2.6 · SLPaper 1Paper 2

Intermolecular forces

In a minute

Molecules attract each other through , which are far weaker than the inside them. Which forces act depends on a molecule's size and polarity. Their strength explains boiling points, volatility, and why molecular substances don't conduct.

You'll be able to

  • Explain the difference between the covalent bonds inside molecules and the intermolecular forces between them.
  • Deduce which intermolecular forces act between molecules (London, dipole–induced dipole, dipole–dipole, hydrogen bonding) from their structure.
  • Compare the strengths of intermolecular forces, for molecules of similar molar mass and for molecules of different size.
  • Explain the volatility, electrical conductivity and solubility of covalent substances from their structure.
Before you start2 quick questions on what this builds on
Check yourself
When liquid water boils, what happens to its particles?
Check yourself
Which of these molecules is polar?

Revise first: 1.1 The particulate nature of matter, 2.1 The ionic model, 2.2 Covalent bonds and Lewis formulas and 2.4 Bond and molecular polarity

Bonds inside molecules, forces between them

In liquid bromine, a covalent bond joins the two atoms of each BrX2\ce{Br2} molecule. Much weaker attractions between the molecules hold the liquid together.

Even non-polar BrX2\ce{Br2} attracts its neighbours. Its electrons keep moving, so at any instant one end may have more of them: an instantaneous dipole.

That dipole pulls on the electrons of the next molecule and induces a dipole there. The two attract, and a moment later the pattern shifts.

Two panels, each showing two neighbouring non-polar diatomic molecules drawn as ovals with two nuclei. Panel 1, an instantaneous dipole: in the left molecule the electron cloud has drifted to its left end, which is marked delta minus, leaving its right end delta plus. The right molecule's cloud is still even. Panel 2, an induced dipole: the delta plus end of the left molecule pulls the right molecule's electrons towards it, so the right molecule's near end becomes delta minus and its far end delta plus. A double-headed arrow between the delta plus end of the left molecule and the delta minus end of the right molecule is labelled attraction. 1. An instantaneous dipole 2. It induces a dipole δ− δ+ electrons drift to one end electrons still spread evenly δ− δ+ δ− δ+ attraction induced dipole

act between all molecules, polar or not. They get stronger with more electrons (a bigger cloud distorts more easily) and with more surface contact (long chains touch more than compact, branched molecules).

Worked exampleChlorine boils at −34.04 ∘C-34.04\,^{\circ}\text{C}, bromine at 58.78 ∘C58.78\,^{\circ}\text{C} and iodine at 184.4 ∘C184.4\,^{\circ}\text{C} (data booklet, section 8). Explain this trend.

Try it first, then reveal one step at a time.

  1. All three are non-polar, so only London forces act.
Worked examplePentane, CHX3CHX2CHX2CHX2CHX3\ce{CH3CH2CH2CH2CH3}, boils at 36 ∘C36\,^{\circ}\text{C}. Its isomer 2,2-dimethylpropane, C(CHX3)X4\ce{C(CH3)4}, boils at 10 ∘C10\,^{\circ}\text{C}. Explain the difference.

Try it first, then reveal one step at a time.

  1. Both are CX5HX12\ce{C5H12}, so electron count can't be the reason.
Check yourself
Argon (Ar\ce{Ar}), fluorine (FX2\ce{F2}), ethane (CX2HX6\ce{C2H6}) and tetrachloromethane (CClX4\ce{CCl4}) have only London forces. Which has the highest boiling point?
Check yourself
What is overcome when liquid tetrachloromethane boils?

Dipole forces and hydrogen bonds

A has a permanent , from in a shape that doesn't cancel it (2.4). One end carries a δ−\delta-, the other δ+\delta+.

A polar molecule can also induce a dipole in a non-polar one, as water does with dissolved oxygen. That is a dipole–induced dipole force.

Hydrogen bonding is the strongest case. Nitrogen, oxygen and fluorine are very electronegative (3.0, 3.4 and 4.0, against 2.2 for H; data booklet, section 9). A hydrogen bonded to one of them is left strongly δ+\delta+, with no inner electrons to shield its nucleus.

Two water molecules side by side. In the left molecule, oxygen is joined to two hydrogen atoms by solid lines, one of which is labelled covalent bond. That hydrogen atom, marked delta plus, points to the right towards the oxygen atom of the second water molecule, which is marked delta minus and shows its two lone pairs as pairs of dots. A dashed line from the delta plus hydrogen to one lone pair on the second oxygen is labelled hydrogen bond. The oxygen, hydrogen and oxygen atoms along the hydrogen bond lie almost in a straight line. O H H O H H δ+ δ− δ− covalent bond (inside a molecule) hydrogen bond (between molecules)
The solid O−H\ce{O-H} line is a covalent bond; the dashed line is a .

is the umbrella term for London, dipole–induced dipole and , but not hydrogen bonds. In answers, name the specific force: mark schemes can refuse "van der Waals" when they want "London".

To deduce the forces: 1. London forces are always present. 2. If the molecule is polar, add dipole–dipole. 3. If H is bonded directly to N, O or F, add hydrogen bonding.

Worked exampleDeduce the intermolecular forces between molecules of (a) propanone, CHX3COCHX3\ce{CH3COCH3}, and (b) methylamine, CHX3NHX2\ce{CH3NH2}.

Try it first, then reveal one step at a time.

  1. Both have London forces, like every molecule.
Worked exampleHydrogen fluoride, HF\ce{HF}, boils at 20 ∘C20\,^{\circ}\text{C}. Hydrogen chloride, HCl\ce{HCl}, has more electrons but boils at −85 ∘C-85\,^{\circ}\text{C}. Explain why.

Try it first, then reveal one step at a time.

  1. HCl\ce{HCl} (18 electrons) beats HF\ce{HF} (10) on London forces, so something else must win.
Check yourself
Which forms hydrogen bonds between its own molecules: hydrazine HX2N−NHX2\ce{H2N-NH2}, hydrogen sulfide HX2S\ce{H2S}, methoxymethane CHX3OCHX3\ce{CH3OCH3} or trifluoromethane CHFX3\ce{CHF3}?
Check yourself
Which forces act between molecules of trichloromethane, CHClX3\ce{CHCl3}?

Strength, volatility, conductivity and solubility

A temperature axis from minus 60 to plus 100 degrees Celsius with three molecules of similar molar mass marked on it by their boiling points. Propane, which has only London forces, boils at minus 42 degrees Celsius. Ethanal, which has London and dipole-dipole forces, boils at 20 degrees Celsius. Ethanol, which has London forces, dipole-dipole forces and hydrogen bonding, boils at 78 degrees Celsius. −60−40−200 20406080100 boiling point / °C propane, −42 °C London only ethanal, 20 °C London + dipole–dipole ethanol, 78 °C London + dipole–dipole + hydrogen bonding
Propane, ethanal and ethanol have molar masses of about 44−46 g mol−1\pu{44-46 g mol-1}.

A volatile substance evaporates easily: the weaker its intermolecular forces, the lower its boiling point and the more volatile it is. Of the three above, propane is the most volatile.

The condition matters. Iodine has only London forces, yet with 106 electrons it boils at 184.4 ∘C184.4\,^{\circ}\text{C}, far above water.

such as diamond (2.5) are different: melting them breaks covalent bonds, so they are not volatile.

Worked exampleEthanol, CHX3CHX2OH\ce{CH3CH2OH}, and methoxymethane, CHX3OCHX3\ce{CH3OCH3}, both have M=46.08 g mol−1M = \pu{46.08 g mol-1}. Ethanol boils at 78 ∘C78\,^{\circ}\text{C} and methoxymethane at −24 ∘C-24\,^{\circ}\text{C}. Explain the difference.

Try it first, then reveal one step at a time.

  1. Isomers: same electrons, similar London forces. Both are polar.

needs mobile charged particles. Molecular substances have no ions, and no electrons free to move from molecule to molecule. Partial charges are fixed on neutral molecules, so they don't conduct. A few react with water to form ions.

Worked exampleLiquid hydrogen bromide does not conduct, but its solution in water does. Write an equation, with state symbols, for the reaction of gaseous HBr\ce{HBr} with water that explains this.

Try it first, then reveal one step at a time.

  1. HBr\ce{HBr} gives its H to a water molecule, forming two ions.

For , like dissolves like. Small molecules with O−H\ce{O-H} or N−H\ce{N-H}, or a lone pair on N or O, hydrogen bond to water and dissolve. Non-polar molecules can't replace water's hydrogen bonds, so they dissolve in a non-polar such as hexane instead.

Check yourself
Butane, propanone and propan-1-ol (CHX3CHX2CHX2OH\ce{CH3CH2CH2OH}) have molar masses of about 58−60 g mol−1\pu{58-60 g mol-1}. Which is least volatile?
Check yourself
Which substance is most soluble in water?

Common mistakes

  • Saying boiling breaks covalent bonds. Only the forces between molecules are overcome.
  • Giving hydrogen bonding to any molecule with H. The H must be on N, O or F: ethanal, CHX3CHO\ce{CH3CHO}, has none.
  • Writing "van der Waals" when the question wants the specific force, such as London (dispersion).
  • Ranking by type of force without checking molar mass. The order only holds for molecules of similar size.

Exam tips

  • "Deduce" the forces: list every one, London first, and link each to the structure (polar bonds and shape; H on N, O or F).
  • "Explain" a boiling-point difference: name the forces in each substance, say which are stronger and why, then that more energy is needed to overcome them.
  • "Compare and contrast" needs a similarity and a difference, such as similar London forces but hydrogen bonding in only one.

Key takeaways

Learn thisBoiling a molecular substance overcomes intermolecular forces; covalent bonds don't break.
Learn thisLondon forces act between all molecules, and grow with electron number and surface contact.
Learn thisDipole–dipole forces need polar molecules. Hydrogen bonding needs H on N, O or F, and a lone pair on N, O or F nearby.
Learn thisAt comparable molar mass: London < dipole–dipole < hydrogen bonding.
Learn thisVan der Waals = London + dipole–induced dipole + dipole–dipole (not hydrogen bonds).
Learn thisStronger forces: higher boiling point, less volatile. Pure molecular substances don't conduct; like dissolves like.

Practise this

83 past-paper questions on Intermolecular forces and solids in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Intermolecular forces and solids →