3.5 · AHL · HL onlyPaper 1Paper 2

Coloured transition element complexes

In a minute

A of a is coloured because its split the 3d orbitals into two sets with different energies. An electron absorbs visible light to jump the gap, and you see the of the light absorbed. The colour wheel in the data booklet turns one colour into the other.

You'll be able to

  • Explain why transition element complexes are coloured, using and the promotion of an electron.
  • Explain why ions with an empty or a full 3d sublevel form colourless compounds.
  • Use the colour wheel to go from the colour absorbed to the observed, and back, with .
  • Calculate the frequency and energy of the light absorbed, and compare the splitting in complexes from their colours.
Before you start3 quick questions on what this builds on
Check yourself
In a complex ion, what does each ligand give to the central metal ion to form its bond?
Check yourself
Iron has atomic number 26. How many 3d electrons does an FeX3+\ce{Fe^3+} ion have?
Check yourself
Light P has a wavelength of 430 nm and light Q a wavelength of 690 nm. Which has of higher energy?

Revise first: 1.3 Emission spectra and energy levels, 1.4 Sublevels, orbitals and electron configurations, 2.2 Covalent bonds and Lewis formulas, 2.10 The metallic model, 3.3 Oxidation states and 3.4 Ionization energy trends and transition elements

Why complexes are coloured

A solution of hydrated copper(II) ions looks blue, but a solution of zinc ions is colourless. The difference lies in the 3d electrons of the metal ion, and in what the ligands do to them.

In a , each (HX2O\ce{H2O}, NHX3\ce{NH3}, ClX−\ce{Cl^-} …) donates a lone pair to the central ion. This forms a (3.4).

In [Fe(HX2O)X6]X2+\ce{[Fe(H2O)6]^2+} six water molecules each form one bond, so the is 6.

In an isolated ion, all five 3d orbitals have the same energy. In a complex, the ligands' lone pairs repel the d electrons. The d orbitals that point most directly at the ligands are pushed up in energy more than the others.

The five 3d orbitals of an isolated ion have equal energy. In a complex ion they split into a lower set of three and an upper set of two, separated by an energy gap. A photon of visible light with energy equal to the gap is absorbed and promotes an electron from the lower set to the upper set. Energy Isolated ion: five 3d orbitals, equal energy In a complex ion (six ligands) upper set lower set electron promoted ΔE visible photon absorbed, photon energy = ΔE
This pattern is for six ligands. Other numbers of ligands give other patterns, which you don't need to learn.

An electron in the lower set can absorb a whose energy exactly equals ΔE\Delta E. The electron is promoted to the upper set. For most complexes, ΔE\Delta E matches the energy of photons of visible light.

So the complex removes some visible from white light. The rest pass through the solution (or reflect off the solid) and reach your eye. You see the colour of the light that is left.

Colour from promoting a d electron needs a partially filled 3d sublevel, from 3d1\mathrm{3d^{1}} to 3d9\mathrm{3d^{9}}. Write the ion's to check, removing 4s electrons before 3d.

With no 3d electrons (3d0\mathrm{3d^{0}}, as in ScX3+\ce{Sc^3+}), there is nothing to promote. With a full sublevel (3d10\mathrm{3d^{10}}, as in ZnX2+\ce{Zn^2+} and CuX+\ce{Cu^+}), the upper set has no space. Either way no visible light is absorbed, so their complexes are white or colourless.

Beyond the syllabus: a few 3d0\mathrm{3d^{0}} and 3d10\mathrm{3d^{10}} species are still coloured, such as purple MnOX4X−\ce{MnO4^-} and red copper(I) oxide, because they absorb light in a different way, not by promoting a d electron. Exam questions on d orbital splitting use ions like ScX3+\ce{Sc^3+} and ZnX2+\ce{Zn^2+}.

The gap must also match visible light. In anhydrous copper(II) sulfate, CuSOX4\ce{CuSO4}, the CuX2+\ce{Cu^2+} ions are surrounded by sulfate ions, not water. The gap these ligands make does not match visible light, so the solid is white. Add water and it turns blue.

Worked exampleA solution containing [Fe(HX2O)X6]X2+\ce{[Fe(H2O)6]^2+} is pale green. Explain why this complex ion is coloured.

Try it first, then reveal one step at a time.

  1. Fe is [Ar] 4s2 3d6\mathrm{[Ar]\,4s^{2}\,3d^{6}}. Remove the two 4s electrons: FeX2+\ce{Fe^2+} is [Ar] 3d6\mathrm{[Ar]\,3d^{6}}, a partially filled sublevel.
Worked exampleCopper(I) chloride, CuCl\ce{CuCl}, is white, but most copper(II) compounds are coloured. Explain this difference using electron configurations.

Try it first, then reveal one step at a time.

  1. Cu is [Ar] 4s1 3d10\mathrm{[Ar]\,4s^{1}\,3d^{10}}. Losing the 4s electron gives CuX+\ce{Cu^+}: [Ar] 3d10\mathrm{[Ar]\,3d^{10}}.
Check yourself
Vanadium has atomic number 23. How many 3d electrons does a VX3+\ce{V^3+} ion have?
Check yourself
Which ion forms colourless complexes?

Using the colour wheel

The data booklet (section 15) gives a colour wheel with a range for each colour. Colours directly opposite each other are complementary: red and green, orange and blue, yellow and violet.

Colour wheel with six sectors and their wavelength ranges. Opposite sectors are complementary: red and green, orange and blue, yellow and violet. Red 647–700 nm Orange 585–647 nm Yellow 575–585 nm Green 491–575 nm Blue 424–491 nm Violet 400–424 nm Complementary colours sit directly opposite each other
The colour wheel, as in section 15 of the data booklet. Absorb one colour and you see the opposite it.

Absorbed to observed: find the absorbed wavelength in its sector, then go straight across the wheel. Observed to absorbed works the same way. The opposite sector also gives you the range of wavelengths absorbed.

To turn a wavelength into a frequency, use the wave equation from section 1 of the data booklet, as in 1.3. Here c=3.00⋅108 m s−1c = \pu{3.00e8 m s-1} (section 2), and λ\lambda must be in metres: 1 nm=1⋅10−9 m\pu{1 nm} = \pu{1e-9 m}.

In the formula booklet
c=fλc = f\lambda
Worked exampleA transition element complex absorbs light most strongly at 615 nm. Deduce the colour of the complex, and calculate the frequency of the light absorbed.

Try it first, then reveal one step at a time.

  1. 615 nm lies in the orange sector (585–647 nm), so orange light is absorbed.
Worked exampleA complex appears orange. Use the colour wheel to deduce the range of wavelengths it absorbs. Then calculate the frequency at the short-wavelength end of that range.

Try it first, then reveal one step at a time.

  1. Observed orange, so the absorbed colour is the one opposite: blue.
Check yourself
A complex absorbs light most strongly at 455 nm. What colour does it appear?
Check yourself
Calculate the frequency of light of wavelength 530 nm. Give your answer in units of 1014 s−110^{14}\ \pu{s-1}, to 3 s.f.

Bigger gap, different colour

The photon absorbed has energy ΔE=hf\Delta E = hf (data booklet, section 1), with h=6.63⋅10−34 J sh = \pu{6.63e-34 J s} (section 2). A larger gap needs a higher-energy photon. That means a higher frequency and a shorter wavelength.

In the formula booklet
E=hfE = hf

Combining E=hfE = hf with c=fλc = f\lambda gives ΔE=hcλ\Delta E = \frac{hc}{\lambda} for one ion. Multiply by NAN_\text{A} for a mole of ions.

The size of the gap depends on the metal, its and the ligands. So swapping one ligand for another changes the colour. You deduce which gap is larger from the colours or wavelengths, not from a list.

Worked example[Cr(HX2O)X6]X3+\ce{[Cr(H2O)6]^3+} is violet and [Cr(NHX3)X6]X3+\ce{[Cr(NH3)6]^3+} is yellow. Deduce, with reasons, which complex has the larger d orbital splitting.

Try it first, then reveal one step at a time.

  1. Use the wheel for each complex: violet observed means yellow absorbed; yellow observed means violet absorbed.
Worked exampleA complex absorbs light most strongly at 505 nm. Calculate the energy gap ΔE\Delta E, in J, between the two sets of d orbitals in one ion.

Try it first, then reveal one step at a time.

  1. ΔE=hf=hcλ\Delta E = hf = \frac{hc}{\lambda}, with λ=505×10−9 m\lambda = 505 \times 10^{-9}\ \text{m}.
Check yourself
Changing the ligand makes the d orbital splitting in a complex larger. What happens to the wavelength of light it absorbs?
Check yourself
Complex A absorbs most strongly at 440 nm and complex B at 620 nm. Calculate ΔEA/ΔEB\Delta E_\text{A} / \Delta E_\text{B}, to 3 s.f.

Common mistakes

  • Saying a complex emits its colour. It absorbs some visible light and you see the rest.
  • Swapping absorbed and observed. Go straight across the colour wheel before you name the colour seen.
  • Calling ZnX2+\ce{Zn^2+} or CuX+\ce{Cu^+} coloured because they are d-block ions. A full 3d sublevel leaves no space to promote an electron into.
  • Ending an explanation with "the complementary colour is seen" but never saying the gap matches visible light. That point earns its own mark.
  • Using λ\lambda in nanometres in c=fλc = f\lambda. Convert to metres first.

Exam tips

  • "Explain why a complex is coloured" (often 3 marks): partially filled d orbitals; ligands split the d orbitals; an electron absorbs light and is promoted; the gap matches visible light. Write one point per sentence.
  • "Deduce" a colour or wavelength: name the absorbed colour and its range from section 15, then the colour observed opposite it.
  • "Calculate" a frequency or energy: show f=cλf = \frac{c}{\lambda} with λ\lambda in metres, then give 3 s.f. with units (s−1\pu{s-1} or J).
  • In Paper 1A, read each option for absorbed or emitted and for which colour is absorbed: those are the usual traps.

Key takeaways

Learn thisLigands split the 3d orbitals into two sets. An electron absorbs a visible photon of energy ΔE\Delta E and is promoted to the upper set; you see the complementary colour.
Learn thisColour from promoting a d electron needs a partially filled 3d sublevel and a gap in the visible region. 3d0\mathrm{3d^{0}} (ScX3+\ce{Sc^3+}) and 3d10\mathrm{3d^{10}} (ZnX2+\ce{Zn^2+}, CuX+\ce{Cu^+}) ions form colourless complexes.
Learn thisColour wheel (section 15): opposite colours are complementary, red–green, orange–blue, yellow–violet.
Learn thisLarger splitting: higher frequency, shorter wavelength absorbed. ΔE=hf=hcλ\Delta E = hf = \frac{hc}{\lambda}, with λ\lambda in metres.

Practise this

76 past-paper questions on Transition elements and complexes in the Chemistry HL bank, each with a mark scheme and a worked explanation.

Practise Transition elements and complexes →