6.3 · SLPaper 1Paper 2

Strong and weak acids, neutralization and pH curves

In a minute

A ionizes completely in water; a only partly. Strength is about the extent of , not concentration. Acids and bases react in , and a tracks it on a curve that jumps steeply at the .

You'll be able to

  • Tell strong acids and bases from weak ones by the extent of ionization, and strength from concentration.
  • Use the position of an acid–base equilibrium to compare the strengths of conjugate acids and bases.
  • Write equations for acids reacting with metal oxides, hydroxides, carbonates, hydrogencarbonates, ammonia and , and identify a salt's parent acid and base.
  • Sketch and interpret the pH curve for a strong acid and a , including its intercept and equivalence point.
  • Use a titration result to calculate an unknown concentration.
Before you start3 quick questions on what this builds on
Check yourself
In HNOX3+HX2O→HX3OX++NOX3X−\ce{HNO3 + H2O -> H3O^+ + NO3^-}, which species is the conjugate base of HNOX3\ce{HNO3}?
Check yourself
A solution has [HX+]=2.5⋅10−3 mol dm−3[\ce{H^+}] = \pu{2.5e-3 mol dm-3}. What is its pH, to 2 decimal places?
Check yourself
What amount, in mol, of NaOH\ce{NaOH} is in 15.0 cm3\pu{15.0 cm3} of 0.200 mol dm−3\pu{0.200 mol dm-3} solution?

Revise first: 1.6 The mole and molar mass, 1.8 Concentration and Avogadro's law, 3.2 Group trends and the oxides of elements, 3.6 Organic formulas, functional groups and homologous series, 4.1 Measuring enthalpy changes, 5.8 Dynamic equilibrium and the equilibrium constant, 6.1 Brønsted–Lowry acids and bases and 6.2 The pH scale and Kw

Strong and weak acids and bases

Hydrochloric acid and ethanoic acid can have the same concentration. Yet the hydrochloric acid has a lower pH, conducts electricity better and fizzes faster with magnesium. The difference is how much of each acid splits into ions.

A donates a proton to water, forming HX3OX+\ce{H3O^+} (6.1). How completely this happens sets the acid's strength.

HCl(aq)+HX2O(l)→HX3OX+(aq)+ClX−(aq)\ce{HCl(aq) + H2O(l) -> H3O^+(aq) + Cl^-(aq)}. The one-way arrow shows complete ionization: no HCl\ce{HCl} molecules are left.

Learn these strong acids: hydrochloric acid HCl\ce{HCl}, nitric acid HNOX3\ce{HNO3} and sulfuric acid HX2SOX4\ce{H2SO4}. Hydrobromic acid HBr\ce{HBr} and hydroiodic acid HI\ce{HI} are strong too. Sulfuric acid loses its first proton completely.

CHX3COOH(aq)+HX2O(l)⇌CHX3COOX−(aq)+HX3OX+(aq)\ce{CH3COOH(aq) + H2O(l) <=> CH3COO^-(aq) + H3O^+(aq)}. The equilibrium arrow shows a that lies well to the left. Ethanoic acid and the other are weak.

The group 1 hydroxides are strong bases: KOH(s)→KX+(aq)+OHX−(aq)\ce{KOH(s) -> K^+(aq) + OH^-(aq)} in water. They are soluble, so they are .

NHX3(aq)+HX2O(l)⇌NHX4X+(aq)+OHX−(aq)\ce{NH3(aq) + H2O(l) <=> NH4^+(aq) + OH^-(aq)}. Ammonia and the , such as methylamine CHX3NHX2\ce{CH3NH2}, are weak bases.

Strength and concentration are different ideas. Concentration is the amount of acid dissolved per dm3\pu{dm3}, its . Strength is the fraction of it that ionizes.

Four boxes of acid solution in a two by two grid, water molecules not shown. Columns: concentrated on the left, dilute on the right. Rows: strong acid on top, weak acid below. Strong and concentrated: eight hydronium ions and eight anions, no acid molecules left. Strong and dilute: three hydronium ions and three anions, no acid molecules left. Weak and concentrated: seven un-ionized acid molecules, labelled HA, with only one hydronium ion and one anion. Weak and dilute: two HA molecules with one hydronium ion and one anion. Key: plus in a circle is a hydronium ion, minus in a circle is the anion A minus, HA is an un-ionized acid molecule. concentrated dilute strong acid weak acid + − + − + − + − + − + − + − + − + − + − + − HA HA HA HA HA HA HA + − HA HA + − + H₃O⁺ ion − A⁻ ion HA un-ionized acid molecule
Concentration is how many acid particles there are. Strength is what fraction of them have ionized.

So 5 mol dm−3\pu{5 mol dm-3} ethanoic acid is concentrated but weak. And 0.001 mol dm−3\pu{0.001 mol dm-3} nitric acid is dilute but strong.

Every Brønsted–Lowry acid–base equilibrium has an acid and a base on each side. The position of equilibrium tells you which pair is stronger.

For ethanoic acid, HX3OX+\ce{H3O^+} is a stronger acid than CHX3COOH\ce{CH3COOH}, and CHX3COOX−\ce{CH3COO^-} is a stronger base than HX2O\ce{H2O}. So the equilibrium lies to the left. For HCl\ce{HCl}, ClX−\ce{Cl^-} is so weak a base that the reverse reaction is negligible.

So the weaker the acid, the stronger its conjugate base. In terms of the (5.8), a strong acid's ionization has K≫1K \gg 1 and a weak acid's has a small KK, usually much less than 1.

At the same concentration, a strong acid has a higher [HX3OX+][\ce{H3O^+}] than a weak one. So it has a lower pH, conducts better (more ions) and reacts faster with magnesium or a carbonate.

Strength does not change how much base an acid needs. Equal amounts of a strong and a weak monoprotic acid neutralize the same amount of NaOH\ce{NaOH}: the weak acid keeps ionizing as its HX3OX+\ce{H3O^+} is used up.

Worked exampleA 0.0800 mol dm−3\pu{0.0800 mol dm-3} solution of propanoic acid, CHX3CHX2COOH\ce{CH3CH2COOH}, has a pH of 2.982.98. Calculate the percentage of propanoic acid molecules that are ionized.

Try it first, then reveal one step at a time.

  1. Each ionized molecule gives one HX3OX+\ce{H3O^+}, so [HX3OX+][\ce{H3O^+}] is the concentration that has ionized.
Worked example0.100 mol dm−3\pu{0.100 mol dm-3} nitric acid conducts electricity much better than 0.100 mol dm−3\pu{0.100 mol dm-3} ethanoic acid. Explain why.

Try it first, then reveal one step at a time.

  1. The concentrations are equal, so the difference must be strength.
Check yourself
A bottle holds 6.0 mol dm−3\pu{6.0 mol dm-3} ethanoic acid. How is it best described?
Check yourself
For methanoic acid, HCOOH+HX2O⇌HCOOX−+HX3OX+\ce{HCOOH + H2O <=> HCOO^- + H3O^+}, the equilibrium lies to the left. Which statement is correct?

Neutralization reactions

With aqueous strong acids and hydroxides, the reaction is between ions: HX+(aq)+OHX−(aq)→HX2O(l)\ce{H^+(aq) + OH^-(aq) -> H2O(l)}. The other ions are spectators unless they form an insoluble salt. This reaction is , so the mixture warms up.

The products depend on the type of base:

Learn this
acid+metal oxide→salt+wateracid+metal hydroxide→salt+wateracid+carbonate→salt+water+carbon dioxideacid+hydrogencarbonate→salt+water+carbon dioxideacid+ammonia→ammonium salt\begin{aligned} \text{acid} + \text{metal oxide} &\to \text{salt} + \text{water} \\ \text{acid} + \text{metal hydroxide} &\to \text{salt} + \text{water} \\ \text{acid} + \text{carbonate} &\to \text{salt} + \text{water} + \text{carbon dioxide} \\ \text{acid} + \text{hydrogencarbonate} &\to \text{salt} + \text{water} + \text{carbon dioxide} \\ \text{acid} + \text{ammonia} &\to \text{ammonium salt} \end{aligned}

The salt takes its positive ion from the base and its negative ion from the acid. Hydrochloric acid gives chlorides, nitric acid nitrates, sulfuric acid sulfates, and ethanoic acid ethanoates.

Most metal oxides, such as CuO\ce{CuO}, are basic, so they neutralize acids. Contrast an such as COX2\ce{CO2} (3.2), which neutralizes bases.

Ammonia and amines accept a proton from the acid, so no water forms: NHX3(aq)+HNOX3(aq)→NHX4NOX3(aq)\ce{NH3(aq) + HNO3(aq) -> NH4NO3(aq)} and CHX3NHX2(aq)+HCl(aq)→CHX3NHX3Cl(aq)\ce{CH3NH2(aq) + HCl(aq) -> CH3NH3Cl(aq)}.

Organic acids react in the same way, through the H of their : CHX3COOH(aq)+NaOH(aq)→CHX3COONa(aq)+HX2O(l)\ce{CH3COOH(aq) + NaOH(aq) -> CH3COONa(aq) + H2O(l)} gives sodium ethanoate.

To find a salt's parent acid and base, split it into its ions. Add HX+\ce{H^+} ions to the negative ion until it is neutral to get the acid. A metal ion comes from a metal hydroxide (or oxide or carbonate), and NHX4X+\ce{NH4^+} comes from ammonia.

Worked exampleWrite a balanced equation, with state symbols, for calcium carbonate powder reacting with dilute nitric acid.

Try it first, then reveal one step at a time.

  1. Acid + carbonate gives salt + water + carbon dioxide.
Worked exampleSodium propanoate, CHX3CHX2COONa\ce{CH3CH2COONa}, is a food preservative. Identify its parent acid and base, and write an equation for the neutralization that makes it.

Try it first, then reveal one step at a time.

  1. Its ions are NaX+\ce{Na^+} and CHX3CHX2COOX−\ce{CH3CH2COO^-}.
Check yourself
Which equation shows magnesium oxide neutralizing hydrochloric acid?
Check yourself
Which acid and base react to form ammonium sulfate, (NHX4)X2SOX4\ce{(NH4)2SO4}?

Titration and pH curves

With a of known concentration in the burette, a titration finds the concentration of the other solution.

It is also called the stoichiometric point, because the amounts match the stoichiometry of the equation.

An indicator is a dye whose colour depends on pH. A good one changes colour very close to the equivalence point. But the end point is an observation, while the equivalence point is a fixed amount of reactant.

A pH meter can log the pH as the base goes in. A graph of pH against volume added is a pH curve.

pH curve for adding 0.100 mol per cubic decimetre sodium hydroxide to 25.0 cubic centimetres of 0.100 mol per cubic decimetre hydrochloric acid. pH on the vertical axis from 0 to 14, volume of sodium hydroxide added on the horizontal axis from 0 to 50 cubic centimetres. The curve starts at pH 1.00 on the pH axis, rises slowly to about pH 2 at 22 cubic centimetres, then rises almost vertically from about pH 3 to about pH 11 around 25.0 cubic centimetres. The equivalence point is marked at 25.0 cubic centimetres and pH 7.00, with dashed lines to both axes. After it the curve levels off, reaching about pH 12.5 at 50 cubic centimetres. 0 10 20 30 40 50 0 2 4 6 8 10 12 14 volume of NaOH(aq) added / cm³ pH start: pH 1.00 (the acid alone) equivalence point 25.0 cm³, pH 7.00 steep rise, pH 3 to 11 excess NaOH
0.100 mol dm−3\pu{0.100 mol dm-3} NaOH\ce{NaOH} added to 25.0 cm3\pu{25.0 cm3} of 0.100 mol dm−3\pu{0.100 mol dm-3} HCl\ce{HCl}.

1. Intercept. The curve meets the pH axis at the pH of the acid alone. A strong monoprotic acid is fully ionized, so [HX+][\ce{H^+}] equals its concentration: −log⁡100.100=1.00-\log_{10} 0.100 = 1.00.

2. Slow rise. At first most of the HX+\ce{H^+} is still there. Because pH is a log scale, the pH has risen by less than 1 even when half of it has gone.

3. Steep jump. Near the equivalence point, a fraction of a cm3\pu{cm3} removes the last HX+\ce{H^+} and then leaves OHX−\ce{OH^-} in excess. The pH leaps from about 3 to about 11.

4. Equivalence point. It sits in the middle of the steep part. The salt NaCl\ce{NaCl} is neutral, so the pH there is 7.00 at 298 K\pu{298 K}. Read the equivalence volume off the horizontal axis.

5. Levelling off. Excess OHX−\ce{OH^-} takes the pH towards that of the alkali itself: about 12.5 by 50 cm3\pu{50 cm3}, heading towards 13.

Adding acid to alkali gives the mirror image. The curve starts high, falls slowly, then drops steeply through pH 7 at the equivalence point.

To find an unknown concentration (1.8): work out n=cVn = cV for the solution you know, use the equation's ratio, then divide by the volume of the unknown.

Worked example0.0400 mol dm−3\pu{0.0400 mol dm-3} potassium hydroxide is added to 30.0 cm3\pu{30.0 cm3} of 0.0400 mol dm−3\pu{0.0400 mol dm-3} nitric acid until 60 cm3\pu{60 cm3} has been added. Describe the key features of the pH curve.

Try it first, then reveal one step at a time.

  1. Intercept: the acid is strong and monoprotic, so [HX+]=0.0400[\ce{H^+}] = 0.0400 and pH=−log⁡100.0400=1.40\mathrm{pH} = -\log_{10} 0.0400 = 1.40.
Worked example25.0 cm3\pu{25.0 cm3} of nitric acid is titrated with 0.120 mol dm−3\pu{0.120 mol dm-3} potassium hydroxide. The pH curve shows the equivalence point at 21.35 cm3\pu{21.35 cm3}. Calculate the concentration of the nitric acid.

Try it first, then reveal one step at a time.

  1. HNOX3+KOH→KNOX3+HX2O\ce{HNO3 + KOH -> KNO3 + H2O}, a 1:11:1 ratio.
Check yourself
18.0 cm3\pu{18.0 cm3} of 0.150 mol dm−3\pu{0.150 mol dm-3} HCl\ce{HCl} is titrated with 0.200 mol dm−3\pu{0.200 mol dm-3} NaOH\ce{NaOH}. At what volume of NaOH\ce{NaOH}, in cm3\pu{cm3}, is the equivalence point?
Check yourself
Which statement about an acid–base titration is correct?

Common mistakes

  • Writing "strong" when you mean "concentrated". Strength is the extent of ionization; concentration is the amount dissolved per dm3\pu{dm3}.
  • Using →\ce{->} for a weak acid's ionization or ⇌\ce{<=>} for a strong acid's. The arrow shows whether ionization is complete.
  • Thinking a weak acid needs less base. Equal amounts of monoprotic acid need equal amounts of base, whatever their strength.
  • Leaving out COX2\ce{CO2} when an acid reacts with a carbonate or hydrogencarbonate, or writing HX2COX3\ce{H2CO3} in its place.
  • Starting a strong acid's pH curve at pH 7. It starts on the pH axis, at the pH of the acid alone.

Exam tips

  • "Distinguish" strong from weak acids: state complete versus partial ionization, then give one difference you could observe at equal concentration (pH, conductivity or rate of bubbling).
  • "Sketch" a pH curve: pH on the vertical axis and volume on the horizontal axis, never the other way round. Start at the acid's pH, show the steep section, and mark the equivalence volume and pH 7.
  • On Paper 1A, check that neutralization products include COX2\ce{CO2} for carbonates and no water for ammonia. On Paper 2, give state symbols when the question asks for them.

Key takeaways

Learn thisStrong acids (HCl\ce{HCl}, HNOX3\ce{HNO3}, HX2SOX4\ce{H2SO4}) and group 1 hydroxides ionize completely. Weak acids (carboxylic acids) and weak bases (NHX3\ce{NH3}, amines) ionize partially.
Learn thisStrong or weak is the extent of ionization. Concentrated or dilute is the amount dissolved per dm3\pu{dm3}.
Learn thisAn acid–base equilibrium lies towards the weaker acid and weaker base. The weaker the acid, the stronger its conjugate base.
Learn thisAcid + metal oxide or hydroxide gives salt + water. Acid + carbonate or hydrogencarbonate gives salt + water + COX2\ce{CO2}. Acid + ammonia gives an ammonium salt.
Learn thisStrong acid and strong base pH curve: starts at the acid's pH, rises slowly, jumps steeply, equivalence point at pH 7 (298 K\pu{298 K}), then levels off.
Learn thisEnd point: the indicator changes colour. Equivalence point: the amounts are in the equation's ratio.

Practise this

103 past-paper questions on pH, strong and weak acids and bases, Ka and Kb in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise pH, strong and weak acids and bases, Ka and Kb →