1.9 · SLPaper 1Paper 2

Ideal gases

In a minute

An is a model: tiny particles in random motion that never attract each other and bounce off without losing energy. Real gases follow it closely, except at high pressure and low . The model gives one equation, PV=nRTPV = nRT, linking pressure, volume, temperature and amount.

You'll be able to

  • Recognize the four assumptions of the ideal gas model.
  • Explain why real gases deviate from ideal behaviour, and why some deviate more than others.
  • Describe and interpret graphs linking pressure, volume and temperature for a fixed amount of gas.
  • Use the of a gas at STP to convert between amount and volume.
  • Solve problems with PV=nRTPV = nRT and the combined gas law in SI units, including finding a .
Before you start3 quick questions on what this builds on
Check yourself
Convert body temperature, 37 °C\pu{37 \degree C}, to . Give your answer to the nearest kelvin.
Check yourself
How many of molecules are in 7.10 g\pu{7.10 g} of chlorine, ClX2\ce{Cl2}? Give 3 significant figures.
Check yourself
Two flasks at the same temperature and pressure hold equal volumes of hydrogen and of carbon dioxide. What does say about them?

Revise first: 1.1 The particulate nature of matter, 1.6 The mole and molar mass and 1.8 Concentration and Avogadro's law

The ideal gas model

A gas is mostly empty space: in air, the molecules fill well under 1% of the volume. The pictures them flying in straight lines until they hit each other or a wall.

The model makes four assumptions about the particles.

1. They move constantly and randomly, in straight lines between collisions.

2. Their own volume is negligible compared with the volume of the container.

3. There are no intermolecular forces between them: no attractions and no repulsions.

4. All their collisions are elastic: the total kinetic energy is the same after a collision as before it.

Gas pressure comes from collisions with the walls. More frequent or harder hits mean a higher pressure.

Worked exampleOutline the assumptions the ideal gas model makes about the particles of a gas.

Try it first, then reveal one step at a time.

  1. "Outline" wants a brief account of each point: one assumption per sentence, covering motion, size, forces and collisions.
Worked exampleA sealed steel cylinder of argon is left in the sun and warms up. Its volume can't change. Explain, using the ideal gas model, why the pressure inside rises.

Try it first, then reveal one step at a time.

  1. A higher temperature means a higher average kinetic energy, so the atoms move faster.
Check yourself
Which statement is not an assumption of the ideal gas model?
Check yourself
Two gas particles collide elastically. What does "elastically" mean here?

Real gases

Real gas particles do take up some space, and they attract each other through . Under everyday conditions both effects are tiny for most gases, so they behave almost ideally.

At very high pressure, the particles are squeezed close together. Their own volume becomes a real fraction of the container, so the gas takes up more space than predicted.

At low temperature, the particles move slowly, so their attractions pull them together as they pass. They hit the walls less often and less hard, so the volume (or pressure) is less than predicted.

Under the same conditions, the stronger the attractions between the particles, the bigger the deviation.

Helium and hydrogen, with very weak , are almost ideal. Among molecules of similar size, those that form , such as NHX3\ce{NH3} and HX2O\ce{H2O}, deviate most. Larger molecules deviate more too: they have more electrons and take up more space.

Worked exampleNitrogen in a storage cylinder is held at about 20 000 kPa\pu{20 000 kPa}. Explain why, at this pressure, its volume is larger than the ideal gas model predicts.

Try it first, then reveal one step at a time.

  1. Name the condition and what it does: the molecules are pushed very close together.
Worked exampleAt 250 K\pu{250 K} and 100 kPa\pu{100 kPa}, ammonia deviates from ideal behaviour more than methane. Both molecules have 10 electrons. Explain why.

Try it first, then reveal one step at a time.

  1. Equal electron numbers mean similar London forces, so look for another force.
Check yourself
Which gas, under which conditions, behaves most like an ideal gas?
Check yourself
At very high pressure, a real gas takes up more volume than the ideal gas model predicts. Which assumption has broken down?

Pressure, volume and temperature

For a fixed amount of gas, hold one of pressure (PP), volume (VV) and temperature (TT) constant and change another: the third responds. You don't need the gas laws' names.

At constant temperature, halve the volume and the particles hit the walls twice as often, so the pressure doubles. Pressure is inversely proportional to volume, and PVPV stays constant.

At constant pressure, heated particles hit harder, so the gas expands to keep the pressure the same. Volume is directly proportional to temperature.

At constant volume, heated particles hit the walls more often and harder. Pressure is directly proportional to temperature.

Four graphs for a fixed amount of ideal gas: pressure against volume, pressure against one over volume, volume against kelvin temperature, and volume against Celsius temperature Constant temperature volume pressure 0 Constant temperature 1 / volume pressure 0 Constant pressure temperature / K volume 0 −273 °C Constant pressure temperature / °C volume 0
Lines through the origin need 1V\frac{1}{V}, or TT in kelvin, on the axis. PVPV against PP at constant temperature is horizontal.

says equal volumes of gases at the same temperature and pressure hold equal numbers of particles. So one mole of any ideal gas fills the same volume under given conditions.

The is a constant only once the temperature and pressure are fixed. At (STP: 273.15 K\pu{273.15 K} and 100 kPa\pu{100 kPa}, data booklet section 4), Vm=22.7 dm3 mol−1V_\text{m} = \pu{22.7 dm3 mol-1} (data booklet section 2).

Learn this
n=VVmn = \frac{V}{V_\text{m}}
Worked exampleCalculate the volume, in dm3\pu{dm3}, occupied by 3.20 g\pu{3.20 g} of methane, CHX4\ce{CH4}, at STP.

Try it first, then reveal one step at a time.

  1. Molar mass: M=12.01+4(1.01)=16.05 g mol−1M = 12.01 + 4(1.01) = \pu{16.05 g mol-1} (data booklet section 7).
Worked exampleA student plots the volume of a fixed amount of gas, at constant pressure, against its temperature in °C\pu{\degree C}. Describe the graph and explain why it does not pass through the origin.

Try it first, then reveal one step at a time.

  1. Describe the shape: a straight line with a positive gradient.
Check yourself
A fixed amount of gas is kept at constant temperature, and its pressure is tripled. What happens to its volume?
Check yourself
For a fixed amount of ideal gas, which plot is a straight line through the origin?
Check yourself
What amount, in mol, of nitrogen is in a 5.00 dm3\pu{5.00 dm3} flask at STP? Give 3 significant figures.

The ideal gas equation

The three relationships and Avogadro's law combine into one: PVPV is proportional to nTnT. The constant is the , RR.

In the formula booklet
PV=nRTPV = nRT

The equation and RR are in the data booklet (sections 1 and 2). With R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}, use SI units only: PP in Pa, VV in m3\pu{m3}, TT in K and nn in mol.

Conversions (data booklet sections 3 and 4): 1 kPa=1000 Pa\pu{1 kPa} = \pu{1000 Pa}; 1 dm3=1⋅10−3 m3\pu{1 dm3} = \pu{1e-3 m3}; 1 cm3=1⋅10−6 m3\pu{1 cm3} = \pu{1e-6 m3}; T(K)=t(°C)+273.15T(\text{K}) = t(\pu{\degree C}) + 273.15.

Since n=mMn = \frac{m}{M}, the equation can also give a molar mass from measured data: M=mRTPVM = \frac{mRT}{PV}.

Worked exampleA student vaporises a volatile hydrocarbon in a heated gas syringe. 0.250 g\pu{0.250 g} of vapour fills 86.7 cm3\pu{86.7 cm3} at 90 °C\pu{90 \degree C} and 101 kPa\pu{101 kPa}. Determine the molar mass of the hydrocarbon.

Try it first, then reveal one step at a time.

  1. Convert to SI: V=86.7⋅10−6 m3V = \pu{86.7e-6 m3}, P=1.01⋅105 PaP = \pu{1.01e5 Pa}, T=90+273.15=363.15 KT = 90 + 273.15 = \pu{363.15 K}.

For a fixed amount of gas, PVT=nR\frac{PV}{T} = nR stays constant when the conditions change. That gives the combined gas law.

In the formula booklet
P1V1T1=P2V2T2\frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2}

The units of PP and VV cancel here, so any unit works if both sides match. Temperature must still be in kelvin.

Worked exampleA weather balloon is filled with 12.0 m3\pu{12.0 m3} of helium at 101 kPa\pu{101 kPa} and 18 °C\pu{18 \degree C}. It rises to a height where the pressure is 27.5 kPa\pu{27.5 kPa} and the temperature is −45 °C\pu{-45 \degree C}. Calculate the new volume of the balloon.

Try it first, then reveal one step at a time.

  1. Convert the temperatures: T1=18+273.15=291.15 KT_1 = 18 + 273.15 = \pu{291.15 K} and T2=−45+273.15=228.15 KT_2 = -45 + 273.15 = \pu{228.15 K}.
Check yourself
A 0.750 dm3\pu{0.750 dm3} flask holds a gas at 22 °C\pu{22 \degree C} and 135 kPa\pu{135 kPa}. Calculate the amount of gas, in mol, to 3 significant figures.
Check yourself
A sealed, rigid can holds gas at 23 °C\pu{23 \degree C} and 100 kPa\pu{100 kPa}. It is heated to 135 °C\pu{135 \degree C}. Calculate the new pressure, in kPa, to 3 significant figures.

Common mistakes

  • Using Celsius in a gas calculation. Add 273.15273.15 first: 0 °C\pu{0 \degree C} is 273.15 K\pu{273.15 K}, not zero.
  • Mixing units in PV=nRTPV = nRT with R=8.31R = 8.31, such as kPa with m3\pu{m3} or Pa with dm3\pu{dm3}. The answer is out by a factor of 1000, so convert to Pa and m3\pu{m3} first.
  • Using 22.7 dm3 mol−1\pu{22.7 dm3 mol-1} when the gas is not at STP. Use PV=nRTPV = nRT instead.
  • Saying real gases deviate most at high temperature. Faster particles feel attractions less: deviation is greatest at low temperature and high pressure.

Exam tips

  • "Explain" a deviation: name the condition, then the assumption that fails. High pressure: particle volume is not negligible. Low temperature: intermolecular forces are significant.
  • "Calculate" with PV=nRTPV = nRT: show each conversion to Pa, m3\pu{m3} and K, the substitution, then the answer to 3 significant figures with its unit.
  • In Paper 1A graph questions, read the axes first: kelvin or Celsius, VV or 1V\frac{1}{V}.

Key takeaways

Learn thisIdeal gas: particles in random motion, negligible particle volume, no intermolecular forces, elastic collisions.
Learn thisReal gases deviate most at high pressure and low temperature. Under the same conditions, stronger intermolecular forces mean bigger deviations.
Learn thisFixed amount of gas: P∝1VP \propto \frac{1}{V} at constant TT; V∝TV \propto T at constant PP; P∝TP \propto T at constant VV, with TT in kelvin.
Learn thisMolar volume at STP (273.15 K\pu{273.15 K}, 100 kPa\pu{100 kPa}): Vm=22.7 dm3 mol−1V_\text{m} = \pu{22.7 dm3 mol-1}, so n=VVmn = \frac{V}{V_\text{m}}.
In bookletPV=nRTPV = nRT
In bookletP1V1T1=P2V2T2\frac{P_1 V_1}{T_1} = \frac{P_2 V_2}{T_2}
Learn thisIn PV=nRTPV = nRT use SI units: Pa, m3\pu{m3}, K and mol, with R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}.

Practise this

54 past-paper questions on Solutions and gases in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Solutions and gases →