The metallic model
In a minute
A metal is a lattice of positive ions held together by a shared sea of . The pull between them is the . This one picture explains why metals conduct, why they bend instead of shattering, and why some melt far higher than others.
You'll be able to
- Describe the in terms of cations and delocalized electrons.
- Explain why metals conduct electricity and heat and why they are malleable, and link these properties to their uses.
- Explain how the charge and radius of the metal ion change the strength of metallic bonding.
- Explain melting-point trends down a group and across a period for s-block and p-block metals.
- Explain why a has a high melting point and conducts electricity, using its delocalized d electrons.
Before you start3 quick questions on what this builds on
Revise first: 1.4 Sublevels, orbitals and electron configurations, 2.1 The ionic model and 2.5 Covalent network structures
What holds a metal together
Metal atoms hold their outer electrons loosely. In a solid metal, each atom lets them go, and they spread through the whole piece of metal.
What is left of each atom is a positive ion, a . The cations pack in a regular, repeating pattern called a lattice. The freed electrons move through the spaces between them: a sea of .
Each cation attracts the electrons on every side. So a has no fixed direction, unlike a covalent bond between two particular atoms: it is non-directional.
A cation's charge equals the number of electrons its atom gave to the sea: sodium gives one (), aluminium three ().
Try it first, then reveal one step at a time.
- Both outer electrons join the sea, leaving a 2+ cation.
- Check the charge: on the left, on the right.
Try it first, then reveal one step at a time.
- Structure: what the particles are and how they are arranged.
- Bonding: name the attraction and what it acts between.
- Solid sodium is a lattice of sodium cations, , in a regular arrangement. Each atom has given its outer electron to a sea of delocalized electrons that spreads through the lattice. The metallic bond is the electrostatic attraction between the cations and this sea of electrons. It acts in all directions, so it is non-directional.
Conductivity, malleability and uses
Connect a metal to a cell and its drift towards the positive terminal. Electrons enter at one end and leave at the other: an electric current. The cations stay put. This works in the solid and the liquid.
Metals conduct heat well too. The fast-moving electrons carry kinetic energy quickly from hot to cold, and the closely packed cations pass vibrations along.
Metals are malleable (they can be hammered into shape) and ductile (drawn into wires). A force makes layers of cations slide over each other. The electron sea moves with them, so each cation is still attracted to electrons in its new position.
Because the bonding is non-directional, no bond breaks as the shape changes. In an ionic lattice, sliding a layer puts ions of the same charge side by side. They repel, and the crystal shatters.
Uses follow from these properties. Copper is ductile and conducts electricity, so it makes wires. Aluminium conducts heat, so it makes saucepans. Gold is so malleable it can be beaten into leaf. Mixing in other atoms makes an , which you meet in 2.11.
Try it first, then reveal one step at a time.
- Name the mobile charged particles, then say what they do in a potential difference.
- Copper contains delocalized electrons that are not held by any one atom. When a potential difference is applied, these electrons move through the lattice towards the positive terminal, which is an electric current. The copper cations stay in fixed positions.
Try it first, then reveal one step at a time.
- Tin: what moves, and why the bonding survives.
- Potassium bromide: what lines up when a layer moves, and what that causes.
- In tin, layers of cations slide over each other when a force is applied. The delocalized electrons move with them, so the cations are still attracted to the electrons in their new positions. Metallic bonding is non-directional, so the metal changes shape without breaking. In potassium bromide, moving a layer brings ions of the same charge next to each other. These ions repel, so the crystal shatters.
What makes metallic bonding stronger
Melting a metal means giving the cations enough energy to move past each other. The stronger the , the more energy this takes, so the higher the melting point.
Two things about the cation decide the strength. Charge: a 3+ ion gives three electrons to the sea, so the sea is denser and more strongly attracted. Size: around a smaller ion the electrons get closer to its centre, and the ions pack more tightly.
Down group 1 every ion is 1+, but the grows: , , , in (data booklet, section 10). The bonding weakens and melting points fall.
Across period 3 the charge rises from to to , and the radius falls from to to . Both strengthen the bonding, so melting points rise.
Liquid metals still have metallic bonding; boiling separates the atoms completely. So boiling points show the trend even more clearly: , and across period 3.
The model compares bond strength, not every melting point. How the ions pack matters too, so group 2 is irregular: magnesium () melts below calcium (). For bond strength, use charge and radius.
Try it first, then reveal one step at a time.
- Same group, so the same charge; rubidium is lower down, so its ion is larger.
- The booklet agrees: rubidium melts at , sodium at .
- Rubidium has the lower melting point. Both metals form 1+ ions, so each atom gives one electron to the sea. The rubidium ion is larger, so the delocalized electrons are further from the centre of each cation and the electrostatic attraction is weaker. Less energy is needed to overcome it.
Try it first, then reveal one step at a time.
- Charge: against . Radius (section 10): against .
- Turn both into a statement about attraction, then energy, naming both metals.
- Calcium forms 2+ ions but potassium forms 1+ ions, so calcium has a denser sea of delocalized electrons. The calcium ion is also smaller than the potassium ion. The higher charge and smaller radius give a stronger electrostatic attraction between the cations and the electrons in calcium. More energy is needed to overcome it, so calcium has the higher melting point.
Transition elements HL only
Iron melts at , far above calcium in the same period. The metallic model explains why, once you count which electrons join the sea.
A has a partly filled d in its atom or in a common ion. From scandium to copper, the 3d and 4s sublevels are very close in energy. So in the solid, the 4s electrons and some 3d electrons are delocalized.
Size helps too. The of iron is , against for calcium, in (section 10).
Across the d-block, melting points do not climb steadily as from sodium to aluminium. Each extra electron goes into the inner 3d sublevel, so the number of electrons in the sea does not simply rise by one each time. From scandium to nickel, every melting point lies between and .
Try it first, then reveal one step at a time.
- Say which electrons are delocalized, then what they do in a potential difference.
- In titanium the 3d and 4s sublevels are close in energy, so electrons from both are delocalized through the lattice. When a potential difference is applied, these electrons move through the metal, carrying the current.
Try it first, then reveal one step at a time.
- Electrons: iron, , delocalizes some 3d electrons; calcium, , has only two 4s electrons.
- Size: iron atoms are smaller. Link both to attraction and energy.
- Iron is a transition element, so its 4s electrons and some of its 3d electrons are delocalized. Each iron atom gives more electrons to the sea than a calcium atom, which has only its two 4s electrons. Iron atoms are also smaller. So the electron density is higher and the electrostatic attraction between the cations and the electrons is stronger in iron. More energy is needed to overcome it.
Common mistakes
- Saying the lattice is nuclei or atoms. It is cations surrounded by delocalized electrons.
- Calling a metal ionic, or the electron sea anions. A pure metal has no negative ions.
- Explaining malleability by "electrons free to move" or "weak bonds". Say the layers of cations slide and the bonding still holds.
- Getting the radius effect backwards. A larger cation gives weaker bonding, so melting points fall down a group.
Exam tips
- "Describe" a metal's structure and bonding in two parts: a lattice of cations in a sea of delocalized electrons, and the electrostatic attraction between them.
- "Explain" a melting-point comparison with comparative words for both metals: higher charge, smaller ion, stronger attraction, more energy needed. "Stronger bonds" alone earns nothing.
- In a Paper 1A ordering question, rank by cation charge first, then by size.
Key takeaways
Practise this
81 past-paper questions on Ionic, covalent and metallic bonding in the Chemistry HL bank, each with a mark scheme and a worked explanation.