Electrolysis of aqueous solutions and electroplating
In a minute
In an aqueous , water competes with the ions of the dissolved salt. tell you which wins: a metal or hydrogen at the , a halogen or oxygen at the . uses the same kind of cell to coat an object with a thin layer of metal.
You'll be able to
- Deduce from standard electrode potentials whether a metal or hydrogen forms at the cathode, and whether a halogen or oxygen forms at the anode.
- Write the half-equations for the reduction and the oxidation of water.
- Explain how concentration and the electrode material change the products when water and sodium chloride solution are electrolysed.
- Describe how an is set up for electroplating, and deduce the equations at each electrode.
Before you start3 quick questions on what this builds on
Revise first: 1.6 The mole and molar mass, 1.8 Concentration and Avogadro's law, 3.3 Oxidation states, 6.2 The pH scale and Kw, 6.8 Oxidation, reduction and half-equations, 6.10 Primary and secondary cells, 6.11 Electrolytic cells and 6.13 Standard electrode potentials
Competing reactions at the electrodes
A molten salt (6.11) holds just two kinds of . A solution also holds water, which can be reduced or oxidized too.
So at each electrode two reactions compete, and the easier one happens. Standard electrode potentials (data booklet, section 19) tell you which.
At the cathode (−), the metal cation competes with water, which is reduced to hydrogen:
So and give the metal. Group 1 and 2 ions and give hydrogen. The ions made raise the near the cathode.
In acidic solution, ions are reduced instead: . The product is still hydrogen.
At the anode (+), the anion competes with water, which is oxidized to oxygen:
Sulfur in () and nitrogen in () are at their highest oxidation states, so they cannot lose more electrons.
Try it first, then reveal one step at a time.
- The competitors are () and water ().
- Water's value is more positive, so water is reduced: hydrogen forms, not lithium.
- Two give one and two . Charge: on each side.
Try it first, then reveal one step at a time.
- Cathode: compare / () with water ().
- Anode: compare / () with / ().
- At the cathode, copper(II) ions have a more positive than water, so copper ions are reduced and copper is deposited. At the anode, the bromide half-equation is less positive than that of water, so bromide ions are oxidized and bromine forms.
Water and sodium chloride solution
Pure water has too few ions to conduct well. So a little sodium sulfate or dilute sulfuric acid is added; these ions carry the current but do not change the products.
Hydrogen forms at the cathode and oxygen at the anode. Make the electrons equal, then add the half-equations.
Try it first, then reveal one step at a time.
- Cathode, in acid: . Anode: .
- Double the cathode equation so both have , then add.
- and appear on both sides, so they cancel.
The equation gives twice as many of hydrogen as oxygen. Equal amounts of gas fill equal volumes at the same temperature and pressure (), so twice the volume of hydrogen collects.
Sodium chloride solution holds , and water. At the cathode, () cannot compete with water, so hydrogen forms.
At the anode, / () is only a little above / (). values are for solutions, so when two are this close, concentration decides.
In brine, the ions and the ions made at the cathode stay in solution, so sodium hydroxide is a third product: .
Try it first, then reveal one step at a time.
- Name the two species that could be oxidized, with their values.
- Then say how the chloride concentration tips the balance each way.
- Chloride ions and water can both be oxidized at the anode, and their values are close: and . In concentrated solution, the high concentration of chloride ions favours their oxidation, so chlorine is the main product. In very dilute solution there are few chloride ions, so water is oxidized and oxygen forms.
The electrode material matters too. Graphite and platinum are inert. A metal anode that is oxidized more easily than anything in the solution reacts itself, and dissolves.
With a copper anode in sodium chloride solution, / () is far below chloride and water. So happens, and no gas forms at the anode.
Electroplating
A thin coat of metal can stop steel rusting, or make a cheap object look like silver. Electrolysis puts that coat on.
1. The object is the cathode, joined to the negative terminal. Ions of the coating metal are reduced there and coat it.
2. The anode is a bar of the coating metal. It is oxidized and dissolves, making new ions of that metal.
3. The electrolyte is an aqueous solution of a salt of the coating metal, such as its sulfate or nitrate.
So the concentration of stays constant, and so does the green colour. Ideally, the anode loses as much mass as the cathode gains.
The rules from the first section explain why this works. The coating metal's must be above , or hydrogen would form. The metal anode is oxidized more easily than water, so it dissolves instead of giving oxygen.
Try it first, then reveal one step at a time.
- The can is the cathode, so reduction happens on it.
- / () is more positive than water (), so tin is deposited, not hydrogen.
- At the tin anode the reverse happens: .
Try it first, then reveal one step at a time.
- Write what happens at each electrode, with its half-equation.
- Compare how fast ions are made and used. Then ask what an inert anode would oxidize.
- At the cathode, copper(II) ions are reduced to copper, which coats the clip. At the copper anode, copper atoms are oxidized to copper(II) ions. The anode replaces the ions at the same rate as the cathode removes them, so their concentration stays constant and the colour does not fade. With a graphite anode, water would be oxidized to oxygen instead, so the copper(II) ions would be used up and the colour would fade.
Common mistakes
- Giving a group 1 or 2 metal, or aluminium, as the cathode product from a solution. Water is reduced instead, so the product is hydrogen.
- Saying sulfate or nitrate ions are oxidized. Water is oxidized far more easily, so oxygen forms.
- Giving only oxygen, or only chlorine, for sodium chloride solution. State the concentration: concentrated gives chlorine, dilute gives mainly oxygen.
- Putting the object to be plated at the anode. It must be the cathode, where the metal ions are reduced.
Exam tips
- "Deduce" the products of an aqueous electrolysis: quote the section 19 values for both competitors at each electrode, say which is reduced or oxidized, and name the element formed (hydrogen gas, not ).
- Paper 1A: check for water first. A solution never gives a group 1 or 2 metal, and sulfate or nitrate gives oxygen.
- "Deduce the equations" for electroplating: reduction of the metal ion at the cathode, oxidation of the metal at the anode, each balanced in atoms and charge.
Key takeaways
Practise this
103 past-paper questions on Electrolysis, batteries and fuel cells in the Chemistry HL bank, each with a mark scheme and a worked explanation.