6.5 · AHL · HL onlyPaper 1Paper 2

Salt solutions and pH curves

In a minute

A salt of a and a gives a neutral solution. An ion from a weak parent reacts with water (), so ammonium salts are acidic and carboxylates and carbonates are basic. The same idea shapes curves: a weak partner moves the equivalence pH away from 7 and adds a , where the pH at half-equivalence equals the .

You'll be able to

  • Predict whether a salt solution is acidic, neutral or basic from the strengths of its parent acid and base.
  • Write equations for the reactions of NHX4X+\ce{NH4^+}, carboxylate, COX3X2−\ce{CO3^2-} and HCOX3X−\ce{HCO3^-} ions with water.
  • Explain the start, and buffer region of each pH curve, whether the acid and the base are strong or weak.
  • Read pKa\mathrm{p}K_\mathrm{a} or pKb\mathrm{p}K_\mathrm{b} from the half-equivalence point of a pH curve.
Before you start3 quick questions on what this builds on
Check yourself
Hydrofluoric acid has Ka=6.8×10−4K_\mathrm{a} = 6.8 \times 10^{-4} at 298 K. What is KbK_\mathrm{b} of the fluoride ion?
Check yourself
Hydrochloric acid and ethanoic acid are both 0.10 mol dm−3\pu{0.10 mol dm-3}. Which statement is correct?
Check yourself
In a , what volume, in cm3\pu{cm3}, of 0.200 mol dm−3\pu{0.200 mol dm-3} sodium hydroxide reacts exactly with 15.0 cm3\pu{15.0 cm3} of 0.120 mol dm−3\pu{0.120 mol dm-3} nitric acid? Give 3 significant figures.

Revise first: 1.8 Concentration and Avogadro's law, 2.1 The ionic model, 2.12 Polymers, 5.8 Dynamic equilibrium and the equilibrium constant, 6.2 The pH scale and Kw, 6.3 Strong and weak acids, neutralization and pH curves and 6.4 pOH, Ka and Kb

Salt solutions

In 6.3 you made salts by . At 298 K a sodium chloride solution has pH 7. But 0.10 mol dm−3\pu{0.10 mol dm-3} ammonium chloride has a pH of about 5, and sodium ethanoate about 9.

A salt's anion comes from its parent acid, and its cation from its parent base. Ethanoate, CHX3COOX−\ce{CH3COO^-}, is the conjugate base of ethanoic acid. Ammonium, NHX4X+\ce{NH4^+}, is the conjugate acid of ammonia.

Since Ka×Kb=KwK_\mathrm{a} \times K_\mathrm{b} = K_\mathrm{w} for a , the weaker the parent, the stronger its conjugate. Ions from strong parents, such as ClX−\ce{Cl^-}, NOX3X−\ce{NO3^-}, NaX+\ce{Na^+} and KX+\ce{K^+}, don't react with water at all. An anion that still has an acidic hydrogen is the exception: HSOX4X−\ce{HSO4^-} comes from a strong acid but is itself a weak acid, so sodium hydrogensulfate solution is acidic.

Write each reaction with the ⇌\ce{<=>} arrow, as only a few ions react. An acidic ion gives water a proton and makes HX3OX+\ce{H3O^+}: NHX4X+(aq)+HX2O(l)⇌NHX3(aq)+HX3OX+(aq)\ce{NH4^+(aq) + H2O(l) <=> NH3(aq) + H3O^+(aq)}.

A basic ion takes a proton from water and leaves OHX−\ce{OH^-}. A carboxylate, with R an alkyl group: RCOOX−(aq)+HX2O(l)⇌RCOOH(aq)+OHX−(aq)\ce{RCOO^-(aq) + H2O(l) <=> RCOOH(aq) + OH^-(aq)}. Carbonate: COX3X2−(aq)+HX2O(l)⇌HCOX3X−(aq)+OHX−(aq)\ce{CO3^2-(aq) + H2O(l) <=> HCO3^-(aq) + OH^-(aq)}.

Hydrogencarbonate is : HCOX3X−(aq)+HX2O(l)⇌HX2COX3(aq)+OHX−(aq)\ce{HCO3^-(aq) + H2O(l) <=> H2CO3(aq) + OH^-(aq)} or HCOX3X−(aq)+HX2O(l)⇌COX3X2−(aq)+HX3OX+(aq)\ce{HCO3^-(aq) + H2O(l) <=> CO3^2-(aq) + H3O^+(aq)}. Its KbK_\mathrm{b} (about 2×10−82 \times 10^{-8}) beats its KaK_\mathrm{a} (about 5×10−115 \times 10^{-11}), so its solutions are weakly basic.

Worked exampleExplain why a solution of ammonium bromide, NHX4Br\ce{NH4Br}, has a pH below 7.

Try it first, then reveal one step at a time.

  1. Name the parents: hydrobromic acid is strong, ammonia is weak.
Worked exampleA solution of sodium propanoate, CHX3CHX2COONa\ce{CH3CH2COONa}, is basic. Write an equation for the reaction of the propanoate ion with water.

Try it first, then reveal one step at a time.

  1. NaX+\ce{Na^+} comes from a strong base, so leave it out.
Check yourself
Which equation shows why a solution of sodium carbonate is basic?
Check yourself
Hydrofluoric acid has Ka=6.8×10−4K_\mathrm{a} = 6.8 \times 10^{-4} and ammonia has Kb=1.8×10−5K_\mathrm{b} = 1.8 \times 10^{-5}. What is a solution of ammonium fluoride like?

A weak acid with a strong base

In 6.3 you met the curve for a strong acid with a strong base. Now titrate a weak acid with sodium hydroxide.

pH curve for adding 0.100 mol per cubic decimetre sodium hydroxide to 20.0 cubic centimetres of a 0.100 mol per cubic decimetre weak acid with pKa 4.20. The curve starts at pH 2.6, rises quickly at first, then climbs slowly through a flatter buffer region. At the half-equivalence point, 10.0 cubic centimetres, the pH is 4.20, equal to the pKa. The curve then rises steeply from about pH 7 to about pH 10.5 around the equivalence point at 20.0 cubic centimetres, where the pH is 8.45, above 7. After that it levels off near pH 12.5 as sodium hydroxide is in excess. 0 10 20 30 40 0 2 4 6 8 10 12 14 volume of NaOH(aq) added / cm³ pH start: pH 2.6 buffer region half-equivalence, 10.0 cm³: pH = pKa = 4.20 equivalence point 20.0 cm³, pH 8.45 excess NaOH pH 7
A weak acid (pKa=4.20\mathrm{p}K_\mathrm{a} = 4.20) titrated with sodium hydroxide, both 0.100 mol dm−3\pu{0.100 mol dm-3}.

1. Start: pH 2.6, not 1.0, because the weak acid is only partly ionized.

2. Buffer region: the base turns HA\ce{HA} into AX−\ce{A^-}, and the mixture resists pH change. It is a (6.7).

3. Equivalence point: the same volume as for a strong acid, but the pH is above 7, because AX−\ce{A^-} reacts with water to make OHX−\ce{OH^-}.

4. The steep section is shorter, about pH 7 to 10.5. Afterwards the curve levels off, as the base is in excess.

Collecting your own data? Add the titrant in small portions near the equivalence point, where the pH changes fastest, or you miss the steep section.

Worked exampleA weak monoprotic acid is titrated with sodium hydroxide. The equivalence point is at 23.6 cm3\pu{23.6 cm3}, and the pH after 11.8 cm3\pu{11.8 cm3} is 3.86. Determine the , KaK_\mathrm{a}.

Try it first, then reveal one step at a time.

  1. 23.62=11.8 cm3\frac{23.6}{2} = \pu{11.8 cm3}, so this reading is at half-equivalence.
Worked exampleMethanoic acid is titrated with potassium hydroxide. Explain why the pH at the equivalence point is above 7.

Try it first, then reveal one step at a time.

  1. At equivalence the flask holds potassium methanoate, with nothing in excess.
Check yourself
A weak acid titration has its equivalence point at 27.4 cm3\pu{27.4 cm3}. At what volume of base, in cm3\pu{cm3}, do you read the pH to find pKa\mathrm{p}K_\mathrm{a}? Give 1 decimal place.
Check yourself
Propanoic acid has Ka=1.3×10−5K_\mathrm{a} = 1.3 \times 10^{-5}. What is the pH at the half-equivalence point of its titration with sodium hydroxide? Give 2 decimal places.

The four combinations

Make each partner strong or weak and you get four curves. Here base is always added to acid.

Four small pH curves, each for adding 0.100 mol per cubic decimetre base to 20.0 cubic centimetres of 0.100 mol per cubic decimetre acid, pH 0 to 14 against volume 0 to 40 cubic centimetres. strong acid + strong base, HCl + NaOH: starts at pH 1.0, equivalence point at 20 cubic centimetres with pH 7.00. weak acid + strong base, CH3COOH + NaOH: starts at pH 2.9, equivalence point at 20 cubic centimetres with pH 8.73. strong acid + weak base, HCl + NH3: starts at pH 1.0, equivalence point at 20 cubic centimetres with pH 5.28. weak acid + weak base, CH3COOH + NH3: starts at pH 2.9, equivalence point at 20 cubic centimetres with pH 7.00. The strong acid with strong base curve has the longest vertical section, from about pH 3 to 11. Weak acid with strong base has a flatter buffer region before a shorter vertical section from about pH 7 to 11. Strong acid with weak base has a short vertical section from about pH 3 to 7 and levels off near pH 9. Weak acid with weak base has no vertical section at all, only a gradual change through pH 7. 0 20 40 0 7 14 strong acid + strong base HCl + NaOH pH 7.00 0 20 40 0 7 14 weak acid + strong base CH₃COOH + NaOH pH 8.73 0 20 40 0 7 14 strong acid + weak base HCl + NH₃ pH 5.28 0 20 40 0 7 14 weak acid + weak base CH₃COOH + NH₃ pH 7.00 volume of base added / cm³ (pH on each vertical axis, 0 to 14; dotted line at pH 7)
Base added to the same amount of acid each time, so every equivalence point is at 20.0 cm3\pu{20.0 cm3}.

Each equivalence pH matches the salt formed there: neutral for strong + strong, basic for weak acid + strong base, acidic for strong acid + weak base.

With a weak base, the steep section sits below pH 7, and the curve then levels off near pH 9, as the excess base is weak. With both partners weak there is no steep section, so the equivalence point is hard to see. Its pH depends on KaK_\mathrm{a} against KbK_\mathrm{b}, as for the salt.

Acid can also be added to a weak base such as ammonia. At half-equivalence [NHX3]=[NHX4X+][\ce{NH3}] = [\ce{NH4^+}], which cancel in the expression.

pH curve for adding 0.100 mol per cubic decimetre hydrochloric acid to 20.0 cubic centimetres of 0.100 mol per cubic decimetre aqueous ammonia, pKb 4.75. The curve starts at pH 11.1 and falls. It falls slowly through a flatter buffer region. At the half-equivalence point, 10.0 cubic centimetres, the pH is 9.25, so the pOH is 4.75, equal to the pKb. The curve then drops steeply from about pH 7 to about pH 3.5 around the equivalence point at 20.0 cubic centimetres, where the pH is 5.28, below 7. After that it levels off near pH 1.5 as hydrochloric acid is in excess. 0 10 20 30 40 0 2 4 6 8 10 12 14 volume of HCl(aq) added / cm³ pH start: pH 11.1 buffer region half-equivalence, 10.0 cm³: pH 9.25, so pOH = pKb = 4.75 equivalence point 20.0 cm³, pH 5.28 excess HCl pH 7
Ammonia titrated with hydrochloric acid. At half-equivalence, =14.00−9.25=4.75=pKb= 14.00 - 9.25 = 4.75 = \mathrm{p}K_\mathrm{b}.
Worked exampleHydrochloric acid is added to aqueous methylamine, CHX3NHX2\ce{CH3NH2}, at 298 K. The equivalence point is at 16.4 cm3\pu{16.4 cm3}, and the pH after 8.2 cm3\pu{8.2 cm3} is 10.64. Determine pKb\mathrm{p}K_\mathrm{b} of methylamine.

Try it first, then reveal one step at a time.

  1. 16.42=8.2 cm3\frac{16.4}{2} = \pu{8.2 cm3}: half-equivalence, where pOH=pKb\mathrm{pOH} = \mathrm{p}K_\mathrm{b}.
Worked exampleSodium hydroxide is added to equal volumes of 0.100 mol dm−3\pu{0.100 mol dm-3} hydrochloric acid and 0.100 mol dm−3\pu{0.100 mol dm-3} propanoic acid. Compare and contrast the two pH curves.

Try it first, then reveal one step at a time.

  1. Same: what depends only on the amount of acid?
Check yourself
A pH curve starts at pH 11, falls slowly, then drops steeply to an equivalence point at pH 5.5. Which titration gave it?
Check yourself
Equal amounts of hydrochloric acid and ethanoic acid are each titrated with the same sodium hydroxide. What is the same for both curves?

Common mistakes

  • Calling every salt solution neutral. Only a salt of a strong acid and a strong base is reliably neutral; check the parent of each ion.
  • Writing an equation for NaX+\ce{Na^+} or ClX−\ce{Cl^-} with water. Ions from strong parents don't react with water.
  • Giving a basic ion such as COX3X2−\ce{CO3^2-} the product HX3OX+\ce{H3O^+}. A basic ion takes a proton from water, leaving OHX−\ce{OH^-}.
  • Reading pKa\mathrm{p}K_\mathrm{a} at the equivalence point. It is the pH at half the equivalence volume.
  • Blaming a basic equivalence point on "excess base". At equivalence nothing is in excess: the conjugate base of the weak acid reacts with water.

Exam tips

  • "Sketch" a pH curve: label both axes, start at a sensible pH, put the equivalence point at the right volume and on the right side of pH 7, show any buffer region, and level the curve off afterwards.
  • "Write an equation" for a salt ion: ion + water, the ⇌\ce{<=>} arrow, and HX3OX+\ce{H3O^+} for an acidic ion or OHX−\ce{OH^-} for a basic one.
  • "Determine" pKa\mathrm{p}K_\mathrm{a} from a curve: read the equivalence volume, halve it, and read the pH there. Write the half volume down.

Key takeaways

Learn thisSalts: strong acid + strong base, neutral; strong acid + weak base, acidic; weak acid + strong base, basic; weak + weak, compare KaK_\mathrm{a} with KbK_\mathrm{b}.
Learn thisNHX4X+\ce{NH4^+} makes HX3OX+\ce{H3O^+}; RCOOX−\ce{RCOO^-}, COX3X2−\ce{CO3^2-} and HCOX3X−\ce{HCO3^-} make OHX−\ce{OH^-} (use ⇌\ce{<=>}).
Learn thisweak acid + strong base, at half-equivalence: pH=pKa\text{weak acid + strong base, at half-equivalence: } \mathrm{pH} = \mathrm{p}K_\mathrm{a}
Learn thisweak base + strong acid, at half-equivalence: pOH=pKb\text{weak base + strong acid, at half-equivalence: } \mathrm{pOH} = \mathrm{p}K_\mathrm{b}
Learn thisCompared with a strong acid of the same concentration and volume, a weak acid curve starts higher, has a buffer region, an equivalence pH above 7 and a shorter steep section, at the same equivalence volume.

Practise this

57 past-paper questions on Buffers and salt hydrolysis in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Buffers and salt hydrolysis →