6.15 · SLPaper 1Paper 2

Radicals

In a minute

A has an , so it reacts fast. UV light splits a molecule into two radicals by . Those radicals start a that swaps the hydrogen atoms of an for halogen atoms: a that gives a mixture of products.

You'll be able to

  • Identify a radical, show its unpaired electron with a dot, and explain why radicals are so reactive.
  • Explain, with an equation and fish-hook arrows, how UV light or heat splits a halogen molecule into radicals.
  • Explain why alkanes are unreactive, and write the initiation, propagation and termination steps for an alkane and a halogen.
  • Explain why the reaction gives a mixture of products.
Before you start3 quick questions on what this builds on
Check yourself
A chlorine atom is [Ne] 3s2 3p5\mathrm{[Ne]\,3s^{2}\,3p^{5}}. How many unpaired electrons does it have?
Check yourself
Which element is a halogen?
Check yourself
An alkane molecule has 7 carbon atoms. How many hydrogen atoms does it have?

Revise first: 1.4 Sublevels, orbitals and electron configurations, 3.1 The periodic table and periodicity, 3.6 Organic formulas, functional groups and homologous series and 4.5 Energy from fuels

What a radical is

In most molecules every electron is paired: in bonds or in lone pairs. A paired electron is in a low-energy, settled state.

Show the unpaired electron as a dot on the atom that carries it: Cl∙\ce{Cl\bullet} (a chlorine atom) or ∙CHX3\ce{\bullet CH3} (a methyl radical, with the dot on carbon). The dot is one electron, not a charge.

A quick test: count the total electrons. If the number is odd, at least one electron must be unpaired, so the species is a radical. (An even count does not rule it out: OX2\ce{O2} has two unpaired electrons.)

Radicals come in every type: atoms such as H∙\ce{H\bullet}, molecules such as nitrogen monoxide, NO\ce{NO} (15 electrons), cations such as the molecular ion from a mass spectrometer, and anions such as superoxide, OX2X−\ce{O2^-}.

Most radicals are highly reactive. A radical pairs its electron by forming a new covalent bond, and bond formation releases energy. So these reactions have very low activation energies and happen fast.

Worked exampleNitrogen dioxide, NOX2\ce{NO2}, is a brown gas in car exhaust. Count its total electrons and deduce whether it is a radical.

Try it first, then reveal one step at a time.

  1. Atomic numbers (data booklet, section 7): N is 7, O is 8.
Worked exampleExplain why a chlorine atom, Cl∙\ce{Cl\bullet}, is a radical, and why it is highly reactive.

Try it first, then reveal one step at a time.

  1. Count the electrons, then look at the outer sublevel.
Check yourself
Which species is a radical?
Check yourself
The superoxide ion, OX2X−\ce{O2^-}, forms in living cells. How many electrons does it have in total?

Making radicals: homolytic fission

A covalent bond is a shared pair of electrons. To make radicals, break the bond evenly, so each atom keeps one of the pair.

Compare (6.16): one atom takes both electrons, so ions form instead of radicals.

Breaking a bond always absorbs energy. Halogen–halogen bonds are weak (data booklet, section 12): Cl–Cl is 242 kJ mol−1\pu{242 kJ mol-1} and Br–Br is 193 kJ mol−1\pu{193 kJ mol-1}. UV light, or heating, supplies enough energy to break them.

Learn this
ClX2→UV2 Cl∙\ce{Cl2 ->[UV] 2Cl\bullet}

Show the movement of one electron with a single-barbed arrow, called a fish-hook arrow. Draw two: each starts at the bond and ends at one atom. A full double-barbed arrow would mean a pair of electrons moving.

Homolytic fission of a chlorine molecule: two fish-hook arrows move one electron of the shared pair to each chlorine atom, giving two chlorine radicals Cl Cl Cl + Cl UV light the bond: one shared pair two chlorine radicals
One fish-hook arrow per electron.

This step makes the radicals that start the reaction, so it is called initiation. The reverse, two radicals joining to form a bond, releases the same energy. You will meet it as termination.

Worked exampleBromine vapour is exposed to UV light. Write the equation for the homolytic fission of bromine, and describe the fish-hook arrows.

Try it first, then reveal one step at a time.

  1. Each Br atom keeps one electron of the Br–Br pair, so each becomes a radical with a dot.
Worked exampleIn the stratosphere, UV light breaks one bond in dichlorodifluoromethane, CClX2FX2\ce{CCl2F2}. Use section 12 of the data booklet to explain why a chlorine radical forms, not a fluorine radical.

Try it first, then reveal one step at a time.

  1. Look up C–Cl and C–F.
Check yourself
Which equation shows the homolytic fission of iodine, IX2\ce{I2}?
Check yourself
What does a single-barbed (fish-hook) arrow show in a mechanism?

Alkanes and halogens: the chain mechanism

Alkanes react with very little. Their C–C and C–H bonds are strong (section 12: 346346 and 414414 in kJ mol−1\pu{kJ mol-1}).

Those bonds are also almost non-polar. Carbon (2.6) and hydrogen (2.2) have similar electronegativities (section 9). So an alkane has no δ+ or δ− site to attract an ion or a polar reagent.

Alkanes are still thermodynamically unstable in air: of methane releases 891 kJ mol−1\pu{891 kJ mol-1} (section 14). But they are kinetically stable: methane does not burn until a spark supplies the activation energy.

A radical needs no polar site. It is reactive enough to pull a hydrogen atom off an alkane. So in UV light an alkane and a halogen react.

Here a hydrogen atom of the alkane is replaced by a halogen atom. For methane and chlorine the overall change is CHX4+ClX2→CHX3Cl+HCl\ce{CH4 + Cl2 -> CH3Cl + HCl}. It happens through a series of radical steps.

1. Initiation: UV light splits the halogen, ClX2→2 Cl∙\ce{Cl2 -> 2Cl\bullet}. Radicals are made.

2. Propagation: a radical reacts with a molecule and makes a new radical. The chlorine radical takes a hydrogen atom, CHX4+Cl∙→∙CHX3+HCl\ce{CH4 + Cl\bullet -> \bullet CH3 + HCl}. The methyl radical then takes a chlorine atom, ∙CHX3+ClX2→CHX3Cl+Cl∙\ce{\bullet CH3 + Cl2 -> CH3Cl + Cl\bullet}.

3. Termination: two radicals join, so radicals are used up. Any pair can meet: Cl∙+Cl∙→ClX2\ce{Cl\bullet + Cl\bullet -> Cl2}, ∙CHX3+Cl∙→CHX3Cl\ce{\bullet CH3 + Cl\bullet -> CH3Cl} or ∙CHX3+∙CHX3→CX2HX6\ce{\bullet CH3 + \bullet CH3 -> C2H6}.

The chain reaction of methane and chlorine: initiation makes chlorine radicals, two propagation steps pass a radical round a loop, and termination ends the chain Initiation: Cl2 → 2Cl• (UV light) CH4 + Cl• → •CH3 + HCl •CH3 + Cl2 → CH3Cl + Cl• Termination: two radicals join, e.g. •CH3 + Cl• → CH3Cl propagation 1 propagation 2 •CH3 passes on Cl• made again
The two propagation steps form a loop: the chlorine radical used in step 1 is made again in step 2.

How to tell the steps apart: count radicals. Initiation has none on the left and two on the right. Propagation has one on each side. Termination has two on the left and none on the right.

Worked exampleEthane reacts with chlorine in UV light. Write the propagation step in which a chlorine radical attacks an ethane molecule.

Try it first, then reveal one step at a time.

  1. The chlorine radical removes a hydrogen atom, forming HCl\ce{HCl}.
Worked exampleIn the bromination of ethane, one propagation step is CHX3CHX2∙+BrX2→CHX3CHX2Br+Br∙\ce{CH3CH2\bullet + Br2 -> CH3CH2Br + Br\bullet}. Use section 12 of the data booklet to calculate its enthalpy change.

Try it first, then reveal one step at a time.

  1. Bonds broken: one Br–Br, 193 kJ mol−1\pu{193 kJ mol-1}.
Check yourself
Why are alkanes unreactive towards most ions and polar reagents?
Check yourself
Which equation is a termination step in the bromination of ethane?

Why you get a mixture of products

Radical substitution is hard to control. A chlorine radical takes almost any hydrogen atom it collides with, in whichever molecule.

Three things give a mixture. First, the product still has C–H bonds, so further substitution follows: CHX3Cl\ce{CH3Cl} goes on to CHX2ClX2\ce{CH2Cl2}, CHClX3\ce{CHCl3} and CClX4\ce{CCl4}.

Second, in a longer alkane the hydrogens sit on different carbons. Replacing different ones gives structural isomers (3.7): butane gives both 1-chlorobutane and 2-chlorobutane.

Third, termination joins any two radicals. Two alkyl radicals give a longer alkane, such as ethane from two methyl radicals.

Using a large excess of the alkane makes a halogen radical more likely to meet an alkane molecule than a product molecule. That favours one substitution, but a mixture still forms.

Worked exampleDuring the chlorination of ethane, a little butane forms. Write the termination step that produces it.

Try it first, then reveal one step at a time.

  1. Butane has 4 carbons, so two 2-carbon radicals must join.
Worked exampleEthane and chlorine react in UV light. Explain why the organic product is a mixture rather than pure chloroethane.

Try it first, then reveal one step at a time.

  1. Give the reasons that apply to ethane: further substitution and termination. (All six hydrogens of ethane are equivalent, so there is only one monochloro product.)
Check yourself
Pentane, CHX3CHX2CHX2CHX2CHX3\ce{CH3CH2CH2CH2CH3}, reacts with chlorine in UV light. How many structural isomers of CX5HX11Cl\ce{C5H11Cl} can form?
Check yourself
Which substance does NOT form when methane reacts with chlorine in UV light?

Common mistakes

  • Leaving the dot off a radical. Every radical in every step needs its dot.
  • Making a hydrogen radical in propagation. The halogen radical takes a hydrogen atom to form the hydrogen halide.
  • Writing ions such as ClX+\ce{Cl^+} and ClX−\ce{Cl^-} for initiation. That is heterolytic fission; UV light gives two radicals.
  • Drawing a double-barbed arrow for homolytic fission. Use two fish-hook arrows, one per electron.
  • Saying breaking the halogen bond releases energy. Bond breaking absorbs energy, which is why UV light or heat is needed.

Exam tips

  • "Explain, using equations" the mechanism: write one equation per step, name each step (initiation, propagation, termination), give UV light for initiation and put a dot on every radical.
  • "State" a termination step: any two radicals joining earns the mark. Check that it balances and has two radicals on the left, none on the right.
  • "Explain" a mixture of products: give further substitution and termination products, and for longer alkanes the different hydrogen positions.

Key takeaways

Learn thisA radical has an unpaired electron, shown as a dot (Cl∙\ce{Cl\bullet}, ∙CHX3\ce{\bullet CH3}). An odd electron count means a radical. Most radicals are highly reactive.
Learn thisHomolytic fission: each atom keeps one bonding electron. Initiation: ClX2→UV2 Cl∙\ce{Cl2 ->[UV] 2Cl\bullet}, drawn with two fish-hook (single-barbed) arrows.
Learn thisPropagation: CHX4+Cl∙→∙CHX3+HCl\ce{CH4 + Cl\bullet -> \bullet CH3 + HCl}, then ∙CHX3+ClX2→CHX3Cl+Cl∙\ce{\bullet CH3 + Cl2 -> CH3Cl + Cl\bullet}. Termination: any two radicals join.
Learn thisAlkanes are unreactive towards ions and polar reagents because C–C and C–H bonds are strong and almost non-polar.
Learn thisMixture of products: further substitution, different hydrogen positions (isomers) and termination products.

Practise this

114 past-paper questions on Synthesis and mechanisms in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Synthesis and mechanisms →