The particulate nature of matter
In a minute
All matter is built from : alone, bonded into , or physically mixed in that you can separate again. The explains solids, liquids, gases and changes of state. in measures the average kinetic energy of the particles.
You'll be able to
- Classify a substance as an element, a compound or a mixture, and a mixture as homogeneous or heterogeneous.
- Choose and outline a separation: solvation, filtration, evaporation, , or paper chromatography.
- Explain the properties of solids, liquids and gases with the particle model, name every change of state, and use .
- Convert between degrees Celsius and kelvin, link temperature to average kinetic energy, and interpret a heating curve.
Before you start3 quick questions on what this builds on
Elements, compounds and mixtures
Everything is built from about a hundred kinds of atom. A substance with only one kind is an .
A compound has new properties. Sodium is a reactive metal and chlorine a toxic gas, yet sodium chloride is table salt. A mixture keeps its parts' properties: iron filings stirred into sulfur are still magnetic.
A homogeneous mixture has the same composition throughout, in one phase: air or salt water. A heterogeneous mixture has parts you can tell apart, such as sand in water.
An such as brass is a mixture, even though metallic bonding holds it together (2.11). The proportions of copper and zinc can vary, so it has no fixed formula.
Try it first, then reveal one step at a time.
- Chlorine is , so two Cl atoms need and so .
- Sodium and chlorine each have one kind of atom: elements. Sodium chloride has both, bonded : a compound.
Try it first, then reveal one step at a time.
- Ask: how many kinds of atom, and are they bonded in a fixed ratio?
- Ozone is an element: all its atoms are oxygen. Ammonia is a compound: nitrogen and hydrogen are bonded in a fixed ratio. Air is a mixture: its gases are not bonded to each other and their proportions can vary.
Separating mixtures
The parts of a are not chemically combined, so differences in physical properties can pull them apart: whether each one dissolves, its boiling point, or how far it travels on paper.
A dissolves in a to give a solution, a homogeneous mixture. In solvation, solvent particles surround the solute particles. Dissolving one part lets you split it from parts that do not dissolve.
Filtration separates an insoluble solid from a liquid. The solid stays on the filter paper as the residue. The liquid that passes through is the filtrate.
Evaporation heats a solution to drive off the solvent, leaving the dissolved solid behind. The solvent is lost to the air.
The solvent for recrystallization must dissolve the solid well when hot but poorly when cold. Otherwise little solid crystallizes out on cooling.
Distillation keeps the solvent, which evaporation throws away. Liquids that mix completely and have close boiling points, such as ethanol and water, need fractional distillation, with a fractionating column above the flask.
separates dissolved substances, such as the dyes in an ink. The solvent rises up the paper and carries each substance a different distance (2.7).
Try it first, then reveal one step at a time.
- Use the property that differs, solubility in water, and say what each step removes.
- Add water and stir so the potassium nitrate dissolves. Filter: the charcoal stays on the filter paper as the residue. Rinse the charcoal with water and dry it in a warm oven. Evaporate water from the filtrate until potassium nitrate crystallizes, then dry the crystals.
Try it first, then reveal one step at a time.
- Percentage by mass
- Give 3 s.f., as the data allow. Damp salt would make the result too high.
States of matter and the kinetic molecular theory
The is a model: matter is made of particles that are always moving. Their spacing, motion and attractions explain the three states.
Solid: the particles are packed closely, usually in a regular pattern, and vibrate about fixed positions. Strong attractions hold them in place, so a solid keeps its shape and volume.
Liquid: the particles are still close and mostly touching, but they can slide past each other. So a liquid flows and takes the shape of its container, yet its volume stays fixed.
Gas: the particles are far apart and move fast and randomly, with very weak attractions between them. So a gas fills its container and is easy to compress.
Melting, vaporization and sublimation (solid straight to gas) absorb energy to overcome the attractions between particles: they are endothermic. Freezing, condensation and deposition (gas straight to solid) release it: they are exothermic (4.1).
Vaporization happens in two ways. Evaporation happens only at the surface, at any temperature. Boiling happens all through the liquid, at the boiling point.
give each substance's state in an equation: (s) solid, (l) liquid, (g) gas and (aq) aqueous, which means dissolved in water. So is pure liquid water, while is salt in solution.
Try it first, then reveal one step at a time.
- Gas to solid with no liquid stage is deposition. Only the state symbols change.
Try it first, then reveal one step at a time.
- Compare the space between particles in each state.
- In a gas the particles are far apart, with mostly empty space between them, so they can be pushed much closer together. In a liquid the particles are already close together and mostly touching, so there is almost no space to remove.
Temperature, kelvin and changes of state
The particles in a sample do not all move at the same speed: some are fast, some slow (5.4 shows the spread). tracks their average.
Temperature is not heat, which is energy transferred because of a temperature difference. A warm bath holds more thermal energy than a cup of boiling water, at a lower temperature.
The SI unit of temperature is the kelvin, K. A change of equals a change of , but the scale starts at absolute zero, , where particles have the least kinetic energy possible.
This conversion is in the data booklet, section 4. Many mark schemes round it to , so becomes . A kelvin temperature never takes a degree sign.
Try it first, then reveal one step at a time.
- Average is proportional to the kelvin temperature, so convert both: and .
- Factor
- Not : zero on the Celsius scale is not zero energy.
Heat a pure solid at a steady rate and record its temperature. The temperature rises, stays flat while the solid melts, rises again, then stays flat while the liquid boils.
On a flat part, the energy supplied overcomes the attractions between particles instead of speeding them up. So the average kinetic energy, and the temperature, stay the same until the change of state is complete.
A pure substance melts at one sharp temperature; an impure one usually melts over a lower range. So a melting point tests purity.
Try it first, then reveal one step at a time.
- Say where the energy goes, then link average kinetic energy to temperature.
- While the ethanol boils, liquid and gas are both present. The energy supplied is used to overcome the attractions between the molecules, not to make them move faster. So the average kinetic energy stays the same, and the temperature stays constant until all the liquid has boiled.
Common mistakes
- Writing (l) for a dissolved substance. Salt water is ; (l) is only for a pure liquid such as .
- Calling gas to solid "condensation". Gas to liquid is condensation; gas to solid is deposition.
- Taking ratios of Celsius temperatures. Convert to kelvin first.
- Suggesting a sieve to split salt from sand. Dissolve the salt, filter off the sand, then evaporate the filtrate.
- Calling an alloy a compound. Its elements mix in variable proportions, so it is a mixture.
Exam tips
- "Distinguish" element, compound and mixture: give a clear difference, such as bonded in a fixed ratio versus not chemically combined, in a variable ratio.
- "State and explain" a property with the kinetic molecular theory: pair what you see (a liquid flows) with the particle reason (particles slide past each other).
- "Suggest" a separation: give the steps in order and what each removes. A bare method name earns little.
- Paper 1A often asks you to name a change of state from an equation. Read the state symbols on both sides.
Key takeaways
Practise this
20 past-paper questions on Particles, states, mixtures and separation in the Chemistry HL bank, each with a mark scheme and a worked explanation.