Ionization energy trends and transition elements
In a minute
The dips in first across a period show that each main energy level is split into . In the the 3d sublevel is only partly filled. That gives them , coloured compounds, catalytic and magnetic properties, high melting points and .
You'll be able to
- Explain how the dips in first ionization energy across a period are evidence for sublevels, using the energy of the electron removed.
- Recognize the characteristic properties of transition elements and link them to the incomplete d sublevel.
- Describe a complex ion using and , and find its charge or the metal's ; argue for and against counting scandium and zinc.
- Write the of a period 4 transition-metal , removing 4s before 3d.
- Explain variable oxidation states using successive ionization energies that rise without a large jump.
Before you start3 quick questions on what this builds on
Revise first: 1.4 Sublevels, orbitals and electron configurations, 1.5 Ionization energy, 2.2 Covalent bonds and Lewis formulas, 2.10 The metallic model, 3.1 The periodic table and periodicity and 3.3 Oxidation states
Dips in first ionization energy: evidence for sublevels
Across a period the nuclear charge rises by one each time, while the outer electrons stay in the same main energy level with similar . So the first ionization energy generally rises.
If every electron in a main energy level had the same energy, the rise would be smooth. Instead period 2 has two dips, at boron and at oxygen (data booklet, section 9).
To explain a dip, look at **which electron is removed**. The higher its energy, the less energy is needed to remove it.
**Beryllium to boron.** Beryllium loses a 2s electron, but boron loses a 2p electron. The 2p is higher in energy than 2s, and the 2p electron is partly shielded by the 2s pair. So boron's electron needs less energy to remove: against .
**Nitrogen to oxygen.** In nitrogen each 2p electron is alone in its , as predicts. In oxygen the fourth 2p electron must share an orbital. Repulsion between the paired electrons raises their energy, so one is removed more easily: against .
Try it first, then reveal one step at a time.
- Say which electron each atom loses: beryllium loses a 2s electron; boron loses a 2p electron.
- Compare the energies of those two electrons, then say what the drop tells you about level 2.
- Beryllium loses an electron from the 2s sublevel, but boron loses an electron from the 2p sublevel. The 2p electron is higher in energy than a 2s electron and is partly shielded by the 2s electrons. So less energy is needed to remove it, even though boron has a greater nuclear charge. If all electrons in the second energy level had the same energy, boron's value would be higher. So the second energy level must be split into sublevels of different energy.
Try it first, then reveal one step at a time.
- Draw the 2p boxes: nitrogen , oxygen .
- Say which electron oxygen loses and why its energy is higher.
- In nitrogen each of the three 2p electrons occupies a separate orbital. In oxygen the electron removed comes from a 2p orbital that holds a pair of electrons. Repulsion between the two electrons in that orbital raises the energy of the electron removed. So less energy is needed to remove it, which outweighs oxygen's extra proton.
Transition elements and their properties
A has an incomplete d sublevel in its atom or in one of its common . In period 4 this covers scandium to copper, although scandium is a borderline case (see below).
1. **Variable oxidation states.** Iron forms and ; the next section explains why.
2. **High melting points.** Both the 4s and 3d electrons can be delocalized, so the metallic bonding is strong (see 2.10).
3. **Magnetic properties.** Unpaired d electrons make many transition-element compounds attracted into a magnetic field. Iron, cobalt and nickel metals are strongly magnetic. You don't need to name the types of magnetism.
4. **Catalytic properties.** Iron catalyses the Haber process, nickel the hydrogenation of alkenes and manganese(IV) oxide the decomposition of hydrogen peroxide. Variable oxidation states let a catalyst pass electrons to and from reactants.
5. **Coloured compounds.** Hydrated copper(II) sulfate is blue and aqueous nickel(II) chloride green; 3.5 explains why.
6. **Complex ions.** A transition-element ion can accept lone pairs from several molecules or ions at once.
Common are , , , and . Each has at least one lone pair. In a the ligands are written inside square brackets with the overall charge outside, as in .
The charge of a complex is the charge of the metal ion plus the charges of the ligands. Neutral ligands such as and add nothing.
Try it first, then reveal one step at a time.
- Let the oxidation state of chromium be . Water ligands are neutral; each chloride ligand is .
- The charges add up to the overall charge: .
- So .
Zinc sits in the d-block but is not a transition element. Scandium is a borderline case: its atom, , has an incomplete d sublevel, so it meets the definition. Against that, its only ion, , has no d electrons at all. So scandium has one oxidation state and colourless compounds, and lacks most of the characteristic properties.
Try it first, then reveal one step at a time.
- Write the atom and its only ion: is and is .
- Compare both with the definition.
- A zinc atom is , so its 3d sublevel is full. Zinc forms only one ion, , which is , so the 3d sublevel is still full. A transition element must have an incomplete d sublevel in its atom or in one of its ions. So zinc is not a transition element.
Ions of transition elements and variable oxidation states
In a neutral atom 4s fills before 3d. But once the atom is ionized, the 4s electrons are the outermost and highest in energy, so **4s electrons are removed before 3d electrons**.
So most period 4 transition elements form a ion by losing both 4s electrons.
Try it first, then reveal one step at a time.
- Write the atom first: 23 electrons give .
- Remove 3 electrons: both 4s electrons go first, then one 3d electron.
- Check: .
Chromium and copper keep their atom exceptions: is and is . The 4s electron still leaves first.
Why can transition elements lose different numbers of electrons? Compare the of calcium and manganese.
Calcium's third electron would come from the full 3p sublevel of a lower main energy level, so the energy jumps. Calcium only ever forms .
In manganese the 4s and 3d sublevels are close in energy. Its successive ionization energies rise gradually across all seven 4s and 3d electrons, with no large jump. The energy for each extra electron can be repaid by stronger bonding in the compound.
So a is characteristic of transition elements. Manganese shows in , in and in , the highest, using all seven 4s and 3d electrons.
Try it first, then reveal one step at a time.
- Calcium: where does the third electron come from, and what happens to the ionization energy?
- Manganese: how do the energies of the 4s and 3d electrons compare, and what does the graph look like?
- In calcium the first two electrons are removed from the 4s sublevel. The third electron would come from the full 3p sublevel, which is closer to the nucleus and less shielded, so there is a very large jump in ionization energy. In manganese the 4s and 3d sublevels are close in energy. So its successive ionization energies increase gradually, with no large jump, across all seven 4s and 3d electrons. Different numbers of electrons can therefore be lost, giving variable oxidation states.
Common mistakes
- Explaining the boron or oxygen dip by the stability of a full 2s or half-full 2p sublevel. Use the energy of the electron removed.
- Removing 3d electrons before 4s when writing a transition-metal ion. The 4s electrons always leave first.
- Writing for chromium or for copper. Both atoms have only one 4s electron.
- Saying a ligand gains or accepts electrons. A ligand donates a lone pair; the metal ion accepts it.
- Saying zinc has no d electrons. It has ten; the 3d sublevel is full in the atom and in .
Exam tips
- "Explain" an ionization energy dip: name the sublevel (or paired orbital) the electron comes from, say its energy is higher, then say less energy is needed. One marking point per sentence.
- "Deduce" the configuration of a transition-metal ion: write the atom first, then remove 4s electrons before 3d. Either the full form or the form earns the mark.
- In Paper 1A questions on complexes, add up the metal ion's charge and each ligand's charge, remembering that and are neutral.
- "Outline" the bond between a ligand and a metal ion: a coordination bond, with both electrons of the pair coming from the ligand.
Key takeaways
Practise this
76 past-paper questions on Transition elements and complexes in the Chemistry HL bank, each with a mark scheme and a worked explanation.