The periodic table and periodicity
In a minute
The periodic table lists the in order of , in periods, groups and blocks. An element's position tells you its , and the configuration tells you the position. Across a period and down a group, size, , and change in repeating patterns: this is .
You'll be able to
- Locate periods, groups, blocks, metals, metalloids and non-metals.
- Recognize the , , and .
- Deduce a configuration (up to ) from a position in the table, and the reverse.
- Explain how and change across a period and down a group.
- Explain how first ionization energy, electron affinity and electronegativity change across a period and down a group.
Before you start3 quick questions on what this builds on
Revise first: 1.1 The particulate nature of matter, 1.2 The nuclear atom and isotopes, 1.3 Emission spectra and energy levels, 1.4 Sublevels, orbitals and electron configurations, 2.1 The ionic model, 2.4 Bond and molecular polarity and 2.10 The metallic model
Periods, groups and blocks
The periodic table lists the elements in order of atomic number (data booklet, section 7). The rows are periods, numbered 1 to 7. The columns are groups, numbered 1 to 18.
The table also splits into four blocks, named after the that the highest-energy electrons are filling.
s-block: groups 1 and 2, plus helium. p-block: groups 13 to 18, apart from helium. d-block: groups 3 to 12. f-block: the two rows printed below the main table, which belong in periods 6 and 7.
Most elements are metals. They fill the left and centre of the table. Non-metals sit at the top right, and hydrogen is a non-metal too.
Between them runs a staircase of metalloids, usually B, Si, Ge, As, Sb and Te, with properties in between. Silicon is shiny like a metal, but brittle and a poor conductor.
You need four names. : group 1, except hydrogen. : group 17. : group 18.
are in the d-block: scandium to copper in period 4. Zinc is in the d-block but is not a transition element, because its d sublevel is full in both the atom and the ion.
Try it first, then reveal one step at a time.
- Element 32 is in the fourth row, so period 4, and in the column below carbon and silicon, group 14.
- Groups 13 to 18 make up the p-block.
- It sits on the staircase between metals and non-metals, so it is a metalloid.
- Period 4, group 14, p-block; a metalloid.
Try it first, then reveal one step at a time.
- Say what hydrogen shares with group 1: one , the reason it is placed there.
- Then say how it differs.
- Hydrogen has one valence electron, like the alkali metals, which is why it is placed above group 1. But hydrogen is a non-metal. It exists as molecules and is a gas at room temperature, whereas the alkali metals are reactive solid metals.
Position and electron configuration
The period number is the highest main that holds electrons. Sodium is in period 3, and its outer electron is in level 3: .
Elements in the same main group (groups 1, 2 and 13 to 18) have the same number of , apart from helium. That shared outer arrangement is why they react in similar ways.
To write a configuration from the table, walk from hydrogen to the element, period by period. In period , crossing the s-block fills s, the d-block fills d and the p-block fills p.
So period 4 fills 4s (potassium and calcium), then 3d (scandium to zinc), then 4p (gallium to krypton). Chromium and copper are the two exceptions, with ; revise them in 1.4.
Try it first, then reveal one step at a time.
- Periods 1 to 3 are complete, which is argon's 18 electrons: .
- Walk along period 4. The s-block gives . The whole d-block comes next, giving .
- Group 13 is the first p-block column, so add .
- Check: electrons, and element 31 is gallium.
- Gallium:
Try it first, then reveal one step at a time.
- The highest main level occupied is , so it is in period 4.
- The last electrons went into 3d, so it is in the d-block.
- Count along period 4: two s-block columns, then five d-block columns. That is group .
- Check: electrons, so , which is manganese.
- Manganese: period 4, group 7, d-block.
Atomic and ionic radius
Every trend in this lesson comes from a tug of war. The positive nucleus pulls on the outer electrons, and the inner electrons get in the way.
A rough estimate is the number of protons minus the number of inner electrons. Sodium gives and chlorine, in the same period, gives .
The booklet shows small exceptions, such as copper (122) after nickel (117) in period 4, and gallium (123) just below aluminium (124). Exam questions ask you to explain the general trend.
Try it first, then reveal one step at a time.
- Compare nuclear charge (16 and 12 protons), outer level (both level 3) and shielding.
- Link them to the pull on the outer electrons.
- Sulfur has more protons than magnesium, so its nuclear charge is greater. Its outer electrons are in the same main energy level as magnesium's, the third, and the shielding by inner electrons is about the same. So the effective nuclear charge is greater in sulfur, and its outer electrons are pulled closer to the nucleus.
A positive ion is smaller than its atom: () has lost sodium's only level-3 electron, so it is much smaller than Na (; data booklet, section 10).
A negative ion is larger. The extra electrons repel each other but the nuclear charge is unchanged, so is against for Cl.
, and all have the configuration . More protons pull the same electrons closer, so the falls: , , .
and have an extra occupied level, so they are far larger. Down a group, ionic radius increases: , , .
Try it first, then reveal one step at a time.
- The electrons are identical, so only the nucleus differs.
- Both ions have the same number of electrons in the same levels, so the shielding is the same. Magnesium has 12 protons but oxygen has 8 protons. So pulls its electrons closer and is smaller.
Ionization energy, electron affinity and electronegativity
The same tug of war decides how easily an atom loses or gains an electron.
For sodium, needs (data booklet, section 9). Removing an electron always takes in energy, so ionization energies are positive.
Try it first, then reveal one step at a time.
- The definition starts from gaseous atoms, so magnesium is , not .
- One electron is removed, leaving a gaseous 1+ ion.
- Check the charge: on the left, on the right.
Try it first, then reveal one step at a time.
- Bromine's outer electron is in level 4, chlorine's in level 3.
- Say why bromine's extra protons don't win, then link to the energy needed.
- Bromine's outer electron is in the fourth main energy level, so it is further from the nucleus than chlorine's. It is also shielded by more inner electrons. Bromine has more protons, but the extra distance and shielding outweigh this. So the outer electron is attracted less strongly, and less energy is needed to remove it.
For chlorine, has . Most values in the booklet are negative: the nucleus attracts the incoming electron, so energy is released.
Electron affinity generally becomes more negative across a period, as the effective nuclear charge rises, and less negative down a group, as the new electron lands further out. The halogens have the most negative values.
The pattern is less regular than for ionization energy. Fluorine () is less negative than chlorine (), because its small, crowded 2p sublevel repels the extra electron. Noble gases have no booklet value: their 1− ions are not stable.
Electronegativity, from 2.4, follows the general ionization energy trend for the same reasons. It increases across a period and decreases down a group, and fluorine has the highest value, (data booklet, section 9).
Common mistakes
- Writing a condensed configuration when the question asks for the full one. Write every sublevel from 1s unless [Ar] is allowed.
- Explaining the fall in radius across a period by "fewer shells". The number of occupied levels is the same; the rising nuclear charge with similar shielding is the reason.
- Explaining a trend down a group by nuclear charge alone. Nuclear charge rises down a group too; the extra level and extra shielding decide it.
- Writing ionization or electron affinity equations from solids or molecules. Every species is a single gaseous atom or ion, (g).
Exam tips
- "Explain" a trend: name the nuclear charge, the energy level or distance, and the shielding, then link them to the attraction on the outer electrons. Each link can be a marking point.
- "Deduce" a configuration from a position: count every block you cross, and write the full form unless the question accepts a noble-gas core.
- "State" a classification needs only the name: alkali metal, halogen, transition element or noble gas.
Key takeaways
Practise this
103 past-paper questions on Periodic table and trends in the Chemistry HL bank, each with a mark scheme and a worked explanation.