5.7 · AHL · HL onlyPaper 1Paper 2

The Arrhenius equation

In a minute

Warm a reaction and its , kk, rises steeply. The links kk to temperature, so measuring kk at a few temperatures gives the . A plot of ln⁡k\ln k against 1/T1/T is a straight line: its gradient gives EaE_\text{a} and its intercept gives the , AA.

You'll be able to

  • Describe and explain how the changes with temperature.
  • Use the to calculate kk at a given temperature.
  • Analyse a plot of ln⁡k\ln k against 1/T1/T and find the activation energy from its gradient.
  • Explain what the stands for, and find it from experimental data.
Before you start3 quick questions on what this builds on
Check yourself
A reaction is run at 37 ∘C37\,^{\circ}\text{C}. What is this temperature in , to the nearest kelvin?
Check yourself
A reaction has rate=k[X][Y]2\text{rate} = k[\ce{X}][\ce{Y}]^{2}. What is the overall ?
Check yourself
What happens to the Maxwell–Boltzmann distribution of a gas when the temperature rises?

Revise first: 1.1 The particulate nature of matter, 1.9 Ideal gases, 5.3 Rates of reaction and collision theory, 5.4 Activation energy and catalysts and 5.6 Rate equations and orders of reaction

How temperature changes the rate constant

A such as rate=k[A][B]\text{rate} = k[\ce{A}][\ce{B}] has two parts: the concentrations and the , kk. Warming the mixture barely changes the concentrations, yet the rate rises sharply. So temperature acts through kk.

Over a normal temperature range the do not change. Only the value of kk does.

says why. At a higher temperature the particles have more kinetic energy. The spreads out, so a larger fraction of collisions has energy greater than or equal to the , EaE_\text{a}.

In the formula booklet
k=Ae−EaRTk = A\mathrm{e}^{-\frac{E_\text{a}}{RT}}

You don't need to memorise it: it is in the data booklet, section 1. You do need to know what each symbol means.

kk is the rate constant. AA is the , with the same units as kk. EaE_\text{a} is the activation energy in J mol−1\pu{J mol-1}. RR is the , 8.31 J K−1 mol−1\pu{8.31 J K-1 mol-1} (data booklet, section 2). TT is the temperature in .

The term e−Ea/RT\mathrm{e}^{-E_\text{a}/RT} can be read as the fraction of collisions with enough energy. It is always between 0 and 1. As TT rises, Ea/RTE_\text{a}/RT gets smaller, so the fraction grows and kk grows.

kk does not rise in a straight line. Over the temperatures used in a laboratory, it rises more and more steeply as TT increases. For the same AA, a larger EaE_\text{a} makes kk smaller. It also makes kk more sensitive to temperature.

Worked exampleA second-order reaction has A=3.60⋅1010 dm3 mol−1 s−1A = \pu{3.60e10 dm3 mol-1 s-1} and Ea=84.0 kJ mol−1E_\text{a} = \pu{84.0 kJ mol-1}. Calculate kk at 330 K\pu{330 K}.

Try it first, then reveal one step at a time.

  1. Convert EaE_\text{a} to joules: 84.0⋅103 J mol−1\pu{84.0e3 J mol-1}.
Worked exampleExplain, using collision theory and the Arrhenius equation, why the rate constant of a reaction is larger at 320 K\pu{320 K} than at 300 K\pu{300 K}.

Try it first, then reveal one step at a time.

  1. Start from the particles: what happens to their energy?
Check yourself
Which change increases the rate constant, kk, of a reaction?
Check yourself
A reaction has Ea=55.0 kJ mol−1E_\text{a} = \pu{55.0 kJ mol-1}. By what factor does kk increase when the temperature rises from 300 K\pu{300 K} to 310 K\pu{310 K}? Give 3 significant figures.

The Arrhenius plot

A curve is hard to read a value from. So take the natural log (ln⁡\ln, your calculator's ln key) of both sides of the . This gives its linear form, also in the data booklet, section 1.

In the formula booklet
ln⁡k=−EaRT+ln⁡A\ln k = -\frac{E_\text{a}}{RT} + \ln A

Compare it with y=mx+cy = mx + c. Plot y=ln⁡ky = \ln k against x=1/Tx = 1/T. The gradient is m=−Ea/Rm = -E_\text{a}/R and the intercept is c=ln⁡Ac = \ln A.

The gradient is always negative: a larger 1/T1/T means a lower temperature and a smaller kk. Rearranging gives the activation energy.

Learn this
Ea=−R×gradientE_\text{a} = -R \times \text{gradient}
Two graphs side by side. Left: rate constant k against temperature T in kelvin; a curve starts low and rises more and more steeply. Right: the Arrhenius plot, ln k against 1 over T; a straight line slopes downwards from top left to bottom right. A right-angled triangle under the line marks its gradient, labelled gradient equals minus Ea over R. The line is extended as a dashed line up to the vertical axis at 1 over T equals zero, where the intercept is labelled ln A. k rises more and more steeply k T / K Arrhenius plot: a straight line ln k 1/T / K−1 0 intercept = ln A gradient = −Ea/R
Left: kk against TT is a curve. Right: ln⁡k\ln k against 1/T1/T is a straight line.

Units: ln⁡k\ln k has none, and 1/T1/T is in K−1\pu{K-1}, so the gradient is in K. Then R×gradientR \times \text{gradient} is in J mol−1\pu{J mol-1}; divide by 1000 for kJ mol−1\pu{kJ mol-1}.

Worked exampleAn Arrhenius plot for a reaction has a gradient of −1.08⋅104 K\pu{-1.08e4 K}. Calculate the activation energy in kJ mol−1\pu{kJ mol-1}.

Try it first, then reveal one step at a time.

  1. Use gradient =−Ea/R= -E_\text{a}/R, so Ea=−R×gradientE_\text{a} = -R \times \text{gradient}.

In an experiment you measure kk at several temperatures. Work out 1/T1/T and ln⁡k\ln k for each, plot them, and draw the best-fit line. Read the gradient from two points on the line that are far apart.

Worked exampleThe rate constant of a reaction was measured at four temperatures. 295 K\pu{295 K}: 1.60⋅10−3 dm3 mol−1 s−1\pu{1.60e-3 dm3 mol-1 s-1}. 305 K\pu{305 K}: 3.42⋅10−3 dm3 mol−1 s−1\pu{3.42e-3 dm3 mol-1 s-1}. 315 K\pu{315 K}: 6.98⋅10−3 dm3 mol−1 s−1\pu{6.98e-3 dm3 mol-1 s-1}. 325 K\pu{325 K}: 1.37⋅10−2 dm3 mol−1 s−1\pu{1.37e-2 dm3 mol-1 s-1}. The points lie on a straight Arrhenius plot. Determine EaE_\text{a}.

Try it first, then reveal one step at a time.

  1. Convert the first and last points. 295 K\pu{295 K}: 1/T=3.390⋅10−3 K−11/T = \pu{3.390e-3 K-1}, ln⁡k=−6.438\ln k = -6.438. 325 K\pu{325 K}: 1/T=3.077⋅10−3 K−11/T = \pu{3.077e-3 K-1}, ln⁡k=−4.290\ln k = -4.290.

Two lines on one plot compare two reactions. The steeper line has the more negative gradient, so the larger EaE_\text{a}. Its kk changes by a larger factor for the same rise in temperature.

Arrhenius plot, ln k against 1 over T, with two straight lines that both slope downwards over the same range of 1 over T and cross near the middle. The line for reaction P is steeper than the line for reaction Q. P is labelled steeper, larger activation energy, and Q is labelled shallower, smaller activation energy. ln k 1/T / K−1 P: steeper, larger Ea Q: shallower, smaller Ea
The steeper line belongs to the reaction with the larger EaE_\text{a}.
Check yourself
On one Arrhenius plot, the line for reaction P is steeper than the line for reaction Q. What can you deduce?
Check yourself
An Arrhenius plot has a gradient of −7.45⋅103 K\pu{-7.45e3 K}. Calculate EaE_\text{a} in kJ mol−1\pu{kJ mol-1}, to 3 significant figures.

The Arrhenius factor

needs two things for a reaction: enough energy and the proper orientation. The Arrhenius equation has a part for each.

So k=A×e−Ea/RTk = A \times \mathrm{e}^{-E_\text{a}/RT} reads as (collisions with a proper orientation) ×\times (fraction with enough energy). AA has the same units as kk.

Small, simple particles can react however they meet, so most collisions have a suitable orientation and AA is large. When a particle must hit one particular atom of a large molecule, most collisions point the wrong way, so AA is smaller.

At IB level, treat AA as constant over the temperature range of an experiment, just like EaE_\text{a}.

Worked exampleReactions P and Q have the same activation energy and run at the same temperature. In P, two small, nearly spherical molecules react whichever way they meet. In Q, a small ion reacts only if it strikes one particular atom of a large molecule. Explain which reaction has the larger rate constant.

Try it first, then reveal one step at a time.

  1. Same EaE_\text{a} and TT, so the energy term e−Ea/RT\mathrm{e}^{-E_\text{a}/RT} is the same for both.

To find AA from experimental data, use the intercept of the Arrhenius plot: ln⁡A\ln A is the value of ln⁡k\ln k where 1/T=01/T = 0. That point is far from any real data, so calculate it rather than reading it off.

Put the gradient and one point on the line into ln⁡A=ln⁡k−gradient×1T\ln A = \ln k - \text{gradient} \times \frac{1}{T}, which is y=mx+cy = mx + c rearranged. Then A=eln⁡AA = \mathrm{e}^{\ln A}.

Worked exampleThe Arrhenius plot for a first-order reaction (kk in s−1\pu{s-1}) has a gradient of −9.35⋅103 K\pu{-9.35e3 K}. The line passes through 1/T=3.20⋅10−3 K−11/T = \pu{3.20e-3 K-1}, ln⁡k=−4.62\ln k = -4.62. Determine the Arrhenius factor, AA.

Try it first, then reveal one step at a time.

  1. Use c=y−mxc = y - mx with y=ln⁡ky = \ln k and x=1/Tx = 1/T.
Check yourself
In k=Ae−Ea/RTk = A\mathrm{e}^{-E_\text{a}/RT}, which part of collision theory does AA describe?
Check yourself
An Arrhenius plot has a yy-intercept (at 1/T=01/T = 0) of 21.621.6, with kk in dm3 mol−1 s−1\pu{dm3 mol-1 s-1}. Calculate AA, to 3 significant figures.

Common mistakes

  • Putting EaE_\text{a} in kJ mol−1\pu{kJ mol-1} next to R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}. Convert EaE_\text{a} to J mol−1\pu{J mol-1} first, then convert the answer back to kJ.
  • Using a Celsius temperature. TT in the Arrhenius equation is always in kelvin.
  • Dropping the minus sign. The gradient is −Ea/R-E_\text{a}/R, so Ea=−R×gradientE_\text{a} = -R \times \text{gradient}, which is positive.
  • Plotting kk against TT, or using log⁡10\log_{10}. Only ln⁡k\ln k against 1/T1/T gives the straight line whose gradient is −Ea/R-E_\text{a}/R.
  • Writing only "more collisions". The mark is for a larger fraction of collisions having energy greater than or equal to EaE_\text{a}.
  • Saying a higher temperature lowers EaE_\text{a} or changes AA. Both are treated as constant; only kk changes.

Exam tips

  • "Describe" how kk depends on temperature: kk increases as TT increases, and not in a straight line. "Explain" adds the reason: a larger fraction of collisions has energy of at least EaE_\text{a}.
  • "Outline" how to find EaE_\text{a}: measure kk at several temperatures, plot ln⁡k\ln k against 1/T1/T, and use gradient =−Ea/R= -E_\text{a}/R. Using two Arrhenius equations at two temperatures also earns the marks.
  • "Determine" EaE_\text{a} from a graph (often Paper 1B): read the gradient from two far-apart points on the best-fit line, show Ea=−R×gradientE_\text{a} = -R \times \text{gradient}, and give units.
  • "Determine" AA: the intercept at 1/T=01/T = 0 is ln⁡A\ln A, so A=einterceptA = \mathrm{e}^{\text{intercept}}. AA has the same units as kk.

Key takeaways

In bookletk=Ae−EaRTk = A\mathrm{e}^{-\frac{E_\text{a}}{RT}}
In bookletln⁡k=−EaRT+ln⁡A\ln k = -\frac{E_\text{a}}{RT} + \ln A
Learn thiskk increases with temperature, more and more steeply over laboratory temperatures. EaE_\text{a} and AA are treated as constant.
Learn thisPlot ln⁡k\ln k against 1/T1/T: gradient =−Ea/R= -E_\text{a}/R, so Ea=−R×gradientE_\text{a} = -R \times \text{gradient}; intercept =ln⁡A= \ln A.
Learn thisAA: frequency of collisions with the proper orientation, same units as kk. e−Ea/RT\mathrm{e}^{-E_\text{a}/RT}: fraction of collisions with enough energy.
Learn thisUse EaE_\text{a} in J mol−1\pu{J mol-1}, TT in K and R=8.31 J K−1 mol−1R = \pu{8.31 J K-1 mol-1}.

Practise this

108 past-paper questions on Rate laws, orders, Arrhenius and mechanisms in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Rate laws, orders, Arrhenius and mechanisms →