Standard electrode potentials
In a minute
Every half-cell has a , , measured against the , which is set at zero. The more positive , the more easily a species is reduced. Two values give the : positive means the reaction is spontaneous, and turns it into a change.
You'll be able to
- Describe the standard hydrogen electrode and how it is used to measure .
- Use values to rank how easily species are oxidized or reduced.
- Calculate and predict whether a reaction is spontaneous forwards or in reverse.
- Determine from with and the .
Before you start3 quick questions on what this builds on
Revise first: 1.6 The mole and molar mass, 3.3 Oxidation states, 4.7 Gibbs energy and spontaneity, 5.8 Dynamic equilibrium and the equilibrium constant, 5.10 The reaction quotient and equilibrium calculations, 6.8 Oxidation, reduction and half-equations, 6.9 Reactivity of metals and halogens and 6.10 Primary and secondary cells
The standard hydrogen electrode
In a voltaic cell (6.10), two half-cells are joined by a wire and a . The voltmeter shows how much harder one half-cell pulls electrons than the other. It only ever reads that difference.
So you can't measure one half-cell on its own. Instead, chemists choose one reference half-cell, call its potential zero, and measure every other half-cell against it.
Platinum is inert, so it does not react. It carries electrons in and out, and its surface is where and swap electrons.
Standard conditions are , for gases and for each ion in solution. The symbol is , in volts.
The sign tells you which way electrons flow. If the half-cell's electrode is the positive terminal, it takes electrons from the hydrogen electrode, so is positive. If it is the negative terminal, it gives electrons away, so is negative.
Try it first, then reveal one step at a time.
- The reading is the difference between the two half-cells, and the hydrogen electrode is .
- Silver is positive, so silver ions are reduced there: they pull electrons harder than does.
- So , with a plus sign. This is the value in section 19 of the data booklet.
Try it first, then reveal one step at a time.
- List the parts: electrode, gas, solution and conditions.
- Then say where the zero comes from.
- A platinum electrode dips into a solution of , such as hydrochloric acid. Hydrogen gas at bubbles over the platinum, at . A voltmeter can only measure a potential difference between two half-cells. So this half-cell's potential is set at zero by convention, and every other half-cell is measured against it.
Reading the table: oxidizing and reducing strength
Section 19 of the data booklet lists values from most negative to most positive. Each line is a reduction : the oxidized species is on the left, the reduced species on the right.
So the strongest oxidizing agent in section 19 is , with the most positive value, and the strongest reducing agent is , with the most negative. Metals with very negative values sit high in the (6.9), but the orders don't match exactly. Lithium has the most negative value, yet it reacts with water more slowly than sodium or potassium: shows how favourable a change is, not how fast it goes.
Try it first, then reveal one step at a time.
- Find both lines: is , and is .
- Both halogens are on the left, so compare how easily each is reduced.
- for chlorine, , is more positive than for iodine, . So chlorine is more easily reduced: it gains electrons more readily. So chlorine is the stronger oxidizing agent.
Try it first, then reveal one step at a time.
- : is , is and is .
- The most negative value is aluminium's, so aluminium gives up electrons most easily.
- Oxidation is the booklet line reversed, so the electrons go on the right. Check the charge: on the left, on the right.
Cell potential and spontaneity
Join two half-cells and the one with the more positive wins the tug of war for electrons. Reduction happens there, at the . The other half-cell runs in reverse: oxidation happens at the .
Use the booklet values exactly as printed, signs included. The cathode is the half-cell where reduction happens, so a working voltaic cell always gives a positive value.
Try it first, then reveal one step at a time.
- Section 19: is and is .
- is more positive, so is reduced (cathode) and is oxidized (anode).
- .
The same sum tests any redox equation. Find the species that is reduced in the equation as written, and treat its half-cell as the cathode.
If is positive, the reaction is a as written. If it is negative, the reverse reaction is the spontaneous one.
Spontaneous does not mean fast: says a reaction can happen, not how quickly. It also holds only under standard conditions.
Try it first, then reveal one step at a time.
- In the equation gains electrons, so the hydrogen half-cell is the cathode. Silver is oxidized.
- . The 2s in the equation do not change .
- . The value is negative, so the forward reaction is not spontaneous under standard conditions: silver does not react with the acid. The reverse reaction, hydrogen reducing silver ions to silver, is spontaneous, with .
Cell potential and Gibbs energy
In 4.7, a negative standard change, , meant a reaction is spontaneous. A positive means the same, and one equation links the two.
You don't need to memorise it: it is in section 1 of the data booklet. Here is , and is the number of of electrons transferred in the equation as written.
is in section 2 of the data booklet. Coulombs times volts gives joules, so comes out in . Divide by 1000 for .
The minus sign makes the two tests agree: a positive gives a negative . A negative also means the is greater than 1, because (5.10).
Try it first, then reveal one step at a time.
- Each Mn atom gives 2 electrons to one ion, so .
- .
- Divide by 1000 and give 3 s.f. It is negative, as a positive requires.
Try it first, then reveal one step at a time.
- is reduced: . The 3 in front of does not change it.
- One Al atom loses 3 electrons, gained by 3 ions, so .
- .
- Divide by 1000 and give 3 s.f.
Common mistakes
- Subtracting the wrong way round. Take of the half-cell where reduction happens, then subtract the one where oxidation happens.
- Multiplying by the coefficients when a half-equation is doubled or tripled. Only in changes.
- Leaving in when is asked for, or dropping its minus sign.
- Saying the hydrogen electrode's was measured. It is a convention.
Exam tips
- "Deduce" or "predict" whether a reaction is spontaneous: quote both values from section 19, calculate with its sign, then state the conclusion.
- "Determine" : state , substitute into , and give the answer with its sign and units. A spontaneous reaction must give a negative value.
- In Paper 1A, wrong options often subtract the wrong way or multiply by a coefficient. Decide which species is reduced before you calculate.
Key takeaways
Practise this
74 past-paper questions on Electrochemical cells and potentials in the Chemistry HL bank, each with a mark scheme and a worked explanation.