Reaction mechanisms and the rate-determining step
In a minute
Most reactions happen in a series of : the . The slowest step, the , sets the rate. On an each step is a hump with a at its peak, and each sits in a dip. The of a step is how many particles react in it.
You'll be able to
- Check that the steps of a mechanism add up to the overall equation, and pick out and .
- Deduce the rate equation from the , including when it is not the first step, and evaluate proposed mechanisms against kinetic data.
- Construct and interpret energy profiles for multistep reactions, telling from intermediates.
- Interpret unimolecular, bimolecular and termolecular for an .
Before you start3 quick questions on what this builds on
Revise first: 4.1 Measuring enthalpy changes, 5.3 Rates of reaction and collision theory and 5.4 Activation energy and catalysts
Mechanisms and elementary steps
An overall equation such as shows what goes in and comes out, not how. Three or more particles rarely meet at the same instant with enough energy and the right orientation, so most reactions happen in a series of simpler steps.
A is a model: it is proposed to explain experimental data. Its first test is the stoichiometry. Add the and cancel anything that appears on both sides. The result must be the overall equation.
Try it first, then reveal one step at a time.
- Add the left sides: . Add the right sides: .
- A chlorine atom, , is on both sides: it is made in step 1 and used in step 2. Cancel it. It is the intermediate.
- Collect what is left and check the atoms: 2 N, 4 O and 2 Cl on each side.
- , with a chlorine atom as the intermediate
A can also cancel out, but the other way round. It is used up in an early step and made again in a later one, so it is there at the start and at the end. An intermediate appears only part-way through.
Try it first, then reveal one step at a time.
- Follow each ion. : used in step 1, made in step 2.
- : made in step 1, used in step 2.
- The iodide ion reacts in step 1 and is formed again in step 2, so it is regenerated: it is a catalyst. The ion is formed in step 1 and used up in step 2, so it is a reaction intermediate. Neither appears in the overall equation, .
The rate-determining step
The steps of a mechanism run at different speeds. The reaction can go no faster than its slowest step, as a queue moves only as fast as its one ticket desk.
Kinetic data link to it through the , found by experiment (5.6). For example, : the power on each concentration is the with respect to that reactant.
Only species that take part in the , or in fast steps before it, appear in the rate equation. A reactant that joins after the slow step does not: its order is zero.
If the slow step is first, read the rate equation off that step: each reactant, to the power of its coefficient in the step. For above, step 1 is slow, so .
If the slow step comes later, the fast steps before it reach a quick equilibrium that makes an intermediate. The intermediate can't go in the rate equation, but its concentration depends on the reactants that form it. So swap it for those reactants.
Try it first, then reveal one step at a time.
- Step 2 is the rate-determining step, so the rate depends on .
- is an intermediate, made from two in step 1. Swap it for .
- The in step 3 reacts after the slow step, so it adds nothing. The reaction is third order overall.
To evaluate a proposed mechanism, test it twice. Its steps must add up to the overall equation, and the rate equation it predicts must match the experimental one. One mismatch rules it out. A match supports it but can't prove it, because other mechanisms might predict the same rate equation.
Try it first, then reveal one step at a time.
- Stoichiometry: B's steps add up, with cancelling. A is the equation itself.
- Kinetics: A is a single step with two and one . B's slow step has one of each.
- Both mechanisms add up to the overall equation, so both fit the stoichiometry. Mechanism A is a single step, so it predicts , second order in . This does not match the data, so A is ruled out. In mechanism B the slow step is the rate-determining step, with one and one , so it predicts , consistent with the data. This supports B but does not prove it.
Energy profiles for multistep reactions
On an , each elementary step is one hump. The peak of each hump is a transition state. The dip between two humps is an intermediate.
So a is at a maximum and can't be collected. An intermediate is at a minimum: a real species that lasts long enough to react again, and some can be detected. Two steps means two transition states and one intermediate.
Each step has its own : the climb from the energy just before that step up to its peak. The rate-determining step is the step with the largest activation energy. for the whole reaction runs from the reactants to the products.
Try it first, then reveal one step at a time.
- First step: from the reactants (0) to the first peak, .
- Second step: from the intermediate to the second peak. Start the climb at the dip, not at the reactants.
- , so the second step is slower: it is the rate-determining step.
To construct a profile from kinetic data, work out which step is rate-determining, then give that step the bigger climb. Draw one hump per step, an intermediate in each dip, and end the products below the reactants if is negative.
Try it first, then reveal one step at a time.
- Two steps, so two humps. is the intermediate.
- Step 1 has and as reactants, matching the rate equation, so step 1 is rate-determining.
- The profile has two humps, one for each step, with a transition state at each peak. The intermediate, , sits in the dip between them. Step 1 is the rate-determining step because its reactants match the rate equation, so it has the larger activation energy. The products end lower than the reactants because the reaction is exothermic.
Molecularity
The of a step can be unimolecular: one particle breaks apart or rearranges, like .
It can be bimolecular: two particles collide, like . This is the most common kind.
It can be termolecular: three particles collide at once. This is rare, because three particles seldom meet at the same instant with enough energy and the right orientation.
The first step of SN1 hydrolysis is unimolecular: a tertiary halogenoalkane breaks into a carbocation, the intermediate, and a halide ion (6.18).
Molecularity belongs to one elementary step, and is always 1, 2 or 3. For an elementary step only, each reactant's order equals the number of its particles in that step. Order belongs to the whole reaction, is measured, and can be zero.
Try it first, then reveal one step at a time.
- Count the reacting particles. Step 1: two . Step 2: and . Step 3: and .
- One step would need every particle in to collide together.
- Each step has two reacting particles, so each is bimolecular. A single step would need four particles, two and two , to collide at the same instant with enough energy and the correct orientation. That is extremely unlikely, so the reaction goes by a series of bimolecular steps.
Try it first, then reveal one step at a time.
- It is bimolecular, with one and one , so .
- Each concentration is first order, so multiply the factors.
Common mistakes
- Calling an intermediate a transition state. Intermediates sit in dips and can exist; transition states sit at peaks and can't be isolated.
- Leaving an intermediate in the rate equation. Replace it with the reactants that form it.
- Putting a reactant that joins after the slow step into the rate equation.
- Saying the data prove a mechanism. They can only support it or rule it out.
Exam tips
- "Evaluate" a mechanism: check the steps add up to the overall equation, deduce the rate equation from the slow step, compare it with the data and conclude.
- "Identify" the intermediate: it is made in one step and used in a later one. A catalyst is used first and made again.
- "Sketch" a multistep profile: label each transition state and intermediate, make the rate-determining step the largest climb, and place the products by the sign of .
- In Paper 1A, read the molecularity off one step's reactants, never its products or the overall equation.
Key takeaways
Practise this
108 past-paper questions on Rate laws, orders, Arrhenius and mechanisms in the Chemistry HL bank, each with a mark scheme and a worked explanation.