2.7 · SLPaper 1Paper 2

Chromatography

In a minute

separates a . Each component is carried by a moving and held back by a fixed , so components held back less travel further. The , RFR_\text{F}, turns that distance into a number that helps identify each component.

You'll be able to

  • Explain how chromatography separates the components of a mixture by their relative attractions to the mobile and stationary phases.
  • Use polarity and to predict which component moves further.
  • Describe how to run a paper or thin-layer chromatogram, and explain each precaution.
  • Calculate and interpret RFR_\text{F} values, and use them to identify the components of a mixture.
Before you start3 quick questions on what this builds on
Check yourself
Which of these is a ?
Check yourself
What is the strongest between molecules of methanol, CHX3OH\ce{CH3OH}?
Check yourself
Which of these liquids is made of non-polar molecules?

Revise first: 1.1 The particulate nature of matter, 2.1 The ionic model, 2.2 Covalent bonds and Lewis formulas, 2.4 Bond and molecular polarity and 2.6 Intermolecular forces

How chromatography separates a mixture

Picture a crowd walking down a street of shops. People who keep stopping to look fall behind; people who ignore the shops get furthest. Chromatography separates molecules the same way.

The "street" is a , a liquid that moves through the paper or up the plate. The "shops" are the , which stays still.

Each molecule keeps switching between the two phases. It moves only while it is in the mobile phase.

The attractions are . They form and break as a component moves, but no covalent bonds break, so the components come out unchanged.

In thin-layer chromatography (TLC), the stationary phase is silica, SiOX2\ce{SiO2}, on a plate. Its surface is covered in −OH\ce{-OH} groups, so it is very polar. In paper chromatography, it is water held in the paper's fibres, which is also polar.

So with a polar stationary phase and a non-polar solvent, polar components are held back most and non-polar components move furthest.

Worked exampleA TLC plate coated with silica is run with hexane as the mobile phase. The sample is a mixture of hexadecane, CX16HX34\ce{C16H34}, and hexadecan-1-ol, CX16HX33OH\ce{C16H33OH}. Explain which compound moves further up the plate.

Try it first, then reveal one step at a time.

  1. Silica is polar, with −OH\ce{-OH} groups.
Worked exampleThe plate from the previous example is run again with a more polar mobile phase: a mixture of hexane and ethyl ethanoate. Predict and explain how the distance moved by hexadecan-1-ol changes.

Try it first, then reveal one step at a time.

  1. Ethyl ethanoate has polar bonds to oxygen, so the new solvent is more polar.
Check yourself
A mixture is separated on a silica TLC plate using a non-polar solvent. Which component moves furthest?
Check yourself
One component of a mixture hardly moves from where it was spotted. What is the best explanation?

Running a paper or TLC chromatogram

The method is the same for paper and TLC. TLC is faster and gives sharper spots.

1. Draw a pencil line, the baseline, about 1 cm\pu{1 cm} above the bottom of the paper or plate.

2. Put a small, concentrated spot of each sample on the line, with known reference substances beside it.

3. Stand the plate in a tank of solvent, with the solvent below the baseline. Put the lid on to keep solvent from evaporating off the plate.

4. Let the solvent rise. Take the plate out before the solvent reaches the top.

5. Mark the solvent front in pencil straight away, before the solvent evaporates.

6. Mark each spot. Colourless compounds need an extra step to show them, which you don't need to know.

A thin-layer chromatography plate standing upright in a glass tank with a lid. A shallow layer of solvent covers the bottom of the tank. A pencil baseline is drawn across the plate just above the solvent surface. Two small pencil crosses on the baseline mark where a sample and a reference were spotted. The solvent has soaked up the plate to a dashed line, the solvent front, and the spots have moved up from the baseline: the sample has split into two spots, and the reference spot sits level with the upper sample spot. lid solvent front separated spots pencil baseline solvent (mobile phase) plate coated with silica (stationary phase) sample reference
The sample's upper spot is level with the reference, so the sample probably contains that substance. The lower spot is something else.
Worked exampleExplain why the baseline is drawn in pencil and not in ink.

Try it first, then reveal one step at a time.

  1. Ink is itself a mixture.
Worked exampleExplain why the solvent in the tank must be below the baseline.

Try it first, then reveal one step at a time.

  1. Picture the spots under the solvent surface.
Check yourself
Why must the solvent front be marked as soon as the plate is taken out of the tank?

Retardation factor, $R_\text{F}$

How far a spot moves depends on how long the plate runs. Dividing by the solvent's distance removes that.

Learn this
RF=distance moved by componentdistance moved by solvent frontR_\text{F} = \frac{\text{distance moved by component}}{\text{distance moved by solvent front}}

Measure both distances from the baseline: to the centre of the spot, and to the solvent front.

A component can't outrun the solvent carrying it, so RFR_\text{F} lies between 0 and 1. It has no units.

A developed chromatogram. A pencil baseline runs across near the bottom of the plate and a dashed solvent front runs across near the top. One blue spot sits partway up. Two vertical measuring arrows start at the baseline. The shorter one ends level with the centre of the spot and is labelled 5.7 centimetres, distance moved by the component. The longer one ends at the solvent front and is labelled 9.2 centimetres, distance moved by the solvent front. 5.7 cm 9.2 cm solvent front centre of spot baseline component solvent front
Both distances start at the baseline. The spot's distance ends at its centre.
Worked exampleA student runs a TLC of a purple ink. The solvent front is 9.2 cm\pu{9.2 cm} above the baseline. The centre of the blue spot is 5.7 cm\pu{5.7 cm} above the baseline. Calculate RFR_\text{F} for the blue dye.

Try it first, then reveal one step at a time.

  1. RF=5.79.2=0.6196…R_\text{F} = \frac{5.7}{9.2} = 0.6196\ldots

A bigger RFR_\text{F} means more attraction to the mobile phase, relative to the stationary phase.

A compound's RFR_\text{F} only repeats under the same conditions: same stationary phase, solvent and temperature. So compare a sample with references run on the same plate.

A mixture gives more than one spot. One spot does not prove purity: two compounds can share an RFR_\text{F} in one solvent, so run it again in another.

Worked exampleA green food colouring is run on a TLC plate. The solvent front is 8.0 cm\pu{8.0 cm} above the baseline. Two spots appear, with centres 1.6 cm\pu{1.6 cm} and 5.2 cm\pu{5.2 cm} above the baseline. Under the same conditions, three food dyes have these RFR_\text{F} values: brilliant blue 0.200.20, carmoisine 0.420.42, tartrazine 0.650.65. Deduce which dyes the colouring contains.

Try it first, then reveal one step at a time.

  1. Calculate RFR_\text{F} for each spot.
Check yourself
On a paper chromatogram, the solvent front is 6.8 cm\pu{6.8 cm} above the baseline. A spot's centre is 2.3 cm\pu{2.3 cm} above the baseline. Calculate RFR_\text{F} to 2 decimal places.
Check yourself
A TLC plate has its baseline 1.5 cm\pu{1.5 cm} above the bottom edge. After the run, the solvent front is 8.6 cm\pu{8.6 cm} above the baseline and a spot's centre is 4.9 cm\pu{4.9 cm} above the baseline. What is RFR_\text{F} for the spot?
Check yourself
On a silica plate with a non-polar solvent, spot X has RF=0.12R_\text{F} = 0.12 and spot Y has RF=0.81R_\text{F} = 0.81. Which statement is correct?

Common mistakes

  • Dividing the wrong way round. RFR_\text{F} is the spot's distance over the solvent front's, so it is never above 1.
  • Measuring from the plate's edge or to the top of a spot. Measure from the baseline to the spot's centre.
  • Saying "polar compounds move further". On silica with a non-polar solvent, polar compounds move less.
  • Comparing RFR_\text{F} values from different solvents or plates. They only match under identical conditions.
  • Saying covalent bonds break as a component moves. Only intermolecular forces form and break.

Exam tips

  • "Calculate" RFR_\text{F}: show the division with both distances from the baseline, then the value with no units.
  • "Explain" which component moves further: name the forces with each phase, say which phase attracts it more, then link to distance. One point per sentence.
  • In Paper 1A, rule out any RFR_\text{F} above 1 first.
  • For a practical precaution, give the action and the reason: "pencil, because graphite does not dissolve in the solvent".

Key takeaways

Learn thisChromatography separates components by their relative attraction, through intermolecular forces, to the stationary and mobile phases.
Learn thisMore attraction to the mobile phase means further travel. On polar silica or paper with a non-polar solvent, the least polar component moves furthest.
Learn thisRF=distance moved by componentdistance moved by solvent frontR_\text{F} = \frac{\text{distance moved by component}}{\text{distance moved by solvent front}}
Learn thisMeasure both distances from the baseline, to the centre of the spot. RFR_\text{F} has no units and lies between 0 and 1.
Learn thisCompare RFR_\text{F} values only under the same conditions. One spot does not prove a substance is pure.
Learn thisPractical: pencil baseline above the solvent level, lid on the tank, mark the solvent front at once.

Practise this

132 past-paper questions on Mass spectrometry, IR, NMR and chromatography in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Mass spectrometry, IR, NMR and chromatography →