Electricity and magnetism
16 lessons · 1 Extended only · 493 past-paper questions in the 0625 Extended papers
● CORE AND EXTENDED
15 lessonsA magnet has a north pole and a south pole: like poles repel and unlike poles attract. A magnet also attracts iron and steel by making them into magnets. Around every magnet is a magnetic field, which you can map with a compass or iron filings.
Objects can carry positive or negative electric charge: like charges repel and unlike charges attract. Rubbing two materials together moves electrons from one to the other, which is how a plastic rod or a balloon gets charged. Metals let charge move through them because they have free electrons; plastics, rubber and glass don't.
An electric current is a flow of charge. In a metal wire the charge is carried by free electrons drifting along the wire. You measure current in amperes with an ammeter: a cell gives a current that flows one way only, while the mains supply's current keeps reversing.
A cell does work on the charge it pushes round a circuit: the work it does on each coulomb is its electromotive force (e.m.f.). The charge then does work in each component: the work per coulomb there is the potential difference (p.d.). Both are measured in volts, with a voltmeter connected in parallel.
Resistance tells you how hard it is to push a current through a component: R = V/I, measured in ohms (Ω). You find it with an ammeter and a voltmeter, and a metal wire has more resistance when it is longer or thinner.
A circuit carries energy from a cell or the mains to its components, which pass it on to the surroundings. Electrical power P = IV says how fast that happens, and the electrical energy transferred is E = IVt. Electricity companies charge you per kilowatt-hour: the energy a 1 kW appliance transfers in 1 hour.
A circuit diagram shows each part of a circuit as a standard symbol, joined by straight lines for the wires. You need to recognise and draw every symbol, and know what each part does: supply energy, switch or control the current, sense temperature or light, give out light, heat, movement or sound, or protect the circuit.
In a series circuit the parts form one loop, so the same current passes through each, and resistances add, as do the e.m.f.s of cells facing the same way. In a parallel circuit the current splits between branches, and each extra branch lowers the combined resistance. The lamps in a house are wired in parallel so each can be switched on its own and the rest stay lit if one breaks.
When the same current passes through two conductors, the one with more resistance has the larger p.d. across it, because V = IR. That is why the components of a series circuit share the supply p.d. according to their resistances, and why a sensor such as an LDR changes the meter readings in its circuit. Extended students also use the ratio rule for a potential divider and learn how a slider gives any p.d. from zero up to the supply.
Mains electricity can kill by electric shock and can start fires. Mains circuits use three wires, live, neutral and earth, with the switch and the fuse in the live one. Fuses and trip switches cut the current when it gets too large, and a casing is either earthed or made of an insulator.
Move a wire across a magnetic field, or change the field through a coil, and an e.m.f. appears in it. This is electromagnetic induction, and it is how a power-station generator works. Faster movement, a stronger magnet and more turns on the coil all give a bigger e.m.f.
A current in a wire makes a magnetic field around it: circles round a straight wire, and a pattern like a bar magnet's round a solenoid. Your right hand gives the field's direction. Relays and loudspeakers both work by this magnetic effect of a current.
A wire carrying a current across a magnetic field feels a force. This is the motor effect. Reverse the current or the field and the force reverses; reverse both and it does not. Extended students also find the direction of the force, for wires and for beams of charged particles.
A coil carrying a current in a magnetic field has forces in opposite directions on its two sides, so it can turn. More turns, a bigger current or a stronger field give a bigger turning effect. A d.c. motor uses this; Extended students also learn how its commutator and brushes keep it turning one way.
A transformer is two coils of wire on a soft-iron core. It changes the size of an alternating voltage: more turns on the output coil than on the input coil give a bigger voltage, fewer turns a smaller one. The grid uses transformers to send electricity along cables at a very high voltage, so the current is small and less energy is wasted heating the cables.
◆ EXTENDED ONLY
1 lessonsAn a.c. generator turns a coil in a magnetic field, or turns a magnet beside a coil. The induced e.m.f. reverses every half turn, so the output is alternating. Slip rings and brushes connect a turning coil to the outside circuit, and the coil's position tells you where the peaks and zeros of the e.m.f.–time graph fall.