IGCSE Physics 0625 notes › Electricity and magnetism › Cheat sheet
Electricity and magnetism cheat sheet
BOOKLET given in the examLEARN you must remember it · Each block links to its lesson.
Electricity and magnetism
IGCSE PHYSICS 0625 · Extendedpastpaperprep.com/revision-notes
4.1Simple phenomena of magnetism
Like poles repel; unlike poles attract. A magnet attracts unmagnetised magnetic materials at either pole, so only repulsion proves an object is a magnet.LEARN
Magnetic materials (iron, steel, nickel, cobalt) are attracted by a magnet and can be magnetised. Non-magnetic materials, including copper and aluminium, are not.LEARN
Induced magnetism: a magnetic material near a magnet becomes a magnet, with the opposite pole at the end nearest the magnet's pole.LEARN
Soft iron is easy to magnetise and loses its magnetism easily (temporary magnets, electromagnet cores). Steel is harder to magnetise but keeps its magnetism (permanent magnets).LEARN
A magnetic field is a region where any magnetic pole feels a force. Its direction is the direction of the force an N pole would feel there.LEARN
Outside a bar magnet, field lines run from N to S, never cross, and crowd together at the poles. Plot them with a compass, or show the pattern with iron filings.LEARN
The closer together the field lines, the stronger the field. Magnetic forces come from the interaction between magnetic fields.LEARN
4.2.1Electric charge
There are two kinds of charge, positive and negative. Like charges repel; unlike charges attract.LEARN
Charging a solid by rubbing moves only electrons. Gain electrons: negative. Lose electrons: positive.LEARN
Repulsion proves an object is charged. Attraction doesn't, because a charged object also attracts small uncharged objects.LEARN
Conductors (metals, graphite) have free electrons that carry charge through them. Insulators (plastic, rubber, glass, dry wood) have none, so charge cannot flow through them.LEARN
Charge is measured in coulombs (C). An electric field is a region where a charge experiences a force. Its direction at a point is the way a positive charge there would be pushed.LEARN
Field patterns: straight radial lines around a point charge or outside a charged sphere (outwards for +, inwards for −). Between oppositely charged parallel plates: straight, parallel, evenly spaced lines from + to −.LEARN
4.2.2Electric current
Electric current is a flow of charge, measured in amperes (A). .LEARN
In a metal, the current is free electrons drifting along the wire. The positive ions stay in place and only vibrate.LEARN
An ammeter measures current and is connected in series. Choose the smallest range bigger than the expected current; if you can't estimate it, start on the largest range.LEARN
d.c. flows in one direction only (cells, batteries). a.c. keeps reversing direction (mains supply). A current that changes size but never reverses is still d.c.LEARN
LEARN
Current is the charge that passes a point each second. Round the circuit outside the supply, conventional current flows from + to −, and free electrons flow from − to +.LEARN
4.2.3Electromotive force and potential difference
E.m.f.: the electrical work a source does on each unit of charge it moves round a complete circuit. Measured in volts (V).LEARN
P.d.: the work done by each unit of charge as it passes through a component. Measured in volts (V), between two points. .LEARN
A voltmeter measures p.d. (or e.m.f.) and is connected in parallel. Choose the smallest range bigger than the expected p.d., and read the scale that matches the terminal used.LEARN
LEARN
LEARN
4.2.4Resistance
LEARN
A resistor at constant temperature has a constant resistance: the current in it is directly proportional to the p.d. (Ohm's law).LEARN
To measure resistance: ammeter in series, voltmeter in parallel across the resistor, a variable resistor to get several readings; calculate for each and take the mean.LEARN
Wires of the same metal at the same temperature: longer means more resistance (same thickness); thicker means less resistance (same length).LEARN
LEARN
I–V graphs ( on the vertical axis): resistor at constant temperature, straight line through the origin; filament lamp, curve getting less steep as the filament heats and its resistance rises; diode, almost no current in reverse, current rises steeply in the forward direction.LEARN
4.2.5Electrical energy and electrical power
A circuit transfers energy from its source (a cell or the mains) to its components, and they transfer it to the surroundings. The current is not used up; the energy ends up spread out in the surroundings.LEARN
LEARN
LEARN
When a steady power is given, the energy transferred is . With in W and in s, is in J.LEARN
One kilowatt-hour is the energy transferred by a appliance in hour: . It is a unit of energy, not power.LEARN
Cost of electricity: energy in kW h (power in kW time in hours) price per kW h.LEARN
4.3.1Circuit diagrams and circuit components
Circuit diagrams use the standard symbols, with wires drawn as straight lines and a dot at each junction.LEARN
Rectangle symbols: fixed resistor (empty), variable resistor (straight arrow through it), potential divider (arrow onto its side), thermistor (diagonal line with a flat foot), LDR (two arrows pointing in), heater (sections inside), fuse (line along its length).LEARN
NTC thermistor: its resistance falls as its temperature rises. LDR: its resistance falls as the light on it gets brighter.LEARN
With the supply p.d. unchanged, more resistance in a series circuit means a smaller current.LEARN
Fuse: its thin wire melts when the current rises above its rating, breaking the circuit. Relay: a small current in its coil closes a switch in a second circuit that carries a large current.LEARN
Potential divider: connected across a supply, it shares the supply p.d.; with a sliding contact, and the output taken between one end and the slider, it gives any p.d. from zero to the full supply p.d. Transformer: changes the size of an alternating p.d., and works only with a.c.LEARN
Diode: current passes only when its triangle points along the conventional current; in reverse almost no current flows. LED: a diode that gives out light when current passes in the forward direction.LEARN
4.3.2Series and parallel circuits
Series circuit: one loop, so the current is the same at every point.LEARN
LEARN
Cells in series that all face the same way: add their e.m.f.s. A cell turned the other way subtracts its e.m.f.LEARN
Parallel circuit: the source supplies more current than any one branch carries. Two resistors in parallel have a combined resistance less than either one by itself.LEARN
Lamps in a lighting circuit are wired in parallel: each can be switched on its own, the rest stay lit if one breaks, and each gets the full supply p.d.LEARN
Total current into a junction = total current out, because charge is not used up or stored there. Series: the p.d.s across the components add up to the total p.d. Parallel: each branch has the same p.d. as the whole arrangement.LEARN
LEARN
4.3.3Action and use of circuit components
For a constant current, the p.d. across a conductor is larger when its resistance is larger (). In series, the component with the larger resistance has the larger p.d.LEARN
Sensor in series with a fixed resistor across a fixed supply p.d.: if the sensor's resistance rises, the current falls, so the p.d. across the fixed resistor falls and the p.d. across the sensor rises.LEARN
LEARN
Variable potential divider, output taken between one end of the track and the slider: moving the slider sets the output p.d. anywhere from zero up to the full supply p.d.LEARN
4.4Electrical safety
Mains circuit: the live wire carries the high alternating p.d., the neutral wire stays near , and the earth wire joins a metal casing to the ground.LEARN
The switch and the fuse go in the live wire, so switching off or a melted fuse disconnects the appliance from the high p.d.LEARN
Hazards: damaged insulation (electric shock; also fire from a short circuit), overheating cables (fire), damp conditions (shock), overloaded sockets or extension leads (large total current, overheating, fire).LEARN
A fuse melts, and a trip switch opens, when the current goes above its rating or setting. A trip switch can be reset. Choose the smallest available rating above the appliance's normal current, .LEARN
A metal casing must be earthed. A double-insulated appliance has a non-conducting casing and no earth wire, but still has a fuse, which protects the circuit and the cable.LEARN
4.5.1Electromagnetic induction
An e.m.f. is induced in a conductor when it cuts across magnetic field lines, or when the magnetic field through it changes. No relative movement and no change in the field means no e.m.f.LEARN
An induced e.m.f. drives an induced current only if the conductor is part of a complete circuit.LEARN
Demonstration: move a magnet in and out of a coil joined to a sensitive centre-zero meter. The needle deflects only while the magnet moves, opposite ways for in and out.LEARN
With everything else kept the same, the induced e.m.f. is bigger for faster movement, a stronger magnet or more turns on the coil. Reversing the movement (at the same speed) or the magnet reverses the e.m.f. but does not change its size.LEARN
Lenz's law: an induced e.m.f. acts in the direction that opposes the change causing it. A coil in a complete circuit repels an approaching pole and attracts a leaving one.LEARN
Fleming's right-hand rule, for a wire, motion and field all at right angles: thumb = motion, first finger = field (N to S), second finger = induced conventional current. The force on the induced current opposes the motion.LEARN
4.5.2 ◆The a.c. generator
Rotating-coil a.c. generator: the coil turns in a magnetic field, its sides cut field lines, and the induced e.m.f. reverses every half turn.LEARN
Slip rings turn with the coil, and fixed brushes press on them. They connect the turning coil to the circuit without the wires twisting; they do not make the current alternate.LEARN
Rotating-magnet generator: the field through a fixed coil reverses every half turn of the magnet, giving an alternating e.m.f. The coil doesn't move, so no slip rings are needed.LEARN
Rotating coil: the e.m.f. is zero when the plane of the coil is at right angles to the field lines, and is a peak or trough when it is parallel to them.LEARN
In a simple generator (one coil, two poles), one turn of the coil gives one cycle of e.m.f., so the frequency equals the number of turns each second.LEARN
With everything else kept the same: faster turning gives taller peaks and a higher frequency; a stronger magnet or more turns on the coil gives taller peaks at the same frequency.LEARN
4.5.3Magnetic effect of a current
A current makes a magnetic field. Around a long straight wire, the field lines are circles centred on the wire, at right angles to it.LEARN
Right-hand grip rule: thumb along the conventional current, fingers curl the way the field goes. Reverse the current and the field reverses.LEARN
A solenoid's field is like a bar magnet's, with straight, parallel lines inside it, away from the ends. Seen from one end, anticlockwise conventional current makes that end N; clockwise makes it S.LEARN
Plot the field with plotting compasses, which show pattern and direction. Iron filings show the pattern only.LEARN
Relay: a small current magnetises the coil's soft-iron core, which attracts an armature and closes contacts in a large-current circuit.LEARN
Loudspeaker: an alternating current in the coil makes a reversing field that interacts with a permanent magnet's field, so the coil and cone vibrate and make sound.LEARN
The field is strongest close to a wire, and strong and nearly uniform inside a solenoid. A bigger current gives a stronger field; a reversed current reverses it.LEARN
4.5.4Force on a current-carrying conductor
Motor effect: a conductor carrying a current across a magnetic field feels a force. The force is biggest when the current crosses the field lines at 90°, and zero when it runs along them.LEARN
Demonstration: a metal rod on rails, or a loose wire, between the poles of a magnet and connected to a d.c. supply. It moves when the current is switched on.LEARN
Reversing the current, or reversing the field, reverses the force. Reversing both leaves the force in its original direction. Reversing does not change the size of the force.LEARN
The force is at 90° to the current and at 90° to the field. Fleming's left-hand rule, for a current crossing the field at 90°: first finger = field (N to S), second finger = conventional current, thumb = force.LEARN
A beam of charged particles moving across a magnetic field is deflected. Positive particles: current in their direction of motion. Electrons and beta particles: current opposite to their motion. Charges at rest, or moving along the field lines, feel no magnetic force.LEARN
4.5.5The d.c. motor
A coil carrying a current in a magnetic field has forces in opposite directions on its two sides, which can turn it. The turning effect is biggest when the plane of the coil lies along the field lines, and zero when it is at right angles to them.LEARN
The turning effect on the coil is increased by more turns on the coil, a bigger current or a stronger magnetic field. Reversing either the current or the field reverses the direction of turning, not its size; reversing both leaves the direction unchanged.LEARN
In a d.c. motor the split-ring commutator reverses the coil's current every half turn, as the coil passes the position at right angles to the field. So the turning effect always acts the same way and the coil keeps turning in one direction.LEARN
The brushes are fixed contacts that press on the turning commutator. They connect the coil to the supply without the wires twisting.LEARN
4.5.6The transformer
A transformer is two coils of insulated copper wire on a soft-iron core. It works only with a.c., because only a changing magnetic field induces a voltage in the secondary.LEARN
Step-up: more turns on the secondary than the primary, so the output voltage is bigger. Step-down: fewer turns on the secondary, so the output voltage is smaller.LEARN
LEARN
Transmission: a step-up transformer at the power station, step-down transformers near the users. For the same power, raising the voltage lowers the current, so less energy is wasted heating the cables and thinner, cheaper cables can be used.LEARN
How it works: a.c. in the primary makes a changing magnetic field; the soft-iron core links it to the secondary; the changing field induces an alternating e.m.f. across the secondary.LEARN
LEARN
LEARN
Which method when
'Test whether a steel bar is a magnet' → bring each end of it near each pole of a known magnet: repulsion proves it is a magnet; attraction proves nothing, because a magnet attracts unmagnetised steel at either pole (4.1)LEARN
'Deduce the charge on each object' from which ones attract or repel → start from the object whose charge you know: repulsion means the same sign; attraction between two charged objects means opposite signs, but a charged object also attracts an uncharged one (4.2.1)LEARN
'State the reading' on an analogue ammeter or voltmeter → use the scale for the terminal in use; one small division = the gap between two labelled marks ÷ the number of divisions in it; count on from the labelled mark below the pointer, to the nearest half division, looking straight at the pointer (4.2.2, 4.2.3)LEARN
'Calculate the current' in one loop of cells and resistors → add the e.m.f.s of the cells facing the same way (subtract any turned round) and add the resistances, then with the total e.m.f. and the total resistance; the current is the same at every point in the loop (4.3.2)LEARN
'How do the meter readings change when it gets darker (or warmer)?' for a sensor in series with a fixed resistor and a fixed supply → chain the links: sensor's resistance, total resistance, current, then for the fixed resistor; a voltmeter across the sensor changes the opposite way to the fixed resistor's p.d. (4.3.1, 4.3.3)LEARN
'Calculate the cost of running an appliance' with the power in W or the time in minutes → change to kW and hours first, multiply them to get the energy in kW h, then multiply by the price per kW h (4.2.5)LEARN
'Which fuse should be fitted?' given the appliance's power and the mains p.d. → find the normal current with (power in W), then choose the smallest available rating above it, never the nearest one below (4.4)LEARN
'Which way does the meter needle swing now?' after the magnet or its motion is changed → count the reversals from the first test: reversing the pole or the direction of motion swings it the other way, doing both cancels out, and a magnet held still gives no reading (4.5.1)LEARN
'Which end of the solenoid is the N pole?' → look at that end: anticlockwise conventional current makes it N, clockwise makes it S; or curl your right-hand fingers round the turns with the conventional current and your thumb points to N (4.5.3)LEARN
'Calculate the output voltage' or 'the number of turns needed' for a transformer → write , rearrange for the unknown, then check the direction: fewer turns on the secondary must give a smaller output voltage (step-down) (4.5.6)LEARN
◆Which method when
'Calculate the p.d.' when the energy, the current and the time are given → find the charge first with (current in A, time in s), then (4.2.3)LEARN
'Same metal, same length, twice the diameter: find the new resistance' → the area changes by the diameter factor squared (), and , so the resistance is a quarter (4.2.4)LEARN
'Find the p.d. across one of two resistors in series across a supply' when no current is given → split the supply p.d. in the ratio of the resistances, with = the supply p.d.; the larger resistor takes the larger share (4.3.3)LEARN
'Which pole forms at this end of the coil?' as a magnet moves near a coil in a complete circuit → use Lenz's law: the coil opposes the change, so an approaching pole meets a like pole (repelled) and a leaving pole meets an unlike pole (attracted) (4.5.1)LEARN
'Determine the direction of the force' on a wire or a beam of charged particles crossing a magnetic field → mark the field from N to S and the conventional current (opposite to the motion of electrons or beta particles), then use Fleming's left-hand rule; the force is at 90° to both, and a current along the field lines feels none (4.5.4)LEARN
'Find the frequency' from the e.m.f.–time graph of a simple a.c. generator (one coil, two poles) → count the complete cycles and divide by the time they take; one cycle is one turn of the coil, so this is also the number of turns each second (4.5.2)LEARN
'The transmission voltage is doubled, for the same power: what happens to the power wasted in the cables?' → halves the current, then in the same cable gives a quarter of the wasted power (4.5.6)LEARN
Follows the Cambridge IGCSE Physics 0625 syllabus (2026 to 2028). Not affiliated with Cambridge.