Rates of reaction and collision theory
In a minute
The tells you how fast a reactant is used up or a product forms. You read it from the gradient of a to a concentration–time graph. explains it: particles react only when they collide with enough energy and the right orientation, so anything that makes those collisions more frequent speeds the reaction up.
You'll be able to
- Calculate a rate of reaction from a change in concentration, volume or mass over time, with correct units.
- Determine the rate at a given time from the gradient of a tangent to a graph.
- Outline ways of following a reaction, with time as either the independent or the dependent variable.
- Explain how the average kinetic energy of particles depends on the in , and why a collision needs enough energy and the proper orientation.
- Predict and explain how concentration, pressure, surface area, temperature and a catalyst change the rate.
- Identify the variables to control in a rate investigation, and spot random and systematic error on a graph.
Before you start3 quick questions on what this builds on
Revise first: 1.1 The particulate nature of matter, 1.8 Concentration and Avogadro's law and 1.9 Ideal gases
Measuring a rate of reaction
Square brackets mean concentration, so the usual unit of is . A reactant's concentration falls, so the minus sign keeps the rate positive. Change over an interval divided by the time taken is the **average rate** for that interval. The two forms give the same number only when the reactant and product have equal coefficients.
Try it first, then reveal one step at a time.
- Change in concentration: , negative because iodide is a reactant.
- Rate .
Two iodide ions react for each formed, so falls twice as fast as rises. Always say which species a rate refers to.
Concentrations are rarely measured directly. Instead you follow a property that changes with them: gas volume in a gas syringe, mass lost as a gas escapes from a flask on a balance, gas pressure in a sealed flask, colour in a colorimeter, or pH or conductivity when ions are used up or made. The rate then has that property's unit, such as or .
Usually time is the **independent variable**: you take readings at set times and plot a curve. Sometimes time is the **dependent variable**: you measure how long a fixed change takes, such as a precipitate hiding a cross under the flask. Then is a measure of the average rate.
The rate at one instant is the gradient of the curve at that time. You find it with a : a straight line that just touches the curve there. Read two points far apart on the tangent itself. The tangent at gives the **initial rate**.
Try it first, then reveal one step at a time.
- Gradient .
- A is a reactant, so the gradient is negative; the rate is its size. The intercept was read to 2 significant figures, so give 2.
Collision theory
The says particles are always moving, with a spread of energies. Their average kinetic energy is proportional to the temperature in kelvin: double in kelvin and the average kinetic energy doubles. This does not work in Celsius, whose zero is not zero energy.
explains why most collisions don't cause reaction. The , , is the minimum collision energy needed to start breaking bonds; with less, the particles bounce apart. Orientation matters too: bonds can only break and form where the right atoms meet.
The rate depends on how many happen per unit time.
Try it first, then reveal one step at a time.
- Convert to kelvin: and .
- Factor Using Celsius would give the wrong factor of 4.
Try it first, then reveal one step at a time.
- Marking point 1: the energy condition, naming the activation energy.
- Marking point 2: only a small proportion of collisions meet it.
- Marking point 3: the orientation condition, for this reaction.
- A collision only leads to reaction if its energy is equal to or greater than the activation energy. Only a small proportion of collisions have this much energy. The molecules must also collide with the proper orientation, with the carbon atom of striking an oxygen atom of . Other collisions do not break bonds, and the molecules bounce apart.
What changes the rate
**Concentration:** more particles per , so more frequent collisions.
**Pressure:** only for gases. Squeezing a gas into a smaller volume raises its pressure and concentration together (for an at constant temperature, halving the volume doubles both), so collisions are more frequent. When all the reactants are dissolved, the pressure of the gas above the solution has no effect.
**Surface area:** only surface particles of a solid can be hit. A powder exposes more of them than lumps, so collisions with the solid are more frequent.
**Temperature:** particles move faster and collide a little more often. Much more important, a greater proportion of collisions have energy . That is why, near room temperature, a rise can roughly double a rate although the average kinetic energy rises by only about 3%.
**Catalyst:** a provides an alternative route with lower , so a greater proportion of collisions succeed. It is not used up; 5.4 explains how.
Try it first, then reveal one step at a time.
- Particles first: what happens to their energy?
- Link it to the activation energy, the main effect, then add collision frequency.
- At the higher temperature the particles have a greater average kinetic energy. So a greater proportion of collisions have energy equal to or greater than the activation energy. The particles also collide more frequently. There are more successful collisions per unit time, so the rate increases.
Try it first, then reveal one step at a time.
- Marking points 1 and 2: larger surface area, so more frequent collisions and a faster start (curve P).
- Marking point 3: the amount of the limiting reactant is unchanged.
- The powder has a larger surface area, so acid particles collide with the zinc more frequently. There are more successful collisions per unit time, so the initial rate increases, as in curve P. The final volume of hydrogen is the same, because the amount of zinc, the limiting reactant, is unchanged.
To test one factor fairly, change only that factor. Control the amounts and concentrations of the other reactants, the mass and particle size of any solid, the temperature, stirring and apparatus. Use deionized water, as ions in tap water could react.
A graph of results can reveal errors. scatters points either side of the best-fit line; repeats reduce it. A shifts every point the same way, so, for example, a line that should pass through the origin misses it.
Common mistakes
- Writing "more collisions" instead of more frequent collisions, or more collisions per unit time.
- Explaining a temperature rise only by "particles have more energy", without the greater proportion of collisions with energy .
- Drawing a line through two data points instead of a tangent touching the curve at one time.
- Quoting a negative rate for a reactant whose concentration is falling.
- Taking a ratio of Celsius temperatures when comparing kinetic energies.
- Expecting a powder, a warmer mixture or a catalyst to give more product. For a reaction that goes to completion, they change how fast the product forms, not how much.
Exam tips
- "Determine" a rate from a graph: draw a tangent at the time asked, read two well-separated points on it, show , and give a positive answer with units.
- "Explain" a rate change in three steps: what happens to the particles, how that changes the frequency of successful collisions, and the effect on the rate.
- In Paper 1A pressure options, check whether any reactant is a gas before choosing pressure as a factor.
- In Paper 1B data questions, say which variables were controlled and why, and name the method of measuring the rate.
Key takeaways
Practise this
62 past-paper questions on Collision theory and rate factors in the Chemistry HL bank, each with a mark scheme and a worked explanation.