The pH scale and Kw
In a minute
tells you how acidic a solution is: , so each step of 1 in pH is a factor of 10 in . In any aqueous solution, and are tied together by the , . Comparing the two tells you whether a solution is acidic, neutral or basic.
You'll be able to
- Calculate pH from and from pH, and explain why one pH unit is a tenfold change.
- Estimate pH with universal indicator, measure it precisely with a pH meter, and choose between them.
- Use to find one ion concentration from the other, including the pH of a strong base.
- Classify solutions as acidic, neutral or basic, and explain why increases with temperature.
Before you start3 quick questions on what this builds on
Revise first: 1.6 The mole and molar mass, 1.8 Concentration and Avogadro's law, 5.8 Dynamic equilibrium and the equilibrium constant, 5.9 Le Châtelier's principle and 6.1 Brønsted–Lowry acids and bases
The pH scale
Acids give hydrogen ions, , which in water exist as ; and mean the same. Square brackets mean concentration in .
usually runs from about down to . Such numbers are hard to compare, so chemists use a logarithmic scale.
This equation is in the data booklet (section 1). To go back from pH to concentration, undo the log: .
A with one acidic hydrogen, such as or , ionizes completely (6.3). So its equals the acid's concentration.
Try it first, then reveal one step at a time.
- ionizes completely, so .
- Substitute:
- Give pH to 2 decimal places, with no unit.
Try it first, then reveal one step at a time.
- Undo the log: .
- Write it in standard form to 3 s.f., with units.
The minus sign means a higher gives a lower pH. The log means each fall of 1 in pH is a tenfold rise in .
So a sketch of pH against is a falling curve, not a straight line, reaching pH 0 at . Against , pH is a straight line of gradient .
Measuring pH
Universal indicator is a mixture of indicators whose colour changes gradually across the whole pH range. The colour gives an estimate of pH.
It runs from red in strong acid, through orange and yellow, to green near pH 7, then blue and purple in strong alkali. You match the colour by eye, so the result is good only to about the nearest whole pH unit.
A pH meter, or a pH probe on a data logger, has an electrode that responds to . It gives a digital reading, usually to 2 decimal places.
Calibrate it first in buffer solutions of known pH, such as 4.00 and 7.00. Rinse the electrode with distilled water between solutions.
A probe suits precise work, coloured or cloudy samples and continuous logging, as in a titration. Indicator is cheap, quick and needs no calibration, so it suits a rough check.
Try it first, then reveal one step at a time.
- Precise means a calibrated digital reading.
- Include calibration, rinsing, a steady reading and the precision recorded.
- Calibrate the probe with buffer solutions of known pH. Rinse the electrode with distilled water. Place it in the pond water sample and wait until the reading is steady. Record the pH to 2 decimal places.
Try it first, then reveal one step at a time.
- The samples are strongly coloured.
- Their pH values differ by less than one unit.
- The juice is strongly coloured, so it would hide the indicator's colour. Universal indicator only gives an estimate, to about the nearest whole pH unit, so both juices would look much the same. A calibrated pH meter reads to 2 decimal places, so it can show the difference.
Kw: acidic, neutral and basic
Pure water conducts electricity very slightly, so it holds a few ions. Water is (6.1), and a tiny fraction of molecules pass a proton to each other.
, often written . Water is the solvent and its concentration hardly changes, so it is left out of the .
The equation is in section 1 of the data booklet, the value at 298 K in section 2. It holds in every aqueous solution.
The product is fixed, so the two concentrations are inversely related. If rises 100 times, falls 100 times. Neither ever reaches zero.
A with one hydroxide ion, such as , dissociates completely, so equals its concentration. To find its pH, get from first.
Try it first, then reveal one step at a time.
- dissociates completely, so .
- Use the unrounded .
Try it first, then reveal one step at a time.
- , so the solution is basic.
Kw and temperature
The ionization of water is the reverse of neutralization, , which is exothermic. So the ionization of water is endothermic.
Raising the temperature favours the endothermic direction (5.9). More water ionizes, so increases. Like any equilibrium constant, changes only with temperature.
Pure water always has , so . Above 298 K, is larger and the pH is below 7, yet the water is still neutral.
Try it first, then reveal one step at a time.
- In pure water , so .
Try it first, then reveal one step at a time.
- Link the sign of to the direction the equilibrium shifts.
- Neutral is defined by comparing with , not by the number 7.
- The ionization of water, , is endothermic. Increasing the temperature shifts the equilibrium to the right, so more water ionizes and increases. Each molecule that ionizes gives one and one , so the concentrations stay equal and the water is neutral. pH 7 means neutral only at 298 K.
Common mistakes
- Dropping the minus sign in , which gives a negative pH for a dilute acid.
- Giving pH units. pH is a pure number.
- Rounding before taking the log. Round only the final pH.
- Quoting a universal indicator result to 2 decimal places, or using an uncalibrated pH meter.
Exam tips
- "Calculate" pH: show the substitution, , then the answer to 2 decimal places, no unit.
- For a base, show before the pH.
- "Deduce" acidic, neutral or basic by comparing with ; compare pH with 7 only at 298 K.
- "Suggest" a way to measure pH: name the method and the expected result; for a meter, mention calibration.
Key takeaways
Practise this
103 past-paper questions on pH, strong and weak acids and bases, Ka and Kb in the Chemistry HL bank, each with a mark scheme and a worked explanation.