\text{e}; an electron through VV gains eVeV.LEARN
No work is done along an equipotential. Field lines cross equipotentials at right angles, towards lower potential. A conductor whose charges are at rest is one equipotential, with zero field inside.LEARN

4.7Charged particles in electric and magnetic fields

Uniform electric field: a=qEma = \frac{qE}{m}. Along the field, ΔEk=qV\Delta E_\text{k} = qV. Across it, a parabola: constant velocity along the plates, uniform acceleration across.LEARN
F=qvBsin⁡θF = qvB\sin\thetaBOOKLET
Velocity perpendicular to a uniform magnetic field: a circle, r=mvqBr = \frac{mv}{qB}. No work is done, so kinetic energy is constant.LEARN
qm=vBr=2VB2r2\frac{q}{m} = \frac{v}{Br} = \frac{2V}{B^{2}r^{2}}. Use the radius, not the diameter.LEARN
Crossed fields: undeflected when v=EBv = \frac{E}{B}, for any charge or mass.LEARN

4.8Magnetic forces on charges and currents

F=qvBsin⁡θF = qvB\sin\thetaBOOKLET
F=BILsin⁡θF = BIL\sin\thetaBOOKLET
FL=μ0I1I22πr\frac{F}{L} = \mu_0\frac{I_1 I_2}{2\pi r}BOOKLET
Right-hand rule: fingers along BB, thumb along the velocity of a positive charge or the current, force out of the palm. Reverse it for a negative charge.LEARN
The magnetic force on a charge is perpendicular to its velocity, so it does no work. If it is the only force, speed and kinetic energy stay constant.LEARN
B=FILB = \frac{F}{IL} for a wire at right angles to the field; 1 T=1 N A−1 m−11\ \text{T} = 1\ \text{N A}^{-1}\,\text{m}^{-1}.LEARN
Parallel wires: same-direction currents attract, opposite currents repel. The forces on the two wires are always equal and opposite.LEARN

4.9 ◆Magnetic flux, Faraday's law and Lenz's law

Φ=BAcos⁡θ\Phi = BA\cos\thetaBOOKLET
θ\theta is measured from the normal to the area. 1 Wb=1 T m2\pu{1 Wb} = \pu{1 T m2}.LEARN
ε=−NΔΦΔt\varepsilon = -N\frac{\Delta\Phi}{\Delta t}BOOKLET
An emf is induced only when the flux linkage changes (for a moving rod, the flux it sweeps through). A steady flux, however large, induces nothing.LEARN
ε=BvL\varepsilon = BvLBOOKLET
Lenz's law: the induced current opposes the change in flux causing it. This follows from conservation of energy.LEARN

4.10 ◆Generators and alternating emf

A coil turning at constant ω\omega in a uniform field has flux linkage NBAcos⁡(ωt)NBA\cos(\omega t) and a sinusoidal emf.LEARN
ε=NBAωsin⁡(ωt),ε0=NBAω\varepsilon = NBA\omega\sin(\omega t),\quad \varepsilon_0 = NBA\omegaLEARN
The emf is zero when the coil's plane is perpendicular to the field (flux largest), and at its peak when the plane is along the field (flux zero).LEARN
Turn the same coil in the same field kk times as fast: the peak emf is multiplied by kk and the period is divided by kk.LEARN

Which method when

Force between two bodies, or a planet's mass from a moon's orbit → F=Gm1m2r2F = G\frac{m_1m_2}{r^{2}} with rr between centres; for a circular orbit write GMmr2=4π2mrT2\frac{GMm}{r^{2}} = \frac{4\pi^{2}mr}{T^{2}}, with TT in seconds (4.1)LEARN
Comparing the periods or radii of two orbits around the same body → Kepler's third law as a ratio, (T1T2)2=(r1r2)3\left(\frac{T_1}{T_2}\right)^{2} = \left(\frac{r_1}{r_2}\right)^{3}; any units, as long as both orbits use the same ones (4.1)LEARN
Point between two masses, or two like charges, where the field is zero → set the two field sizes equal, GM1x2=GM2(d−x)2\frac{GM_1}{x^{2}} = \frac{GM_2}{(d - x)^{2}} or kQ1x2=kQ2(d−x)2\frac{kQ_1}{x^{2}} = \frac{kQ_2}{(d - x)^{2}}, and take square roots; the point is nearer the smaller one (4.1, 4.5)LEARN
Charged particle fired between parallel plates → E=VdE = \frac{V}{d} and a=qEma = \frac{qE}{m}; treat it like a horizontal projectile: time from the plate length, t=Lvt = \frac{L}{v}, sideways deflection s=12at2s = \frac{1}{2}at^{2} (4.7)LEARN
Charged particle moving at right angles to a uniform magnetic field → magnetic force = centripetal force, so r=mvqBr = \frac{mv}{qB} and the speed stays constant; with crossed electric and magnetic fields, it goes straight through only if v=EBv = \frac{E}{B} (4.7)LEARN
Direction of the magnetic force on a moving charge or a current → right-hand rule: fingers along BB, thumb along a positive charge's velocity or the current, force out of the palm; reverse it for a negative charge (4.8)LEARN

◆Which method when

Energy to move a mass far from a planet → W=mΔVgW = m\Delta V_\text{g}, with Vg=−GMrV_\text{g} = -\frac{GM}{r} at each point and rr from the centre; mgΔhmg\Delta h only when Δh\Delta h is tiny compared with the radius (4.2)LEARN
Field strength from a graph of potential or from equipotentials → minus the potential gradient, g=−ΔVgΔrg = -\frac{\Delta V_\text{g}}{\Delta r} or E=−ΔVeΔrE = -\frac{\Delta V_\text{e}}{\Delta r}; field lines cross equipotentials at right angles, towards lower potential (4.2, 4.6)LEARN
Energy to launch a satellite, raise its orbit or let it escape → use total energy: ET=−GMm2rE_\text{T} = -\frac{GMm}{2r} in a circular orbit, −GMmR-\frac{GMm}{R} at rest on the surface; energy needed = final minus initial, and escape needs ET≥0E_\text{T} \ge 0, so v≥2GMrv \ge \sqrt{\frac{2GM}{r}} (4.3)LEARN
Closest approach of a charged particle fired head-on at a fixed nucleus → its kinetic energy far away all becomes Ep=kq1q2rE_\text{p} = k\frac{q_1q_2}{r}; convert MeV to J first (4.6)LEARN
Changing field, moving magnet or coil entering a field → ε=NΔΦΔt\varepsilon = N\frac{\Delta\Phi}{\Delta t} in size, with Φ=BAcos⁡θ\Phi = BA\cos\theta and θ\theta from the normal; a rod moving across a uniform field: ε=BvL\varepsilon = BvL; direction from Lenz's law (4.9)LEARN
Generator turned faster or slower → peak emf ε0=NBAω\varepsilon_0 = NBA\omega with ω=2πf\omega = 2\pi f: kk times as fast multiplies the peak by kk and divides the period by kk (4.10)LEARN

5 Nuclear and quantum physics

5.1The nuclear atom

Alpha scattering: most pass straight through (the atom is mostly empty space); some are deflected and a very few bounce back (a tiny, dense, positive nucleus).LEARN
Atom about 10−10 m10^{-10}\ \text{m} across; nucleus about 10−1510^{-15} to 10−14 m10^{-14}\ \text{m}. The deflections come from electric repulsion, not from electrons.LEARN
ZAX,N=A−Z{}^{A}_{Z}\text{X}, \qquad N = A - ZLEARN
Neutral atom: ZZ electrons. Ion of charge ±n\pm n: Z∓nZ \mp n electrons. Charge on the nucleus: +Ze+Ze.LEARN

5.2Atomic spectra and energy levels

E=hfE = hfBOOKLET
A transition emits or absorbs one photon whose energy equals the gap between the two levels: ΔE=hf=hcλ\Delta E = hf = \frac{hc}{\lambda}.LEARN
1 eV=1.60⋅10−19 J\pu{1 eV} = \pu{1.60e-19 J}. Convert eV to J before using hh in J s.LEARN
A big energy gap gives a high frequency and a short wavelength; the smallest gap gives the longest wavelength.LEARN
Emission spectrum: bright lines from a hot, low-pressure gas. Absorption spectrum: dark lines in a continuous spectrum after light passes through a cooler gas, at wavelengths that match the same gas's emission lines.LEARN
Line spectra show only certain energy differences, so atoms have discrete energy levels.LEARN
Each element has its own pattern of lines, so line spectra identify the elements in a gas or in a star's outer layers.LEARN

5.3 ◆Nuclear radius and the Bohr model

R=R0A13R = R_0A^{\frac{1}{3}}BOOKLET
Every nucleus has about the same density, 2.3×1017 kg m−32.3 \times 10^{17}\ \text{kg m}^{-3}, because its mass and volume are both proportional to AA.LEARN
d=2kZe2Ekd = \frac{2kZe^{2}}{E_\text{k}}LEARN
Above a certain energy, alpha particles reach the nucleus, the strong nuclear force acts, and scattering deviates from Rutherford's model. That energy gives an estimate of the nuclear radius.LEARN
mvr=nh2πmvr = \frac{nh}{2\pi}BOOKLET
E=−13.6n2 eVE = -\frac{13.6}{n^{2}}\ \text{eV}BOOKLET
A photon's energy is the gap between two levels. The Bohr model works for hydrogen but fails for atoms with more than one electron.LEARN

5.4 ◆The photoelectric effect

Emax=hf−ΦE_\text{max} = hf - \PhiBOOKLET
Work function and threshold: Φ=hf0\Phi = hf_0, and the threshold wavelength is λ0=hcΦ\lambda_0 = \frac{hc}{\Phi}.LEARN
One photon gives all its energy hfhf to one electron. Frequency sets the photon energy; intensity sets the photons per second.LEARN
The wave model cannot explain the threshold frequency, the lack of any delay, or why EmaxE_\text{max} does not depend on intensity.LEARN
Stopping potential: Emax=eVsE_\text{max} = eV_\text{s}. In eV, EmaxE_\text{max} has the same number as VsV_\text{s} in volts.LEARN
Graph of EmaxE_\text{max} against ff: gradient hh, frequency intercept f0f_0, energy intercept −Φ-\Phi.LEARN

5.5 ◆Matter waves and Compton scattering

λ=hp\lambda = \frac{h}{p}BOOKLET
For a particle well below cc: p=mv=2mEkp = mv = \sqrt{2mE_\text{k}}, and an electron accelerated through VV has Ek=eVE_\text{k} = eV.LEARN
Electron diffraction is evidence for the wave nature of matter: it needs a gap or spacing similar to the de Broglie wavelength.LEARN
sin⁡θmin≈λD\sin\theta_\text{min} \approx \frac{\lambda}{D}LEARN
λf−λi=Δλ=hmec(1−cos⁡θ)\lambda_\text{f} - \lambda_\text{i} = \Delta\lambda = \frac{h}{m_\text{e}c}(1 - \cos\theta)BOOKLET
Compton scattering: the photon loses energy to a free electron, so its wavelength increases. θ\theta is the photon's scattering angle.LEARN
Compton scattering shows photons carry momentum as well as energy, so it is stronger evidence for photons than the photoelectric effect.LEARN

5.6Binding energy and mass defect

Isotopes: the same proton number ZZ but a different neutron number NN. Same chemistry, different mass.LEARN
Strong nuclear force: attractive between all nucleons, short range (about 10−15 m10^{-15}\ \text{m}), stronger than the electric repulsion inside a nucleus.LEARN
E=mc2,1 u=931.5 MeV c−2E = mc^{2}, \qquad \pu{1 u} = 931.5\ \text{MeV}\,c^{-2}BOOKLET
Δm=Zmp+(A−Z)mn−Mnucleus,EB=Δm c2\Delta m = Zm_\text{p} + (A - Z)m_\text{n} - M_\text{nucleus}, \qquad E_\text{B} = \Delta m\, c^{2}LEARN
Binding energy is the energy needed to separate a nucleus into its nucleons, not energy stored in it. Products of an energy-releasing reaction have less mass.LEARN
Binding energy per nucleon peaks at about 8.8 MeV near iron-56. Fusion of light nuclei and fission of heavy nuclei both move towards the peak and release energy.LEARN

5.7Radioactive decay

Random: you cannot predict which nucleus will decay, or when. Spontaneous: the rate is not affected by temperature, pressure or chemical state.LEARN
Alpha: Z−2Z - 2, A−4A - 4. Beta-minus: neutron to proton, Z+1Z + 1. Beta-plus: proton to neutron, Z−1Z - 1. Gamma: ZZ and AA unchanged, the nucleus loses energy.LEARN
ZAX→Z−2A−4Y+24αZAX→Z+1AY+−10e+00ν‾ZAX→Z−1AY++10e+00ν\begin{aligned} &{}^{A}_{Z}\text{X} \rightarrow {}^{A-4}_{Z-2}\text{Y} + {}^{4}_{2}\alpha \\ &{}^{A}_{Z}\text{X} \rightarrow {}^{A}_{Z+1}\text{Y} + {}^{0}_{-1}\text{e} + {}^{0}_{0}\overline{\nu} \\ &{}^{A}_{Z}\text{X} \rightarrow {}^{A}_{Z-1}\text{Y} + {}^{0}_{+1}\text{e} + {}^{0}_{0}\nu \end{aligned}LEARN
In a decay equation the top numbers and the bottom numbers each balance.LEARN
Antineutrino with beta-minus, neutrino with beta-plus: no charge, very small mass, hardly interact. They carry part of the energy and momentum.LEARN
Ionising: alpha > beta > gamma. Penetrating: gamma > beta > alpha. Alpha stopped by paper, beta by a few mm of aluminium; lead reduces gamma but never to zero.LEARN

5.8Activity and half-life

Activity is the number of decays per second, in becquerels (1 Bq\pu{1 Bq} = one decay per second). The count rate is the number detected per unit time; background aside, it is less than the activity.LEARN
Half-life is the time for the number of undecayed nuclei, or the activity, to halve. It is the same for any starting amount.LEARN
N=N0(12)n,n=tT12N = N_0\left(\tfrac{1}{2}\right)^{n}, \quad n = \frac{t}{T_{\frac{1}{2}}}LEARN
Subtract the background from every count rate before halving. Add it back to predict what the counter will read.LEARN

5.9 ◆Nuclear stability and the neutrino

Strong force evidence: nuclei hold together against proton repulsion, neutrons are bound, and fast alpha particles depart from the electric-force model within about 10−15 m10^{-15}\ \text{m}.LEARN
Stable nuclei: NZ≈1\frac{N}{Z} \approx 1 when light, up to about 1.5 when heavy. Too many neutrons: beta-minus. Too few: beta-plus. Z>82Z > 82: none stable.LEARN
Above A≈60A \approx 60 the binding energy per nucleon is approximately constant, because each nucleon is bound only to its nearest neighbours.LEARN
Alpha and gamma line spectra show discrete nuclear energy levels; a gamma photon carries the gap between two levels.LEARN
The beta spectrum is continuous up to EmaxE_\text{max}, so the (anti)neutrino shares the energy released.LEARN
Emax≈Δm c2,Δm=Mparent−Mdaughter−me (nuclear masses)E_\text{max} \approx \Delta m\,c^{2}, \qquad \Delta m = M_\text{parent} - M_\text{daughter} - m_\text{e}\ \text{(nuclear masses)}LEARN

5.10 ◆The radioactive decay law

N=N0e−λtN = N_0\mathrm{e}^{-\lambda t}BOOKLET
A=λN=λN0e−λtA = \lambda N = \lambda N_0\mathrm{e}^{-\lambda t}BOOKLET
T12=ln⁡2λT_{\frac{1}{2}} = \frac{\ln 2}{\lambda}BOOKLET
The probability of decay within time tt is 1−e−λt1 - \mathrm{e}^{-\lambda t}. It is close to λt\lambda t only when λt\lambda t is small.LEARN
λ\lambda and tt must use the same time unit. For AA in Bq from A=λNA = \lambda N, use λ\lambda in s−1\text{s}^{-1}.LEARN
A graph of ln⁡C\ln C (corrected count rate) against tt is a straight line with gradient −λ-\lambda.LEARN

5.11Fission and nuclear power

Fission: a heavy nucleus splits into two medium-mass nuclei and usually 2 or 3 neutrons, spontaneously or after absorbing a neutron.LEARN
Ereleased=Δm c2=EB, products−EB, reactants,1 u→931.5 MeVE_\text{released} = \Delta m\, c^{2} = E_\text{B, products} - E_\text{B, reactants}, \qquad \pu{1 u} \to 931.5\ \text{MeV}LEARN
Most of the energy released first appears as kinetic energy of the fission fragments.LEARN
Chain reaction: steady when, on average, exactly one neutron per fission causes another fission; it grows above one and dies out below one.LEARN
Moderator slows neutrons; control rods absorb neutrons; heat exchanger passes energy to the steam circuit; shielding absorbs radiation.LEARN
Fission products are neutron-rich: radioactive (beta-minus, gamma), hot, some long-lived. Waste is cooled in water, sealed and stored deep underground.LEARN

5.12Fusion and the life of stars

A star is stable when the outward force from radiation and gas pressure balances the inward gravitational force.LEARN
4 11H→24He+2 e++2 νe4\,{}^{1}_{1}\text{H} \rightarrow {}^{4}_{2}\text{He} + 2\,\mathrm{e}^{+} + 2\,\nu_\text{e}LEARN
Energy released == mass defect in u × 931.5\times\ 931.5 MeV, positrons included. Luminosity ÷\div energy per reaction == reactions per second.LEARN
Fusion needs a high temperature (to overcome electrostatic repulsion) and a high density (for frequent collisions).LEARN
More massive main-sequence stars are more luminous and leave the main sequence sooner.LEARN
Up to about 8 solar masses: red giant, planetary nebula, white dwarf. Above: red supergiant, supernova, neutron star or black hole.LEARN

5.13The HR diagram, parallax and stellar radii

HR diagram: luminosity up, temperature decreasing to the right. Main sequence diagonal; red giants above right; supergiants across the top; white dwarfs bottom left; instability strip nearly vertical.LEARN
Lines of constant radius (L∝T4L \propto T^{4}) slope down to the right; radius increases towards the top right.LEARN
Spectrum: the peak wavelength gives the surface temperature (Wien's law); the dark absorption lines give the composition.LEARN
d (parsec)=1p (arc-second)d\,(\text{parsec}) = \frac{1}{p\,(\text{arc-second})}BOOKLET
pp is half the shift seen six months apart. 1 pc=3.26 ly1\ \text{pc} = 3.26\ \text{ly}, 1 ly=9.46⋅1015 m1\ \text{ly} = \pu{9.46e15 m}, 1 AU=1.50⋅1011 m1\ \text{AU} = \pu{1.50e11 m}.LEARN
R=L4πσT4R = \sqrt{\frac{L}{4\pi\sigma T^{4}}}LEARN
RR⊙=LL⊙(T⊙T)2\frac{R}{R_\odot} = \sqrt{\frac{L}{L_\odot}}\left(\frac{T_\odot}{T}\right)^{2}LEARN

Which method when

Wavelength or frequency of light from a transition on an energy-level diagram → photon energy = the gap between the two levels, converted to J, then λ=hcΔE\lambda = \frac{hc}{\Delta E}; the smallest gap gives the longest wavelength (5.2)LEARN
Energy released by a fission, fusion or decay, given masses → mass before − mass after, counting every neutron, electron and positron; masses in u × 931.5 give MeV, masses in kg use ΔE=Δm c2\Delta E = \Delta m\, c^{2} for J (5.6)LEARN
Energy released, given binding energies per nucleon → total binding energy =A×EBA= A \times \frac{E_\text{B}}{A} for each nucleus; energy released = total after − total before, with free neutrons and protons counting zero (5.6)LEARN
Count rate after a whole number of half-lives, with a background reading → subtract the background, multiply by (12)n\left(\tfrac{1}{2}\right)^{n} with n=tT12n = \frac{t}{T_{\frac{1}{2}}}, then add the background back if asked what the counter reads (5.8)LEARN
Fuel used each second by a star or a power station → reactions per second = power from the reactions ÷ energy per reaction in J (the star's luminosity, or the plant's electrical output ÷ efficiency), then × mass used per reaction (5.12)LEARN
Radius of a star from parallax, apparent brightness and peak wavelength → d=1pd = \frac{1}{p} in pc, converted to m; L=4πd2bL = 4\pi d^{2}b; TT from Wien's law; then R=L4πσT4R = \sqrt{\frac{L}{4\pi\sigma T^{4}}}, or RR⊙=LL⊙(T⊙T)2\frac{R}{R_\odot} = \sqrt{\frac{L}{L_\odot}}\left(\frac{T_\odot}{T}\right)^{2} for ratios (5.13)LEARN

◆Which method when

Alpha particle fired head-on at a nucleus, how close it gets → energy conservation with the nucleus fixed: initial EkE_\text{k} = electric EpE_\text{p} at rest, so d=2kZe2Ekd = \frac{2kZe^{2}}{E_\text{k}} with EkE_\text{k} in J (5.3)LEARN
Light on a metal, a stopping potential or a graph of EmaxE_\text{max} against ff → Emax=hf−Φ=eVsE_\text{max} = hf - \Phi = eV_\text{s}, with every energy in the same unit; on the graph, gradient hh and frequency intercept f0f_0 (5.4)LEARN
Wavelength of a moving electron or other particle, or electron diffraction rings → λ=hp\lambda = \frac{h}{p}; well below cc, p=mv=2mEkp = mv = \sqrt{2mE_\text{k}}, with Ek=eVE_\text{k} = eV in J for an accelerated electron (5.5)LEARN
X-ray or gamma photon scattered by an electron through an angle → Δλ=hmec(1−cos⁡θ)\Delta\lambda = \frac{h}{m_\text{e}c}(1 - \cos\theta) with θ\theta the photon's angle; the electron's kinetic energy is the energy the photon lost (5.5)LEARN
Nuclei or activity left after any time, or a half-life from a decay constant → N=N0e−λtN = N_0\mathrm{e}^{-\lambda t} with λ\lambda and tt in the same unit, A=λNA = \lambda N with λ\lambda in s−1\text{s}^{-1} for Bq, and T12=ln⁡2λT_{\frac{1}{2}} = \frac{\ln 2}{\lambda} (5.10)LEARN
Maximum kinetic energy of beta particles from masses → Emax≈Δm c2E_\text{max} \approx \Delta m\, c^{2} with Δm=Mparent−Mdaughter−me\Delta m = M_\text{parent} - M_\text{daughter} - m_\text{e} for nuclear masses; at EmaxE_\text{max} the (anti)neutrino gets almost nothing (5.9)LEARN

6 Practical skills

6.1Units, measurement and estimation

Fundamental SI units: kg, m, s, A, K, mol (and cd). Derived units come from defining equations.LEARN
N=kg m s−2\text{N} = \text{kg m s}^{-2}, J=kg m2 s−2\text{J} = \text{kg m}^{2}\,\text{s}^{-2}, C=A s\text{C} = \text{A s}.LEARN
Scientific notation: a×10na \times 10^{n} with 1≤a<101 \le a < 10. A prefix is a power of ten; square or cube it with the unit (1 cm2=10−4 m2\pu{1 cm2} = 10^{-4}\ \text{m}^{2}).LEARN
1 eV=1.60×10−19 J\pu{1 eV} = 1.60 \times 10^{-19}\ \text{J}; 1 ly=9.46×1015 m\pu{1 ly} = 9.46 \times 10^{15}\ \text{m}; 1 pc=3.26 ly\pu{1 pc} = 3.26\ \text{ly}; 1 h=3600 s\pu{1 h} = \pu{3600 s}.LEARN
Every term of a correct equation has the same units. Matching units do not prove an equation right.LEARN
Order of magnitude: the nearest power of ten, with the halfway point at about 3.16×10n3.16 \times 10^{n}.LEARN
Read to the resolution, check zero errors, read at eye level, and time many cycles.LEARN

6.2Scalars and vectors

Scalar: magnitude only (mass, distance, speed, time, energy, power, temperature, charge, current). Vector: magnitude and direction (displacement, velocity, acceleration, force, momentum, field strength).LEARN
Draw a vector as an arrow: length to a stated scale, direction from a reference line, starting at the point of application. kak\boldsymbol{a} has magnitude ∣k∣a|k|a; a negative kk reverses the direction.LEARN
Add vectors head to tail; the resultant runs from the first tail to the last head. Subtract by adding the negative: Δv=vf−vi\Delta\boldsymbol{v} = \boldsymbol{v}_\text{f} - \boldsymbol{v}_\text{i}.LEARN
R=A2+B2tan⁡θ=BA(A⊥B)R = \sqrt{A^{2} + B^{2}} \qquad \tan\theta = \frac{B}{A} \quad (\boldsymbol{A} \perp \boldsymbol{B})LEARN
Fx=Fcos⁡θFy=Fsin⁡θF_x = F\cos\theta \qquad F_y = F\sin\thetaLEARN
θ=sr2π rad=360∘\theta = \frac{s}{r} \qquad 2\pi\ \text{rad} = 360^{\circ}LEARN

6.3Uncertainties and errors

Random error: scatter, lowers precision, reduced by averaging repeats. Systematic error: same shift each time, lowers accuracy, not reduced by repeats.LEARN
×\times and ÷\div: fewest significant figures. ++ and −-: fewest decimal places.LEARN
Analogue: half the smallest division. Digital: one unit in the last digit. Repeats: half the range. Uncertainty to 1 s.f., value to the same decimal place.LEARN
percentage uncertainty=Δxx×100%\text{percentage uncertainty} = \frac{\Delta x}{x} \times 100\%LEARN
percentage error=∣experimental value−accepted value∣∣accepted value∣×100%\text{percentage error} = \frac{\lvert \text{experimental value} - \text{accepted value} \rvert}{\lvert \text{accepted value} \rvert} \times 100\%LEARN
Percentage change =new−originaloriginal×100%= \frac{\text{new} - \text{original}}{\text{original}} \times 100\%. Percentage difference =∣a−b∣mean×100%= \frac{\lvert a - b \rvert}{\text{mean}} \times 100\%.LEARN
Sums and differences: add absolute uncertainties. Products and quotients: add fractional ones. Power nn: multiply the fractional uncertainty by ∣n∣\lvert n \rvert.LEARN
Accepted value outside the range (value ± absolute uncertainty): a systematic error is likely. Comparing percentage error with percentage uncertainty only agrees with this when the gap is clear.LEARN

6.4Graphs and data analysis

Direct proportionality: y=kxy = kx, straight through the origin. Inverse: y=kxy = \frac{k}{x}, so xyxy is constant. Correlation is any trend, not proof of cause.LEARN
Independent variable on xx; axes labelled quantity / unit; scales of 1, 2 or 5 filling over half the grid. Sketches: labelled axes, no scales.LEARN
Best fit: one ruled line or smooth curve, points evenly either side; never join dots or force it through the origin.LEARN
Gradient =ΔyΔx= \frac{\Delta y}{\Delta x} from a large triangle, in yy unit per xx unit; on a curve, use the tangent.LEARN
Gradient uncertainty =max gradient−min gradient2= \frac{\text{max gradient} - \text{min gradient}}{2}, using lines through every bar.LEARN
Data fit y∝xy \propto x only if a line through the origin passes through every bar.LEARN
Log scale: equal steps are factors of 10; a fraction ff past 10n10^{n} is 10n+f10^{n+f}. Straight log–log means y=kxny = kx^{n}, gradient nn.LEARN
Linearise into y=mx+cy = mx + c only when theory gives the equation.LEARN

Which method when

Unit of a derived quantity, or is this equation possible? → build fundamental units from defining equations (F=maF = ma, W=FsW = Fs, Q=ItQ = It); every term must match, but a match can't show a missing 12\frac{1}{2} or 2π2\pi (6.1)LEARN
Estimate or order of magnitude → round to the nearest power of ten on a log scale: a×10na \times 10^{n} becomes 10n+110^{n+1} when aa is above about 3.163.16 (6.1)LEARN
Forces or velocities at an angle → resolve each into perpendicular components (cos⁡\cos for the side next to the angle, sin⁡\sin for the side opposite), add each direction with signs, then combine with Pythagoras (6.2)LEARN
Change in velocity when the direction changes → Δv=vf+(−vi)\Delta\boldsymbol{v} = \boldsymbol{v}_\text{f} + (-\boldsymbol{v}_\text{i}): reverse the initial velocity and add head to tail; along a line, give each velocity its sign first (6.2)LEARN
Uncertainty in a calculated result → sums and differences: add absolute uncertainties; products and quotients: add fractional ones; a power nn: multiply the fractional uncertainty by ∣n∣\lvert n \rvert (6.3)LEARN
Does a result agree with the accepted value? → see whether the accepted value lies inside value ±\pm absolute uncertainty; if not, name a likely systematic error (6.3)LEARN
Comparing two values → percentage error against an accepted value, percentage change from an original value, percentage difference (over the mean) when neither is the reference (6.3)LEARN
Uncertainty in a gradient or intercept → draw the steepest and shallowest straight lines through every uncertainty bar; Δ(gradient)=max−min2\Delta(\text{gradient}) = \frac{\text{max} - \text{min}}{2} (6.4)LEARN
Do the data support y∝xy \propto x? → draw the best line without forcing it through the origin, then check whether some straight line through the origin passes through every uncertainty bar (6.4)LEARN
Testing a predicted relationship → rearrange it into y=mx+cy = mx + c and plot those quantities (T2T^{2} against mm, II against 1d2\frac{1}{d^{2}}); for y=kxny = kx^{n} with nn unknown, plot log⁡10y\log_{10} y against log⁡10x\log_{10} x and the gradient is nn (6.4)LEARN
Follows the IB Physics guide (first assessment 2025). Not affiliated with the IB.