6.19 · AHL · HL onlyPaper 1Paper 2

Electrophilic addition

In a minute

The electron-rich C=C\ce{C=C} bond of an attracts an , giving a that then gains a negative ion or water: . With an unsymmetrical alkene, the more stable carbocation decides the major product: .

You'll be able to

  • Explain why alkenes readily undergo electrophilic addition.
  • Draw the mechanisms for hydrogen halides and halogens adding to symmetrical alkenes, with .
  • Describe and explain the acid-catalysed addition of water.
  • Predict and explain the major product with an unsymmetrical alkene, using carbocation stability.
Before you start2 quick questions on what this builds on
Check yourself
The H–Cl bond breaks by , with both electrons going to Cl. What forms?
Check yourself
In 2-methylbutan-2-ol, (CHX3)X2C(OH)CHX2CHX3\ce{(CH3)2C(OH)CH2CH3}, how is the carbon bonded to OH classified?

Revise first: 2.12 Polymers, 3.7 Naming organic compounds and structural isomers, 3.8 Stereoisomers, 5.5 Reaction mechanisms and the rate-determining step, 6.15 Radicals, 6.16 Nucleophiles and electrophiles, 6.17 Lewis acids and bases, and complex ions and 6.18 Nucleophilic substitution mechanisms

Why alkenes add electrophiles: hydrogen halides

An alkene's C=C\ce{C=C} bond is a plus a . The π electrons sit above and below the plane of the molecule, exposed. So the double bond is a region of high electron density.

An is attracted to it, and the π bond, weaker than the σ bond, breaks easily. The π pair acts as a ; the electrophile is a .

The result is , a kind of : the double bond becomes single and each of its carbons gains a new atom or group.

In hydrogen bromide, Br is more electronegative, so H is δ+: this H is the electrophile.

1. A goes from the C=C\ce{C=C} bond to the H atom. A second goes from the H–Br bond to Br, which breaks by . One carbon gains H; the other is left positive: a , plus BrX−\ce{Br^-}.

2. A lone pair on BrX−\ce{Br^-} forms a bond to the positive carbon.

The carbocation is a of this : step 1 makes it and step 2 uses it up.

Electrophilic addition of hydrogen bromide to ethene: the double bond attacks the hydrogen atom, giving a carbocation and a bromide ion, which then bonds to the positive carbon C C H H H H H Br δ+ δ− step 1 CH3 C + H H Br − step 2 CH3CH2Br ethene + hydrogen bromide carbocation + bromide ion bromoethane
HBr adding to ethene. HI and HCl react the same way.
Worked exampleBut-2-ene, CHX3CH=CHCHX3\ce{CH3CH=CHCH3}, reacts with hydrogen bromide. Write the equation with condensed structural formulas, and name the product.

Try it first, then reveal one step at a time.

  1. H adds to one double-bond carbon and Br to the other. The alkene is symmetrical, so there is one product.
Worked exampleExplain why but-2-ene reacts with hydrogen bromide at room temperature but butane does not.

Try it first, then reveal one step at a time.

  1. Say what the alkene has that the alkane lacks, and what the δ+ H does.
Check yourself
In step 1 of the reaction between ethene and HBr, where does the first curly arrow start?
Check yourself
Which is the product of ethene and hydrogen iodide?

Adding a halogen

Bromine has no permanent dipole. Near the C=C\ce{C=C} bond, the high electron density repels the Br–Br bonding pair towards the far Br. This induces a dipole: the near Br becomes δ+.

The δ+ Br is now the , and the match HBr. The Br–Br bond breaks by , giving a and BrX−\ce{Br^-}.

Then BrX−\ce{Br^-} bonds to the positive carbon: one Br ends on each carbon. Chlorine and iodine add the same way.

Electrophilic addition of bromine to ethene: the double bond induces a dipole in bromine, attacks the nearer bromine atom, and the bromide ion then bonds to the carbocation C C H H H H Br Br δ+ δ− step 1 BrCH2 C + H H Br − step 2 BrCH2CH2Br ethene + bromine (dipole induced) carbocation + bromide ion 1,2-dibromoethane
The C=C\ce{C=C} bond itself polarises the bromine molecule.

Alkanes have no π bond, so they react with halogens only by substitution, which needs UV light or a high temperature (6.15). Alkenes decolourise orange-brown bromine water at room temperature.

Worked exampleHex-3-ene, CHX3CHX2CH=CHCHX2CHX3\ce{CH3CH2CH=CHCH2CH3}, reacts with chlorine. Write the equation with condensed structural formulas, and name the product.

Try it first, then reveal one step at a time.

  1. One Cl adds to each double-bond carbon, carbons 3 and 4: 3,4-dichlorohexane.
Worked exampleBromine molecules are non-polar. Explain how bromine acts as an electrophile towards ethene, and outline the mechanism.

Try it first, then reveal one step at a time.

  1. Start with how the dipole forms, then follow each electron pair.
Check yourself
When bromine adds to an alkene, how does the Br–Br bond break?
Check yourself
Which is the product of 2,3-dimethylbut-2-ene, (CHX3)X2C=C(CHX3)X2\ce{(CH3)2C=C(CH3)2}, and bromine?

Adding water: an acid catalyst

Water alone supplies almost no HX+\ce{H^+}, so it does not add. An acid catalyst supplies HX+\ce{H^+}, the . Industrially, ethene and steam are heated with a phosphoric acid catalyst.

1. A goes from the C=C\ce{C=C} bond to HX+\ce{H^+}. One carbon gains H, giving a .

2. A lone pair on the O of water bonds to the positive carbon, giving a protonated alcohol with + on oxygen.

3. An O–H bond breaks, both electrons going to O. The alcohol forms and HX+\ce{H^+} is released, so the acid is a catalyst.

Acid-catalysed hydration of ethene in three steps: the double bond attacks a hydrogen ion, water bonds to the carbocation, then the protonated alcohol loses a hydrogen ion to give ethanol Step 1: the C=C bond attacks H⁺. Step 2: a lone pair on water bonds to the carbocation. C C H H H H H + step 1 CH3 C + H H H O H ethene + H⁺ (from the acid catalyst) carbocation + water Step 3: an O–H bond breaks, giving ethanol and H⁺, so the catalyst is regenerated. step 2 CH3CH2 O + H H step 3 CH3CH2OH + H + protonated alcohol ethanol + H⁺ (catalyst back)
The HX+\ce{H^+} released in step 3 starts the cycle again.
Worked exampleWrite the equation, with condensed structural formulas and state symbols, for the industrial hydration of ethene by steam.

Try it first, then reveal one step at a time.

  1. H adds to one carbon and OH to the other; the catalyst is left out. At the high temperature used, all are gases.
Worked exampleBut-2-ene reacts with water in the presence of an acid catalyst. Outline the mechanism, and explain why the acid is described as a catalyst.

Try it first, then reveal one step at a time.

  1. Follow three steps: attack on HX+\ce{H^+}, attack by water, loss of HX+\ce{H^+}.
Check yourself
Why is an acid needed when water adds to an alkene?

Unsymmetrical alkenes: which product?

Propene, CHX3CH=CHX2\ce{CH3CH=CH2}, is unsymmetrical: with HBr it could give 2-bromopropane or 1-bromopropane.

It depends on the . H on the end CHX2\ce{CH2} leaves a secondary one, CHX3CHCHX3X+\ce{CH3CHCH3^+}; H on the middle carbon leaves a primary one, CHX3CHX2CHX2X+\ce{CH3CH2CH2^+}.

Count the alkyl groups on the positive carbon to classify it as . The step forming the more stable carbocation has the lower activation energy, so it is faster and gives the major product.

Propene and hydrogen bromide can form two carbocations. Hydrogen adding to the end carbon gives a secondary carbocation, which is more stable and leads to 2-bromopropane, the major product. Hydrogen adding to the middle carbon gives a primary carbocation, which is less stable and leads to 1-bromopropane, the minor product CH3CH=CH2 + HBr H adds to the CH₂ end H adds to the middle C CH3CHCH3 + secondary carbocation two alkyl groups: more stable Br⁻ CH3CHBrCH3 2-bromopropane: major CH3CH2CH2 + primary carbocation one alkyl group: less stable Br⁻ CH3CH2CH2Br 1-bromopropane: minor stability of carbocations: tertiary > secondary > primary
The route through the more stable carbocation gives the major product.
Worked exampleDeduce the major product of pent-1-ene, CHX2=CHCHX2CHX2CHX3\ce{CH2=CHCH2CH2CH3}, and hydrogen iodide. Write the equation with condensed structural formulas.

Try it first, then reveal one step at a time.

  1. Carbon 1 has two H atoms, carbon 2 has one, so H adds to carbon 1.
Worked example2-Methylbut-2-ene, (CHX3)X2C=CHCHX3\ce{(CH3)2C=CHCH3}, reacts with hydrogen bromide. Predict and explain the major product.

Try it first, then reveal one step at a time.

  1. H on the CH carbon leaves a tertiary carbocation; H on the other carbon leaves a secondary one.
Check yourself
What is the major product of 2-methylbut-1-ene, CHX2=C(CHX3)CHX2CHX3\ce{CH2=C(CH3)CH2CH3}, and HCl?
Check yourself
2-Methylpropene, (CHX3)X2C=CHX2\ce{(CH3)2C=CH2}, reacts with steam and an acid catalyst. What is the major product?

Common mistakes

  • Drawing the first arrow from H to the double bond. It starts at the C=C\ce{C=C} bond.
  • Leaving off the + on the carbocation, or the − and lone pair on BrX−\ce{Br^-}.
  • Bonding OH to carbon through H. The C–O bond comes from a lone pair on the oxygen of water.
  • Calling a primary carbocation the most stable, or putting the halogen on the carbon with more H atoms. Alkyl groups stabilise the charge.

Exam tips

  • "Describe and explain" a mechanism: draw each curly arrow from an electron pair, the carbocation with its charge, the anion with a lone pair, and the product.
  • "Predict and explain" a major product: name it, compare the two possible carbocations, and say why alkyl groups stabilise one more.
  • Paper 1A: when the two possible carbocations differ in stability, such as secondary and primary, an unsymmetrical alkene gives major and minor products, not equal amounts.

Key takeaways

Learn thisAlkenes undergo electrophilic addition: the electron-rich, weak π bond attacks an electrophile, giving a carbocation.
Learn thisHX: arrows from C=C\ce{C=C} to δ+ H and from H–X to X; then XX−\ce{X^-} bonds to CX+\ce{C^+}.
Learn thisXX2\ce{X2}: the C=C\ce{C=C} bond induces a dipole; one X ends on each carbon.
Learn thisWater needs an acid catalyst: HX+\ce{H^+} adds first and is regenerated at the end.
Learn thisCarbocations: tertiary > secondary > primary, as alkyl groups push electron density. The more stable one gives the major product (Markovnikov's rule).

Practise this

114 past-paper questions on Synthesis and mechanisms in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Synthesis and mechanisms →