IB Chemistry notes › Glossary

Glossary

Key terms in plain words, with the lesson that teaches each one.

A

absolute uncertainty
The range either side of a value within which the true value is expected to lie, written with ±\pm and the same unit as the value, as in 12.35±0.05 cm312.35 \pm \pu{0.05 cm3}.Taught in 7.2 Uncertainties, errors and significant figures
accuracy
How close a measurement, or the mean of several, is to the true or accepted value.Taught in 7.2 Uncertainties, errors and significant figures
acid dissociation constant
The equilibrium constant KaK_\mathrm{a} for a weak acid ionizing in water, Ka=[HX+][AX−][HA]K_\mathrm{a} = \frac{[\ce{H^+}][\ce{A^-}]}{[\ce{HA}]} (water left out); the larger it is, the stronger the acid, and it changes only with temperature.Taught in 6.4 pOH, Ka and Kb
acid rain
Rain with a pH below about 5.6, made acidic by oxides of sulfur and nitrogen, mainly from burning fuels. Carbon dioxide alone only takes rain to about pH 5.6.Taught in 3.2 Group trends and the oxides of elements
acid-base indicator
A weak acid, written HInd, whose undissociated form and conjugate base IndX−\ce{Ind^-} have different colours, so its colour shows whether a solution's pH is below or above a value close to its pKa.Taught in 6.6 Acid–base indicators
acidic oxide
An oxide, usually of a non-metal, that reacts with bases to form a salt and water. If it dissolves, it gives an acidic solution, as sulfur dioxide does.Taught in 3.2 Group trends and the oxides of elements
activation energy
The minimum energy that colliding particles need for a successful collision that leads to a reaction; on an energy profile it is the rise from the reactants to the top of the hump.Taught in 5.4 Activation energy and catalysts
addition polymer
A polymer formed when monomers with a C=C\ce{C=C} double bond join, each double bond becoming a single bond; it is the only product, so the atom economy is 100%.Taught in 2.12 Polymers
addition reaction
A reaction in which two reactant molecules combine to form a single product; in an alkene, the C=C\ce{C=C} double bond becomes a single bond.Taught in 2.12 Polymers
alcohol
A compound with a hydroxyl group, −OH\ce{-OH}, bonded to a saturated carbon atom, such as ethanol, CHX3CHX2OH\ce{CH3CH2OH}.Taught in 3.6 Organic formulas, functional groups and homologous series
aldehyde
A compound with a carbonyl group at the end of a carbon chain, written −CHO\ce{-CHO}, such as ethanal, CHX3CHO\ce{CH3CHO}.Taught in 3.6 Organic formulas, functional groups and homologous series
alkali
A base that dissolves in water to give hydroxide ions, OHX−(aq)\ce{OH^-(aq)}, such as sodium hydroxide.Taught in 6.1 Brønsted–Lowry acids and bases
alkali metal
An element of group 1 other than hydrogen, such as sodium or potassium: a reactive metal with one valence electron that forms 1+ ions.Taught in 3.1 The periodic table and periodicity
alkane
A saturated hydrocarbon, containing only carbon and hydrogen and only single bonds, with the general formula CXnHX2n+2\ce{C_{n}H_{2n+2}} for open chains.Taught in 3.6 Organic formulas, functional groups and homologous series
alkene
A hydrocarbon containing one carbon–carbon double bond, with the general formula CXnHX2n\ce{C_{n}H_{2n}} for open chains.Taught in 3.6 Organic formulas, functional groups and homologous series
alkyne
A hydrocarbon containing one carbon–carbon triple bond, with the general formula CXnHX2n−2\ce{C_{n}H_{2n-2}} for open chains.Taught in 3.6 Organic formulas, functional groups and homologous series
allotrope
One of two or more structural forms of the same element in the same physical state, such as diamond and graphite, or OX2\ce{O2} and OX3\ce{O3}.Taught in 2.5 Covalent network structures
alloy
A mixture of a metal with one or more other metals or non-metals, held together by metallic bonding; it has no fixed composition, so it is not a compound, and it is usually harder and stronger than the pure metal.Taught in 2.11 The bonding triangle and alloys
amine
A compound derived from ammonia by replacing one or more of its hydrogen atoms with alkyl groups, such as methanamine, CHX3NHX2\ce{CH3NH2}; amines are weak bases.Taught in 3.6 Organic formulas, functional groups and homologous series
amphiprotic species
A species that can act as either a proton donor or a proton acceptor, such as HX2O\ce{H2O} or HCOX3X−\ce{HCO3^-}.Taught in 6.1 Brønsted–Lowry acids and bases
amphoteric oxide
An oxide that reacts with both acids and bases to form salts. Aluminium oxide, AlX2OX3\ce{Al2O3}, is the period 3 example.Taught in 3.2 Group trends and the oxides of elements
anion
A negatively charged ion, formed when an atom, usually of a non-metal, gains one or more electrons, such as ClX−\ce{Cl^-} or OX2−\ce{O^2-}.Taught in 2.1 The ionic model
anode
The electrode where oxidation takes place. It is negative in a voltaic cell and positive in an electrolytic cell.Taught in 6.10 Primary and secondary cells
aromatic compound
A compound containing a benzene ring, or a similar flat ring with a delocalized system of electrons, such as methylbenzene or phenol.Taught in 2.8 Resonance, expanded octets and formal charge
Arrhenius equation
The equation k=Ae−Ea/RTk = A\mathrm{e}^{-E_\text{a}/RT}, which shows how the rate constant depends on temperature; measuring kk at several temperatures gives the activation energy.Taught in 5.7 The Arrhenius equation
Arrhenius factor
The constant AA in the Arrhenius equation: it accounts for how often reactant particles collide with an orientation that can lead to reaction, and it has the same units as kk.Taught in 5.7 The Arrhenius equation
atom economy
The molar mass of the desired product as a percentage of the total molar mass of all reactants in the balanced equation; it measures how much of the reactants avoids becoming waste, not how well the reaction worked.Taught in 5.2 Limiting reactants, yield and atom economy
atomic number
The number of protons in the nucleus of an atom, symbol ZZ; it decides which element the atom belongs to.Taught in 1.2 The nuclear atom and isotopes
atomic orbital
A region around the nucleus where an electron is most likely to be found; each orbital holds at most two electrons, with opposite spins.Taught in 1.4 Sublevels, orbitals and electron configurations
atomic radius
Half the distance between the nuclei of two bonded atoms of the same element; it generally decreases across a period and increases down a group.Taught in 3.1 The periodic table and periodicity
Aufbau principle
The rule that electrons occupy the lowest-energy orbitals available first, so the order up to Z=36Z = 36 is 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p.Taught in 1.4 Sublevels, orbitals and electron configurations
Avogadro constant
The number of particles in one mole, NA=6.02⋅1023 mol−1N_\text{A} = \pu{6.02e23 mol-1} in the data booklet. Its unit, mol⁻¹, means "per mole".Taught in 1.6 The mole and molar mass
Avogadro's law
The rule that gases at the same temperature and pressure have the same number of molecules in equal volumes, so at fixed temperature and pressure the volume of a gas is proportional to its amount in moles.Taught in 1.8 Concentration and Avogadro's law

B

base dissociation constant
The equilibrium constant KbK_\mathrm{b} for a weak base taking a proton from water, Kb=[BHX+][OHX−][B]K_\mathrm{b} = \frac{[\ce{BH^+}][\ce{OH^-}]}{[\ce{B}]} (water left out); the larger it is, the stronger the base.Taught in 6.4 pOH, Ka and Kb
basic oxide
An oxide, usually of a metal, that reacts with acids to form a salt and water. If it dissolves, it gives an alkaline solution, as sodium oxide does.Taught in 3.2 Group trends and the oxides of elements
biofuel
A fuel made from recently living material, whose carbon was fixed from the air by photosynthesis; it is renewable, but not carbon neutral once farming, processing and transport are counted.Taught in 4.5 Energy from fuels
bond enthalpy
The energy needed to break one mole of a particular covalent bond in gaseous molecules, giving gaseous atoms or groups of atoms; data booklet values are averages over many compounds.Taught in 4.2 Bond enthalpies and Hess's law
bond length
The distance between the nuclei of two atoms joined by a covalent bond; between the same two elements, a triple bond is shorter than a double bond, which is shorter than a single bond.Taught in 2.2 Covalent bonds and Lewis formulas
bond polarity
Uneven sharing of the electron pair in a covalent bond, caused by a difference in electronegativity between the two bonded atoms.Taught in 2.4 Bond and molecular polarity
bonding triangle
A triangular diagram with ionic, covalent and metallic bonding at its corners, on which a substance is placed using the average electronegativity and the electronegativity difference of its elements, so its position shows how much each type of bonding contributes.Taught in 2.11 The bonding triangle and alloys
Born-Haber cycle
An enthalpy cycle, based on Hess's law, showing that forming an ionic compound from its elements has the same enthalpy change as atomizing the elements, ionizing the atoms and forming the lattice from the gaseous ions; it is used to find a lattice enthalpy or any other missing step.Taught in 4.4 Born–Haber cycles
Brønsted-Lowry acid
A species that donates a proton (HX+\ce{H^+}) to another species.Taught in 6.1 Brønsted–Lowry acids and bases
Brønsted-Lowry base
A species that accepts a proton (HX+\ce{H^+}) from another species, using a lone pair to bond to it.Taught in 6.1 Brønsted–Lowry acids and bases
buffer region
The flatter part of a pH curve where a weak acid and its conjugate base (or a weak base and its conjugate acid) are both present, so the pH changes slowly; at its middle, the half-equivalence point, pH=pKa\mathrm{pH} = \mathrm{p}K_\mathrm{a} (or pOH=pKb\mathrm{pOH} = \mathrm{p}K_\mathrm{b}).Taught in 6.5 Salt solutions and pH curves
buffer solution
A solution whose pH changes very little when a small amount of acid or alkali is added, because it contains a weak acid and its conjugate base (or a weak base and its conjugate acid) in large amounts.Taught in 6.7 Buffer solutions

C

calorimetry
Measuring the heat released or absorbed by a reaction from the temperature change of a known mass of water or solution; heat exchange with the surroundings usually makes the measured value smaller in size than the true value.Taught in 4.1 Measuring enthalpy changes
carbocation
An ion with a positive charge on a carbon atom that has only three bonds and six outer electrons, such as (CHX3)X3CX+\ce{(CH3)3C^+}.Taught in 6.18 Nucleophilic substitution mechanisms
carbonyl group
A carbon atom double-bonded to an oxygen atom, C=O\ce{C=O}; as −CHO\ce{-CHO} at the end of a chain it makes an aldehyde, and inside a chain, with a carbon on each side, a ketone.Taught in 3.6 Organic formulas, functional groups and homologous series
carboxyl group
The −COOH\ce{-COOH} group, a carbon with both a C=O\ce{C=O} and an O−H\ce{O-H}, found in carboxylic acids.Taught in 3.6 Organic formulas, functional groups and homologous series
carboxylic acid
A compound containing the carboxyl group, −COOH\ce{-COOH}, such as ethanoic acid; carboxylic acids are weak acids.Taught in 3.6 Organic formulas, functional groups and homologous series
catalyst
A substance that increases the rate of a reaction by providing an alternative pathway with a lower activation energy and is not used up; it changes neither ΔH\Delta H nor the position of equilibrium.Taught in 5.4 Activation energy and catalysts
cathode
The electrode where reduction takes place. It is positive in a voltaic cell and negative in an electrolytic cell.Taught in 6.10 Primary and secondary cells
cation
A positively charged ion, formed when an atom, usually of a metal, loses one or more electrons, such as NaX+\ce{Na^+} or FeX3+\ce{Fe^3+}.Taught in 2.1 The ionic model
chain reaction
A radical reaction in which each propagation step uses up one radical and makes another, so the cycle repeats between initiation and termination.Taught in 6.15 Radicals
chemical environment
The surroundings of a hydrogen atom in a molecule; hydrogens with identical surroundings are equivalent and give one NMR signal between them.Taught in 3.10 Proton NMR and combined structural analysis
chemical shift
The position of an NMR signal, δ\delta, in parts per million (ppm) measured from the tetramethylsilane (TMS) signal at δ=0\delta = 0; it shows what kind of group a hydrogen is near.Taught in 3.10 Proton NMR and combined structural analysis
chiral carbon
A carbon atom with four different atoms or groups attached; a molecule with one such carbon cannot be superimposed on its mirror image.Taught in 3.8 Stereoisomers
chromatography
A way of separating a mixture. Each component is carried along by a moving phase and held back by a fixed phase, through intermolecular forces, so components that are held back less travel further.Taught in 2.7 Chromatography
cis-trans isomerism
Stereoisomerism caused by restricted rotation about a C=C bond or within a ring, when each of the two carbons involved carries two different groups: the cis isomer has the matching groups on the same side, the trans isomer on opposite sides.Taught in 3.8 Stereoisomers
coefficient of determination
R2R^2, a value from 0 to 1 showing how well a trend line or curve fits the data; the closer it is to 1, the closer the points lie to the line.Taught in 7.3 Graphs and data processing
collision theory
The model that particles react only when they collide, and only if the collision has at least the activation energy and the proper orientation.Taught in 5.3 Rates of reaction and collision theory
colorimetry
A technique that measures how much light of a chosen colour a coloured solution absorbs (its absorbance), and uses a calibration curve made from standard solutions to find the solution's concentration.Taught in 7.1 Experimental techniques and safety
combustion
An exothermic reaction of a substance with oxygen, forming oxides; complete combustion of a fuel made of carbon and hydrogen (and oxygen) gives carbon dioxide and water.Taught in 4.5 Energy from fuels
complementary colour
The colour opposite another on the colour wheel; a substance that absorbs one colour of light is seen as its complementary colour.Taught in 3.5 Coloured transition element complexes
complex ion
A central metal ion bonded to a number of ligands by coordination bonds, written in square brackets with its overall charge, such as [Ni(HX2O)X6]X2+\ce{[Ni(H2O)6]^2+}.Taught in 3.4 Ionization energy trends and transition elements
compound
A substance of two or more elements held together by chemical bonds in a fixed ratio, with properties different from those elements.Taught in 1.1 The particulate nature of matter
condensation polymer
A polymer, such as a polyester or polyamide, formed from monomers with two functional groups each, with a small molecule such as water released at every link.Taught in 2.12 Polymers
condensation reaction
A reaction in which two molecules join together and a small molecule, such as water, is released.Taught in 2.12 Polymers
conjugate acid-base pair
Two species whose formulas differ by exactly one proton, such as NHX4X+\ce{NH4^+} and NHX3\ce{NH3}; the one with the extra proton is the acid.Taught in 6.1 Brønsted–Lowry acids and bases
convergence
The way the lines in an emission spectrum get closer and closer together towards higher frequency (shorter wavelength), until they merge at a limit.Taught in 1.3 Emission spectra and energy levels
coordination bond
A covalent bond in which one atom supplies both electrons of the shared pair, as when the lone pair on nitrogen in ammonia bonds to HX+\ce{H^+}; also called a dative or coordinate bond.Taught in 2.2 Covalent bonds and Lewis formulas
coordination number
The number of coordination bonds that ligands form to the central metal ion in a complex, for example 6 in [Fe(HX2O)X6]X2+\ce{[Fe(H2O)6]^2+}.Taught in 3.5 Coloured transition element complexes
covalent bond
A bond in which two atoms share a pair of electrons; both positive nuclei attract the shared pair, and that electrostatic attraction holds the atoms together.Taught in 2.2 Covalent bonds and Lewis formulas
covalent network structure
A solid in which atoms are joined by covalent bonds in a continuous network through the whole structure, with no separate molecules, so melting it means breaking strong covalent bonds.Taught in 2.5 Covalent network structures
curly arrow
A curved arrow with a full head that shows an electron pair moving, from a lone pair or bond to the atom or bond where the pair ends up.Taught in 6.16 Nucleophiles and electrophiles

D

d orbital splitting
In a complex ion, the ligands raise the energy of some d orbitals of the central ion more than others, so the five d orbitals form two sets separated by an energy gap.Taught in 3.5 Coloured transition element complexes
delocalized electrons
Electrons that are not confined to one atom or one bond, but are shared over several or many atoms and can move among them.Taught in 2.5 Covalent network structures
dependent variable
The variable that is measured to see how it responds to changes in the independent variable; it is plotted on the vertical axis.Taught in 7.3 Graphs and data processing
dilution
Adding more solvent to a solution, which lowers its concentration while the amount of solute in moles stays the same, so C1V1=C2V2C_1V_1 = C_2V_2.Taught in 1.8 Concentration and Avogadro's law
dipole moment
A measure of charge separation, the partial charges multiplied by the distance between them, that also has a direction, so bond dipoles add as vectors.Taught in 2.4 Bond and molecular polarity
dipole-dipole force
The attraction between the permanent dipoles of neighbouring polar molecules, with the δ+\delta+ end of one near the δ−\delta- end of the next.Taught in 2.6 Intermolecular forces
direct proportionality
A relationship y=kxy = kx with kk constant, so doubling one variable doubles the other; its graph is a straight line through the origin.Taught in 7.3 Graphs and data processing
displacement reaction
A reaction in which a more reactive element takes the place of a less reactive one in a compound, releasing it. For example, chlorine displaces bromine from bromide ions.Taught in 3.2 Group trends and the oxides of elements
distillation
Separating a liquid from a mixture by boiling it and condensing the vapour, using differences in boiling point.Taught in 1.1 The particulate nature of matter
dynamic equilibrium
The state of a reversible reaction in a closed system where the forward and backward reactions continue at equal rates, so the concentrations of reactants and products stay constant.Taught in 5.8 Dynamic equilibrium and the equilibrium constant

E

effective nuclear charge
The net positive charge an outer electron feels once shielding by the inner electrons is allowed for, roughly the number of protons minus the number of inner electrons.Taught in 3.1 The periodic table and periodicity
electrical conductivity
The ability of a substance to carry an electric current, which needs charged particles free to move, such as ions in a molten or dissolved ionic compound, or delocalized electrons in a metal.Taught in 2.1 The ionic model
electrolyte
A liquid or solution that conducts electricity because it contains ions that are free to move, such as an ionic compound that is molten or dissolved in water.Taught in 6.11 Electrolytic cells
electrolytic cell
An electrochemical cell in which an external DC power supply drives a non-spontaneous redox reaction, converting electrical energy into chemical energy; its anode is positive and its cathode negative.Taught in 6.11 Electrolytic cells
electron
A negatively charged particle, relative charge −1-1, that occupies the space outside the nucleus; its mass is negligible compared with a proton's.Taught in 1.2 The nuclear atom and isotopes
electron affinity
The energy change when one mole of electrons is added to one mole of gaseous atoms to form gaseous 1− ions, as in Cl(g)+eX−→ClX−(g)\ce{Cl(g) + e- -> Cl^-(g)}; it is negative (energy is released) for most elements.Taught in 3.1 The periodic table and periodicity
electron configuration
How an atom's or ion's electrons are arranged in sublevels, written like 1s² 2s² 2p⁶ or in condensed form with a noble-gas core such as [Ar] 4s² 3d⁶; chromium and copper are the exceptions to the filling order up to Z=36Z = 36.Taught in 1.4 Sublevels, orbitals and electron configurations
electron domain
A region of electron density around a central atom: a lone pair, or the bond to one other atom, where a single, double or triple bond each count as one domain.Taught in 2.3 Shapes of molecules (VSEPR)
electron domain geometry
The arrangement in space of all the electron domains around a central atom, lone pairs included: linear, trigonal planar or tetrahedral for two, three or four domains, and at HL trigonal bipyramidal or octahedral for five or six.Taught in 2.3 Shapes of molecules (VSEPR)
electronegativity
The ability of an atom to attract the shared pair of electrons in a covalent bond towards itself; data booklet values run from 0.7 up to 4.0 for fluorine.Taught in 2.4 Bond and molecular polarity
electrophile
A reactant that accepts an electron pair from a nucleophile to form a new covalent bond; it can be positive, such as HX+\ce{H^+}, or neutral, such as BrX2\ce{Br2}.Taught in 6.16 Nucleophiles and electrophiles
electrophilic addition
A reaction in which an electrophile attacks the electron-rich C=C bond of an alkene and two atoms or groups add across the double bond.Taught in 6.16 Nucleophiles and electrophiles
electrophilic substitution
A reaction in which an electrophile replaces a hydrogen atom on a benzene ring, keeping the stable ring of delocalized electrons; for example, CX6HX6+NOX2X+→CX6HX5NOX2+HX+\ce{C6H6 + NO2^+ -> C6H5NO2 + H^+}.Taught in 6.20 Electrophilic substitution of benzene
electroplating
Coating an object with a thin layer of metal by electrolysis: the object is the cathode, where ions of the coating metal from the electrolyte are reduced, and the anode is usually a bar of that metal.Taught in 6.14 Electrolysis of aqueous solutions and electroplating
element
A substance that no chemical reaction can split into simpler substances; all its atoms have the same atomic number.Taught in 1.1 The particulate nature of matter
elementary step
A single event in a reaction mechanism: one collision between particles, or one particle breaking apart or rearranging.Taught in 5.5 Reaction mechanisms and the rate-determining step
emission spectrum
The wavelengths of light given out by excited atoms as their electrons fall to lower energy levels; for a gaseous element it is a line spectrum that identifies the element.Taught in 1.3 Emission spectra and energy levels
empirical formula
The formula showing the simplest whole-number ratio of the atoms of each element in a compound, such as CH\ce{CH} for benzene.Taught in 1.7 Empirical and molecular formulas
enantiomer
One of a pair of stereoisomers that are mirror images of each other and cannot be superimposed.Taught in 3.8 Stereoisomers
end point
The point in a titration at which the indicator changes colour; a good indicator makes it fall close to the equivalence point, but the two are different ideas.Taught in 6.3 Strong and weak acids, neutralization and pH curves
endothermic reaction
A reaction that transfers heat from the surroundings to the system, so the temperature of the surroundings falls and ΔH\Delta H is positive.Taught in 4.1 Measuring enthalpy changes
energy level
One of the fixed energies an electron in an atom can have; the main energy levels are numbered n=1,2,3,…n = 1, 2, 3, \dots outwards from the nucleus, and level nn holds at most 2n22n^{2} electrons.Taught in 1.3 Emission spectra and energy levels
energy profile
A graph of potential energy against reaction coordinate that shows the levels of the reactants and products and the energy barrier between them.Taught in 4.1 Measuring enthalpy changes
enthalpy change
The heat transferred between a system and its surroundings at constant pressure, ΔH\Delta H, usually given in kJ mol−1\pu{kJ mol-1}; negative when heat is given out.Taught in 4.1 Measuring enthalpy changes
enthalpy of atomization
The enthalpy change when one mole of gaseous atoms is formed from an element in its standard state, such as 12 ClX2(g)→Cl(g)\ce{1/2Cl2(g) -> Cl(g)}; it is positive.Taught in 4.4 Born–Haber cycles
entropy
A measure of how dispersed the matter and energy of a system are: the more ways the particles and their energy can be arranged, the higher the entropy, SS, measured in J K−1 mol−1\pu{J K-1 mol-1}.Taught in 4.6 Entropy
equilibrium constant
The value KK of the equilibrium expression for a reaction at equilibrium; a large KK means mostly products, a small KK mostly reactants, and, for a given equation, only a change of temperature changes it.Taught in 5.8 Dynamic equilibrium and the equilibrium constant
equilibrium law
The rule for writing KK from a balanced equation: product concentrations over reactant concentrations, each raised to the power of its coefficient.Taught in 5.8 Dynamic equilibrium and the equilibrium constant
equivalence point
The point in a titration at which the amounts of acid and base added are in the exact ratio of the balanced equation.Taught in 6.3 Strong and weak acids, neutralization and pH curves
excited state
An atom in which an electron has absorbed energy and moved up to a higher energy level than it occupies in the lowest-energy (ground) state.Taught in 1.3 Emission spectra and energy levels
exothermic reaction
A reaction that transfers heat from the system to the surroundings, so the temperature of the surroundings rises and ΔH\Delta H is negative.Taught in 4.1 Measuring enthalpy changes
expanded octet
More than eight electrons in the valence shell of a central atom, as in PClX5\ce{PCl5} or SFX6\ce{SF6}; only atoms in period 3 and below can have one.Taught in 2.8 Resonance, expanded octets and formal charge
experimental yield
The mass or amount of product actually obtained when the reaction is carried out.Taught in 5.2 Limiting reactants, yield and atom economy
extrapolation
Estimating a value by extending a graph or trend line beyond the range of the measured data; it is less reliable because the trend may not continue.Taught in 7.3 Graphs and data processing

F

Faraday constant
The charge carried by one mole of electrons, F=9.65⋅104 C mol−1F = \pu{9.65e4 C mol-1} (data booklet, section 2).Taught in 6.13 Standard electrode potentials
formal charge
The charge an atom would have if every bond were shared equally: valence electrons minus half the bonding electrons minus the non-bonding electrons; the preferred Lewis formula has formal charges closest to zero.Taught in 2.8 Resonance, expanded octets and formal charge
fractional uncertainty
The absolute uncertainty divided by the measured value; it has no unit and is also called the relative uncertainty.Taught in 7.2 Uncertainties, errors and significant figures
fragmentation
The breaking of a molecular ion in a mass spectrometer into a smaller positive ion, which is detected, and a neutral piece, which is not; the masses lost show which groups the molecule contains.Taught in 3.9 Mass spectrometry and infrared spectroscopy
fuel cell
A cell that converts the chemical energy of a fuel, such as hydrogen or methanol, directly into electrical energy, with the fuel and oxygen supplied continuously.Taught in 4.5 Energy from fuels
functional group
An atom or group of atoms in a molecule, such as −OH\ce{-OH} or C=O\ce{C=O}, that gives the compound its characteristic reactions and strongly affects its physical properties.Taught in 3.6 Organic formulas, functional groups and homologous series

G

gas constant
The constant RR in the ideal gas equation PV=nRTPV = nRT, equal to 8.31 J K−1 mol−1\pu{8.31 J K-1 mol-1} (data booklet).Taught in 1.9 Ideal gases
Gibbs energy
A quantity whose change, ΔG=ΔH−TΔS\Delta G = \Delta H - T\Delta S (in kJ mol−1\pu{kJ mol-1}), weighs a reaction's enthalpy change against its entropy change at absolute temperature TT; at constant temperature and pressure, a negative ΔG\Delta G means the change is spontaneous.Taught in 4.7 Gibbs energy and spontaneity
gradient
The steepness of a line: the change in the yy quantity divided by the change in the xx quantity, with units of the yy unit per xx unit, such as cm3 s−1\pu{cm3 s-1} for a rate.Taught in 7.3 Graphs and data processing
greenhouse effect
The warming of the Earth's surface and lower atmosphere because gases such as carbon dioxide, water vapour and methane absorb infrared radiation emitted by the surface and re-emit some of it back towards it.Taught in 4.5 Energy from fuels

H

half-equation
An equation for only the oxidation or only the reduction part of a redox reaction, showing the electrons lost or gained as eX−\ce{e-}.Taught in 6.8 Oxidation, reduction and half-equations
halogen
An element of group 17; fluorine, chlorine, bromine and iodine are reactive non-metals with seven valence electrons that form 1− ions.Taught in 3.1 The periodic table and periodicity
halogeno group
A halogen atom (F, Cl, Br or I) covalently bonded to a carbon atom, as in a halogenoalkane.Taught in 3.6 Organic formulas, functional groups and homologous series
halogenoalkane
A compound in which one or more hydrogen atoms of an alkane have been replaced by halogen atoms, such as chloroethane, CHX3CHX2Cl\ce{CH3CH2Cl}.Taught in 3.6 Organic formulas, functional groups and homologous series
Hess's law
The enthalpy change for a reaction depends only on where it starts and finishes, not on the route between them.Taught in 4.2 Bond enthalpies and Hess's law
heterolytic fission
The breaking of a covalent bond in which one fragment keeps both bonding electrons; a neutral molecule breaks into a positive ion and a negative ion.Taught in 6.16 Nucleophiles and electrophiles
homologous series
A family of compounds with the same functional group and general formula, in which each member has one more CHX2\ce{CH2} unit than the one before.Taught in 3.6 Organic formulas, functional groups and homologous series
homolytic fission
Breaking a covalent bond so that each atom keeps one of the two bonding electrons, which forms two radicals.Taught in 6.15 Radicals
Hund's rule
The rule that electrons in a sublevel occupy separate orbitals singly, with parallel spins, before any orbital takes a second electron.Taught in 1.4 Sublevels, orbitals and electron configurations
hybridization
The mixing of atomic orbitals on one atom to make a set of new, identical hybrid orbitals that point in the directions the atom's bonds and lone pairs take.Taught in 2.9 Sigma and pi bonds, and hybridization
hydrogen bond
The attraction between a hydrogen atom covalently bonded to N, O or F and a lone pair on a nearby N, O or F atom; usually between molecules, though it can form within a large molecule such as a protein, and it is not a covalent bond.Taught in 2.6 Intermolecular forces
hydrogenation
The addition of hydrogen, HX2\ce{H2}, across a carbon–carbon double or triple bond, usually with a nickel catalyst and heat; it is a reduction and lowers the degree of unsaturation.Taught in 6.12 Oxidation and reduction of organic compounds
hydrolysis
The breaking of a bond in a compound by reaction with water; it is the reverse of a condensation reaction.Taught in 2.12 Polymers
hydroxyl group
The −OH\ce{-OH} group covalently bonded to carbon, found in alcohols; it is not the hydroxide ion, OHX−\ce{OH-}.Taught in 3.6 Organic formulas, functional groups and homologous series

I

ideal gas
A model gas whose particles move randomly, have negligible volume, have no intermolecular forces between them and collide elastically.Taught in 1.9 Ideal gases
incomplete combustion
Burning of a carbon-containing fuel in a limited supply of oxygen, so some carbon forms carbon monoxide or soot (carbon) instead of carbon dioxide; carbon monoxide is toxic.Taught in 4.5 Energy from fuels
independent variable
The variable an experimenter changes on purpose; it is plotted on the horizontal axis.Taught in 7.3 Graphs and data processing
infrared active
Describes a molecular vibration that changes the molecule's dipole moment; only such vibrations absorb infrared radiation.Taught in 3.9 Mass spectrometry and infrared spectroscopy
integration trace
A stepped line on an NMR spectrum whose step heights are in the ratio of the areas under the signals, and so of the numbers of hydrogens in each environment.Taught in 3.10 Proton NMR and combined structural analysis
intermolecular force
An attraction between separate molecules; much weaker than a covalent bond, and the force overcome when a molecular substance melts or boils.Taught in 2.6 Intermolecular forces
interpolation
Estimating a value from a graph or trend line within the range of the measured data.Taught in 7.3 Graphs and data processing
inverse proportionality
A relationship y=kxy = \frac{k}{x} with kk constant, so doubling one variable halves the other and their product stays the same; its graph is a curve that approaches both axes without touching them.Taught in 7.3 Graphs and data processing
inversion of configuration
The flip of the three other groups on a carbon atom to the opposite side in an SN2 reaction, because the nucleophile attacks from the side opposite the leaving group.Taught in 6.18 Nucleophilic substitution mechanisms
ion
An atom or group of atoms with an overall charge, because it has gained or lost electrons.Taught in 1.2 The nuclear atom and isotopes
ion product constant of water
The equilibrium constant for the ionization of water, Kw=[HX+][OHX−]K_\mathrm{w} = [\ce{H^+}][\ce{OH^-}], which holds in every aqueous solution; it is 1.00⋅10−14 mol2 dm−6\pu{1.00e-14 mol2 dm-6} at 298 K and increases with temperature because the ionization is endothermic.Taught in 6.2 The pH scale and Kw
ionic bond
The electrostatic attraction between positive ions and negative ions; it acts equally in all directions, holding the ions in a lattice.Taught in 2.1 The ionic model
ionic radius
The radius of an ion; a cation is smaller than its atom and an anion is larger than its atom.Taught in 2.1 The ionic model
ionization
The formation of ions from neutral atoms or molecules, such as hydrogen chloride molecules forming HX3OX+\ce{H3O^+} and ClX−\ce{Cl^-} ions in water.Taught in 6.1 Brønsted–Lowry acids and bases
ionization energy
The first ionization energy is the energy needed to remove one mole of electrons from one mole of gaseous atoms in their ground state, forming gaseous 1+ ions, as in Na(g)→NaX+(g)+eX−\ce{Na(g) -> Na^+(g) + e-}; it is always positive.Taught in 3.1 The periodic table and periodicity
isotope
Atoms of the same element, with the same number of protons but different numbers of neutrons; they have the same chemical properties but different physical properties.Taught in 1.2 The nuclear atom and isotopes
IUPAC nomenclature
The naming system of the International Union of Pure and Applied Chemistry, which builds a compound's name from its parent chain, prefixes for branches and halogens, a suffix for the functional group, and locant numbers.Taught in 3.7 Naming organic compounds and structural isomers

K

kelvin
The SI unit of temperature, K, starting at absolute zero; a step of 1 K equals a step of 1 °C, and TT in K =t= t in °C +273.15+ 273.15.Taught in 1.1 The particulate nature of matter
ketone
A compound with a carbonyl group inside a carbon chain, bonded to a carbon on each side, such as propanone, CHX3COCHX3\ce{CH3COCH3}.Taught in 3.6 Organic formulas, functional groups and homologous series
kinetic molecular theory
The model that all matter is made of constantly moving particles, whose spacing, motion and attractions explain the states of matter and changes of state.Taught in 1.1 The particulate nature of matter

L

lattice enthalpy
The enthalpy change when one mole of an ionic solid is separated into its gaseous ions; it is always positive and is larger for ions with higher charges and smaller radii.Taught in 2.1 The ionic model
Le Châtelier's principle
If a system at dynamic equilibrium is disturbed by a change in concentration, pressure or temperature, the position of equilibrium shifts to partly oppose the change; only a change of temperature changes the value of KK.Taught in 5.9 Le Châtelier's principle
leaving group
The atom or group that breaks away from a carbon atom in a substitution, taking both electrons of its old bond with it, such as BrX−\ce{Br^-} from a bromoalkane.Taught in 6.16 Nucleophiles and electrophiles
Lewis acid
A species that accepts an electron pair to form a new bond, such as HX+\ce{H^+}, BFX3\ce{BF3} or a transition element cation.Taught in 6.17 Lewis acids and bases, and complex ions
Lewis base
A species that donates an electron pair to form a new bond, usually a lone pair, as in NHX3\ce{NH3}, HX2O\ce{H2O} or ClX−\ce{Cl^-}.Taught in 6.17 Lewis acids and bases, and complex ions
Lewis formula
A diagram of a molecule or ion that shows every valence electron, as bonding pairs between atoms and lone pairs on atoms, drawn as dots, crosses or lines.Taught in 2.2 Covalent bonds and Lewis formulas
ligand
A molecule or ion, such as HX2O\ce{H2O}, NHX3\ce{NH3} or ClX−\ce{Cl^-}, that donates a lone pair of electrons to a central metal ion to form a coordination bond; a ligand is a Lewis base.Taught in 3.4 Ionization energy trends and transition elements
limiting reactant
The reactant that is used up first in a reaction, so it sets the maximum amount of product that can form.Taught in 5.2 Limiting reactants, yield and atom economy
line of best fit
A single straight line or smooth curve drawn through plotted points so that they are scattered as evenly as possible on both sides of it, ignoring anomalous points.Taught in 7.3 Graphs and data processing
line spectrum
A spectrum made of separate lines at only certain wavelengths, with gaps between them, instead of an unbroken band of colours.Taught in 1.3 Emission spectra and energy levels
London (dispersion) force
The attraction between an instantaneous dipole in one molecule and the dipole it induces in a neighbour; present between all molecules and stronger with more electrons and more surface contact.Taught in 2.6 Intermolecular forces
lone pair
A pair of valence electrons that belongs to one atom only and is not shared in a bond; for example, the oxygen atom in water has two.Taught in 2.2 Covalent bonds and Lewis formulas

M

Markovnikov's rule
When a hydrogen halide or water adds to an unsymmetrical alkene, the H atom bonds mainly to the double-bond carbon that already has more H atoms, because the halogen or OH then sits on the carbon of the more stable carbocation.Taught in 6.19 Electrophilic addition
mass spectrum
A graph of relative abundance against mass-to-charge ratio, m/zm/z; for an element, each single-atom peak is an isotope and its height shows how common that isotope is.Taught in 1.2 The nuclear atom and isotopes
Maxwell-Boltzmann distribution
A graph of how the kinetic energies of the particles in a sample are spread out at one temperature: it starts at the origin, peaks at the most likely energy and tails off towards the energy axis without touching it, and its area stands for the total number of particles.Taught in 5.4 Activation energy and catalysts
metallic bond
The electrostatic attraction between a lattice of cations and the delocalized electrons around them; it acts in all directions.Taught in 2.10 The metallic model
mixture
Two or more elements or compounds together in proportions that can vary, not chemically combined, so physical methods can separate them.Taught in 1.1 The particulate nature of matter
mobile phase
The phase that moves through or over the stationary phase and carries the components with it, such as the liquid solvent in paper chromatography or TLC.Taught in 2.7 Chromatography
molar concentration
The amount of solute, in moles, in each cubic decimetre of solution (not of solvent), measured in mol dm−3\pu{mol dm-3} and written in square brackets, as in [NaCl][\ce{NaCl}].Taught in 1.8 Concentration and Avogadro's law
molar mass
MM: the mass of one mole of a substance, in g mol⁻¹. It has the same value as the relative formula mass, MrM_\text{r}, or the relative atomic mass for atoms.Taught in 1.6 The mole and molar mass
molar volume
The volume one mole of an ideal gas occupies at a stated temperature and pressure; at STP it is 22.7 dm3 mol−1\pu{22.7 dm3 mol-1} (data booklet).Taught in 1.9 Ideal gases
mole
The unit for amount of substance (mol). A mole of anything holds exactly the Avogadro constant's number of the stated particles, such as atoms, molecules or ions.Taught in 1.6 The mole and molar mass
molecular formula
The formula showing the actual number of atoms of each element in one molecule, such as CX6HX6\ce{C6H6} for benzene; it is a whole-number multiple of the empirical formula.Taught in 1.7 Empirical and molecular formulas
molecular geometry
The arrangement in space of the atoms around a central atom; lone pairs affect it but are not named in it, and it matches the electron domain geometry only when the central atom has no lone pairs.Taught in 2.3 Shapes of molecules (VSEPR)
molecular ion
The positive ion MX+\ce{M+} formed when a whole molecule loses one electron in a mass spectrometer; its m/zm/z value gives the relative molecular mass.Taught in 3.9 Mass spectrometry and infrared spectroscopy
molecularity
The number of reacting particles taking part in one elementary step: unimolecular (one), bimolecular (two) or termolecular (three, rare).Taught in 5.5 Reaction mechanisms and the rate-determining step

N

neutralization
A reaction in which an acid reacts with a base to form a salt, often with water.Taught in 6.3 Strong and weak acids, neutralization and pH curves
neutron
An uncharged particle in the nucleus of an atom, with relative mass 1; isotopes of an element differ in their number of neutrons.Taught in 1.2 The nuclear atom and isotopes
noble gas
An element of group 18, such as helium, neon or argon: a very unreactive gas of single atoms, whose outer sublevels are full.Taught in 3.1 The periodic table and periodicity
nucleophile
A reactant that donates an electron pair to an electron-poor atom to form a new covalent bond; it can be negative, such as OHX−\ce{OH^-}, or neutral, such as NHX3\ce{NH3}.Taught in 6.16 Nucleophiles and electrophiles
nucleophilic substitution
A reaction in which a nucleophile bonds to a carbon atom and replaces a leaving group, such as a halide ion, on that carbon.Taught in 6.16 Nucleophiles and electrophiles

O

octet rule
The tendency of atoms to lose, gain or share electrons until they have eight electrons in their valence shell (two for hydrogen); some molecules, such as BeClX2\ce{BeCl2}, break it.Taught in 2.2 Covalent bonds and Lewis formulas
optical activity
The ability of a substance to rotate the plane of plane-polarized light; under the same conditions, two enantiomers rotate it by the same angle in opposite directions.Taught in 3.8 Stereoisomers
order of reaction
The power to which a reactant's concentration is raised in the rate equation; the overall order is the sum of the orders for all the reactants.Taught in 5.6 Rate equations and orders of reaction
oxidation
Loss of electrons, or an increase in oxidation state; in many reactions it is also seen as gain of oxygen or loss of hydrogen.Taught in 6.8 Oxidation, reduction and half-equations
oxidation state
The charge an atom would have if every bond between different elements in its substance were ionic (a bond between identical atoms is shared equally), written with the sign first (such as +2+2 or −1-1); it is zero for an atom in an uncombined element.Taught in 3.3 Oxidation states
oxidizing agent
A species that oxidizes another by accepting its electrons, and so is itself reduced.Taught in 6.8 Oxidation, reduction and half-equations

P

parent chain
The longest continuous chain of carbon atoms that contains the main functional group (and any C=C bond); its length gives the stem of the name.Taught in 3.7 Naming organic compounds and structural isomers
partial charge
A charge smaller than a full ionic charge, written δ+\delta^{+} or δ−\delta^{-}, on an atom at either end of a polar bond.Taught in 2.4 Bond and molecular polarity
Pauli exclusion principle
The rule that one orbital holds at most two electrons, and two electrons sharing an orbital must have opposite spins.Taught in 1.4 Sublevels, orbitals and electron configurations
percentage change
The change in a value divided by its initial value and multiplied by 100; positive for an increase and negative for a decrease.Taught in 7.2 Uncertainties, errors and significant figures
percentage difference
The difference between two values divided by their mean and multiplied by 100, used when neither value is a reference.Taught in 7.2 Uncertainties, errors and significant figures
percentage error
The size of the difference between an experimental value and the accepted value, divided by the size of the accepted value (ignore any minus sign) and multiplied by 100.Taught in 7.2 Uncertainties, errors and significant figures
percentage uncertainty
The fractional uncertainty multiplied by 100, which lets you compare the uncertainties of different measurements.Taught in 7.2 Uncertainties, errors and significant figures
percentage yield
The experimental yield divided by the theoretical yield, multiplied by 100.Taught in 5.2 Limiting reactants, yield and atom economy
periodicity
The repeating pattern in properties such as atomic radius and ionization energy across each period and down each group of the periodic table.Taught in 3.1 The periodic table and periodicity
pH
A measure of how acidic a solution is: pH=−log⁡10[HX+]\mathrm{pH} = -\log_{10}[\ce{H^+}], with [HX+][\ce{H^+}] in mol dm−3\pu{mol dm-3}; it has no units, and because the scale is logarithmic a fall of 1 in pH means ten times more HX+\ce{H^+}.Taught in 6.2 The pH scale and Kw
photon
A single packet of electromagnetic radiation; its energy depends only on its frequency, E=hfE = hf, so higher-frequency light comes in more energetic photons.Taught in 1.3 Emission spectra and energy levels
pi bond
A covalent bond made by sideways overlap of two parallel p orbitals, so the shared electron density lies in two regions, above and below the line between the nuclei; it forms only alongside a sigma bond.Taught in 2.9 Sigma and pi bonds, and hybridization
pKa
The negative logarithm to base 10 of the acid dissociation constant, pKa=−log⁡10Ka\mathrm{p}K_\mathrm{a} = -\log_{10}K_\mathrm{a}; a smaller pKa means a stronger acid.Taught in 6.4 pOH, Ka and Kb
pOH
A measure of the hydroxide ion concentration of a solution: pOH=−log⁡10[OHX−]\mathrm{pOH} = -\log_{10}[\ce{OH^-}], with [OHX−][\ce{OH^-}] in mol dm−3\pu{mol dm-3}; it has no units, and at 298 K pH+pOH=14.00\mathrm{pH} + \mathrm{pOH} = 14.00.Taught in 6.4 pOH, Ka and Kb
polar molecule
A molecule with a net dipole moment, because it has polar bonds arranged so that their bond dipoles do not cancel.Taught in 2.4 Bond and molecular polarity
polyatomic ion
An ion made of two or more covalently bonded atoms that carries an overall charge and stays together as a unit, such as NHX4X+\ce{NH4^+} or SOX4X2−\ce{SO4^2-}.Taught in 2.1 The ionic model
polymer
A macromolecule made by joining a very large number of small molecules, called monomers, with covalent bonds.Taught in 2.12 Polymers
precision
How close repeated measurements of the same quantity are to each other.Taught in 7.2 Uncertainties, errors and significant figures
primary (voltaic) cell
An electrochemical cell that converts the energy of a spontaneous redox reaction into electrical energy. A primary cell is used until its reactants run out and cannot be recharged.Taught in 6.10 Primary and secondary cells
primary, secondary and tertiary
Classes of alcohols and halogenoalkanes set by how many carbon atoms are bonded to the carbon holding the OH or halogen (one or none, two, three); for amines, by how many carbon atoms are bonded to the nitrogen.Taught in 3.7 Naming organic compounds and structural isomers
processed data
Values calculated from raw measurements, such as a titre, a concentration or an enthalpy change; they carry the uncertainties of the readings they came from.Taught in 7.2 Uncertainties, errors and significant figures
propagation of uncertainty
Working out the uncertainty of a calculated result from its raw data: add absolute uncertainties when adding or subtracting, and add percentage uncertainties when multiplying or dividing.Taught in 7.2 Uncertainties, errors and significant figures
proton
A positively charged particle in the nucleus of an atom, with relative mass 1 and relative charge +1+1.Taught in 1.2 The nuclear atom and isotopes
proton NMR spectroscopy
A technique that places a sample in a strong magnetic field and records the radio waves its hydrogen nuclei absorb, showing how many different hydrogen environments a molecule has and how they are arranged.Taught in 3.10 Proton NMR and combined structural analysis

R

radical
An atom, molecule or ion with at least one unpaired electron, shown by a dot as in Cl∙\ce{Cl\bullet}; most radicals are highly reactive.Taught in 6.15 Radicals
random error
An unpredictable error that makes repeated readings scatter above and below the true value; repeating and averaging reduces its effect, and it lowers precision.Taught in 7.2 Uncertainties, errors and significant figures
rate constant
The constant kk in a rate equation: it changes with temperature but not with concentration, and its units depend on the overall order of the reaction.Taught in 5.6 Rate equations and orders of reaction
rate equation
An equation giving the rate of a reaction as the rate constant multiplied by each reactant concentration (and sometimes a catalyst's) raised to its order, such as rate=k[A]m[B]n\text{rate} = k[\text{A}]^{m}[\text{B}]^{n}; it can only be found by experiment.Taught in 5.6 Rate equations and orders of reaction
rate of reaction
How fast a reaction goes: the increase in a product's concentration, or the decrease in a reactant's, per unit time, usually in mol dm⁻³ s⁻¹. It is always a positive value.Taught in 5.3 Rates of reaction and collision theory
rate-determining step
The slowest step in a reaction mechanism, with the largest activation energy. It controls the overall rate, and its reactants (or those that form them in earlier fast steps) appear in the rate equation.Taught in 5.5 Reaction mechanisms and the rate-determining step
reaction intermediate
A species formed in one step of a mechanism and used up in a later step, so it is not in the overall equation. It is a real species and sits in a dip (a minimum) on the energy profile.Taught in 5.5 Reaction mechanisms and the rate-determining step
reaction mechanism
The series of elementary steps by which a reaction happens. The steps must add up to the overall equation and agree with the experimental rate equation.Taught in 5.5 Reaction mechanisms and the rate-determining step
reaction quotient
The value QQ of the equilibrium expression worked out with the concentrations a mixture has at a particular moment; if Q<KQ < K the mixture reacts forwards, if Q>KQ > K it reacts backwards, until Q=KQ = K.Taught in 5.10 The reaction quotient and equilibrium calculations
reactivity series
A list of metals in order of how easily they are oxidized to positive ions, with the most easily oxidized metal, the strongest reducing agent, at the top.Taught in 6.9 Reactivity of metals and halogens
recrystallization
Purifying a solid by dissolving it in a little hot solvent, filtering, then cooling so pure crystals form while soluble impurities stay in solution.Taught in 1.1 The particulate nature of matter
reducing agent
A species that reduces another by giving it electrons, and so is itself oxidized.Taught in 6.8 Oxidation, reduction and half-equations
reduction
Gain of electrons, or a decrease in oxidation state; in many reactions it is also seen as loss of oxygen or gain of hydrogen.Taught in 6.8 Oxidation, reduction and half-equations
reflux
Heating a reaction mixture in a flask fitted with a vertical condenser, so that vapour condenses and drips back into the flask and nothing boils away.Taught in 6.12 Oxidation and reduction of organic compounds
relative atomic mass
The weighted mean mass of the atoms of an element, relative to one twelfth of the mass of a carbon-12 atom, symbol ArA_\text{r}; it has no units.Taught in 1.2 The nuclear atom and isotopes
relative formula mass
MrM_\text{r}: the sum of the relative atomic masses of all the atoms in a formula, compared with one-twelfth of the mass of a carbon-12 atom. It has no units.Taught in 1.6 The mole and molar mass
resonance structure
One of two or more Lewis formulas for the same species that keep every atom in place but put the multiple bonds and lone pairs in different positions; the real species is a hybrid of them.Taught in 2.8 Resonance, expanded octets and formal charge
retardation factor
RFR_\text{F}: the distance a component moves from the baseline divided by the distance the solvent front moves from the baseline. It has no units and lies between 0 and 1.Taught in 2.7 Chromatography
reversible reaction
A reaction whose products can react to re-form the reactants, so it can go in both directions; it is written with the ⇌\rightleftharpoons arrow.Taught in 5.8 Dynamic equilibrium and the equilibrium constant

S

salt bridge
A tube or strip of filter paper holding a solution of an unreactive salt, such as potassium nitrate, that joins two half-cells. Its ions move between them to keep each solution electrically neutral, so the current keeps flowing.Taught in 6.10 Primary and secondary cells
salt hydrolysis
The reaction of an ion from a dissolved salt with water, forming HX3OX+\ce{H3O^+} or OHX−\ce{OH^-} ions; ions whose parent acid or base is weak do this, such as NHX4X+\ce{NH4^+} (acidic) and CHX3COOX−\ce{CH3COO^-} (basic), while ions from strong parents, such as ClX−\ce{Cl^-} and NaX+\ce{Na^+}, do not.Taught in 6.5 Salt solutions and pH curves
saturated
Describes an organic compound with only single bonds between its carbon atoms.Taught in 3.6 Organic formulas, functional groups and homologous series
secondary cell
A rechargeable cell: a spontaneous redox reaction produces electrical energy on discharge, and an external electrical supply reverses that reaction to recharge it.Taught in 6.10 Primary and secondary cells
shielding
The reduction in the nucleus's pull on an outer electron, caused by repulsion from the electrons in inner energy levels.Taught in 3.1 The periodic table and periodicity
sigma bond
A covalent bond made by head-on overlap of two orbitals, so the shared electron density lies on the line between the two nuclei; the first bond between any two atoms is a sigma bond.Taught in 2.9 Sigma and pi bonds, and hybridization
significant figures
The digits of a value that carry meaning: all non-zero digits, zeros between them, and zeros at the end of a number that has a decimal point, but not leading zeros.Taught in 7.2 Uncertainties, errors and significant figures
skeletal formula
A line drawing of a molecule in which every corner and line end is a carbon atom, hydrogens on carbon are left out, and all other atoms are written in.Taught in 3.6 Organic formulas, functional groups and homologous series
SN1 mechanism
A nucleophilic substitution in two steps: the carbon–halogen bond breaks first to give a carbocation (the slow, rate-determining step), then the nucleophile bonds to it; typical of tertiary halogenoalkanes, with rate =k[halogenoalkane]= k[\text{halogenoalkane}].Taught in 6.18 Nucleophilic substitution mechanisms
SN2 mechanism
A nucleophilic substitution in one concerted step: the nucleophile bonds to carbon from the side opposite the halogen as the carbon–halogen bond breaks; typical of primary halogenoalkanes, with rate =k[halogenoalkane][nucleophile]= k[\text{halogenoalkane}][\text{nucleophile}].Taught in 6.18 Nucleophilic substitution mechanisms
solubility
The amount of a substance that dissolves in a given amount of solvent at a stated temperature; ionic compounds are often soluble in water but not in non-polar solvents.Taught in 2.1 The ionic model
solute
The substance that dissolves in a solvent to make a solution.Taught in 1.1 The particulate nature of matter
solvent
The substance, usually a liquid, that a solute dissolves in to make a solution.Taught in 1.1 The particulate nature of matter
sp2 hybridization
Mixing one s and two p orbitals into three sp² orbitals, found on an atom with three electron domains: trigonal planar, 120∘120^{\circ} apart, with one p orbital left over that can form a pi bond.Taught in 2.9 Sigma and pi bonds, and hybridization
sp3 hybridization
Mixing one s and three p orbitals into four sp³ orbitals, found on an atom with four electron domains: tetrahedral, with angles of about 109.5∘109.5^{\circ}.Taught in 2.9 Sigma and pi bonds, and hybridization
specific heat capacity
The energy needed to raise the temperature of 1 g\pu{1 g} of a substance by 1 K\pu{1 K}, cc, in J g−1 K−1\pu{J g-1 K-1}; for water it is 4.18 J g−1 K−1\pu{4.18 J g-1 K-1}, used in Q=mcΔTQ = mc\Delta T.Taught in 4.1 Measuring enthalpy changes
splitting pattern
The cluster of peaks a high-resolution NMR signal splits into: nn hydrogens on the adjacent carbon atoms, not equivalent to the hydrogen giving the signal, split it into n+1n + 1 peaks (singlet, doublet, triplet, quartet); an O–H hydrogen is usually a singlet.Taught in 3.10 Proton NMR and combined structural analysis
spontaneous reaction
A change that, once started, continues on its own under the stated conditions; at constant temperature and pressure its ΔG\Delta G is negative, though it may still be very slow.Taught in 4.7 Gibbs energy and spontaneity
standard cell potential
The potential difference of a cell under standard conditions, Ecell⊖=Ecathode⊖−Eanode⊖E^\ominus_\text{cell} = E^\ominus_\text{cathode} - E^\ominus_\text{anode}; a positive value means the reaction is spontaneous as written under standard conditions.Taught in 6.13 Standard electrode potentials
standard electrode potential
The potential, E⊖E^\ominus in volts, of a half-cell under standard conditions measured against the standard hydrogen electrode, written for the reduction; the more positive it is, the more easily the oxidized species is reduced.Taught in 6.13 Standard electrode potentials
standard enthalpy change of combustion
The enthalpy change, ΔHc⊖\Delta H_\text{c}^\ominus, when one mole of a substance burns completely in oxygen with all reactants and products in their standard states; it is always negative.Taught in 4.5 Energy from fuels
standard enthalpy change of formation
The enthalpy change, ΔHf⊖\Delta H_\text{f}^\ominus, when one mole of a substance is formed from its elements in their standard states under standard conditions; it is zero for an element in its standard state.Taught in 4.3 Enthalpies of formation and combustion
standard enthalpy change of reaction
ΔH⊖\Delta H^\ominus: the enthalpy change for a reaction as written, at 100 kPa\pu{100 kPa} and a stated temperature (usually 298 K\pu{298 K}), with every substance in its standard state.Taught in 4.1 Measuring enthalpy changes
standard hydrogen electrode
The reference half-cell, hydrogen gas at 100 kPa\pu{100 kPa} over platinum in 1.00 mol dm−3\pu{1.00 mol dm-3} HX+(aq)\ce{H^+(aq)} at 298 K\pu{298 K}, whose potential is set at 0.00 V\pu{0.00 V} by convention.Taught in 6.13 Standard electrode potentials
standard solution
A solution whose concentration is known accurately, usually made by dissolving a weighed mass of solute and making it up to the mark in a volumetric flask.Taught in 1.8 Concentration and Avogadro's law
standard temperature and pressure
STP: 273.15 K\pu{273.15 K} and 100 kPa\pu{100 kPa}, the conditions for the data-booklet molar volume; not the 298.15 K\pu{298.15 K} standard state used for thermochemical data.Taught in 1.9 Ideal gases
state symbols
Labels after each formula in an equation giving its state: (s) solid, (l) liquid, (g) gas and (aq) dissolved in water.Taught in 1.1 The particulate nature of matter
stationary phase
The phase that stays fixed and holds components back by attracting them, such as the silica layer on a TLC plate or the water held in the fibres of chromatography paper.Taught in 2.7 Chromatography
stereoisomer
One of two or more compounds with the same atoms joined in the same order by the same types of bond, but arranged differently in space.Taught in 3.8 Stereoisomers
stoichiometry
The quantitative relationship between the amounts of reactants and products in a reaction, given by the mole ratio in the balanced equation.Taught in 5.1 Chemical equations and reacting quantities
strong acid
An acid that is completely ionized in aqueous solution, such as HCl\ce{HCl}, HNOX3\ce{HNO3} or HX2SOX4\ce{H2SO4}; strong describes the extent of ionization, not the concentration.Taught in 6.3 Strong and weak acids, neutralization and pH curves
strong base
A base that is completely ionized in aqueous solution, such as the group 1 hydroxides.Taught in 6.3 Strong and weak acids, neutralization and pH curves
structural formula
A formula that shows which atom is bonded to which: a full structural formula draws every atom and bond, and a condensed one groups the atoms on each carbon, as in CHX3CHX2OH\ce{CH3CH2OH}.Taught in 3.6 Organic formulas, functional groups and homologous series
structural isomer
One of two or more compounds with the same molecular formula but atoms joined in a different order, such as butane and 2-methylpropane.Taught in 3.7 Naming organic compounds and structural isomers
sublevel
A subdivision of a main energy level, labelled s, p, d or f; in atoms with more than one electron their energies within one level increase in that order, and they contain 1, 3, 5 and 7 orbitals.Taught in 1.4 Sublevels, orbitals and electron configurations
substitution reaction
A reaction in which one atom or group in a molecule is replaced by another, such as a hydrogen atom of an alkane by a halogen atom.Taught in 6.15 Radicals
successful collision
A collision between reactant particles with energy equal to or greater than the activation energy and the proper orientation, so that they react.Taught in 5.3 Rates of reaction and collision theory
successive ionization energy
The energy needed to remove each further electron from an atom in turn (first, second, third and so on), always from gaseous particles; a very large jump between two values shows that the next electron comes from a new main energy level closer to the nucleus.Taught in 1.5 Ionization energy
system
The reactants and products being studied in a reaction; everything outside them, such as the water, container and air, is the surroundings.Taught in 4.1 Measuring enthalpy changes
systematic error
An error that shifts every reading the same way, such as an unzeroed balance or heat loss; repeating does not reduce it, and it lowers accuracy.Taught in 7.2 Uncertainties, errors and significant figures

T

tangent
A straight line that touches a curve at one point and has the same gradient there. On a concentration–time graph its gradient gives the rate at that time.Taught in 5.3 Rates of reaction and collision theory
temperature
A measure of the average kinetic energy of the particles in a substance; it is not the same as heat.Taught in 1.1 The particulate nature of matter
theoretical yield
The maximum amount of product that could form, calculated from the limiting reactant and the balanced equation.Taught in 5.2 Limiting reactants, yield and atom economy
titration
A technique in which one solution is added from a burette to a measured volume of another until the reaction is just complete, used to find an unknown concentration.Taught in 6.3 Strong and weak acids, neutralization and pH curves
transition element
An element with a partly filled d sublevel in its atom or in at least one of its common ions; zinc is not one, because its atom and its ZnX2+\ce{Zn^2+} ion both have a full 3d sublevel. Scandium fits this definition, because its atom has one 3d electron, though some books leave it out.Taught in 2.10 The metallic model
transition state
The highest-energy arrangement of atoms in an elementary step, with bonds partly broken and partly formed. It sits at a peak of the energy profile and cannot be isolated. Also called the activated complex.Taught in 5.5 Reaction mechanisms and the rate-determining step

U

uncertainty bar
A line drawn through a plotted point, extending by the absolute uncertainty on each side, to show the range in which the true value is likely to lie.Taught in 7.3 Graphs and data processing
unpaired electron
An electron alone in an orbital, with no partner of opposite spin; atoms or ions with unpaired electrons are attracted into a magnetic field.Taught in 1.4 Sublevels, orbitals and electron configurations
unsaturated
Describes an organic compound with at least one carbon–carbon double or triple bond, across which other atoms can add.Taught in 3.6 Organic formulas, functional groups and homologous series

V

valence electron
In a main-group atom, an electron in the outermost (highest) main energy level; for example, selenium has six, in 4s and 4p.Taught in 1.4 Sublevels, orbitals and electron configurations
van der Waals forces
The umbrella term for London (dispersion), dipole–induced dipole and dipole–dipole forces; it does not include hydrogen bonding.Taught in 2.6 Intermolecular forces
variable oxidation state
The ability of an element to form compounds in which it has two or more different oxidation states, as iron does in FeClX2\ce{FeCl2} and FeClX3\ce{FeCl3}. Transition elements show it because their 4s and 3d electrons are close in energy, so successive ionization energies rise without a large jump.Taught in 3.4 Ionization energy trends and transition elements
VSEPR model
Valence shell electron pair repulsion: the electron domains around a central atom repel each other and spread as far apart as possible, which sets the shape of the molecule.Taught in 2.3 Shapes of molecules (VSEPR)

W

wavelength
The distance from one peak of a wave to the next, symbol λ\lambda; for electromagnetic radiation a longer wavelength means a lower frequency and less energy per photon.Taught in 1.3 Emission spectra and energy levels
wavenumber
The number of waves in one centimetre, 1λ\frac{1}{\lambda}, in cm−1\pu{cm-1}; IR absorptions are labelled by wavenumber, and a larger wavenumber means a higher frequency and energy.Taught in 3.9 Mass spectrometry and infrared spectroscopy
weak acid
An acid that is only partially ionized in aqueous solution, so its solution holds an equilibrium mixture of un-ionized molecules and ions, as for ethanoic acid.Taught in 6.3 Strong and weak acids, neutralization and pH curves
weak base
A base that is only partially ionized in aqueous solution, such as ammonia or an amine.Taught in 6.3 Strong and weak acids, neutralization and pH curves