Primary and secondary cells
In a minute
In every electrochemical cell, happens at the and at the . A turns a spontaneous redox reaction into electricity, with a joining its two half-cells. A can be recharged: electrical energy runs its reaction backwards.
You'll be able to
- Identify the anode and cathode, and give their signs in voltaic and electrolytic cells.
- Describe how to build a primary cell from two metal/metal half-cells, and explain the flow in the wire and the ion movement in the salt bridge.
- Deduce the charging reactions of a secondary cell from its discharge reactions, and the reverse.
- Discuss the advantages and disadvantages of primary cells, secondary cells and .
Before you start3 quick questions on what this builds on
Revise first: 1.2 The nuclear atom and isotopes, 2.1 The ionic model, 3.3 Oxidation states, 4.5 Energy from fuels, 6.8 Oxidation, reduction and half-equations and 6.9 Reactivity of metals and halogens
Anode and cathode
An electrochemical cell has two electrodes in contact with an electrolyte. It keeps the two halves of a redox reaction apart: one electrode hands to the external circuit, and the other takes them back.
The name comes from the reaction, so it is the same in every cell. The sign depends on the type of cell.
**Voltaic cell** (it makes electricity): the anode is negative and the cathode is positive. Oxidation at the anode releases electrons, which pile up there and make it negative.
**Electrolytic cell** (it uses electricity, 6.11): the anode is positive and the cathode is negative. The power supply pulls electrons out of the anode and pushes them into the cathode.
Try it first, then reveal one step at a time.
- The more reactive metal, magnesium, is oxidized, so the magnesium electrode is the anode.
- Reduction happens at the iron electrode, the cathode: ions gain two electrons.
- Check the charge: on the left, on the right.
Try it first, then reveal one step at a time.
- : the chloride ions lose electrons.
- Name the electrode from the reaction, then give the sign for an electrolytic cell.
- The chloride ions lose electrons, so this is oxidation and the electrode is the anode. In an electrolytic cell the anode is connected to the positive terminal of the power supply, so it is positive.
Building a primary (voltaic) cell
A simple voltaic cell is built from two half-cells. Each is a metal electrode dipped in a solution of its own , such as nickel in . A wire joins the two electrodes through a voltmeter or a lamp: this is the external circuit. A salt bridge joins the two solutions.
**Which electrode is which?** The metal higher in the loses electrons more easily, so it is oxidized: it is the anode. Nickel is more reactive than copper, so nickel is the anode, . At the copper cathode, .
**Electrons** flow through the external wire from the anode to the cathode: from negative to positive. They never travel through the solutions or the salt bridge.
**Ions** carry the charge inside the cell. The anode solution gains , and the cathode solution loses . So () move out of the salt bridge towards the anode, and cations () move towards the cathode. Without the salt bridge, charge would build up in each beaker and the current would stop.
Try it first, then reveal one step at a time.
- Aluminium is the anode: . Tin is the cathode: .
- Make the electrons equal, 6: multiply the anode equation by 2 and the cathode equation by 3.
- Add them and cancel the . Charge: on the left, on the right.
Try it first, then reveal one step at a time.
- Use the reactivity series to find the anode.
- Electrons go through the wire; ions go through the salt bridge to balance the charge in each beaker.
- Nickel is more reactive than copper, so nickel atoms are oxidized and the nickel electrode is the anode. Electrons flow through the external wire from the nickel anode to the copper cathode, where copper(II) ions are reduced. In the salt bridge, nitrate ions move towards the nickel half-cell, balancing the charge of the nickel(II) ions formed. Potassium ions move towards the copper half-cell, replacing the charge of the copper(II) ions removed.
Burning a fuel and running it in a fuel cell are the same exothermic redox reaction (4.5). In combustion the fuel and oxygen meet, electrons pass directly between them, and the energy comes out as heat; a power station must then turn that heat into electricity, losing much of it. A cell keeps oxidation and reduction apart, so the electrons are forced through the wire: chemical energy becomes electrical energy directly.
Secondary (rechargeable) cells
Discharging, a secondary cell is a voltaic cell. Charging, it is an electrolytic cell: the charger pushes electrons back the other way. So each charging half-equation is a discharge half-equation written in reverse.
A **lead–acid** battery (in petrol cars) has plates of lead, , and lead(IV) oxide, , in sulfuric acid. On discharge both plates turn into lead(II) sulfate. In , lead goes from to at one plate and from to at the other.
The lead plate stays negative throughout. On discharge it is the anode (oxidation); on charging it is the cathode (reduction), joined to the charger's negative terminal. This fits the signs from the first section.
Why can these reactions be reversed? The discharge products stay where they formed: is insoluble and sticks to the plates, so charging can turn it back. If a product escaped as a gas or dissolved and drifted away, the cell would be hard to recharge.
In a **lithium-ion** cell (phones, laptops, electric cars), lithium is oxidized at the negative electrode on discharge. ions travel through the electrolyte to the positive electrode while electrons travel through the external circuit. Charging drives both back.
Try it first, then reveal one step at a time.
- Charging reverses the discharge reaction: swap the two sides.
- Electrons are now on the left, so they are gained: reduction.
- : reduction.
Try it first, then reveal one step at a time.
- Reverse both: and .
- Double the second to match the 2 electrons, then add.
- Cancel the and the on both sides.
Primary cells, secondary cells and fuel cells
**Primary cells** (such as alkaline cells in a remote control). Advantages: cheap, ready to use, and they keep their charge for years in storage. Disadvantages: used once, then thrown away, which wastes materials and can release metals from landfill; expensive per unit of energy.
**Secondary cells** (lead–acid, lithium-ion). Advantages: recharged hundreds of times, so less waste and a lower cost over their life. Disadvantages: higher cost to buy; charging takes time; capacity fades with each cycle; some contain toxic lead or cadmium, and lithium-ion cells can catch fire if damaged. The charging electricity may itself come from fossil fuels.
**** (4.5). Advantages: they run for as long as fuel and oxygen are supplied, with no recharging; a hydrogen–oxygen cell gives only water; they are more efficient than burning the fuel. Disadvantages: hydrogen is hard to store and transport, the electrodes need expensive catalysts such as platinum, and most hydrogen is still made from fossil fuels.
Try it first, then reveal one step at a time.
- Advantage: think about how each is refilled.
- Disadvantage: think about the hydrogen itself.
- Advantage: the fuel cell does not need recharging; it runs as long as hydrogen is supplied, so refuelling is quick. Disadvantage: hydrogen is difficult to store and transport, because the gas must be compressed in strong tanks.
Try it first, then reveal one step at a time.
- Compare how much energy each device uses.
- Match each need to an advantage from the lists above.
- A smoke alarm draws a tiny current, so a primary cell lasts for years; its long shelf life, low price and no need for charging suit the alarm. A phone uses far more energy each day, so a primary cell would run out quickly and be thrown away. A secondary cell can be recharged hundreds of times, which costs less over its life and creates less waste.
Common mistakes
- Saying electrons flow through the salt bridge or the solutions. Electrons use the wire; ions use the salt bridge.
- Making the anode negative in every cell. It is negative only in a voltaic cell.
- Choosing the less reactive metal as the anode. The more reactive metal is oxidized.
- Writing a charging half-equation in the same direction as discharge, or forgetting to balance the electrons before adding.
Exam tips
- "Identify" an electrode: name it from the reaction (oxidation means anode), then give the sign for that type of cell.
- "Explain" ion movement in a salt bridge: state which ions move to which half-cell, and say they keep the solutions neutral. "Completes the circuit" alone does not score.
- "Deduce" charging reactions: reverse each discharge half-equation, keep the electrons, and balance the charge.
- Paper 1A often asks for anode, cathode and both signs in one option: check all four.
Key takeaways
Practise this
74 past-paper questions on Electrochemical cells and potentials in the Chemistry HL bank, each with a mark scheme and a worked explanation.