Le Châtelier's principle
In a minute
Change the conditions of a system at and the mixture shifts to partly undo the change. That is . It predicts the effect of concentration, pressure and changes, and only temperature changes the , .
You'll be able to
- Predict and explain how the position of equilibrium shifts when a concentration changes, and why stays the same.
- Predict the effect of a pressure change on a gaseous equilibrium by counting moles of gas.
- Use the sign of to predict how a temperature change moves the equilibrium and changes .
- Explain why a changes neither nor the equilibrium composition, and apply the principle to a gas dissolving in a liquid.
Before you start3 quick questions on what this builds on
Revise first: 4.1 Measuring enthalpy changes, 5.4 Activation energy and catalysts and 5.8 Dynamic equilibrium and the equilibrium constant
The principle, and changing a concentration
A at equilibrium looks still, but both reactions run at the same rate. Disturb it and the rates are no longer equal. The mixture changes until they match again, and one rule tells you which way.
The position of equilibrium is how far the mixture lies towards products. "Shifts right" means more products form; "shifts left" means more reactants.
Yellow chromate and orange dichromate ions are in equilibrium in water: . Add acid and rises. The system uses up some of the extra : the position shifts right and the solution turns orange.
Why, in terms of rates? More speeds up the forward reaction, and dichromate builds up until the backward rate matches it.
1. Add a reactant or remove a product: the position shifts right.
2. Add a product or remove a reactant: the position shifts left. Both rules are for gases and dissolved species: adding more of a pure solid or liquid does not change its concentration, so it does not shift the position. Adding water to a solution is different: it dilutes every dissolved species, which can shift the position.
The shift only partly opposes the change: A settles above its old value. And does not change. The mixture shifts until the ratio in is back to its old value, at the same temperature.
Try it first, then reveal one step at a time.
- Adding acid increases , a reactant. The system opposes this by using up some .
- So the position shifts right and more orange forms. The temperature is constant, so is unchanged.
- Adding acid increases the concentration of . The system opposes this change by using up some of the added , so the position of equilibrium shifts to the right. More orange forms. The temperature is constant, so the value of does not change.
Try it first, then reveal one step at a time.
- From the equation: .
- Before: .
- After: .
- The position shifted right ( and rose), yet is the same.
Changing the pressure or the temperature
Squeeze a gas mixture into a smaller volume and its pressure rises. The system opposes this by shifting towards the side with fewer gas molecules, which lowers the pressure a little.
1. Higher pressure, from a smaller volume: the position shifts towards fewer moles of gas. Lower pressure: towards more moles of gas.
2. Equal moles of gas on both sides: pressure has no effect on the position.
Count only gases, using the coefficients. Solids and liquids barely change volume when squeezed. At constant temperature, stays the same.
The , , given with an equation is for the forward reaction. The backward reaction has the same size of with the opposite sign.
Heat the system and it opposes the rise by absorbing heat: the endothermic direction is favoured. Cool it and the exothermic direction is favoured. Now the ratio of products to reactants really changes, so changes.
Try it first, then reveal one step at a time.
- is positive, so the forward reaction is endothermic.
- A temperature rise favours the endothermic direction, which absorbs heat.
- So the position shifts right: more brown , less , and a larger .
- The forward reaction is endothermic. Increasing the temperature favours the endothermic direction, which absorbs heat and so opposes the change. The position of equilibrium shifts to the right, so more brown forms and the colour darkens. The value of increases.
Try it first, then reveal one step at a time.
- "Predict and explain": give each direction with its reason.
- (a) Moles of gas: on the left, 1 on the right. Higher pressure favours the right. Temperature is unchanged, so is too.
- (b) , so the backward reaction is endothermic. Heating favours it, so the position shifts left and falls.
- (a) There are 3 moles of gas on the left and 1 on the right. Higher pressure shifts the position of equilibrium to the right, towards fewer moles of gas, so the yield of methanol increases. is unchanged. (b) The forward reaction is exothermic, so higher temperature favours the endothermic backward reaction. The position shifts to the left, the yield of methanol decreases, and decreases.
Catalysts, and gases dissolving
A lowers the activation energy of the forward and backward reactions by the same amount. Both rates rise by the same factor, so they stay equal. The position and don't change: equilibrium is just reached sooner.
Try it first, then reveal one step at a time.
- Say what the catalyst does to each direction: it lowers both activation energies by the same amount.
- Both rates rise equally, so the equilibrium composition is the same.
- Then say what does change: the time taken to reach equilibrium.
- The catalyst lowers the activation energy of the forward and backward reactions by the same amount. It increases the rates of both reactions equally. So the position of equilibrium does not change, and is unchanged. Equilibrium is reached faster, but the amount of ammonia at equilibrium is the same.
The principle also applies to heterogeneous equilibria, with species in different phases. A gas dissolving in a liquid is one: .
Raise the pressure of the gas above the liquid and more dissolves; lower it and gas comes out of solution. Dissolving most gases is exothermic, so warmer water holds less dissolved gas.
Try it first, then reveal one step at a time.
- One substance in two phases: gas, and dissolved (aqueous).
- It goes both ways, so use the equilibrium arrow: .
- With the cap off, gas escapes and the pressure of above the liquid falls.
- The position shifts left: dissolved comes out as bubbles.
Common mistakes
- Saying changes when a concentration or the pressure changes. The position moves, but only temperature changes .
- Thinking the shift fully cancels the change. It only partly opposes it: an added reactant ends above its old concentration.
- Saying a catalyst increases the equilibrium yield. It speeds up both reactions equally, so only the time to reach equilibrium changes.
- Counting solids and liquids when predicting the effect of pressure. Count moles of gas only.
Exam tips
- "Predict and explain" earns marks for the direction and for the reason. Write both: "shifts right AND fewer moles of gas on the right".
- "State the effect on ": write "no change" for a concentration, pressure or catalyst change. For temperature, use the sign of .
- Paper 1A often pairs two changes in a table. Decide each change separately, then pick the row where both push the same way.
Key takeaways
Practise this
40 past-paper questions on Le Chatelier's principle in the Chemistry HL bank, each with a mark scheme and a worked explanation.