Electrolytic cells
In a minute
An uses electrical energy from a DC power supply to force a redox reaction that would not happen on its own. Electrons carry the current in the wires; moving carry it in the . In a molten salt, the metal forms at the and the non-metal at the .
You'll be able to
- Describe an as a cell that converts electrical energy into chemical energy by driving a non-spontaneous reaction.
- Name the parts of an electrolytic cell, and say which electrode is the anode and which the cathode.
- Explain how current is conducted, and when an ionic compound can act as an .
- Deduce the products of electrolysing a molten salt, and write the half-equations.
Before you start3 quick questions on what this builds on
Revise first: 1.2 The nuclear atom and isotopes, 2.1 The ionic model, 3.3 Oxidation states, 6.8 Oxidation, reduction and half-equations and 6.10 Primary and secondary cells
What an electrolytic cell does
In a (6.10), a spontaneous redox reaction pushes electrons round a circuit. Chemical energy becomes electrical energy.
Some reactions are non-spontaneous: they do not happen on their own. To force one, a power supply pushes electrons in.
Driving a reaction this way is called electrolysis. The products store the energy put in. Every electrolytic cell has three parts.
1. A DC (direct current) power supply, such as a battery. It pushes electrons one way only.
2. Two electrodes, usually inert graphite or platinum: they conduct but do not react. The is joined to the positive terminal, and the to the negative terminal.
3. An that both electrodes dip into.
The electrode rule is the same as in every electrochemical cell: oxidation at the anode, reduction at the cathode. Only the signs differ: here the anode is positive, while in a voltaic cell it is negative.
Try it first, then reveal one step at a time.
- Similarity: the electrode rule is the same in both.
- Differences: the direction of the energy change, and whether the reaction goes by itself.
- In both cells, oxidation happens at the anode and reduction at the cathode. A voltaic cell converts chemical energy into electrical energy. Its redox reaction is spontaneous, so the cell itself supplies a current. An electrolytic cell converts electrical energy into chemical energy. Its reaction is non-spontaneous, so an external DC power supply must drive it.
Try it first, then reveal one step at a time.
- The salt must be liquid, so heat it until it melts (about 250 °C).
- Name each of the three parts, then use the terminals to name the electrodes.
- Heat solid tin(II) chloride in a crucible until it melts, in a fume cupboard because chlorine forms. Dip two inert graphite electrodes into the molten salt, not touching each other. Connect them to a DC power supply. The electrode joined to the positive terminal is the anode, and the one joined to the negative terminal is the cathode.
How the current flows
A current is a flow of charge. In an electrolytic cell, a different particle carries it in each part of the circuit.
In the wires and electrodes, move, as in any metal or graphite. In the , move. Electrons do not travel through the electrolyte.
Opposite charges attract. (positive) move to the negative . (negative) move to the positive .
At the electrode surfaces the two flows join up. Cations take electrons from the cathode and are . Anions give electrons to the anode and are . The power supply pumps those electrons through the wires from the anode to the cathode.
Try it first, then reveal one step at a time.
- Name the carrier in each part: wires and electrodes, then the molten salt.
- Say where each ion goes, and what happens to it at the electrode.
- In the wires and graphite electrodes, delocalized electrons carry the current. In the molten salt, the ions carry it: ions move to the negative cathode and ions move to the positive anode. At the cathode, ions gain electrons and are reduced. At the anode, ions lose electrons and are oxidized. The power supply moves electrons through the external circuit from the anode to the cathode.
So when can an ionic compound act as an electrolyte? Its ions must be free to move, the condition for (2.1).
In the solid, the ions are fixed in a lattice. Molten or dissolved in water, they can move. A liquid made only of neutral molecules, such as , has no ions, so it is not an electrolyte. (Pure water ionizes very slightly, so it conducts only very weakly.)
Try it first, then reveal one step at a time.
- Classify each substance: ionic or molecular?
- Ask whether each liquid has charged particles that can move.
- Calcium chloride is an ionic compound. When it melts, its and ions are free to move, so they carry the charge to the electrodes and the liquid conducts. Tetrachloromethane is made of neutral covalent molecules. It has no ions and no delocalized electrons, so there are no charged particles to carry a current, and it is not an electrolyte.
Products from a molten salt
A molten salt of a metal and a non-metal holds just two kinds of , so there is one product at each electrode.
1. Write the ions and their charges.
2. At the (−), the metal cation gains electrons and forms the metal.
3. At the (+), the non-metal anion loses electrons and forms the element. Halide ions give diatomic halogens, such as ; oxide ions give .
4. Write each , balanced in atoms and charge. To get the overall equation, make the electrons equal, then add.
confirm it. For molten , zinc goes from to , so it is reduced. Chlorine goes from to , so it is oxidized.
Try it first, then reveal one step at a time.
- The ions are and .
- Cathode: , so lithium forms there.
- Anode: each bromide ion loses one electron. Two Br atoms join as , so two ions release two electrons, and bromine forms there.
- Check the charge: on the left, and on the right.
Try it first, then reveal one step at a time.
- Cathode: .
- Anode: .
- Both half-equations already use , so add them. The electrons cancel, and the ions recombine as .
- States at 400 °C: lead(II) bromide and lead are liquids; bromine is a gas.
Common mistakes
- Saying electrons flow through the molten electrolyte. Ions carry the charge there; electrons stay in the wires and electrodes.
- Making the anode negative, as in a voltaic cell. In electrolysis it is joined to the positive terminal, and oxidation still happens there.
- Giving the ion as the anode product ("chloride", ). The product is the element, .
- Putting the metal at the anode. Metal cations are positive, so they move to the negative cathode.
Exam tips
- "Annotate" a cell diagram: label the anode (+) and cathode (−) from the terminal each is joined to, and draw arrows for cations moving to the cathode and anions to the anode.
- "Explain how current is conducted": name both carriers (electrons in the external circuit, ions in the electrolyte) and say what happens at each electrode.
- "Deduce" the products of a molten salt: name the element at each electrode (bromine, not bromide), and give half-equations balanced in atoms and charge.
Key takeaways
Practise this
103 past-paper questions on Electrolysis, batteries and fuel cells in the Chemistry HL bank, each with a mark scheme and a worked explanation.