The bonding triangle and alloys
In a minute
Most bonds are not purely ionic, covalent or metallic but a blend. The maps that blend from two values, so you can predict a compound's properties. An mixes a metal with other elements, and its non-directional metallic bonding explains why it is harder and stronger.
You'll be able to
- Describe real bonds as a blend of the three bonding models, and show this on the bonding triangle.
- Explain a substance's properties from its bonding, and say why fixed bonding categories fall short.
- Calculate and for a binary compound and place it on the bonding triangle.
- Predict the properties of a compound from its position on the triangle.
- Explain why an alloy is a , and explain its properties using non-directional metallic bonding.
Before you start3 quick questions on what this builds on
Revise first: 1.1 The particulate nature of matter, 2.1 The ionic model, 2.4 Bond and molecular polarity, 2.5 Covalent network structures and 2.10 The metallic model
Bonding as a continuum
You have met three bonding models. In the ionic model, oppositely charged ions attract: an (2.1). In the covalent model, two atoms share a pair of electrons (2.2). In the metallic model, a lattice of cations is held together by delocalized electrons: a (2.10).
Real bonds rarely fit one model exactly. In , chlorine pulls the shared pair towards itself, and that gives the bond some ionic character (2.4).
The data booklet prints the in section 17 (the van Arkel–Ketelaar triangle). Each corner is an extreme substance.
Bottom left is caesium, , which holds its outer electron weakly: pure metallic bonding.
Bottom right is fluorine, : two identical, strongly attracting atoms share a pair evenly, so the bonding is purely covalent.
At the top is caesium fluoride, . Its elements differ so much in that an electron is in effect transferred: the most ionic bonding.
Every element sits on the bottom edge, because a bond between identical atoms has no electronegativity difference. Along that edge, bonding changes from metallic on the left to covalent on the right.
Silicon and germanium sit near the metallic–covalent border. That fits their in-between behaviour: shiny, brittle solids that conduct only weakly.
Each model explains a set of properties. 1. Ionic: a lattice of ions. High melting point, brittle, conducts only when molten or dissolved.
2. Covalent: no ions or delocalized electrons, so most do not conduct. Small molecules melt easily, but a melts at a very high temperature.
3. Metallic: conducts as a solid and a liquid, and is malleable and ductile.
Try it first, then reveal one step at a time.
- Name each bonding type: magnesium is metallic, magnesium oxide is ionic.
- Conduction needs charged particles that can move. Say which move in each solid.
- Magnesium has metallic bonding: a lattice of cations in a sea of delocalized electrons. The delocalized electrons can move through the structure, so solid magnesium conducts electricity. Magnesium oxide has ionic bonding: a lattice of and ions. In the solid the ions are fixed in position and there are no delocalized electrons, so it does not conduct. Both melting points are high because strong electrostatic attractions act throughout each lattice.
Fixed categories are a simplification. A substance near a border has properties of both neighbouring models.
Try it first, then reveal one step at a time.
- Section 9: aluminium , chlorine . The difference is and the average is , on the ionic–polar covalent border.
- Low sublimation temperature and almost no conduction when molten fit covalent molecules, not a lattice of ions.
- The electronegativity difference between aluminium and chlorine is only 1.6, so the electron is not completely transferred and the bonding has a large covalent contribution. Aluminium chloride sits on the border between the ionic and polar covalent regions of the bonding triangle. Its low sublimation temperature and very poor conduction when molten are properties of covalent molecules. So the label ionic misleads: bonding is a continuum, and aluminium chloride lies between the models.
Placing a compound on the triangle
To place a binary compound (two elements, and ) on the triangle, you need two numbers, both from the electronegativities in section 9 of the data booklet.
The electronegativity difference, , goes up the vertical axis. The higher a point, the more ionic the bonding.
The average electronegativity, which the booklet writes , goes along the horizontal axis. When is small, a low average means both atoms hold electrons weakly (metallic), and a high one means both hold them strongly (covalent).
Both formulas are printed beside the triangle in section 17, and its axis labels show which value goes on which axis.
Go across to , then up to , mark the point and read the region.
The booklet also shows a rough percentage ionic character beside each height. Calculating it is not required.
Try it first, then reveal one step at a time.
- Section 9: calcium , chlorine .
- .
- .
- The point lies well inside the ionic region.
- Prediction: the ions are fixed in the solid, so it does not conduct until molten or dissolved.
The triangle gives the bonding type, not the structure. A covalent substance can be small molecules (low melting point) or a network (very high), and graphite is a network that conducts (2.5).
The period 3 oxides show the whole continuum. Across the period, the element's electronegativity rises towards oxygen's, so falls and the points move from ionic to covalent.
Sodium and magnesium oxides are ionic lattices with high melting points. Aluminium oxide also melts high, but its bonding is partly covalent.
Silicon dioxide is a covalent network with a very high melting point. Phosphorus(V) oxide and sulfur trioxide are molecular and melt far lower. More period 3 trends are in 3.1.
Try it first, then reveal one step at a time.
- Section 9: phosphorus , chlorine . and .
- The point lies in the polar covalent region.
- Melting overcomes only the forces between molecules, not the covalent bonds.
- Phosphorus trichloride has and , so it lies in the polar covalent region of the bonding triangle. It is made of small molecules, and melting only overcomes the weak intermolecular forces between them, so it has a low melting point. It has no ions and no delocalized electrons, so it does not conduct electricity.
Alloys
Examples: brass (copper and zinc), bronze (copper and tin), steel (iron and carbon) and stainless steel (iron, chromium, nickel and carbon). You needn't learn them.
An is a mixture, not a compound. Brass can have a range of copper-to-zinc ratios, so it has no fixed composition and no formula.
Every atom in an alloy is held by the same metallic bonding, so an alloy still conducts electricity and heat.
So atoms of another element can replace some metal atoms, or fit into the gaps, and still be bonded.
In a pure metal, identical cations sit in regular layers. A force slides one layer over the next and the bonding holds, so metals are malleable.
Alloys can improve other properties too: stainless steel resists corrosion, for example.
Try it first, then reveal one step at a time.
- Bonding: non-directional metallic bonding, so tin atoms fit into the copper lattice.
- Structure, then effect: different-sized atoms, irregular layers, less sliding.
- Bronze has metallic bonding, which is non-directional, so tin atoms are held in the copper lattice by the same attraction to the delocalized electrons. The tin atoms are a different size from the copper atoms, so they disrupt the regular layers of cations. The layers cannot slide over each other as easily, so bronze is harder than pure copper.
Try it first, then reveal one step at a time.
- A compound always has a fixed ratio of elements, and so a formula.
- Brass can be made with different proportions of copper and zinc.
- Brass can be made with different proportions of copper and zinc, so it has no fixed composition and no chemical formula. A compound always contains its elements in a fixed ratio. In brass, all the atoms are held by the same metallic bonding, so no new substance with a fixed ratio forms. So brass is a mixture.
Common mistakes
- Placing a substance from alone. A small difference can mean metallic or covalent bonding, so use the average electronegativity too.
- Calling an alloy a compound. It has no fixed composition and no formula, so it is a mixture.
- Explaining an alloy's hardness with "stronger bonds". Say that atoms of a different size disrupt the layers, so they slide less easily.
- Describing a metal as positive nuclei in a sea of electrons. The lattice is made of cations (positive ions), not bare nuclei.
Exam tips
- "Determine" a position on the triangle: quote both electronegativities from section 9, show and , then name the region.
- "Predict" properties: name the bonding type first, then link each property to it.
- "Explain" why an alloy is harder than the pure metal in three linked steps: atoms of a different size, disrupted layers, layers slide less easily.
- In Paper 1A, never judge the bonding from "metal plus non-metal" alone: work out both values.
Key takeaways
Practise this
97 past-paper questions on Polymers, materials, alloys and nanotechnology in the Chemistry HL bank, each with a mark scheme and a worked explanation.