Polymers
In a minute
A is a huge molecule made by joining thousands of small molecules, called monomers, into a chain. Alkenes join into when their double bonds open, and you'll learn to draw the repeating unit and work back to the monomer. At HL, monomers with two functional groups join into , such as polyesters and polyamides.
You'll be able to
- Describe polymers as macromolecules made from monomers, and give natural and synthetic examples.
- Explain the properties of plastics, including biodegradability, from their structure.
- Draw an addition polymer's repeating unit from its monomer, and deduce the monomer from a chain.
- Explain why addition polymerization has an atom economy of 100%.
- Draw the repeating unit of a polyester or polyamide from its monomers, and identify the small molecule released.
- Explain that biological macromolecules form by and break down by .
Before you start3 quick questions on what this builds on
Revise first: 2.2 Covalent bonds and Lewis formulas and 2.6 Intermolecular forces
Monomers, polymers and plastics
Picture a chain of paper clips thousands long. It behaves very differently from one clip, yet it is made of nothing else.
The repeating unit is the smallest piece of the chain that, repeated over and over, gives the whole polymer.
Natural polymers include starch and cellulose (from glucose), proteins (from amino acids), DNA and rubber. Synthetic polymers, made in industry, include poly(ethene), PVC, PTFE, nylon and polyesters. Most plastics are synthetic polymers.
The chains in a sample have different lengths, so a plastic softens over a range of temperatures, not at one sharp point. Its other properties also come from its structure.
1. Strong solids: long chains tangle, and the between them add up.
2. Mouldable when hot (most plastics): heating overcomes the forces between chains, so they slide past each other. Thermosets, whose chains are cross-linked by covalent bonds, do not soften.
3. Insulators: there are no ions or delocalized electrons, so no charged particles can move.
4. Low density: they are made of light atoms, mainly carbon and hydrogen.
5. Unreactive: and bonds are strong and non-polar or nearly so, so few substances attack them.
Poly(ethene) chains attract only by , which grow as chains lengthen. Chains with or groups, such as proteins and nylon, also form between chains.
Try it first, then reveal one step at a time.
- Both substances are non-polar, so only London (dispersion) forces act between their molecules.
- Compare the sizes: a poly(ethene) chain contains thousands of ethene units, so it has far more electrons.
- Link size to force strength, and force strength to the energy needed to separate the molecules.
- Ethene and poly(ethene) are both non-polar, so only London (dispersion) forces act between their molecules. Poly(ethene) chains are much larger than ethene molecules and have many more electrons. So the London forces between poly(ethene) chains are much stronger. More energy is needed to overcome them, so poly(ethene) is a solid at room temperature. No covalent bonds are broken when either substance changes state.
A biodegradable material is one that microorganisms, such as bacteria, can break down.
Try it first, then reveal one step at a time.
- Name the bonds in the chain: poly(ethene) is a long chain of groups.
- Say what kind of bonds they are: strong and non-polar.
- Link this to microorganisms: their enzymes break down polar links, and there are none.
- Poly(ethene) chains contain only carbon–carbon and carbon–hydrogen bonds. These covalent bonds are strong. They are also non-polar or nearly so ( for is only 0.4), so there is no strongly polar site for water or enzymes to attack. So microorganisms cannot break the chains down, and the plastic is not biodegradable.
Chains with polar links containing oxygen or nitrogen, as in starch and proteins, can be split by water and enzymes. So they biodegrade.
Addition polymers
, such as ethene, contain a double bond. One of its two bonds can break, freeing each carbon to bond to another molecule.
In an of an alkene, the becomes a single bond. In addition polymerization, thousands of alkene molecules add to each other in a long chain.
For ethene: , where is large.
To draw the repeating unit, join the two carbons of the by a single bond. Keep every group on its own carbon, as a side group, and add an open bond at each end. Brackets and are optional.
Try it first, then reveal one step at a time.
- The double bond is between the carbon and the carbon. These two carbons form the chain.
- The first carbon keeps its two H atoms. The second keeps one H and the group, written as a side group: .
- Join the two carbons by a single bond and add an open bond at each end.
To deduce the monomer, work backwards: find the two-carbon repeat and put the double bond back.
Try it first, then reveal one step at a time.
- Find the repeat: the pattern , repeats, so the repeating unit is .
- Both chlorine atoms sit on the same carbon. Keep them there.
- Put a double bond between the two carbons and remove the open bonds.
- Check: the monomer, 1,1-dichloroethene, has the same atoms as the repeating unit, .
compares the mass of the wanted product with the total mass of reactants. In addition polymerization the polymer is the only product, so it is 100%.
Try it first, then reveal one step at a time.
- , using values from the data booklet (section 7).
- No atoms are lost in addition polymerization, so each monomer adds its full mass to the chain.
- Number of units
- Round to 3 significant figures.
Condensation polymers HL only
Some monomers have no . Instead, each has two , usually one at each end. A group on one monomer reacts with a group on the next, releasing a small molecule.
With only one functional group, a monomer could join one neighbour and the chain would stop.
A polyester forms from a diol, with two groups, and a dicarboxylic acid, with two groups. Each reacts with an to form an ester link, , and a water molecule.
A polyamide forms from a diamine, with two groups, and a dicarboxylic acid. Each reacts with an to form an amide link, , and a water molecule.
One monomer with an (or ) at one end and a at the other can polymerize on its own.
For the repeating unit, remove from each acid group and from each alcohol or amine group, then join what is left. Inside a condensed chain, means .
Try it first, then reveal one step at a time.
- Remove from both acid groups: .
- Remove from both alcohol groups: .
- Join the two pieces through an ester link, , and leave an open bond at each end.
- Check: one acid and one diol lose two water molecules, so the unit is .
Try it first, then reveal one step at a time.
- The monomer has an amine group at one end and a carboxyl group at the other, so each molecule joins the next by an amide link.
- Remove from the and from the . That is one water molecule per unit.
- Write what is left with an open bond at each end. The open bonds join to form the amide link with the next unit.
The biological macromolecules in this course form by condensation: proteins from amino acids (amide links, called peptide bonds), starch and cellulose from glucose, and DNA from nucleotides.
reverses condensation: water adds across each link and the polymer breaks into monomers. Digestion and biodegradable plastics both depend on it.
Try it first, then reveal one step at a time.
- Find the amide link, , between the two halves.
- Add across it: goes to the carbon and goes to the nitrogen.
- The products are glycine, , and alanine, .
- Check: each side contains in total.
Common mistakes
- Leaving the double bond in the repeating unit. The becomes a single bond when the chain forms.
- Leaving out the open bonds at each end of a repeating unit. Brackets and are optional; the open bonds are not.
- Putting a side group into the main chain, as in . Only the two carbons of the double bond form the chain.
- Putting groups on the wrong carbons of a monomer. comes from , not .
- Writing "environmentally friendly" for biodegradable. Say whether microorganisms can break the chains down, and why.
Exam tips
- "Draw" or "represent" a repeating unit: show the two-carbon chain with every atom and group, and an open bond at each end. Brackets and earn nothing extra.
- "Deduce" the monomer: a chain section may show several repeating units. Mark off two carbons at a time, then put the double bond back.
- "Explain" a property of a plastic: name the force between chains, say how chain length or polarity affects its strength, then link that to the property.
Key takeaways
Practise this
97 past-paper questions on Polymers, materials, alloys and nanotechnology in the Chemistry HL bank, each with a mark scheme and a worked explanation.